Used Atlas Ar 55 for sale (442)

Condition: used, Year of construction: 2009, Overview  Nsdpfx Absxrc Acewowi This complete compressed air installation was manufactured between 2009 and 2013 by Atlas Copco (Sweden) and Donaldson Filtration GmbH (Germany). The setup includes two Atlas Copco GA132 VSD low-pressure compressors, one Atlas Copco FD160 VSD air dryer, and one Donaldson UFA-AC0016 oil separator. Designed to deliver reliable and energy-efficient air supply at up to 8.5 bar, this system is ideal for continuous production environments. The installation has been regularly maintained, with full maintenance completed in August 2025, and is in good working condition. The entire system is still installed and connected, and immediately available for inspection and sale. Technical data  - Years of Manufacture: 2009 – 2013 - Application: Industrial compressed air system - Total Capacity: 2 × 24.1 m³/min - Maximum Pressure: 8.5 bar - Power Supply: 274.8 kW Scope of Delivery  - Compressor | Atlas Copco | GA132 VSD | 2013 - Compressor | Atlas Copco | GA132 VSD | 2012 - Air dryer | Atlas Copco | FD160 VSD | 2012 - Oil separator | Donaldson Filtration GmbH | UFA-AC0016 | 2009

Condition: used, Year of construction: 2007, operating hours: 7,150 h, Equipment: all wheel drive, Well-maintained Atlas-Terex TW 150 mobile excavator with low operating hours and hydraulic variable-position boom. Technical data: * Operating weight approx. 15.3-17 t Nodpjzk S Aiefx Abwjwi * Engine Deutz TCD2012L042V with 95 kW * Transport dimensions (L x W x H): 5,800 mm x 2,500 mm x 3,150 mm * Max. excavator reach 9,200 mm * Max. digging depth 5,600 mm * Breakout force 82 kN Other: * Ditch cleaning bucket and deep digging bucket included. !!! ATTENTION, sale only to commercial businesses and for export !!!

Condition: used, Year of construction: 2010, Operating hours: 58,730 h Technical data: Max. compressed air pressure: 14 bar Nwjdpfx Aboydlycjwji Ambient temperature, max.: 50°C Refrigerant: R410A, 0.86 kg Connection: 230 V Weight, approx.: 154 kg

Condition: excellent (used), Year of construction: 2015, ATLAS COPCO XAHS186 portable compressor, equipped with an end cooler, after a complete service. Technical data: capacity: 10.50 m3/min; working pressure: 12 Bar; year of manufacture: 2015; DEUTZ engine, 104 kW; mileage: 2016 hours. The compressor is in perfect working order, ready for operation, and comes with a warranty. Net price: 109,500 PLN Nedszk Amxspfx Abwswi Gross price: 134,685 PLN The machine was imported in perfect condition and has all the necessary documents for registration. Links to videos are provided below.

Condition: used, Year of construction: 2022,

Condition: new, Warehouse number: 100533939 Transport dimensions (L x W x H): 0 x 0 x 0 ---- sold! Weight: 24-25 kg Length: 877-927 mm Nodezky Tcepfx Abwowi Depth: 358 mm Width at handles: 623 mm Impact energy: 60 Joules Impact frequency: 1440 bpm

Condition: used, Year of construction: 2022, ---- Data: Frame: Stationary Light type: LED Dimensions (L x W x H): 500 mm x 500 mm x 2200 mm Weight: 45 kg Mast type: Manual, vertical Nodpfx Ajzkzc Sebwowi Maximum height: 3.5 m Power: 1 x 320 W Wind resistance: 50 km/h Mains frequency: 50 Hz

Condition: excellent (used), Year of construction: 2015, ATLAS COPCO XAS137 portable compressor, equipped with an aftercooler, fully serviced. Technical data: flow rate: 7.70 m3/min; working pressure: 7 bar; year of manufacture: 2015 engine: KUBOTA operating hours: 2000 h compressor in perfect working order, ready for operation, with warranty. Nwjdpfx Abezky Nkewsi net price: 59,500 PLN gross price: 73,185 PLN machine imported in excellent condition. Links to videos are provided below.

Condition: repair required (used), Year of construction: 2007, functionality: not functional, Screw compressor Atlas Copco GA250FF Dryer integrated 250 kW 9.75 bar 37.80 m3/min Year of manufacture: 2007 Nedpfx Abjzhu Naswswi Main motor defective Price: 9,000 EUR

Condition: good (used), Year of construction: 1998, operating hours: 1,329 h, fuel type: diesel, motor manufacturer: Yanmar, Field of application: Construction Drive: Wheel Empty weight: 3.380 kg Number of owners: 1 Technical condition: good Visual appearance: good Drill equipment: Tank, Control Panel, Steel canopy Production country: NL Please contact Michael Overmeer for more information = Additional options and accessories = Nwodpfoygwfisx Abwsi - Control Panel - Steel canopy - Tank = Remarks = Atlas-Copco with 1.329 operating hours mounted on a trailer year of construction december 1998 with a hydraulically operated light tower (9 meters), hydraulic support legs and a hydraulic nose wheel. Changes and typographical errors reserved.

Condition: new, functionality: fully functional, machine/vehicle number: 8153336470, overall weight: 616 kg, volume flow: 399 m³/h, pressure (min.): 4 bar, pressure (max.): 13 bar, noise level: 67 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, We are a company specializing in the compressed air industry for over 20 years. Professional level of service and high quality goods offered by our company - "proven" on the market - guarantee successful cooperation with you. We offer NEW screw compressor Atlas Copco GA37VSDs FF (variable speed with built-in dryer) Machine equipped with frequency converter (inverter), manufactured based on the latest technologies, which translates into greater efficiency and performance: On average 20% lower unit energy consumption (SER) than in previous models of the GA VSD series. Ecological and efficient VSD+ variable speed drive system reduces energy consumption by an average of 50% compared to models that operate at idle speed. Regardless of energy savings, efficiency (FAD) increases by up to 12%. Efficient fan motor (compliant with the ERP 2015 directive) reduces energy consumption and noise level. Superior Motor Efficiency (iPM) up to 94.5% exceeding IE3 efficiency levels. Built to work hard for your success. Nwedpfx Aowlp Hdobwei The industry-leading GA Series oil-injected rotary screw compressor delivers unmatched efficiency, high productivity and low cost of ownership – even in the harshest conditions. Technical data: capacity at 4 bar: 15.69- 13.75 l/s / 0.94-7.85 m3/min capacity at 7 bar: 15.67-129.35 l/s / 0.94-7.76 m3/min capacity at 10 bar: 15.68-110.79 l/s / 0.94-6.65 m3/min Max pressure 10 bar (13 Bar variant on request) Voltage 400 V Motor 37 kW Noise 67 dB(A) Weight 616 kg Motor with internal permanent magnets (IPM) Compression element Direct drive Innovative fan Separator/oil filter with durable construction Electronic water drain valve that does not cause compressed air losses Controller Elektronikon Inlet valve VSDs module Manufacturer code: 8153336470 If you are not sure whether the device is right for you, you have not found the right compressor, CALL! We will advise you on the right choice of device. We invite you to familiarize yourself with our full offer.

Condition: used, Year of construction: 2003, Screw compressor, compressor, compressed air unit, stationary compressed air compressor -Handover in its current condition as inspected -defective, not functioning, problem: frequency converter does not communicate with the software -Delivery rate: 3.2-6.9 m³/min -Engine power: 18-24 kW -Structure: encapsulated -Max. pressure: 12.75 bar -Operating hours: 108252 h -Load hours: 30754 h -Year of manufacture: 2003 -Dimensions: 1850/850/H1900 mm -Weight: 592 kg Nedpfxshabk Dj Abwowi

Condition: good (used), Pneumatic double diaphragm pump -Fast venting and immediate suction of the medium -Dry running without: damage -Hermetically sealed for: moisture-sensitive liquids -Excellent for: abrasive liquids with low to medium viscosity and materials sensitive to shear forces: -Air max. Pressure: bar -Air connection: 1 "inch -Water output: l/min -Water max. Pressure: bar -Connection: B coupling -Dimensions: 480/400/H530 mm -Weight: 32 kg Nsdpfx Aedwf S Usbwowi

Condition: used, Hydraulic clamshell bucket, hydraulic rotary grab, clamshell bucket, hydraulic grab -Bucket width: 600 mm -Contents: 400 l -Opening width: 1400 mm Nodjx R Sv Espfx Abwewi -complete: with rotary servo -Mounting bolt: Ø 80 mm -Intermediate mounting dimension: 340 mm -Weight: 700 kg

Year of construction: 2010, condition: good (used), Oil/water separator, oil-water separation system -Dimensions: 660/260/H700 mm Nodpob A Sgkjfx Abwjwi -Weight: 18 kg

Condition: good (used), Pneumatic cylinder, air cylinder, pneumatic piston, air piston, standard cylinder -Manufacturer: Atlas Copco, Standard cylinder type C4-200-40 -Stroke travel: 200 mm Nwedpfx Abogr E R Aswsi -Piston rod: Ø 40 mm -Dimensions: 330/280/H510 mm Total weight: 33 kg

Condition: good (used), Digging bucket, excavator bucket, demolition bucket -Design: stable -Width: 570 mm Nodpfx Ajb A I Insbwowi -Height: 450 mm -Depth: 600 mm -Intermediate mounting dimension: 160 mm -Hole spacing: 220 mm -Bore: Ø 45 mm -extended cutting edge -The design of the spoon attachment can be changed by us for an additional charge. -Weight: 130 kg

Condition: good (used), Digging bucket, excavator bucket, demolition bucket -Width: 600 mm -Height: 600 mm -Depth: 800 mm -Intermediate mounting dimension: 255/200 mm Nedjb A I Rcepfx Abwewi -Bore: Ø 45/50 mm -Laceration teeth -The design of the spoon attachment can be changed by us for an additional charge. -Weight: 160 kg

Condition: used, Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Manufacturer: Atlas Copco, standard cylinder type C4-200-40 Nsdpfxsgrzvke Abwswi -Stroke: 240 mm -Piston rod: Ø 40 mm -Number: 2x cylinders available -Price: per piece -Dimensions: 320/280/H470 mm -Weight: 34 kg/piece

Condition: used, Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Stroke: 250 mm -Piston diameter: 40 mm -Piston rod: 16 mm -Price: per piece -Number: 2 pieces -Dimensions: 410/55/H55 mm Nwsdpfefbnkajx Abwji -Weight: 1.5 kg/piece

Condition: used, Pneumatic cylinders, air cylinders, pneumatic rams, air rams, standard cylinders, compact cylinders -Stroke: 50 mm Nsdofbmu Sspfx Abwswi -Piston diameter: 50 mm -Piston rod: 16 mm -Price: per piece -Number: 2 pieces -Dimensions: 100/65/H65 mm -Weight: 0.75 kg/piece

Condition: used, Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder Nodpfx Aogr E R Uobwjwi -Manufacturer: Atlas Copco, standard cylinder type C4-200 40-200 -Stroke: 194 mm -Piston rod: Ø 40 mm -Total dimensions: 220/265/H645 mm -Total weight: 24 kg

Condition: used, Manual trolley, push trolley, crane trolley, trolley drive, crane drive, crane drive, trolley -Barrier width: max. 100 mm -Payload: 2500 kg -Dimensions: 327/200/H270 mm Neded N Rt Depfx Abwewi -Weight: 27 kg

Year of construction: 2005, condition: used, Balancers, machine balancers, spring balancer, cable pulley, counterbalance weight balancers -Manufacturer: Atlas Copco, type RIL 10C Nedpfx Abogggy Eswowi -Load capacity: 2.0 - 5.0 kg -Dimensions: 200/250/70 mm -Own weight: 2.6 kg

Condition: like new (used), Year of construction: 2022, S016865 PROD. ATLASCOPCO Nwodpfx Abjzi Unlewsi TYPE GA22VSD S/N API469861 YEAR 2022 POWER (kW) 22 CAPACITY (m3/min) 4.9 PRESSURE (bar) 10.5 HOURS (RUNNING/TOTAL) 3184 FREQUENCY CONVERTER yes BUILT-IN DRYER no HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS yes