Used Automatic Stacker for sale (23,701)

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 1,003 h, load capacity: 1,200 kg, lifting height: 2,924 mm, fuel type: electric, mast type: simplex, construction height: 2,015 mm, fork length: 1,150 mm, drive type: Elektro, High lift truck Mast type: Standard Redpoukrgbofx Ahzjbt Technical condition: good

Condition: used, functionality: fully functional, Year of construction: 2010, operating hours: 2,029 h, load capacity: 1,400 kg, lifting height: 3,910 mm, fuel type: electric, mast type: simplex, construction height: 2,380 mm, fork length: 1,150 mm, drive type: Elektro, High-lift stacker Mast type: Standard Technical condition: normal Redpfx Aeukrh Sohzobt Front tyres type: Solid rubber (bandage) Front tyres condition: 60 - 80% Rear tyres type: Solid rubber (bandage) Rear tyres condition: 40 - 60% Battery voltage: 24V Battery capacity: 250Ah Battery year: 2010 Description: The machine will be partially repainted if required, workshop-serviced and UVV-inspected. Prices for this are available on request. Damage: Mast and fork carriage slightly worn, machine scratched, dented and rusted all around.

Condition: used, functionality: fully functional, Year of construction: 2002, operating hours: 7,458 h, load capacity: 1,600 kg, lifting height: 3,822 mm, fuel type: electric, mast type: simplex, construction height: 2,380 mm, fork length: 1,150 mm, empty load weight: 1,222 kg, drive type: Elektro, High lift truck Rsdpsukrhlofx Ahzsbt Mast type: Standard Technical condition: normal Front tires Type: Bandages Front tires Condition: 40 - 60% Rear tires Type: Bandages Rear tires Condition: 60 - 80% Battery Volt: 24V Battery Ah: 250Ah Battery manufacturer: IBH Battery year of construction: 2019 Battery condition: 60 - 80% Description: The device may be partially painted, workshop and UVV tested. Prices for this are available on request.

Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 4,585 h, load capacity: 1,600 kg, lifting height: 4,200 mm, fuel type: electric, mast type: simplex, construction height: 2,580 mm, fork length: 1,150 mm, drive type: Elektro, High-lift truck Mast type: Standard Technical condition: normal Front tire type: Band tire Front tire condition: 40 - 60% Rear tire type: Band tire Rbedpfoukrivjx Ahzot Rear tire condition: 40 - 60% Battery volt: 24V Battery Ah: 345Ah Battery year: 2025 Damages: Mast and fork carriage slightly worn out. Device temporarily not operational. Right lift cylinder leaking. Cover of left lift cylinder broken. Nameplate missing. Device scratched, dented and rusted all around.

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 20 h, load capacity: 1,400 kg, lifting height: 4,000 mm, free lift: 1,390 mm, fuel type: electric, mast type: triplex, construction height: 1,830 mm, fork length: 1,150 mm, drive type: Elektro, High-lift stacker Mast type: Triplex Technical condition: very good Battery voltage: 24V Battery capacity: 225Ah Battery year: 2023 Description: The machine will be partially repainted if necessary, workshop- and UVV-inspected. Prices for this are available upon request. Proportional lifting and lowering. Rodpfoukrnlsx Ahzjbt

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 875 h, load capacity: 1,600 kg, lifting height: 3,744 mm, free lift: 150 mm, fuel type: electric, mast type: duplex, construction height: 2,365 mm, fork length: 1,150 mm, drive type: Elektro, Pedestrian stacker Load centre: 600 Mast type: Duplex Condition: Ready for use and fully functional Technical condition: good Front tyre type: Polyurethane Rear tyre type: Polyurethane Battery voltage: 24V Battery capacity: 375Ah Battery year of manufacture: 2018 Description: Rbsdpfxoyfx Suo Ahzet electric steering

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 201567-1, Year of construction: 2018, load capacity: 40,000 kg, fuel type: electric, overall weight: 2,200 kg, Technical details Rjdoyfw I Iopfx Ahzebt overall dimensions approx. (L x W x H): 8000x1900x800 mm weight approx.: 7,200 kg

Condition: excellent (used), Year of construction: 2014, CNC-swiss type automatic lathe brand: STAR type: SV-38R new in: 2014 equipped with: FANUC 31i control, turret with B, Y, X, and Z axis, driven tools, 2x C-axis, Y2 axis, subspindle, high pressure pump, oil mist, backworking, chip conveyor, parts conveyor, Rjdpfx Asvgulvjhzsbt fire extinguishing system, useable for short and long parts automatic bar loader FMB TURBO 5-55

Condition: used, Year of construction: 2002, machine/vehicle number: A0207001, -with belt cleaning at the machine outlet under a folding table with belt conveyor. In 2021, the PLC control, the touch screen control, and the frequency converter for the spraying-gun drive were replaced. - Manufacturer: Venjakob - Type: HGS-Duo/C - Retrofit 2026 (year of manufacture 2002) - Working width 1,300 mm - Operating side right - Price for refurbished machine - Current condition, in the refurbishment phase - Gun drive in duo design - Dry extraction - Exhaust air capacity 10,000 m³/h - Extraction nozzle diameter 500 mm - Belt conveyor system - Feed speed approx. 5 and 14 m/min - With belt cleaning system - With paint recovery via V-belt system - Gun control, touch screen Rbjdpox Ihvvefx Ahzot - Installed color circles 1 pc. - 4 Airelss sprayers, Krautzberger KAA1300 - 1 HD airless pump - Supply air filter ceiling - Suitable for water-based paints - Suitable for solvent-based paints - Control cabinet integrated into the machine. - Total connection ~ 19kW - Length: 6,485mm - Width: 3,690 mm - Height: 2,497 mm - Volts, Hz 400 / 50 - Color light gray 7035 + black - Location, in stock - Voltage fluctuations max. +/- 5% The pictures are examples of an unrefurbished spray machine of the same type. _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in touch with us!

Condition: good (used), machine/vehicle number: b11400099, Year of construction: 2015, operating hours: 17,817 h, lifting height: 15,100 mm, fuel type: diesel, mast type: telescopic, power: 265 kW (360.30 HP), color: blue, Year of manufacture: 2015 Empty weight: 77.960 kg Lifting capacity: 45.000 kg Maximum passing height: 4.600 mm CE mark: yes Technical condition: good Visual appearance: good Rjdpfjyfv U Tsx Ahzsbt Damages: none Emissions class: Stage IIIB Rearview mirrors, 2 pieces Armrest right side Tinted and laminated glass with sliding windows in doors Electrically adjustable console Windshield washers and wipers on front, rear, and roof window Ergonomic joystick Forward and reverse shifting integrated into joystick Automatic increase in RPM when lifting and extending Separate tanks for hydraulic and brake oil Flexible scale and synchronous lifting Reverse buzzer Wheel nut protection ECO/Normal/Power driving mode, EDM mode Air-suspended seat, partial leather upholstery, 3-point belt, and seat heating Raised air intake including pre-filter (pre-cleaner) Additional LED work lights on spreader, 2 pieces Air conditioning ECC Sliding cab Automatic 20-30 and 40ft stop Rearview camera Central lubrication (base + spreader) Engine: Volvo TAD 1360VE turbo diesel engine, stage 3B Transmission: ZF 5WG261

Condition: excellent (used), machine/vehicle number: B11402074, Year of construction: 2023, operating hours: 2,651 h, lifting height: 15,100 mm, fuel type: diesel, mast type: telescopic, power: 265 kW (360.30 HP), color: red, Year of manufacture: 2023 Empty weight: 77.960 kg Lifting capacity: 45.000 kg Maximum passing height: 4.600 mm CE mark: yes Technical condition: very good Visual appearance: very good Emissions class: Stage V Rearview mirrors, 2 pieces Armrest right side Tinted and laminated glass with sliding windows in doors Electrically adjustable console Windshield washers and wipers on front, rear, and roof window Ergonomic joystick Forward and reverse shifting integrated into joystick Automatic increase in RPM when lifting and extending Separate tanks for hydraulic and brake oil Flexible scale and synchronous lifting Reverse buzzer Wheel nut protection ECO/Normal/Power driving mode, EDM mode Air-suspended seat, partial leather upholstery, 3-point belt, and seat heating Raised air intake including pre-filter (pre-cleaner) Additional LED work lights on spreader, 2 pieces Air conditioning ECC Rodpfjyfv U Hjx Ahzsbt Automatic 20-30 and 40ft stop Rearview camera Central lubrication (base + spreader) Motor : Volvo TAD 1181VE turbo diesel motor, stage 5 Transmissie : TE 30510

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: 24xx, For sale is a used but fully functional D6 with a turret; the machine was still in production up until it was shut down. The sale of the machine excludes any kind of guarantee or warranty! Sold as seen! Rbsdpfex Nphcex Ahzot

Year of construction: 2009, condition: excellent (used), Fortuna A 4 Automatic Bun Divider - used - year of manufacture: 2009 - weight range: 30–120 g - machine from production Rbjdsw Spqbepfx Ahzot - technically inspected - very good technical condition - 2 working trays - collection from warehouse / shipping option available - price on request

Condition: like new (used), functionality: fully functional, Year of construction: 2026, operating hours: 8 h, machine/vehicle number: 2026BD25, bending angle (max.): 190 °, overall weight: 1,000 kg, total length: 1,800 mm, total width: 850 mm, total height: 1,230 mm, power: 8 kW (10.88 HP), input voltage: 380 V, type of input current: AC, warranty duration: 12 months, control cabinet height: 1,200 mm, Single - Head Servo CNC Pipe Bending Machine BD25CNC3A1S Machine Model: BD25CNC3A1S Machine Applications  Transportation Sector For locomotives, automobiles, and bicycles: exhaust manifolds, brake lines, fuel supply conduits, steering mechanisms, air - conditioning ducting systems, seating assemblies, balancing components, bumper structures, window frame assemblies, handlebar components, and frame structures.  Furniture Industry Indoor and outdoor seating and table sets, office furniture including desks and chairs, shelving units, bed frames and associated furniture pieces.  Leisure and Recreation Industry Fitness apparatus, infant strollers, utility carts, and amusement ride installations.  HVAC (Heating, Ventilation, and Air - Conditioning) and Appliance Industry Water heating units, electric heating appliances, gas - fired cooktops, refrigeration units, and air - conditioning equipment.  Heavy Industrial Sphere Piping networks for boilers, heat exchanger, power generation plants, chemical processing facilities, diesel engine manufacturing, and Rsdjyak E Nspfx Ahzsbt shipbuilding operations.  Diverse Other Industries Household consumer goods, rehabilitation - oriented medical devices, sanitary fixtures, the decoration and interior design sector, the construction industry, agricultural machinery and equipment, and the aviation manufacturing and maintenance industry. Maximum Bending Pipe Diameter × Wall Thickness (Normal Steel, Aluminum, Copper etc.) Φ25mm×1.2mm Maximum Bending Radius R150mm Maximum Bending Angle 190° Maximum Feeding Length 1200mm Working Speed: Bending Speed Max. 150°/s Working Speed: Pipe Rotating Speed Max. 200°/s Working Speed: Feeding Speed Max. 1000mm/s Working Precision: Bending Precision ±0.1° Working Precision: Pipe Rotating Precision ±0.1° Working Precision: Feeding Precision ±0.1mm Data Transmission Mode 1. Coordinates (X.Y.Z) 2. Working Values (Y.B.C) Bending Mode Servo Bending

Condition: not inspected (used), Year of construction: 2006, functionality: unexamined, machine/vehicle number: 5601-0267, turning diameter: 33 mm, overall weight: 4,200 kg, rotational speed (max.): 8,000 rpm, travel distance Z-axis: 320 mm, Equipment: bar feeder, TECHNICAL DETAILS Turning diameter: 33 mm Z-axis travel: 320 mm Rbodjyfqt Dopfx Ahzjt Rapid traverse (X/Z): 30 m/min Max. ejection: approx. 190 mm Max. spindle speed: 8,000 rpm Tool stations: 5+3 MACHINE DETAILS Control: GE Fanuc Series 16i-T Drive power: 5.5 / 7.5 kW Dimensions & Weight Required space (L x W x H): 3.08 x 1.51 x 1.75 m Machine weight: 4,200 kg EQUIPMENT Iemca bar feeder

Condition: used, Automatic start-stop shear manufactured by PROIN. It allows for cutting adjusted to the following specifications: - Strip width: 300 to 2050 mm - Material thickness: 2 – 10 mm - Tensile strength (Rm): maximum 600 MPa - Cutting length: 400 – 1200 mm The cutting speed varies depending on the strip's thickness: - Thickness ≤ 5 mm: 36 m/min - Thickness ≥ 5 mm and ≤ 10 mm: 18 m/min Material width: 300 – 2.050 mm Material thickness: 2 - 10 mm Rbjdpexdcylefx Ahzot Tensile strength (Rm): maximum 600 MPa Length: 400 – 12.000 mm

Condition: used, Automatic packing machine Manufacturer : MAIR Model : .90.D.5.SL Automatic strapping machine with automatic wood support insertion Manufacturer: ITIPACK Model: SKE/M/TS-31 J-WILT/4MR Working range Diameter round: 16 - 90 mm Rbodjvtp Hbjpfx Ahzjt Thickness range: 0.8 - 5.0 mm Length: 3,5 - 10 m INCLUDING - Rollway (aprox.24m) with 2 sections - MAIR .90/D/5/SL, for hexagonal & rectangular bundles - Bundle lateral conveyor to strapping - AUTOMATIC Strapping machine ITIPACK with wood insertion - Longitudinal chain conveyor of strapped bundles - Bundle weighting and emulsion draining station - Bundles transversal chain for storage section - Electrical control and operator control panel Thickness: 0.8 - 5.0 mm Tube diameter: 16 - 90 mm Length: 3,5 – 10 m Rectangular bundle: 200 x 200 mm - 650 x 520 mm Hexagonal bundle: 230 x 200 mm - 600 x 520 mm Bundle weight: 3 Tn

Year of construction: 1996, condition: used, Schütte SF 26S DNT YOM 1996 Number of spindles: 6 Max bar diameter [mm]: 26 Auto bar loader: Cucchi BLT Multi-6 - (YOM 2015) Cross slide pos. 1, 3, 4, 6 Rbedpfx Aei Hb Szohzot CN slide pos 2, 5 Spindle stop attachment for main spindles Bar feeding pos. 6 Pickup spindle pos. 6 High pressure coolant system Chip conveyor, hinged belt type Oil mist filter ISI RON/A 2500A, ID 26295

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 1 h, load capacity: 1,200 kg, lifting height: 2,510 mm, fuel type: electric, mast type: simplex, construction height: 1,700 mm, fork length: 1,200 mm, drive type: Elektro, High-lift stacker Load centre: 600 Mast type: Standard Condition: Ready for use and fully operational Technical condition: Good Rbsdpfx Aeycmzrohzjt Battery voltage: 24V Battery year: 2020 Battery condition: 80 - 100% Description:

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, Bean-to-cup coffee machine Gaggia La Solare 2ES3RM, year of manufacture 2024, cleaning required, Serial no. 25021334, dimensions (LxWxH) 368x586x783 mm, weight 47 kg, bean container capacity: 1200g each, instant container capacity: 1.5L each, up to 250 cups per day, fully automatic fresh milk or milk powder system (depending on model), robust ceramic grinder & two bean containers, large touchscreen with intuitive operation. Rodpfjwt R Husx Ahzsbt

Condition: excellent (used), Year of construction: 2013, operating hours: 6,000 h, functionality: fully functional, TRAUB TNL 18 – CNC Swiss-Type & Short-Turn Lathe Ex Works, previously used in medical technology, rejection rate 0.3% Machine Type: TNL 18 Machine Number: 6050338 Year of Manufacture: 2013 Condition: Used, very well maintained, productive in current use Included: High-pressure coolant system (KSS) + bar feeder Spindles & Machining Main spindle: motor spindle Max. bar capacity main spindle: 18 mm (optionally 20 mm) Max. main spindle speed: 12,000 rpm Max. torque: up to 10.5 Nm C-axis resolution: 0.001° Counter spindle: available Max. bar capacity counter spindle: 18 mm Max. counter spindle speed: 12,000 rpm C-axis counter spindle: yes Tooling System Upper turret: 8 stations Axes: X / Y / Z / B / H Lower turret: 7 stations Axes: X / Y / Z / H Rear tooling device: 7 stations Max. simultaneous tools in cut: 3 Tool capacity: Standard: 22 Maximum (with multiple holders): up to 52 tools Axes & Dynamics Number of CNC linear axes: 7 Rapid traverse: up to 40 m/min (Z) Large travel ranges for Swiss-type and short-turn operation Simultaneous machining with main and counter spindle: yes Rjdpjycl Udsfx Ahzebt Coolant & High-Pressure Coolant tank: approx. 500 l Standard pressure: 3 / 8 bar High-pressure (option, included): up to 20 bar Flow rate: approx. 28 l/min Filtration fineness: 50 μm Electrical Data Rated voltage: 400 V / 3~ / N / PE Rated current: 56 A Max. fuse protection: 63 A Rated power: 35 kW Connection load: 24 kVA Frequency: 50 Hz Control voltage: 24 V DC Dimensions & Weight Machine dimensions (L × W × H): approx. 3060 × 1480 × 2420 mm Weight: approx. 4,300 kg Summary (listing short text) TRAUB TNL 18, year 2013 CNC Swiss-type & short-turn lathe Main and counter spindles 2 turrets + rear tooling device High-pressure coolant included Bar feeder included Very rigid production machine Rejection rate only 0.4% Ideal for precision and series production I am selling the following machines: TRUMARK 3010 (TMS 1000) – Laser marking – 2011 US-Bad X-tra pro 300 US (MF2) Flex2 – Cleaning / Ultrasonic cleaning – 2015 Mollart Drillsprint – Gun drilling machine / Deep hole drilling – 1996 Traub TNL 26 – Swiss-type lathe – 2004 Traub TNL 26 – Swiss-type lathe – 2007 Traub TNL 26 – Swiss-type lathe – 2009 Traub TNL 18 – Swiss-type lathe – 2013 Traub TNL 18 – Swiss-type lathe – 2014 Star SV-20R – Swiss-type lathe – 2019 Traub TNL18-9P – Swiss-type lathe – 2015 Traub TNL18 – Swiss-type lathe – 2014 Traub TNL18-9 – Swiss-type lathe – 2013 OTEK CF 1x18 T – Vibratory finishing system – 2011 Rösler FKS 04.1 E Sa-So – Vibratory finishing system – 2020 Grinding bench DP07 – Grinding & polishing (implants) – 1986 Turntable blasting unit Rösler RWT 1000-I – Blasting cabin – 2012 Bending machine C 202 M – Bending – 1990 Schmidt hydro-pneumatic press – Press / hydro-pneumatic press – 2021

Condition: used, machine/vehicle number: IC1301, Year of construction: 2019, operating hours: 3,108 h, load capacity: 1,400 kg, lifting height: 4,100 mm, construction height: 2,600 mm, enginetype: Electric, manufacturer: Jungheinrich Rbjdpfx Ahjyflx Uozot

Condition: used, machine/vehicle number: 15503, Year of construction: 2018, operating hours: 2,637 h, load capacity: 1,400 kg, lifting height: 4,780 mm, free lift: 1,620 mm, load center: 600 mm, construction height: 2,060 mm, fork length: 1,150 mm, overall weight: 1,239 kg, enginetype: Electric, manufacturer: Still Rbedpsyflnvsfx Ahzot

Condition: excellent (used), The Plockmatic MPS (Multi-Purpose Stacker) XL is designed as a flexible and cost-effective stacking solution, specifically compatible with several Konica Minolta AccurioPress print engines. Supported models include: AccurioPress C14000 Enhanced Series, AccurioPress C12000, AccurioPress C7100, AccurioPress C7090, AccurioPress C4080, and AccurioPress C4070. This stacker is integrated to work seamlessly with these machines, enabling efficient stacking, lifting, and transport of printed sheets, including high volumes and long sheets when connected to additional stackers such as the LS-507. Rjdpfx Aeych Slohzsbt

Condition: used, Year of construction: 2005, operating hours: 214 h, lifting height: 2,920 mm, fuel type: electric, mast type: duplex, fork length: 1,150 mm, total height: 1,820 mm, total length: 1,900 mm, total width: 800 mm, color: other, Empty weight: 960 kg Lifting capacity: 1.200 kg Rbjdpfswgv Spsx Ahzot - Year: 2005 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: B846X042120 - Operating hours: 214 - Type: Pedestrian stacker - Lifting capacity: 1200kg - Lifting height: 2920mm - Overhead clearance: 1820mm - Free lift: 0mm - Fork length: 1150mm - Fork width: 570mm - Mast: Duplex - Drive: Electric - Brand/Type: Midac - Battery voltage: 24V - Transport dimensions: 1900mm x 800mm x 1820mm (l x w x h) - Transport weight [kg]: 960kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom