Used Atlas Copco Pump for sale (371)

Condition: used, Year of construction: 2019, operating hours: 12,100 h, functionality: fully functional, machine/vehicle number: 010460, We are offering a high-performance industrial compressor from Atlas Copco for sale. The unit is used, has been regularly maintained by qualified personnel, and is immediately ready for operation. Technical specifications: Type: GA37 VSD+ FF (VSD+ technology for maximum energy efficiency) Operating hours: 12,100 hours Fpjdpfjzdqz Dox Ak Usl Condition: Used, very well maintained, and immediately ready for operation. The compressor can be inspected and tested on-site in Kiel after prior arrangement.

Condition: used, Year of construction: 2020, operating hours: 5,945 h,

Condition: good (used), For sale: a mobile Atlas Copco XAS 60 screw compressor with a Deutz F2L 511 diesel engine. The unit has only 613 operating hours since new. The engine is in very good condition – it starts easily and runs properly. The compressor was imported from Germany. It has not been used for about fifteen years, and the compressor's screw element has seized. We attempted to repair it, and the unit was reassembled, but it currently only generates a pressure of approximately 4 bar. For this reason, it is being sold as damaged, for further repair. It may be an interesting proposition for someone who will undertake the repair of the compressor, or as a source of parts, especially the well-maintained Deutz F2L 511 engine. Engine data: * Manufacturer: Deutz * Type: F2L 511 * Power: 25 kW / 34 HP * Speed: 2800 rpm * Operating hours: 613 hours Fpsdjzv Ei Hspfx Ak Ujl * Engine is functional, starts and runs properly The visual condition is appropriate for the age of the unit – visible signs of use, storage, and localized corrosion.

Condition: used, Year of construction: 2022, ---- Data: Frame: Stationary Light type: LED Dimensions (L x W x H): 500 mm x 500 mm x 2200 mm Weight: 45 kg Mast type: Manual, vertical Maximum height: 3.5 m Power: 1 x 320 W Wind resistance: 50 km/h Fjdezkzc Sjpfx Ak Uopl Mains frequency: 50 Hz

Condition: like new (used), Year of construction: 2017, operating hours: 56 h, functionality: fully functional, total length: 1,976 mm, total width: 974 mm, total height: 1,500 mm, pressure (max.): 13 bar, noise level: 70 dB, nominal flow rate: 240 m³/h, The machine is in like-new condition with only 54 operating hours! Submitting a bid obligates the buyer to collect the machine on the following dates: Monday, October 5, 2026, Tuesday, October 6, 2026, Wednesday, October 7, 2026, Thursday, October 8, 2026, until 12:00 PM. The machine is already in storage. The technical data specified in the advertisement comes from a manufacturer's data sheet. The seller does not guarantee the accuracy of the data. TECHNICAL DETAILS Operating pressure max.: 13 bar Pressure setting range: 4–13 bar Fedpfx Aszzmw Nok Uopl Volume flow: 22–66 l/s Volume flow: 1.3–4.0 m³/min Volume flow: 47–140 cfm Sound pressure level: 70 dB(A) MACHINE DETAILS Motor power: 22 kW Dimensions (L x W x H): 1,976 x 974 x 1,500 mm EQUIPMENT Elektronikon Graphic control system Oil-free, water-injected screw compressor ISO 8573-1 Class 0 VSD speed control Further technical data can be found in the attached data sheet.

Condition: good (used), Atlas Copco GHS 350 VSD vacuum pump from 2017. The VSD technology (Variable Speed Drive) ensures optimal performance and significant energy savings. The pump is in excellent condition with 12,558 operating hours. Fedsy Ahrmspfx Ak Uspl

Condition: excellent (used), Year of construction: 2019, operating hours: 8,000 h, functionality: fully functional, power: 55 kW (74.78 HP), volume flow: 9.7 m³/h, operating pressure: 8 bar, pressure (min.): 4.5 bar, pressure (max.): 8.5 bar, type of cooling: air, Equipment: documentation/manual, type plate available, Fully functional Atlas Copco screw compressor, model GA 55, in new condition. Fpodpfx Akszzq Ewo Usl

Condition: used, Year of construction: 2018, operating hours: 3,450 h, functionality: fully functional, overall weight: 23,000 kg, For sale: Plug & Play nitrogen generation system Nitrogen generator Manufacturer: AtlasCopco / AirCo Type: PSAL58SN Year of manufacture: 2018 Serial number: 2018-21968 Weight: approx. 24 tons (estimated) Temperature min./max.: +3°C / +45°C Maximum pressure: 300 bar Operating voltage: 400 volts Installed in a 40" container, insulated with intake/exhaust air vents, Winter/summer mode Activated carbon filter type AK300 Pre-/post-filter type AF267UHU Nordpol cut system type 100PlusPan 2 x high-pressure compressors, each with a capacity of 15 kW 2 x nitrogen tanks, capacity 500L / 1,000 liters each Absorption dryer type A-DRY-105 2 x filter type AF85H Fpjdsxvtl Nopfx Ak Uol 6 x nitrogen bundles, 300 bar 56 cubic meters per hour continuous production capacity Purity: 99.9% (depending on production capacity) Power consumption: 125 amps Transportation can be arranged upon request. If you are interested or have any questions, please send me a message. More photos and technical details available upon request. All information is provided without guarantee. Errors and prior sale are reserved. Price: Net export price. For further questions, please call. Nous parlons Français / Мы говорим по-русски We speak English / Noi vorbim românește Viber / WhatsApp / Skype For an additional charge, we will handle all customs and registration matters. For an additional charge, we will transport the vehicles to the port.

Condition: used, Atlas Copco GA 118 Rotary screw compressor Fpodpfx Aezz Rm Uek Usl

Condition: repair required (used), Year of construction: 2010, operating hours: 64,380 h, functionality: unexamined, Screw compressor Atlas Copco GA132VSDW Inverter integrated 132 kW 8.10 bar Fjdozznqkepfx Ak Uepl 26.04 m3/min Year of manufacture: 2010 Operating hours: 64,380 h

Year of construction: 2017, condition: used, Air dryer Weight 128 kg Compressed air pressure 13 max Ambient temperature max 46°C Fedpew Da Enofx Ak Uepl

Condition: good (used), functionality: fully functional, overall weight: 1,150 kg, Year of construction: 2010, Compressor/Atlas Copco GA45P compressor Maximum allowable working pressure (MAWP) 7.8 bar/113psi Capacity 133.7 l/s 183.3CFM 8.02m³/min Voltage 400V 50Hz Power 45kW/60HP 2985 pbr/min Fodpev Ey Tijfx Ak Uspl Weight 1150kg Year of manufacture 2010 Dimensions 2000x1000x1800mm

Condition: used, Year of construction: 2008, operating hours: 85,394 h, functionality: fully functional, machine/vehicle number: APF 136194, overall weight: 2,550 kg, total length: 2,900 mm, total width: 1,450 mm, total height: 2,200 mm, space requirement length: 3,000 mm, space requirement width: 1,600 mm, motor manufacturer: ABB, fuel type: electric, ATLAS COPCO ZT 55 VSD Screw Compressor with Inverter, 18.5 kW, 3.35 m3/min, 13 bar Our company offers a professional level of service and high-quality products, all of which have been “tested” in the market, guaranteeing a successful partnership with you. We offer a warranty on used compressors and dryers! Our strength is our 24/7 compressor service. ATLAS COPCO GA18VSD Screw Compressor with Inverter, 18.5 kW, 3.35 m3/min, 13 bar Fedsy Amh Hopfx Ak Uopl Technically sound and ready for operation. I also have a dryer with a filter set. A preferential price is offered for the combined purchase.

Condition: excellent (used), functionality: fully functional, overall weight: 1,570 kg, Year of construction: 2019, Two pieces available Machine type: internal combustion engine-driven pump Machine brand: ATLAS COPCO Designation: WEL PST 100 CNP Year of manufacture: 2019 Own weight (kg): 1570 Engine type: Hatz 2G40 /compression ignition/ Engine power (kW): 9.8 Engine capacity (cm3): 997 Fuel type: diesel Maximum capacity – 100m3/h. Pumping height – 20 m. Suction pipe diameter – 100mm. Pumping pipe diameter – 100mm. The Atlas Copco WEL PST piston pump is a high-performance device suitable for difficult tasks requiring 24-hour operation, designed to save fuel. Fpsdpfx Aevz Drhek Uol

Condition: ready for operation (used), Year of construction: 2007, operating hours: 933 h, functionality: fully functional, power: 83 kW (112.85 HP), fuel type: diesel, volume flow: 11.5 m³/h, pressure (min.): 7.5 bar, pressure (max.): 7.5 bar, axle configuration: 1 axle, Fully functional screw compressor, Atlas Copco XAS186 DD, Deutz engine. Fedpfozy Ad Ajx Ak Ujpl Dutch registration. 11.5 m³ maximum, 8 bar. 933 operating hours.

Condition: excellent (used), Year of construction: 2016, Atlas Copco SF8 + FF Oil Free Air Compressor Fodpfev D Hayox Ak Uspl This is a Used Atlas Copco SF8+FF Oil Free Scroll Air Compressor manufactured in 2016. SF+ 8 multi-scroll units bring in the benefits and flexibility of a modular system utilizing two to four compressor modules integrated into one canopy. The Elektronikon® continuously monitors the status of each element and starts and stops the compression elements, thereby ensuring that the compressed air output matches the air demand. Moreover, the perfect air quality and user-friendliness of these units guarantee a superior production process. Manufacturer: Atlas Copco Model: SF8 + FF HC Year: 2016 Capacity: 0,68m3/h Installed Power: 7,4 kW Noise Level: 63 dB Max. working pressure: 9,75 bar Machine Dimensions LxWxH: 1.700x760x1.850 mm Machine Weight: 457 kg.

Condition: good (used), Year of construction: 2001, functionality: fully functional, power: 305 kW (414.68 HP), Description: Screw compressor with drum dryer ZR315VSD Characteristics: Capacity 8.60 bar Power 305 kW Voltage 500 V Running hours at last maintenance: 46383 Fpsdpfxevyq Tpe Ak Uel

Condition: repair required (used), Year of construction: 2007, functionality: not functional, Screw compressor Atlas Copco GA250FF Fodpozhu Naefx Ak Uepl Dryer integrated 250 kW 9.75 bar 37.80 m3/min Year of manufacture: 2007 Main motor defective Price: 9,000 EUR

Year of construction: 2015, condition: used, functionality: fully functional, machine/vehicle number: BES041875, Thanks to its high impact frequency and reduced impact energy, it is primarily/ideally suited for use in track tamping or maintenance work. For driving rail spikes in wooden sleepers, driving pipes, posts, probes, and breaking concrete. Easy transport, short setup time, low emissions, low noise levels. HAPS (Hand and Arm Protection System). Fedpfex Eb Udsx Ak Uepl

Condition: good (used), Year of construction: 1995, Screw compressor Manufacturer: Atlas Copco Type: XRHS 385 Year of manufacture: 1995 Operating hours: approx. 12,865 h Fodsvi Hplopfx Ak Ujpl Delivery pressure: 20 bar Output: 224 kW Engine: OM441LA Weight: 5.8 tons

Condition: ready for operation (used), Year of construction: 2023, operating hours: 2,222 h, functionality: fully functional, machine/vehicle number: ya3064249n0867271, overall weight: 2,450 kg, fuel type: diesel, operating pressure: 14 bar, Equipment: type plate available, For sale is a powerful, mobile screw compressor, an Atlas Copco XAS 188-14 PACE S5. The machine is in good used condition and only shows the usual signs of wear and tear from use. The compressor is ideal for professional applications in sandblasting, abrasive blasting, construction, renovation, industry, and the operation of high-performance pneumatic tools. Thanks to the PACE technology, the required working pressure can be flexibly adjusted to suit the specific application. Fjdpfx Aezzp N Iek Uepl Technical data: Manufacturer: Atlas Copco Model: XAS 188-14 PACE S5 Operating hours: approx. 2,222 h Fuel: Diesel Engine: John Deere, 4-cylinder Engine power: 104 kW / approx. 141 hp Working pressure: 5–14 bar Air flow rate: up to approx. 10.9 m³/min Emission stage: Stage V Control system: Atlas Copco PACE Sound power level: 99 dB(A) Design: mobile compressor on a single-axle chassis Braked chassis with drawbar Emergency stop and electronic control system are available The compressor can be inspected and test-run by appointment.

Condition: excellent (used), Year of construction: 2020, S017015 PROD. ATLAS COPCO TYPE GA45 S/N API588534 YEAR 2020 POWER (kW) 45 CAPACITY (m3/min) 8.3 PRESSURE (bar) 7.5 HOURS (RUNNING/TOTAL) FREQUENCY CONVERTER no BUILT-IN DRYER no EXCHANGER no COOLED BY (AIR/WATER) air Fedpezz Nndofx Ak Uopl ON TANK no CONNECTION 2' DOCUMENTS no

Condition: excellent (used), Year of construction: 2008, ATLAS COPCO GA90VSDFF screw compressor, equipped with a frequency converter and air dryer, recently serviced. Fpsdpfx Aszzbyfek Ujl Technical data: capacity: 17.070 m3/min; 90 kW motor; maximum pressure: 12.8 bar; operating hours: 13435 h; year: 2008. Price: 48,500 net Price: 59,655 gross The compressor is in full working order, ready for operation, and comes with a warranty. We also provide service support.

Condition: excellent (used), I am offering a used Atlas Copco Cobra PRO petrol-powered hammer. The unit is from 2014 and was manufactured in Sweden. The Cobra PRO model is a professional petrol-powered hammer designed for construction, roadwork, and demolition applications – it does not require electrical power or a compressor, making it ideal for outdoor use. The visual condition is as shown in the pictures – with normal signs of use, scratches, and scuffs. It is equipped with a working chisel. Specifications: Fpsdpfxjzkwdlj Ak Uel Manufacturer: Atlas Copco Model: Cobra PRO Year of manufacture: 2014 Country of manufacture: Sweden Engine: 2-stroke petrol engine Application: concrete and asphalt breaking, roadwork, and earthmoving Mobile design – does not require a compressor or mains power.

Condition: excellent (used), Year of construction: 2016, operating hours: 3,611 h, PROD. ATLAS COPCO TYPE GA90 S/N API624230 YEAR 2016 POWER (kW) 90 CAPACITY (m3/min) 16.48 Fpodpfxozxxnbj Ak Uel PRESSURE (bar) 8.5 HOURS (RUNNING/TOTAL) 3611 VARIABLE FREQUENCY DRIVE no BUILT-IN DRYER no HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTION 2 1/2 NEW/USED USED