Used Automatic Stacker for sale (24,534)

Condition: used, Electric pedestrian stacker, low-floor pallet truck, ant, pedestrian stacker JUNGHEINRICH type EME 112 Machine no. No.: 90145339 Year of construction 2005 Rated capacity: 1200 kg Lifting height: 200 mm Fork length: 1170 mm Operating voltage: 24 Volt Total length: 1550 mm Overall width: 700 mm Overall height with drawbar: 1300 mm Ksdpfx Asu Emggjhgsnb - 2 drive batteries NEW from year of manufacture 2024, type 12 Volt, Ah 55 - integrated automatic charger, type E 230 G 24/6 (24 Volt, 6 Ampere) Weight: approx. 175 kg good condition

Condition: good (used), Year of construction: 2021, operating hours: 1,463 h, load capacity: 1,600 kg, lifting height: 2,344 mm, fuel type: electric, mast type: duplex, construction height: 1,665 mm, empty load weight: 1,400 kg, mileage: 1,463 km, Electric duplex stacker Brand: Still Year of manufacture: 2021 ONLY 1,462 operating hours Capacity: 1,600 kg Lifting height: 2,344 mm Mast height: 1,665 mm Equipped with FREELIFT Battery: 2021 Automatic filling system Kjdozv Uz Sjpfx Ahgjnb Equipped with an external charger Watch the video on YouTube

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, punching force: 330 t, Machine for punching, embossing, waste removal, and blank separation - as is - System equipped with a high-performance sheet feeder designed for automatic NON-STOP operation ⦁ For fully automatic punching, creasing, and embossing with or without gripper edge ⦁ For removal of internal waste as well as lateral and rear sheet edges ⦁ For stack-like delivery of punched and waste-removed sheets with attached gripper edges or ⦁ For separation of gripper edges and subsequent stack-like delivery of the remaining sheets ⦁ With a patented gripper carriage registration system for highest registration accuracy ⦁ With a pile stacker machine enabling fully automatic interleaving sheet feed as well as NON-STOP stacking and does not require modification even for the smallest job sizes (exchange table with comb structure) ⦁ Interleaving sheet magazine with electronic level monitoring, refillable during production ⦁ With Centerline equipment ⦁ With automatic pallet change device at the delivery section Specification Kedpfx Asww E Nrshgonb Maximum sheet size: 760 x 1060 mm Minimum sheet size: 350 x 400 mm Maximum punching force: 3.3 MN (330 t) Speed: 9,000 sheets/hour Processable materials: Paper min. 80 g/m² Cardboard up to 2000 g/m² Corrugated board up to 3 mm (max. sheet warp 4%) Equipment: Optical sheet register (Dyset) Automatic non-stop feeder Waste removal station Blank separation station Centerline Fully automatic pallet changing device at delivery Incl. platform Quick-lock frames at all tooling stations

Condition: used, This listing is for 1 of 2 Spectramax M2 Microplate readers These units are in full working condition and is ready for immediate use Overview The SpectraMax M2 (and enhanced M2e) from Molecular Devices is a high-performance multi-mode microplate reader designed for flexible detection in life science applications. It combines absorbance, fluorescence, and optional luminescence in a compact benchtop instrument ideal for ELISA, DNA/protein quantification, enzyme kinetics, and cell-based assays. Key Features Multi-detection capability: Supports absorbance, fluorescence (top-read), and with the M2e, adds bottom-read fluorescence, luminescence, and time-resolved fluorescence (TRF). Top- and bottom-read fluorescence: Bottom-read only on the M2e for enhanced cell-based assay sensitivity. Dual-mode cuvette port: Enables standard spectrophotometry outside of microplate format. Dual monochromators: Selectable excitation and emission wavelengths (1 nm increments) without the need for filters. PathCheck® Technology: Automatically normalizes optical pathlengths for absorbance, ensuring accurate, cuvette-equivalent readings. Well volume sensor: Prevents errors from low-volume or uneven well filling. Instrument and software validation: Compatible with SoftMax® Pro software for data analysis and 21 CFR Part 11 compliance, supporting regulated lab environments. Robot compatible: Integration-ready with automation systems and plate stackers for high-throughput workflows. Typical Applications ELISA DNA/RNA/Protein quantification Enzyme kinetics Ksdoxhfzyepfx Ahgsnb Cell viability and cytotoxicity (M2e preferred) FRET and TR-FRET Luminescence assays (M2e) Low-volume or cuvette-based protocols

Condition: good (used), Year of construction: 2019, operating hours: 11,778 h, load capacity: 1,400 kg, lifting height: 4,716 mm, fuel type: electric, mast type: triplex, construction height: 2,065 mm, empty load weight: 1,600 kg, mileage: 11,778 km, Electric triple mast stacker Brand: Still (Germany) Year of manufacture: 2019 Capacity: 1,400 kg Lifting height: 4,716 mm Mast height when lowered: 2,315 mm Features: FREELIFT 11,778 hours on the meter Battery: LI-ION Ksdpfxszxug To Ahgsnb Maintenance-free with charger Automatic filling system Watch the video on YouTube.

Condition: used, Pre-feeder Vacuum feeder N. 3 colors Automatic Slotter (minimi 88mm x150mm) Rotary die Cutter Stripper section Kodpfx Aez Atqxshgonb Stacker unit

Condition: good (used), Year of construction: 2020, operating hours: 239 h, load capacity: 1,200 kg, lifting height: 3,824 mm, fuel type: electric, mast type: duplex, construction height: 2,465 mm, empty load weight: 880 kg, mileage: 239 km, Electric stacker Brand: Still (Germany) Year of manufacture: 2020 Knjdpfjzqhn Uox Ahgeb Load capacity: 1,200 kg Lifting height: 3,824 mm Mast lowered height: 2,465 mm Hours: 239 Battery: 2020 Automatic filling system Equipped with an external charger.

Condition: used, Year of construction: 2007, The Horizon StitchLiner 5500, manufactured by Horizon in 2007, is a machine with a format of 350 x 500 mm currently in production and located in Germany. This machine includes two VAC-100a and VAC-100m collating towers, an ST-40 stacker, an ACF-30 accumulator and folder, an SPF-30 saddle stitcher, an HTS-30 three-knife trimmer, and a TB-30 transport belt. Key features include 20 stations, a U-shaped layout for efficient space utilization and easy monitoring, inline production from collating to the finished product, and variable data processing for personalized printing. It offers fully automatic format adjustment for quick job changes and a touchscreen for user-friendly operation, even for less experienced operators. The specifications include handling sheet sizes from a maximum of 500 x 350 mm to a minimum of 148 x 120 mm, with a paper weight range of 40-350 gsm. It can process thicknesses from 8 to 200 pages, with a maximum spine thickness of 5 mm, and achieves a production speed of up to 5,500 booklets per hour. Technical details include a trimming size (untrimmed) from a maximum of 350 x 250 mm to a minimum of 140 x 103 mm, and a trimming size (trimmed) from a maximum of 312 x 230 mm to a minimum of 120 x 95 mm. The machine requires a power supply of 400V/50Hz. The delivery terms are FCA. Format: 350 x 500 mm Equipment: This StitchLiner 5500 includes the following components 2x VAC-100a and VAC-100m Collating Towers ST-40 Stacker ACF-30 Accumulator and Folder SPF-30 Saddle Stitcher HTS-30 Three-Knife Trimmer TB-30 Transport Belt Key Features:- 20 stations- U-shaped layout: Efficient space utilization and easy monitoring- Inline production from collating to finished product- Variable data processing: Handles personalized p printing- Fully automatic format adjustment for quick job changes- Touchscreen for user-friendly operation, even for less experienced operators Specifications:- Sheet sizes: Max. 500 x 350 mm, Min. 148 x 120 mm- Paper weight: 40-350 gsm- Processing thickness: 8-200 pages (max. 5 mm spine thickness)- Production speed: Up to 5,500 booklets/ Kedpfx Ajvfx Ncehgenb Technical Details:- Trimming (untrimmed): Max. 350 x 250 mm, Min. 140 x 103 mm- Trimming (trimmed): Max. 312 x 230 mm, Min. 120 x 95 mm- Power supply: 400V / 50Hz- Space requirement: Min. 5,709 x

Condition: good (used), Year of construction: 2020, operating hours: 1,329 h, load capacity: 1,400 kg, lifting height: 5,016 mm, fuel type: electric, mast type: triplex, construction height: 2,165 mm, empty load weight: 1,600 kg, mileage: 1,329 km, Electric triple-mast stacker Brand: Still (Germany) Year of manufacture: 2020 Only 1,329 operating hours Capacity: 1,400 kg Lifting height: 5,016 mm Mast lowered height: 2,165 mm Equipped with: FREELIFT Battery: 2022, with charger Knsdpfx Ajzxh U Rshgsb Automatic filling system Watch the video on YouTube.

Condition: excellent (used), Year of construction: 2016, operating hours: 6,500 h, functionality: fully functional, 12 Gathering Stations Müller Martini 3692 Tensioning/Handfeeding unit 3692 ASAC Automatic Caliper Control 3715 Reject Delivery Automatic Signature Recognition Cameras: ASIR 3 12 clamps Muller Martini 1577 Pantera Touchscreen control with automatic set-up Hotmelt spine & Side gluing unit with premelter Hotmelt side glue with premelter PUR Nozzle Spine Gluing Unit Curved conveyor system 90 Muller Martini 3520 Conveyor belt Muller Martini 3520 Kjdpfx Ahoyufk Ajgsnb Conveyor belt with escape gate 3520 Müller Martini Granit 3 Knife Trimmer 3676 Müller Martini UNO Stacker 1534

Condition: good (used), IML DA 900 Rigid Box Automatic Wrapping Machine This machine is practically new. Year of manufacture: 2016. Application: Wrapping veneer on a box. Made in Italy. Ksdozw Ty Nopfx Ahgonb This automated machine is designed for forming solid board boxes by wrapping veneer on a solid board box. This is the latest version of the machine, with a PLC controller. Technical specifications: Max size: 430mm x 350mm x 120mm Min size: 60mm x 60mm x 10mm Version thickness: 100-175gsm Weight: 900kg Power supply: 230V The set includes two tool palettes for producing standard boxes. The molds are primarily made using 3D printing technology.

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 1,537 h, load capacity: 2,000 kg, lifting height: 2,100 mm, fuel type: electric, mast type: simplex, construction height: 1,548 mm, fork length: 1,190 mm, drive type: Elektro, Double-deck stacker Mast type: Standard Transmission: Automatic Condition: Refurbished without warranty Technical condition: Very good Front tyres type: Polyurethane Rear tyres type: Polyurethane Kodjxvfv Tepfx Ahgsnb Battery voltage: 24V Battery year: 2023 Description: Price includes new UVV inspection. The unit is being sold on behalf of a customer. The customer purchased the unit factory-refurbished and used it for only 7 hours. We are happy to organise cost-effective transport for you. Initial lift, CE certificate.

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: 1604/1999, total width: 2,500 mm, total height: 2,660 mm, total length: 21,500 mm, compressed air connection: 6 bar, type of input current: three-phase, overall weight: 3,500 kg, working width: 2,000 mm, working height: 1,000 mm, power: 14 kW (19.03 HP), table width: 1,310 mm, table length: 4,500 mm, Cape CP110 1 and CP110 2 - automatic hydraulic pallet nailing machine designed for top-side and bottom-side nailing. Machine allows for 2-way and 4-way pallet production. Stacker and Outfeed included. No listed price - open to offers. Kjdpfx Ajy S Trwohgonb

Year of construction: 1995, condition: used, Prefeeder Automatic Fossaluzza complete with shuttle and loading roller conveyor Knodpezd Dymefx Ahgob Martin vacuum feeder + belts N 3 bottom printing units vacuum + belts Die-cutting unit Vacuum stacker with bundle output 1 Tenace braker, year 2011 Martin ball turntable 1 Martin braker Bundle flip flop Palletizer Martin with sheet interlayer sheet feeder and pallet inserter

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, laser power: 3,200 W, sheet thickness (max.): 8 mm, working length: 3,000 mm, working width: 1,500 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Knsdpfxjzyay Ij Ahgsb Combined punching/laser operation: 3,000 mm × 1,500 mm Punching operation: 3,000 mm × 1,500 mm Laser operation: 3,000 mm × 1,500 mm Working area without repositioning: Large format Sheet metal thickness, structural steel max.: 8 mm Sheet metal thickness, stainless steel max.: 8 mm Sheet metal thickness, aluminum max.: 4 mm Maximum punching force: 220 kN Maximum punching speed (at 1 mm stroke): 900 strokes/min Maximum marking speed: approx. 2,800 strokes/min Maximum axis speed: 108 m/min Axis speed: simultaneous in X and Y axes Tool magazine: Linear magazine with multi-tools Maximum number of multi-tools: 18 Clamps: 3 Tool positions: 180 MACHINE DETAILS Laser source: Trumpf TruFlow 3200 CO₂ laser Laser power: 3,200 W Operating hours (as shown in the photo) Beam on hours: 12,716 h Laser on hours: 73,705 h EQUIPMENT SheetMaster with two large-format tables Automatic scrap sheet disposal onto lifting table

Year of construction: 2003, condition: excellent (used), For sale: KURTZ cutting line mod.VBR-S3 (Complete set: cutting KURTZ mod. VBR-S3, KUKA selection robot, packaging VIRO mod. PPZA-1300/24/MZG, palletizing, wrapping) EPS block cutting line with maximum dimensions of 5000x1200x1200. A block option of 600x1200x2400 is also available Knjdpjuct Upofx Ahgsb Complete line in "U" arrangement, consisting of: - Block buffer loading by dump truck - Horizontal cutting with automatic wire positioning, with double-frame cutting and oscillation - Polystyrene waste/scrap removal system: top, bottom, sides - Side cutter with manual wire positioning - Down cutter with automatic wire positioning - Anthropomorphic robot for product selection - VIRO packaging machine - Rotation of packages for cross stacking - It is possible to palletize different size polystyrene boards on wooden pallets or on glued polystyrene strips under the column with stacked polystyrene packages - Automatic stacker/palletizer for creating columns up to 3 meters high and up to 3 meters long - Vertical wrapping machine for automatic stretching of columns of polystyrene packages - Complete with inkjet printers and automatic labelers - Siemens S7 PLC controller - Complete with safety barriers with switch type protection - High-capacity line, in very good condition, requires an area of about 600 m2 (40m x 15m) - Year of manufacture: 2003 - Electricity requirements: 400V; 50 Hz; 115 kW; 300A

Year of construction: 2004, condition: good (used), Three knife trimmer automatic with integrated pre stacker Built in 2004 Size: max 384 x 340 mm min 140 x 103 mm Size trimmed: max 304 x 310 mm min 136 x 100 mm Book thickness: max 70 mm min 2 mm Speed: max 1.000-7.000 c/h Power requirement: kW 14 kW Compressed air: 40 Nm³/h bei 6 bar Width: 3.612 mm Depth: 2.950 mm Height: 2.030 mm Weight: 4.000 kg (approx.) Equipment equipment for changing the format: - 1 set of pressing plates & holders - 1 set of size extensions - 1 set of table quick change plates Knjdpfxef Iyb Ns Ahgeb - 3 sets of cutting sticks - 2 set of knives

Year of construction: 2008, condition: used, Dust jacketing machine Kolbus SU 631 Year: 2008 Description: - Inline production - Setup element: Solema stand-up unit - year 1999 - Infeed conveyor Knsdpfx Ahez Dgk Esgjb - Automatic jacket feeder - Scoring station - Book opening station - Case separation station - Case closing station - Delivery to the right Book stacker Theodor Attenberger Fancy Year: 2009 Description: - Compensating stacker - Turning device - Roller table delivery on the left and right

Condition: good (used), Year of construction: 2016, operating hours: 1,200 h, functionality: fully functional, machine/vehicle number: 90-0122-DDI-IR-INTE, input voltage: 415 V, total length: 3,000 mm, total width: 1,000 mm, total height: 1,000 mm, type of input current: three-phase, year of last overhaul: 2026, conveyor belt width: 800 mm, UV drying tunnel manufactured by Natgraph, designed for use with screen printing machines. The machine was manufactured in 2016 and is in very good technical condition. The tunnel is currently in production use and operates without issues. Main Features: - IR heating section - 2 UV lamps with precise and independent power control - Integrated cooling section to reduce the temperature of printed sheets after curing - Automatic stacker for collecting finished sheets in a neat stack - Possibility to connect with a screen printing machine - Lowering table, which provides easy operator access to the printing machine Working Process The tunnel is used for UV ink curing in the screen printing process. Printed sheets pass through the IR section and then through the UV curing section, where the ink is quickly and evenly cured by UV radiation. Knodpfx Aeyuztgehgob After curing, the sheets pass through the cooling section to reduce their temperature. Finished sheets are then automatically collected by the stacker. When connected to a printing machine, the tunnel can automatically adjust the UV lamp power to save energy. Machine Condition Year of manufacture: 2016 Technical condition: very good Machine currently in continuous production use Regularly maintained Included Equipment Natgraph UV dryer tunnel IR heating section 2 UV curing lamps Cooling section Automatic sheet stacker ✔ Machine ready for production ✔ Inspection possible during operation

Condition: good (used), Year of construction: 2017, operating hours: 971 h, load capacity: 1,600 kg, lifting height: 1,010 mm, fuel type: electric, mast type: duplex, construction height: 1,400 mm, empty load weight: 596 kg, mileage: 971 km, MULTIPLE UNITS IN STOCK. This DUO electric stacker from LINDE, year 2017, has a capacity of 1,600 kg as a pallet truck. Lifts 800 kg up to a height of 1,010 mm. The stacker features INITIAL LIFT, making it ideal for uneven floors. All functions operate perfectly. ONLY 971 hours on the clock. The stacker comes with a 2023 battery featuring an automatic filling system and an INTEGRATED charger. Delivery within three working days. Ready for immediate use and, if desired, supplied with inspection certificate. Video to follow. Ksdpfexz Ebtsx Ahgenb

Condition: good (used), Year of construction: 2011, operating hours: 498 h, load capacity: 1,000 kg, lifting height: 3,200 mm, fuel type: electric, mast type: duplex, construction height: 2,100 mm, empty load weight: 807 kg, mileage: 498 km, Electric stacker Brand: Jungheinrich Year of manufacture: 2011 Capacity: 1,000 kg Lifting height: 3,200 mm Mast height lowered: 2,100 mm ONLY 498 operating hours Battery from 2011 with INTERNAL charger automatic filling system Knedpfxozcnv Rj Ahgeb video to follow

Condition: used, Year of construction: 2018, operating hours: 104 h, load capacity: 800 kg, lifting height: 1,580 mm, fuel type: electric, gearing type: automatic, color: red, mileage: 104 km, first registration: 07/2018, suspension: other, driver cabin: other, emission class: none, fuel: electricity, For sale is a BT SWE 080L electric stacker with automatic transmission, first registered in 07/2018 and only 104 operating hours. This unit has seen very little use, is reliable, and ready for immediate operation – ideal for warehouses, production facilities, or company premises. The BT SWE 080L impresses with precise control and comfortable handling. The automatic transmission significantly facilitates operation, even in narrow aisles or when frequent picking up and setting down of loads is required. The BT SWE 080L electric stacker is the perfect solution for businesses seeking powerful, efficient, and low-maintenance warehouse technology. Whether for transport, storage and retrieval, or material handling – this machine supports you reliably and saves time with every task. Knodpfsxmlfpex Ahgob Sale to business customers only (agriculture, freelancers, small or large enterprises) or for export. Subject to prior sale and errors excepted.

Condition: used, Year of construction: 2004, Format: 310 x 430 mm Equipment: Kjdoy Tacxopfx Ahgjnb Counter 22 Mio Co-Pilot with Touchscreen Infeed conveyor from the right Automatic Magazine for In-line Production Counting Stacker Product Counter Tool Presetter Total number of knife sets: 1 Interchangeable Cutting Cassettes (Standard Set)

Condition: good (used), Year of construction: 2012, Built in 2012 Size max 330 x 250 mm Size trimmed max 330 x 250 mm min 200 x 148 mm Size trimmed without lap max 340 x 260 mm booklet thickness 4-6 mm Mechanical Speed max 22.000 t/h Equipment crane system • 2 Bundle clamps gathering chain & feeders • 8 stations gathering chain • 6 feeders 0416.0440 • 6 streamfeeders 3738 with extensions • 1 Card gluer 423 • 1 Semko • 3 ELTEX static devices stitching unit 410.0425 • 2 stitching heads three knife trimmer • three knife trimmer 304 knives • 2 sets of knives controls • automatic selfajusting calipers ASAC • signature reading system ASIR • automatic make ready system Amrys Pick up station with chain and delivery station Inserter Knjdpfx Ahetryhfsgsb • Müller Martini Integro • 4 stations • reject unit • transfer unit Addressing unit • Sitma 930-A Stacker • Müller Martini Robusto 451 Electrostatic Blocker • Müller Martini 457 Condition Very good working condition can been tested

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: P260713253, 𝘼𝙪𝙩𝙤𝙢𝙖𝙩𝙞𝙘 𝘿𝙤𝙪𝙗𝙡𝙚-𝙀𝙣𝙙 𝙋𝙧𝙤𝙛𝙞𝙡𝙞𝙣𝙜 𝙇𝙞𝙣𝙚 𝙛𝙤𝙧 𝙋𝙖𝙧𝙦𝙪𝙚𝙩 𝙁𝙡𝙤𝙤𝙧𝙞𝙣𝙜 1. 𝗚𝗲𝗻𝗲𝗿𝗮𝗹 𝗜𝗻𝗳𝗼𝗿𝗺𝗮𝘁𝗶𝗼𝗻 • HOMAG OPTIMAT FRP225/7/10PL/L – Longitudinal Profiling Machine • HOMAG OPTIMAT FRP226/5/5PL/Q – Cross Profiling Machine Automatic, high-speed double-end profiling line designed for the production of solid wood, engineered wood, and laminate flooring. The line performs precision machining on all four edges, including tongue-and-groove and click-locking profiles. 2. 𝗠𝗮𝘁𝗲𝗿𝗶𝗮𝗹𝘀 𝗣𝗿𝗼𝗰𝗲𝘀𝘀𝗲𝗱 • Solid hardwood flooring • Engineered wood flooring • Laminate flooring • Multi-layer parquet • Decorative flooring panels 3. 𝗠𝗮𝗶𝗻 𝗧𝗲𝗰𝗵𝗻𝗶𝗰𝗮𝗹 𝗦𝗽𝗲𝗰𝗶𝗳𝗶𝗰𝗮𝘁𝗶𝗼𝗻 Parameter Specification Machine Type Double-End Tenoner / Profiling Line Longitudinal Machine HOMAG FRP225 Cross Machine HOMAG FRP226 Maximum Feed Speed Up to 80 m/min Kjdpfozmrw Ssx Ahgsnb Working Principle Continuous automatic feed Number of Working Units 7 (FRP225) + 5 (FRP226) Total Working Units 12 Production Mode Continuous 4. 𝗪𝗼𝗿𝗸𝗽𝗶𝗲𝗰𝗲 𝗖𝗮𝗽𝗮𝗰𝗶𝘁𝘆 Parameter Typical Range Thickness 5–25 mm Width Customer-specific configuration Length Customer-specific configuration 5. 𝗠𝗮𝗰𝗵𝗶𝗻𝗶𝗻𝗴 𝗢𝗽𝗲𝗿𝗮𝘁𝗶𝗼𝗻𝘀 The line is capable of performing: • Longitudinal profiling • Cross-end profiling • Tongue machining • Groove machining • Click profile machining (depending on tooling) • Micro-bevel production • Relief grooves • Edge trimming • Sizing and calibration • Four-side profiling 6. 𝗠𝗮𝗰𝗵𝗶𝗻𝗲 𝗖𝗼𝗻𝗳𝗶𝗴𝘂𝗿𝗮𝘁𝗶𝗼𝗻 HOMAG FRP225 Function • Longitudinal edge profiling Configuration • Six machining units • High-frequency spindle motors • Precision side guides • Automatic pressure system • Heavy-duty chain conveyor HOMAG FRP226 Function • Cross-end profiling Configuration • Four machining units • Automatic synchronization with FRP225 • Precision positioning system • High-speed transfer conveyor 7. 𝗗𝗿𝗶𝘃𝗲 𝗦𝘆𝘀𝘁𝗲𝗺 • High-frequency spindle motors • Variable-speed feed drive • Precision chain transport system • Pneumatic pressure rollers • Servo-controlled positioning (depending on machine version) 8. 𝗧𝗼𝗼𝗹𝗶𝗻𝗴 • Leitz • Leuco • Kanefusa • AKE • Tigra Typical tooling: • Profile cutters • Grooving cutters • Chamfer cutters • Relief cutters • Diamond tooling (PCD) 9. 𝗠𝗮𝗰𝗵𝗶𝗻𝗲 𝗖𝗼𝗻𝘁𝗿𝗼𝗹 • Siemens PLC control system • Frequency-controlled spindle drives • Digital machine diagnostics • Electronic feed speed adjustment 10. 𝗣𝗿𝗼𝗱𝘂𝗰𝘁𝗶𝗼𝗻 𝗣𝗲𝗿𝗳𝗼𝗿𝗺𝗮𝗻𝗰𝗲 Parameter Typical Value Feed Speed Up to 80 m/min Production Capacity Approximately 1,500–4,000 m² per shift* 11. 𝗧𝘆𝗽𝗶𝗰𝗮𝗹 𝗣𝗿𝗼𝗱𝘂𝗰𝘁𝗶𝗼𝗻 𝗟𝗶𝗻𝗲 𝗟𝗮𝘆𝗼𝘂𝘁 1. Automatic infeed system 2. HOMAG FRP225 longitudinal profiler 3. Automatic transfer section 4. HOMAG FRP226 cross profiler 5. Inspection station 6. Automatic stacker 12. 𝗠𝗮𝗶𝗻 𝗔𝗱𝘃𝗮𝗻𝘁𝗮𝗴𝗲𝘀 • High dimensional accuracy • Excellent profile repeatability • High production speed • Fast tooling changeover • Continuous automatic operation • Suitable for traditional tongue-and-groove and modern click systems • Reliable industrial design for high-volume production 𝗧𝘆𝗽𝗶𝗰𝗮𝗹 𝗔𝗽𝗽𝗹𝗶𝗰𝗮𝘁𝗶𝗼𝗻𝘀 • Solid parquet flooring • Engineered flooring • Laminate flooring • Luxury wood flooring • High-precision click flooring systems