Used Atlas Ar 80 for sale (465)

Condition: like new (used), Year of construction: 2019, operating hours: 36,285 h, functionality: fully functional, Premium second-hand Atlas Copco GA315VSD: 315 kW with 8.5 bar and 58.50 m3/min. Year of manufacture 2019 with only 36,285 operating hours. Excellent condition. Lrsdeuzfv Eepfx Afaek

Condition: used, functionality: fully functional, power: 250 kW (339.91 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 390 l, operation weight: 39,000 kg, maximum load weight: 14,000 kg, tire condition: 100 %, emission class: euro3, shovel volume: 6.4 m³, digging bucket width: 2,800 mm, Year of construction: 2013, Front axle load: 19,115 kg Cab: ROPS/FOPS-certified Fuel tank capacity: 390 liters Brake: SAHR (spring-applied, hydraulically released) multi-disc wet brakes on each wheel Turning circle (outer): 7.508 m Transmission: Dana Series T40000, 4-speed powershift transmission with torque converter Turning circle (inner): 4.015 m Maximum speed: 26.9 km/h (in 4th gear) Rear axle load: 18,885 kg Maximum torque (at 1,350 rpm): 1,674 Nm Weight: approx. 39,000 kg Output (at 2,100 rpm): 250 kW / 355 HP Engine manufacturer: Cummins QSM11 EPA Tier 3/EU Stage IIIA Bucket capacity (heaped): 6.4 m³ Lsdpfxexpww Ae Afajrk Breakout force (mechanical): 18,420 kg Breakout force (hydraulic): 22,300 kg Payload capacity: 14,000 kg

Condition: refurbished (used), Year of construction: 2006, power: 90 kW (122.37 HP), fuel type: electric, type of cooling: air, We offer this refurbished Atlas Copco GA90 rotary screw compressor, year 2006. The compressor was imported from Europe and has not been operated in Ukraine. Comprehensive repairs have been carried out, including replacement of the screw block bearings and gearbox (multiplier) bearings, shaft seal replacement and bushing, replacement of the flexible coupling for torque transmission, replacement of the electric motor bearings, as well as replacement of all filters and oil. A new inlet valve with a new solenoid valve has been fitted. The thermostatic valve has been overhauled with a new repair kit, as well as the minimum pressure valve, oil-stop valve, check valve with repair kits replaced, and the condensation drain valve has also been serviced. A new Elektronikon compressor control unit has been installed. The hydraulic hoses have been replaced and the oil system has been cleaned. Delivery across Europe can be arranged. Lrsdpfxoyxy Das Afaek

Condition: excellent (used), Year of construction: 2004, operating hours: 59,690 h, functionality: fully functional, Screw compressor Atlas Copco ZR90VSDFF Inverter and dryer integrated. 90 kW 8.75 bar 14.70 m³/min Ljdpfeyuvwaox Afaerk

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, overall weight: 1,654 kg, Equipment: refrigerant dryer, type plate available, Atlas Copco air compressor, model: GA90VSDFF, oil-injected screw compressor with frequency converter (VSD), with dryer, pressure: 12.7 bar, air flow: 293.1 L/s, motor: 3508 rpm, year: 2016, weight: 1654 kg. Shipping throughout Europe not included, VAT not included. Reference: 1167 Lrjdoyxpz Uspfx Afask

Condition: used, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). JAB Hydraulic Breaker / Hammer / MS03 / in stock & immediately available Price: €3,690.00 net / €4,391.10 gross - Weight (kg): 336 - Length with chisel (mm): 1,500 - Chisel diameter (mm): 70 Equipment: - incl. MS03 adapter plate Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. We have a very large selection of various attachments in our warehouse, all immediately available! Mr. Herden (phone) will be happy to assist you. Upon request, we will gladly provide you with a financing offer. We are an official Magni telehandler sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. Lrsdpsyxadmofx Afajk Errors and prior sale excepted! Internal No.: JW10GC = More information = Intended use: Construction Unladen weight: 336 kg Please contact Marius Herden for further information.

Condition: used, Year of construction: 1990, operating hours: 50,000 h, functionality: unexamined, operating pressure: 10 bar, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, We are offering this used Atlas Copco GA 75 screw compressor, year of manufacture 1990. Manufacturer: Atlas Copco Lsdpeywyc Hofx Afajrk Model: GA 75 Year: 1990 Including dryer, oiler, and 2000L buffer tank. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), functionality: fully functional, operation weight: 7,000 kg, Year of construction: 2008, machine/vehicle number: CRG- 442812008-l, in excellent condition Ljdpfeylml Nex Afaork

Condition: ready for operation (used), Year of construction: 2013, operating hours: 42,000 h, functionality: fully functional, overall weight: 3,315 kg, total length: 3,200 mm, total width: 1,630 mm, total height: 1,960 mm, motor manufacturer: Siemens, power: 236 kW (320.87 HP), volume flow: 3,013 m³/h, operating pressure: 4 bar, noise level: 77 dB, type of cooling: water, Equipment: documentation/manual, type plate available, 1 unit Low-Pressure Screw Compressor Manufacturer: Atlas Copco Model: ZE 4 VSD Year of manufacture: 2013 Volume flow: 3,013 m³/h (50.2 m³/min) Operating pressure: 4 bar Operating hours: approx. 42,000 hours Shaft power: 225 kW Drive power: 236 kW Discharge temperature with aftercooler: 40°C Discharge temperature without aftercooler: 244°C Compressor speed: 3,630 rpm Speed control: with integrated frequency converter Cooling: Water-cooled with stainless steel shell-and-tube heat exchanger FUNKE 1.4571 Electric motor: Siemens 1LG6 316-4ZZ91-Z Dimensions Length: 3,200 mm Width: 1,630 mm Height: 1,960 mm Weight: 3,315 kg Also available: Cyclone Afterseparator Manufacturer: BZ Zyklone Model: 175 (stainless steel) Condensate drain Bekomat Shell-and-Tube Heat Exchanger Manufacturer: Funke Model: A100 805-6-1Pass Material: Stainless steel 2x Rubber Expansion Joints 1x Intermediate Flap Valve DN 150 with Auma Actuator SG 05.1 F07 1x Cooling Water Control Valve Samson 3274 DN 50 PN 16 Ledoywr Tkjpfx Afajrk 1x Steel Pipe DN 150 with 2x 90° bends

Condition: ready for operation (used), operating hours: 20,000 h, functionality: fully functional, 1.46–7.25 m³/min, recently measured. Lrodjyg H Tcepfx Afaek

Condition: excellent (used), Year of construction: 2008, operating hours: 64,878 h, functionality: fully functional, Screw compressor GA22VSDFF 22 kW Integrated inverter and dryer. Ledoyr Da Rjpfx Afaork 13 bar 3.85 m3/min

Condition: excellent (used), Year of construction: 2011, operating hours: 50,496 h, functionality: fully functional, Screw Compressor Atlas Copco GA11VSDFF 11 kW 13 bar With integrated inverter and dryer. 1.84 m³/min. Lodpfsyr Dakox Afaerk

Condition: excellent (used), Year of construction: 2018, operating hours: 50,708 h, functionality: fully functional, Compressed air dryer Atlas Copco FD1750+ 14 bar 105 m3/min Lsdpfx Ajyr A Uyefaerk

Condition: used, Year of construction: 1998, operating hours: 80,000 h, functionality: fully functional, overall weight: 6,550 kg, total length: 3,700 mm, total width: 2,120 mm, total height: 2,400 mm, motor manufacturer: Siemens, power: 315 kW (428.28 HP), volume flow: 46 m³/h, operating pressure: 10 bar, noise level: 72 dB, type of cooling: water, Equipment: documentation/manual, type plate available, 2 screw compressors with special voltage of 6000 Volts Manufacturer: Atlas Copco Model: ZR 315-10-50/E Operating pressure: 10 bar Volume flow: 46 m³/min Year of manufacture: 1998 Operating hours: approx. 80,000 hours Cooling: water-cooled Ledpfjywcr Rsx Afasrk Motor manufacturer: Siemens Power: 315 kW Speed: 1482 rpm !!! Voltage: 6000 Volts !!! Dimensions: Length: 3700 mm Width: 2120 mm Height: 2400 mm Weight: 6550 kg

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: ITJ214134, overall weight: 198 kg, power: 5.5 kW (7.48 HP), operating pressure: 10 bar, pressure (max.): 10 bar, ambient temperature (max.): 40 °C, type of cooling: air, Equipment: documentation/manual, type plate available, We offer this used Atlas Copco GX5FF EP piston compressor, year of manufacture 2018. Model: GX5FF EP Year of manufacture: 2018 Weight: 198 kg Dryer voltage: 230 V Dryer frequency: 50 Hz Dryer power: 0.24 kW Dryer phases: 1 Ph Compressor voltage: 400 V Compressor frequency: 50 Hz Compressor power: 5.5 kW Compressor phases: 3 Ph Operating pressure: 10 bar Maximum pressure: 10 bar Max. inlet temperature: 40°C Max. ambient temperature: 40°C Refrigerant type: R134A Refrigerant quantity: 0.17 kg Ledpfx Afoyvzvfjajrk CO₂ equivalent: 243 kg Product number: 8152101195 Serial number: ITJ214134 If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: excellent (used), Year of construction: 2021, operating hours: 2,380 h, functionality: fully functional, overall weight: 268 kg, total length: 1,100 mm, total width: 650 mm, total height: 1,450 mm, power: 5.5 kW (7.48 HP), pressure (max.): 12.75 bar, Equipment: refrigerant dryer, type plate available, Atlas Copco GA5 VSD + FF oil-injected screw compressor with approx. 5 kW output, max. 12.75 bar pressure and approx. 1.1 m³ of compressed air per minute, including air dryer and separate 500-litre storage tank (pressure tank), manufactured by OKS, both built in 2021, and a condensate pump. The unit was used for only approx. 3.5 years in a bakery for simple pneumatic applications and for cleaning purposes, approx. 2,380 operating hours, 96% of which were in the 40–60% speed range; first commissioned: August 2021 (was only used regularly until around May 2024). Original price of the system excluding installation: approx. €12,000 net. Lsdpjyvtxxofx Afajrk This screw compressor is one of Atlas Copco’s most energy-efficient compressors, the first choice for low lifecycle costs. VSD (Variable Speed Drive) technology automatically regulates the motor speed based on actual compressed air demand, enabling energy savings of 35–60% on average compared to fixed-speed compressors, depending on the compressed air consumption profile. Very good condition, see also photos. Available immediately. Price: € 6,950 net ex-warehouse

Condition: used, Year of construction: 2006, operating hours: 4,750 h, Atlas articulated loader Atlas 75 S Year of manufacture: 2006 Operating hours: approx. 4,750 h Operating weight: 6,000 kg Unfortunately, the multi-purpose bucket has been welded We are always available for viewings. Ljdpfx Afjyvpvgeaerk

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Atlas Copco FX13 compressed air dryer, 10.02 m³/min Ljdpfxsyrdifs Afajrk

Condition: like new (used), Year of construction: 2016, operating hours: 3,890 h, functionality: fully functional, INVERTER COMPRESSOR WITH INTEGRATED DRYER, LIKE NEW, ONLY 3890 HOURS. NEW LIST PRICE: EUR 56,199. MAIN FEATURES: MAX PRESSURE 13 BAR, OUTPUT 5100 L/MIN, POWER 26KW-35HP. Lrjdpfexnx Dhex Afajk

Condition: new, Year of construction: 2025, atlas copco compressor (we are official dealers) with warranty. new and ready for delivery. super silent. possibility of combining external dryer (available). main features: Ledpfxsv Drq Ro Afasrk max bar 10 power 11kw / 15 hp air flow liters / min 1500 list price euro 10517

Condition: used, mileage: 11,920 km, power: 95 kW (129.16 HP), gearing type: other, fuel type: gasoline, color: yellow, overall weight: 23,000 kg, empty load weight: 21,816 kg, maximum load weight: 1,184 kg, number of seats: 1, first registration: 02/2013, emission class: none, suspension: other, Year of construction: 2013, operating hours: 11,920 h, total length: 7,700 mm, driver cabin: other, construction height: 4,000 mm, Equipment: air conditioning, parking heater, trailer coupling, The used Atlas 1604 K ZW KLIMA rail-road excavator is a versatile excavator, equipped with a quick coupler and a reliable Deutz engine. The excavator was built in 2013 and has 11,920 operating hours. The machine offers an engine power of 95 kW (129 hp) and a displacement of 4,038 cc. It has a spacious double cabin with a heated, air-suspended comfort seat and air conditioning. The vehicle is suitable for use on trams thanks to its narrow axles and special support. Other features include an Eberspächer fuel heater, a CWF600 soot particle filter and a rear view camera with monitor. The excavator has a heavy counterweight of 4.5 tons and a swing radius of 2,000 mm, which ensures greater stability and efficiency on the construction site. Lrsdsr Uzazjpfx Afaek The excavator is also equipped with a wagon braking system that can be controlled from the cabin, as well as an electronic stroke limiter for fine-tuning the lifting and working cylinders. The machine has various loading options and is offered with a comprehensive maintenance record (service booklet). Inspections are possible during the stated opening hours without prior appointment. Sale only to commercial customers (agriculture, freelancers, small and large businesses) or export. Errors and prior sale reserved.

Condition: excellent (used), Year of construction: 2012, operating hours: 84,199 h, functionality: fully functional, Screw compressor Atlas Copco GA55VSD. 55 kW, 13 bar, 10.30 m³/min. Integrated frequency converter. Lrjdsypl U Depfx Afaek

Condition: used, functionality: unexamined, For sale: Air Dryer Type FD 120 3x380/415V; 50Hz Serial no. 302210 Lredpfxjyutnpe Afajk Net price: EUR 1,100 negotiable.

Condition: excellent (used), Year of construction: 2018, overall weight: 403 kg, volume flow: 2.39 m³/h, operating pressure: 10 bar, input voltage: 400 V, ATLAS COPCO GA 15 Screw Compressor Lrsdpoyfw Sgofx Afaok Motor: 15 kW Output: 2.39 m3/min Pressure: 10 bar Year of manufacture: 2018 Operating hours: 8092 h

Year of construction: 2011, condition: not inspected (used), functionality: unexamined, overall weight: 500 kg, total length: 2,000 mm, total width: 1,000 mm, total height: 2,400 mm, pressure: 12.75 bar, machine/vehicle number: CAI709141, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates you to timely collection either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! Lrjdjym Rqfopfx Afask TECHNICAL DETAILS Compressed air max.: 12.75 bar MACHINE DETAILS Operating voltage: 230 V Frequency: 50 Hz Compressor voltage: 400 V Compressor frequency: 50 Hz Connected load: 3 kW Dimensions & Weight Dimensions (L x W x H): 2,000 x 1,000 x 2,400 mm Weight: 500 kg External reference: Pieper – Lot 55