Used Atlas 1304 K for sale (434)

Condition: like new (used), Year of construction: 2022, S016865 PROD. ATLASCOPCO TYPE GA22VSD Hedszi Unlopfx Aa Ejnp S/N API469861 YEAR 2022 POWER (kW) 22 CAPACITY (m3/min) 4.9 PRESSURE (bar) 10.5 HOURS (RUNNING/TOTAL) 3184 FREQUENCY CONVERTER yes BUILT-IN DRYER no HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS yes

Condition: excellent (used), Year of construction: 2010, PROD. ATLASCOPCO TYPE S/N API461445 YEAR 2010 POWER (kW) 22 CAPACITY (m3/min) 3.61 PRESSURE (bar) 7.5 HOURS (RUNNING/TOTAL) FREQUENCY CONVERTER no Hnedpfxozi T Dxo Aa Eep BUILT-IN DRYER no EXCHANGER no COOLED (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTION 1 1/4 NEW/USED USED

Condition: used, Year of construction: 2003, Screw compressor, compressor, compressed air unit, stationary compressed air compressor Hnedohabk Dspfx Aa Eep -Handover in its current condition as inspected -defective, not functioning, problem: frequency converter does not communicate with the software -Delivery rate: 3.2-6.9 m³/min -Engine power: 18-24 kW -Structure: encapsulated -Max. pressure: 12.75 bar -Operating hours: 108252 h -Load hours: 30754 h -Year of manufacture: 2003 -Dimensions: 1850/850/H1900 mm -Weight: 592 kg

Condition: good (used), Pneumatic double diaphragm pump -Fast venting and immediate suction of the medium -Dry running without: damage -Hermetically sealed for: moisture-sensitive liquids Hnodpfodwf S Usx Aa Esp -Excellent for: abrasive liquids with low to medium viscosity and materials sensitive to shear forces: -Air max. Pressure: bar -Air connection: 1 "inch -Water output: l/min -Water max. Pressure: bar -Connection: B coupling -Dimensions: 480/400/H530 mm -Weight: 32 kg

Year of construction: 2010, condition: good (used), Oil/water separator, oil-water separation system Hsdpfx Aob A Sgkoa Eenp -Dimensions: 660/260/H700 mm -Weight: 18 kg

Condition: used, Hydraulic clamshell bucket, hydraulic rotary grab, clamshell bucket, hydraulic grab -Bucket width: 600 mm -Contents: 400 l Hnodjx R Sv Eopfx Aa Eep -Opening width: 1400 mm -complete: with rotary servo -Mounting bolt: Ø 80 mm -Intermediate mounting dimension: 340 mm -Weight: 700 kg

Condition: good (used), Digging bucket, excavator bucket, demolition bucket Hodeb A I Injpfx Aa Eenp -Design: stable -Width: 570 mm -Height: 450 mm -Depth: 600 mm -Intermediate mounting dimension: 160 mm -Hole spacing: 220 mm -Bore: Ø 45 mm -extended cutting edge -The design of the spoon attachment can be changed by us for an additional charge. -Weight: 130 kg

Condition: good (used), Digging bucket, excavator bucket, demolition bucket -Width: 600 mm -Height: 600 mm -Depth: 800 mm -Intermediate mounting dimension: 255/200 mm -Bore: Ø 45/50 mm -Laceration teeth -The design of the spoon attachment can be changed by us for an additional charge. -Weight: 160 kg Hsdpfx Aajb A I Rcs Esnp

Condition: good (used), Pneumatic cylinder, air cylinder, pneumatic piston, air piston, standard cylinder Hodpogr E R Asfx Aa Eenp -Manufacturer: Atlas Copco, Standard cylinder type C4-200-40 -Stroke travel: 200 mm -Piston rod: Ø 40 mm -Dimensions: 330/280/H510 mm Total weight: 33 kg

Condition: used, Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Manufacturer: Atlas Copco, standard cylinder type C4-200-40 -Stroke: 240 mm -Piston rod: Ø 40 mm -Number: 2x cylinders available -Price: per piece -Dimensions: 320/280/H470 mm Hsdpfx Ajgrzvkoa Esnp -Weight: 34 kg/piece

Condition: used, Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Stroke: 250 mm -Piston diameter: 40 mm -Piston rod: 16 mm -Price: per piece -Number: 2 pieces Hnodpfofbnkajx Aa Esp -Dimensions: 410/55/H55 mm -Weight: 1.5 kg/piece

Condition: used, Pneumatic cylinders, air cylinders, pneumatic rams, air rams, standard cylinders, compact cylinders -Stroke: 50 mm -Piston diameter: 50 mm -Piston rod: 16 mm -Price: per piece -Number: 2 pieces -Dimensions: 100/65/H65 mm Hjdpfx Asfbmu Ssa Ejnp -Weight: 0.75 kg/piece

Condition: used, Manual trolley, push trolley, crane trolley, trolley drive, crane drive, crane drive, trolley Hnsdpfx Asd N Rt Doa Eep -Barrier width: max. 100 mm -Payload: 2500 kg -Dimensions: 327/200/H270 mm -Weight: 27 kg

Condition: used, Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder Hnodpfx Aegr E R Uea Ejp -Manufacturer: Atlas Copco, standard cylinder type C4-200 40-200 -Stroke: 194 mm -Piston rod: Ø 40 mm -Total dimensions: 220/265/H645 mm -Total weight: 24 kg

Condition: good (used), Year of construction: 2014, functionality: fully functional, operating pressure: 10 bar, Compressor system consisting of: Screw compressor: Atlas Copco GA11VSD+ Refrigeration dryer: Atlas Copco FD70 Pressure accumulator Öwamat 4 Hjdpfx Aaovu A Hdj Eenp Oil-injected screw compressor with variable speed control Max. operating pressure: 10.0 bar Engine power: 11 kW Volume flow: 25.5-115.2 m³/h Control hours: 61,837 h Operating hours: 21,094 h Engine starts: 267,928 Load cycles: 315,576

Condition: new, Compressor screw Manufacturer: Atlas Copco Hnodpfx Aaevi Hbhj Eop Suitable for the following models: GA90, GA110, GA132, GA160, GA180VSD, GA200, GA250 Lightweight Price per piece

Condition: excellent (used), Year of construction: 2014, S016896 PROD. ATLAS COPCO TYPE GA75VSDFF S/N API668061 YEAR 2014 Hsdpfx Aozi Dbhea Ejnp POWER (kW) 75 CAPACITY (m3/min) 15.09 DISCHARGE PRESSURE (bar) 12.75 HOURS (SERVICE/TOTAL) FREQUENCY CONVERTER yes BUILT-IN DRYER yes, R410a 1.1kg HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no NEW/USED USED

Condition: excellent (used), Year of construction: 2003, Air Compressor Hodpsww Nv Nofx Aa Eenp Atlas Copco Type: GA 18AFFVSD Year of manufacture: 2003

Condition: excellent (used), Atlas Type: CI3000 F Atlas CI3000 Xenon Fade-Ometer The Ci3000+ Weather-Ometer and the Fade-Ometer, with their advanced digital control systems, represent significant advancements in the application of digital and optical technologies in user-friendly laboratory weathering devices. The 3000 series has been approved by many OEMs in the textile, paint, and coatings industries, as well as in the plastics industry, as an exclusive platform for precise, reproducible, and repeatable results for predicting service life. Features: Climate type Test type: Sunlight simulation Light source: Xenon arc lamp Applications: Additives and dyes Hnsdpfx Aaezg Tmhe Ejp Adhesives and sealants Architecture and construction Automotive industry Food and beverages Graphics Packaging Paints and coatings Photovoltaics Plastics Textiles Wind and solar Consumer electronics Compressed air supply The CI3000’s humidification system uses a compressed air ultrasonic spray nozzle. Before entering the unit, the compressed air must pass through a water/oil separator. The small air regulator in the CI3000 contains a second water-oil filter and a 5-micron particulate filter. Ensure that a separate oil-water separator is installed and do not rely on the filter in the air regulator, as it is only designed as an additional device. Compressed air specifications Pressure: 80-100 PSI (552-689 kPa) Flow rate: 4 CFM (0.11 m³/min) Dimensions: Overall dimensions of the CI3000 37.5” Width x 29” Depth x 72” Height (95 cm Width x 73 cm Depth x 183 cm Height) Required footprint: 41.5” Width x 80” Depth (105 cm Width x 203 cm Depth) Total weight: 404 kg Voltage: 380-220 V 38 A 50 Hz ~3/N/PE 8 kW 404 kg Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have by telephone.

Condition: good (used), Year of construction: 1988, Manufacturer: Atlas Copco Type: GA 230 Hedpfxshyglaj Aa Ejnp Max. final pressure: 13 bar Free air delivery: 50 l/sec Motor power: 30 kW Max. speed: 1500 r/min

Condition: good (used), gearing type: automatic, fuel type: diesel, first registration: 07/1994, Year of construction: 1994, operating hours: 12,130 h, Drive: Wheel drive Number of cylinders: 4 Gross vehicle weight rating (GVWR): 18,000 kg Dimensions (L x W x H): 850 x 255 x 325 cm Hodpfszivd Iox Aa Eenp Please contact Vitali Lenda for further information.

Condition: used, Year of construction: 2004, Compressor type: Oil-injected rotary screw compressor with integrated refrigerant dryer Motor power: 15 kW (20 HP) Power supply: 380 V / 50 Hz Operating pressure: 7.5 bar Free Air Delivery (FAD): 798 m³/h (approximately 13.3 m³/min) Noise level: 68 dB(A) Tank capacity: 400 liters Dimensions (L × W × H): 1,000 × 660 × 1,400 mm Weight: 450 kg Cooling: Air-cooled Hnsdpfxewgca To Aa Eep Integrated dryer: Yes Control system: Elektronikon®

Year of construction: 2014, condition: ready for operation (used), Three Atlas Copco compressed air compressors are available. 1) Oil lubricated screw compressor Atlas Copco GA18 VSD, year of manufacture: 2014, max. operating pressure: 13bar, power: 18kW, max. air flow: 216m³/h, machine dimensions X/Y/Z: approx. 1300mm/900mm/1500mm, weight: approx. 550kg, operating hours: approx. 69000h. 2) Oil lubricated screw compressor Atlas Copco GA15, year of manufacture: 1998, max. operating pressure: 13bar, power: 15kW, max. air flow: 155m³/h, machine dimensions X/Y/Z: approx. 1900mm/700mm/1600mm, weight: approx. 400kg, operating hours: approx. 69000h. 3) Oil lubricated screw compressor Atlas Copco GA15 for spare parts. Documentation available. An on site inspection is possible. Hnodpszipgvofx Aa Eop

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: APF 136194, overall weight: 2,550 kg, total length: 2,900 mm, total width: 1,450 mm, total height: 2,200 mm, space requirement length: 3,000 mm, space requirement width: 1,600 mm, motor manufacturer: ABB, fuel type: electric, Screw Compressor with Inverter ATLAS COPCO ZT 55 VSD 18.5kW 3.35m3/min 13bar The professional level of service and high-quality goods offered by our company – 'market-proven' – guarantee successful cooperation with you. We provide a warranty on used compressors and dryers! Our advantage is 24/7 compressor service. Screw Compressor with Inverter ATLAS COPCO GA18VSD 18.5kW 3.35m3/min 13bar Hsdpfxoy Amh He Aa Ejnp Technically sound, ready for operation.

Condition: excellent (used), Atlas Type: CI3000+ Ci3000+ Weather-Ometer/Fade-Ometer Model: CI3000W Year of manufacture: 06/2022 Operating time: Device 816.5 hours Lamp operating time: Device 647.4 hours Total lamp operating time: 88.9 hours Atlas CI3000+ Xenon Weather-Ometer with calibration case The Ci3000+ Weather-Ometer and Fade-Ometer, with its advanced digital control systems, represent monumental achievements in the application of digital and optical technologies in easy-to-use laboratory weathering devices. The 3000 series has been approved by many OEMs in the textile, paint, and coating industries, as well as the plastics industry, as an exclusive platform for precise, reproducible, and repeatable results for predicting service life. The 3000 series has been certified according to CE, UL, CSA, ISO, and EN standards. The main features of this device are: a rotating sample rack to maximize the homogeneity of all samples; customizable nozzles for uniform front and back spraying of samples; ASTM black panel thermometer or ISO/DIN black standard thermometer for regulating and monitoring the temperature at the sample level to ensure the repeatability of the tests. 4500 W water-cooled xenon lamp Total exposure area 2188 cm2 (339 in2) 12-inch TFT full-color touchscreen control panel - displays all test parameters Direct setting and control of black panel (BPT, non-insulated) or black standard (BST, insulated) temperature Direct setting and control of relative humidity Direct setting and control of the air temperature of the sample chamber Display of diagnostic messages Hjdpfx Aajzgr Nhj Esnp 14 factory-preprogrammed test methods (Weather-Ometer); 6 factory-preprogrammed test methods (Fade-Ometer) Properties: Type: Climate Test type: Sunlight simulation Light source: Xenon arc lamp Applications: Additives and dyes Adhesives and sealants Architecture and construction Automotive industry Food and beverages Graphics Packaging Paints and coatings Photovoltaics Plastics Textiles Wind and solar Consumer electronics Voltage: 340-415V 43A 50/60Hz 〜3/N/PE 8kW 410 kg Condition: used Scope of supply: (See image) (Subject to change and errors in the technical data, information provided!) We will be happy to answer any further questions you may have by telephone.