Used Aspiration System for sale (67)

Condition: good (used), Year of construction: 2012, ASPIRATION POLYTECHNIK VACUMOBIL VT 160-L 1950m3/h, 2.2kW motor Can be installed in the work area (depending on dust type) Low residual dust concentration in return air < 0.1 mg/m³ (H3) according to TRGS 553 Closed air circuit, 100% utilization of thermal energy Large collection capacity with 1 mobile bin Height less than 2 m (intake mouth height center: 1.5m) Programmable control with automatic start (potential-free contact) No rupture vent required for St1 dusts IFA-certified filter media (retention rate 99.95%) Knedpfx Asxzt Stsffsf Low energy consumption, high suction power IE3 motor, energy efficient Automatic filter bag cleaning

Condition: used, This listing is for a Varian Autosampler Model 410 unit on it's own. The Varian ProStar 410 HPLC Autosampler has variable injection volumes and automixing/autodiluting. The ProStar 410 is perfect for laboratories with changing needs. It provides flexible operation without sacrificing reliability or performance. Multiple injection modes for flexibility, ease of use, and precision. Full loop filloverfills the sample loop for maximum precision. Partial loop fill allows easily programmed variable injection volumes. Microliter pickup withdraws the exact amount to be injected without sample loss. The Varian ProStar 410 AutoSampler offers the best of both worlds. It is intelligent for research applications yet rugged enough for routine quality control work. With Pressure Assisted Sampling Aspiration (PASA), the Varian 410 ProStar AutoSampler applies pressure within the vial while the sample is withdrawn by a high-resolution syringe. Air bubbles and in-vial vacuum problems are eliminated resulting in excellent reproducibility. Flexibility with multiple injection modes Optimal performance with integrated column oven Biocompatible and sample cooling options available Specifications: Standard sample tray 84 x 1.5 mL vials with 3 x 10 mL vials Optional sample trays 96 x 2.5 mL vials or 24 x 10 mL vials Dispenser unit 50 µL syringe standard; 1000 µL or 2500 µL syringes, optional Injection volume 1 to 5000 µL with preparative option up to 10 mL Injection methods nine methods in memory Needle wash integrated, programmable large reservoir Vial detection Yes Reproducibility Full Loop: < 0.3% RSD Partial Loop: < 0.5% RSD Microliter Pickup: < 1.0% RSD Carryover < 0.05% Optional sample cooling 4°C to 15°C programmable Can be refurbished on request, refurbishment not included in price. Kodpfsxzh Amsx Affjnf

Condition: used, mileage: 25,045 km, power: 96 kW (130.52 HP), first registration: 02/1983, overall weight: 7,490 kg, fuel type: diesel, color: blue, gearing type: mechanical, loading space width: 2,400 mm, loading space length: 3,000 mm, loading space height: 1,600 mm, total length: 7,100 mm, total width: 2,500 mm, total height: 2,990 mm, number of seats: 6, Equipment: all wheel drive, parking heater, +++Long double-decker ++ Power steering ++ Fair condition +++ H-certificate+++ +++ Originally only 25,045 km +++ +++ Already equipped with side impact and underride protection +++ +++ Thus prepared for technical modification to truck type +++ LA 911 B with long double cab, 130 hp naturally aspirated diesel engine, 4x4 all-wheel drive, and power steering, directly from the German Federal Agency for Technical Relief (THW), regularly serviced, 9 seats, all with seatbelts. During the technical modification to truck type, the number of seats had to be reduced to 6 – but the remaining seats can be used as seats when stationary. Tow bar ring eye with braked towing capacity of 9,500 kg, transfer case with low-range gearing and 2 differential locks (center and rear), technically sound and roadworthy. From a technical perspective, the truck has undergone a fresh inspection, including lubrication, new fuel filters, a new air dryer cartridge, a brake fluid service, and a check of all fluid levels. The wheel brakes were also checked and adjusted. Ksdpfx Afswfbg Asfonf We also replaced the seal on the rear axle differential. The body of the cab and superstructure has already been repaired several times by the THW and repainted by hand. It is in good condition and free of rust. The paintwork is rather dull in places. This was taken into account when determining the price. The engine starts immediately and the transmission shifts smoothly—the 911 runs perfectly. Box dimensions: 3000 x 2450 x 1700 mm Wheelbase: 4250 mm +++ Errors, changes, and prior sale reserved.

Condition: used, mileage: 21,000 km, power: 58 kW (78.86 HP), first registration: 11/1989, overall weight: 3,500 kg, fuel type: diesel, color: red, next inspection (TÜV): 02/2026, gearing type: mechanical, loading space width: 1,730 mm, loading space length: 3,250 mm, loading space height: 1,830 mm, Year of construction: 1989, total length: 5,350 mm, total width: 1,975 mm, total height: 2,700 mm, number of seats: 2, 1st hand – German volunteer fire brigade. Directly from the garage, deregistered as of 26.08.2025; up until then, always registered with the original title document and even the vehicle registration from 1989. Only 21,000 total kilometers driven. MOT valid until 02/2026. Very sound Bremer T1 panel van, mid-length version with factory steel high roof. Body condition in detail: Only 2 rust spots (rear right wheel arch and left side panel). Nothing else—not even at the "typical Bremer rust spots," which are all "clean" on this vehicle and have never been reworked. Only the front right wheel arch has been repaired. Normal wear and tear present. Underside is in good shape. Overall, a really good vehicle for its 36 years. The vehicle was explicitly sold to us by the original municipal owner as "accident-free." As-new winter tires (DOT 2022). Tall 270-degree rear doors and fog lights, rear axle stabilizer, and reinforced shock absorbers. Otherwise, absolute base version. No seat belts. No power steering. No ABS. Pure 1980s—back when durable, reliable vehicles were still built. There is hardly anything here that can break. Kedpfx Aew Tpfusffjnf OM 601 4-cylinder naturally aspirated diesel engine with 79 hp. 5-speed manual gearbox. 127 km/h is the registered maximum speed. When opened, a large mechanical running board extends from the sliding door. The vehicle was used by the fire brigade as an equipment transporter (GW) and has several racking installations, which can easily be removed if not needed. Conversion carried out by: Hermann Schmitz KG, 5901 Wilnsdorf near Siegen. Registered as "Other vehicle, fire engine." Unladen weight 2,320 kg (including all fittings). Permissible gross weight – original from factory, unchanged since 1989 – exactly 3,500 kg. This means this 308 D-KA can be driven immediately with the current car driver’s license. The emergency lighting system has been removed and is no longer included. The vehicle runs very well; the transfer journey on the motorway was a real pleasure. This offer is only available to commercial buyers or public authorities. Sale subject to intermediate sale and errors. The purchase price is final, gross = net. Differential taxation according to §25a UStG as a government vehicle. Therefore, 19% VAT will not be added. VAT cannot be shown separately or deducted from the purchase price.

Condition: used, Year of construction: 2011, For sale: CNC machining centre profit H20 Format-4 Felder - year 2011. The machine is in continuous operation and can currently be inspected under power! 3-axis centre with preparation for a 4th axis. Working area 1250x3150mm, Z height=100mm, possibility to work on two separate working zones. In 2024, the electrospindle was refurbished. Kjdexg Ehdspfx Affsnf All repairs and maintenance carried out by a qualified service provider. Loading is provided. Transport is the responsibility of the buyer – flatbed truck with a bed length of 7-8m required. Requirements to connect the machine: - Electric cable 5x4mm2 with a plug compatible with workshop sockets - Electrical protection (at least) 32A industrial, matched to motor power. General rule: rated current indicated on the machine (nameplate) +40% - Pneumatic connection, internal diameter at least 12mm - Compressor with capacity of at least 100l/min - Extraction/aspiration system VAT invoice provided. Price shown is net. For any questions please contact us by phone or email.

Condition: used, Year of construction: 1988, Technical details: Knjdpfx Asu Nwitjffjf intake capacity: 1200 m³/h aspiration hole diameter: 230 mm total power requirement: 1,1 kW weight of the machine ca.: 110 kg dimensions of the machine ca.: 1,2x0,7x2,0 m mobile compact filtering device with suction arm length = 2800mm ( suction diameter 230mm) (tube dia160mm). 3 chamber fitering system application: smoke-and dust, such as welding smoke and skome filtration test run has been proceeded succesfully *

Condition: new, Year of construction: 2022, AVAILABLE FROM STOCK : Geka plasma cutting machine GCS P-4020 table size 4000 x 2000mm incl. plasma source Hypertherm 125A incl. PRONEST HYPETHERM NESTING SOFTWARE - GEKA CNC cutting table - Hypertherm Powermax 125A - cutting capacity: steel 25mm, stainless steel 20mm, aluminium 12mm - CNC control with GproCUT 2D CAD cutting software - Nesting included. - Country of manufacture Spain incl. CE conformity. - Heavy duty base for increased support and rigidity. - CNC Tex computer control with touch screen. - Linear guides on all axes for high repeatability. - Safety cutting head to prevent damage to the cutting head. - Rack and pinion gearbox with 70kg/cm servo motors. - Fully enclosed cable drag to protect cables from damage. Kedpfjgypclox Affenf - Movement speed 40 meters/min. - Resolution 0.01mm. - Optional automatic lubrication on all axes. - Optional, separate suction chambers in the machine bed. - Z-axis with integrated THC (Torch Height Control) to ensure automatic cutting distance between torch and material during the entire cutting process. - Torch anti-collision system (machine stops before any collision). - Laser pointer to check X and Y axes for zero reference. - The effective cutting area for P-4020 is 4000 x 2000mm. - Portal height Z = 100 mm. - Table with compartements for aspiration

Condition: used, This listing is for a Sysmex PU-17 Pneumatic Unit. The unit is in full working condition and is ready for immediate release. The Sysmex PU-17 Pneumatic Unit vacuum pump is an essential component for haematology analysers, particularly in streamlining blood sample analysis. Kjdpfx Aexxyh Njffonf Features: - Functionality: Vacuum Source: The PU-17 generates a reliable vacuum that is critical for the proper operation of haematology analysers. This vacuum allows the machine to aspirate blood samples efficiently, ensuring that the analyses—like cell counting and haemoglobin measurement—are accurate and consistent. - Compatibility: Designed for Specific Models: It is specifically compatible with Sysmex haematology analysers, such as the Sysmex XN-1000 SA-01. This means that labs using these analysers can integrate the PU-17 easily, ensuring optimal performance without the need for extensive modifications. - Importance in Haematology Testing: Efficiency in Testing: By providing a stable vacuum, the Sysmex PU-17 enhances the reliability of haematology tests, which are critical for diagnosing various conditions, including anaemia and infections.

Condition: used, mileage: 57,537 km, power: 195 kW (265.13 HP), first registration: 11/1991, fuel type: diesel, overall weight: 17,000 kg, axle configuration: 2 axles, color: orange, gearing type: mechanical, total width: 2,500 mm, total height: 3,280 mm, loading space length: 5,100 mm, loading space width: 2,450 mm, loading space height: 1,650 mm, Year of construction: 1991, Equipment: ABS, Decent LF24 on MB SK 1726 in 4x2 with water tank 2800l + 200l foam Rear pump 24/8, 2x quick attack, roof projector, pneumatic light mast in the driver's cab AHK ring eyelet 24 t, towing weight 40t Cabin and body are free of corrosion Wheelbase: 4600 mm Cabin dimensions behind driver's seat: 1650 x 2450 x 1650 mm (LxWxH) Body dimensions: 4850 x 2450 x 1650 mm (LxWxH) The 8-cylinder naturally aspirated diesel engine runs well and the 8-speed split transmission shifts well The spring brake cylinders on the rear axle and the starter batteries are new Kjdpfsvrwmaex Affsnf The vehicle is ready for use immediately +++ Errors, changes and prior sale reserved

Year of construction: 2017, condition: like new (used), functionality: fully functional, machine/vehicle number: PII n. 1681, Impact Refiner Mill type P-II Feeding: the mill must be supplied in a regular, continuous, and consistent manner. Loading port on the front cover. Usable opening 305 x 250 mm. Cast iron housing with hinged front cover, equipped with a safety microswitch. Replaceable protective plates on the front and rear covers. Peripherally toothed grinding liners, cast in high-chromium alloy, with adjustable distance from the hammers. Disc rotor with 4 fixed high-mass hammers, cast in manganese steel. The rotor can be removed through the front cover. Shaft mounted on roller and ball bearings, grease-lubricated and protected by dustproof labyrinth seals. Perforated grid; the grid is removable through the front. Rotation speed: 1800-2400 rpm. Pulley for V-belts. Required power: 22-30 kW. Drive unit: 1 x 30 kW motor, pulley, belts, tensioner, and protective guard. Kjdpfxexrk Ito Affsnf Support frame for mill and motor, complete with connection for aspirated discharge.

Condition: good (used), functionality: fully functional, fuel type: diesel, Year of construction: 2010, Used D7R bulldozer Manufactured by Caterpillar Knsdpjul Uhqjfx Affof Model - CAT D7R Operates on Diesel Engine Aspiration Turbo Charged Gross power 247hp No. of Cylinders 6 Operating Weight 54200 lbs Height 135cm Max Speed - Forward 6.8mph Located in Singapore More information Please contact VIJAY JPN Industrial Trading Pte Ltd 13A Pandan crescent, Singapore 128478

Condition: like new (used), functionality: fully functional, Year of construction: 2015, operating hours: 10,740 h, Composed of: OPTIMO machine + CNC control panel P30L S/N 15/40 - 0083-01, CV4000 laser Working hours: 10740. Linear axis strokes: 4500x2500x1020mm (XYZ) Rotary axis strokes: A axis +- 360º continuous, B axis +- 135º. Adaptive axis stroke (with part position sensor) C axis +- 10 mm Knjdpfxswcfzfo Affef Maximum speed of the linear axes (XYZ) 50 m/min Max. combined speed of linear axes 85 m/min Maximum speed of rotary axes A,B 540º/sec Acceleration of rotary axes A,B 60 rad/sec2 Power supply 400V, three-phase, 50hz Prima Power wired remote control S/N 14/06 00489 4000W CO2 laser source Hyfra Sigma 52-S collar, installed power 53kw/58kva. Aspiration and dust treatment system Donaldson DFPRO12, installed power 15kw/18kva. Donaldson MD2 Micro Dosing System

Condition: used, Year of construction: 2021, Number of spindles 5 St. Working width 250 mm Working height 160 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 6-24 m/min. control K2 Basic 7"-Touch KUPER SWT XL-5 AUTOMATIC PLANER AND MOULDER ----- Knedpfx Aswgwmneffof LIKE NEW, showroom machine ! - 5 spindles: bottom, right, left, top, bottom - Speed: frequency-controlled 4,000 - 6,000 rpm, spindle 4.5 to 8,000 rpm - Width and height motor-controlled: left spindle radial upper spindle axial - Feed carrier motor-controlled - Additional motor-controlled positioning: right spindle radial and axial left spindle axial - working width 250 mm TECHNICAL DATA ----- Working width (perimeter of tools 163 mm) 15 - 230 mm Working height(perimeter of tools 163 mm) 10 - 150 mm (perimeter of tools 123 mm) 10 - 160 mm Min. workpiece length: single piece: min. 800 mm piece by piece: min. 300 mm The processing of the work pieces is depending on the following operating parameters: material, wood moisture, tools, diameter of the chip removal and feed speed. If necessary adjustments to the operating parameter have to be done. SPINDLE CONFIGURATION ----- bottom, right, left, top, bottom 1st spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 250 mm Usabale length for tools Spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 125 - 160 mm Reference cutter Diameter difference 20 - 25mm to the cutterhead Connecting piece D = 125 mm Quick action lock nut Pro-Lock 2nd spindle: VERTICAL, RIGHT ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 165 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Adjustment path axial 60 mm Adjustable table plate to tool radius Standard profile depth 20 mm Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 3rd spindle: VERTICAL, LEFT ----- Siemens IE3 motor with inverter brake 7,5 kW (10 HP) Diameter 40 mm Spindle length 165 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Adjustment path axial 60 mm Standard profile depth 20 mm Adjustable table plate to tool radius Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 4th spindle: HORIZONTAL, TOP ----- Siemens IE3 motor with inverter brake 7,5 kW (10 HP) Diameter 40 mm Spindle length 235 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Pressure shoe pneumatically, via linear guides dynamically adjustable Standard profile depth 20 mm Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 5th spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 235 mm Usable length for tools spindle lenght minus approx. 6 mm Drive, frequency-controlled...

Condition: used, This listing is for a 1 of 2 Charles Austin Capex 8C Diaphram Pump. The unit is in full working condition and is ready for immediate release. The Charles Austin Capex 8C is a highly efficient diaphragm pump designed to deliver a clean, oil-free vacuum and pressure source tailored for laboratory benchtop use. With its durable alloy casing and advanced engineering, the Capex 8C sets a new standard in versatile laboratory vacuum and pressure solutions. Kjdoxxx U Ispfx Affenf Features: - Oil-Free Operation: Ensures a clean environment, making it suitable for sensitive applications like microbiology and IVF treatments. - Quiet Running: Designed for low noise levels, ideal for use in laboratories without disrupting ongoing work. - Compliant with IEC 1010: Meets electrical safety standards, ensuring safe operation in laboratory settings. - Versatile Applications: Perfect for vacuum and pressure-assisted filtration, residue analysis, gas monitoring, and evacuating rotary evaporators or desiccators. - Lightweight Design: Easy to transport and reposition, enhancing usability across different workstations in a lab. Key Specifications: - Maximum Flow Rate: 8 L/min - Vacuum Level: 240 mbar (excellent for sensitive applications) - Pressure Capability: 200 kPa - Motor Type: Shaded pole motor for quiet and efficient operation - Dimensions: 282 mm (W) x 214 mm (D) x 137 mm (H) - Weight: 3.75 kg (lightweight and portable) Multipurpose Applications: - Microbiology Experiments: Ideal for creating a sterile environment during sample handling. - Embalming Procedures: Provides reliable pressure and vacuum for fluid transfer. - IVF Treatment: Ensures a clean, controlled environment for sensitive biological processes. - Waterjet Pump Replacement: A reliable alternative for general laboratory duties. - Aspiration and Filtration: Effective for removing particles and contaminants from samples. - Beauty Therapy: Used for vacuum treatments in cosmetic procedures.

Year of construction: 2023, condition: as good as new (ex-display), DIBIPACK EVOLUTION: THE CUTTING EDGE TECHNOLOGY INHEAT-SHRINKING. Only one operator. Great performances for remarkable outputs. Advanced control and management of cycle. DATA SHEET SPECIFICATIONS – DIBIPACK 4255 SA EV Sealing area: mm 420×550 Sealing system: bottom blade Hold down magnet: standard Programs: 8 Unit counter: standard Power supply: 400 V – 3 Ph + N Maximum power required: kW 6 Power consumption: kW/h 2,9 Overall machine dimensions: mm 2060×700 Working plate height (on stand): mm 920 MORE INFORMATION: Fully electronically controlled (second generation board) Automatic adjustment of sealing time according to production speed Stand-by function (energy saving) Unit-counter Gas spring for hood lift The hold down solenoid keeps the hood closed until the end of the shrinking cycle Stainless steel take out conveyor belt – automatic control Take out belt adjustable in hight Active carbon filter aspirator with activated carbon (standard) Knodpfx Asmv Ebuoffjf Including 1 roll of foil And U.V.V testing

Year of construction: 2024, condition: like new (used), functionality: fully functional, machine/vehicle number: 40423, The MACSQuant Analyzer 16 is a benchtop, automated flow cytometer engineered for multi-parameter cell analysis, offering convenience, sensitivity, and flexibility for both research applications and advanced cell therapy workflows. As part of the MACSQuant product line, this model improves upon previous generations by delivering 16 optical parameters (i.e., multiple fluorescence detection channels) while maintaining a compact footprint and a high degree of automation. Typical applications include immunology, immunophenotyping, cell and gene therapy (CGT) analytics, quality control processes, and general cell biology research. Key Features & Capabilities Highlighted advantages and system features: Feature Description / Details Optics & Detection - Outfitted with three spatially separated lasers: 405 nm, 488 nm, and 640 nm. - Provides 16 detection/optical parameters (multiple fluorescence channels, plus scatter signals). - Signal detection covers FSC (forward scatter), SSC (side scatter), and multiple fluorescence channels (e.g., V1–V5, B1–B6, R1–R3), each equipped with optimized photomultiplier tubes (PMTs). Fluidics / Sample Handling - Minimum sample uptake: as little as 1 µL (recommended ~25 µL for precise volumetric counting). - Adjustable sample flow rates: 25, 50, or 100 µL/min, or automated regulation to achieve target event rates (e.g., 500, 1,000, or 2,000 events/second). - Maximum event rate: up to approximately 15,000 events/second (ALT mode). - Compatible with various sample vessels, including 1.5, 2, and 5 mL tubes, tube racks, and 96-well plates. Transition between tubes and plates is user-friendly. Kedpfexg Ndiex Affonf - Utilizes an automated robotic needle arm for sample aspiration, thorough mixing, and automated washing of both the injection port and needle before and after runs. Automation & Workflow - Full automation for maintenance routines, PMT gain calibration, fluorescence compensation, sample acquisition, and analysis. - "Express Modes" (pre-set protocols) and templates support reproducible sample acquisition and data processing workflows. - Harmonization features for cross-instrument and multi-site data alignment, promoting data standardization for multi-center studies. - Regulatory and compliance support: offers 21 CFR Part 11-compatible features (audit trail, user management, electronic signatures, and reporting), making it ideal for clinical and translational research labs. Sensitivity & Performance - High fluorescence sensitivity: e.g., for standard dyes — FITC < 110 MESF, PE < 75 MESF, APC < 100 MESF - High precision:

Year of construction: 2001, condition: good (used), machine/vehicle number: 129603-40-6, Technical data: Kedpfsd Aai Tox Affenf -Saw blade size 300 x 3.4 x 32 mm -Blade rotation speed RPM -Section - at 90 ° round 90 mm - or square-80 mm -Pneumatic chucks -Material supplies automatic position control -Easy lifting up to approx. 1000 mm -Multiple hub -Swing-arm control panel with CNC control MEP -MOT. Dust aspiration + mobile chip extraction -Drive 400 V / 1,1 kW - space requirement approx. B 2750 x H 1800 X 2000 mm -Weight approx. 600 kg

Condition: ready for operation (used), Year of construction: 2010, 5 AXIS CNC WORKING CENTER BALESTRINI MOD. POWER 200 300 CE - USED - Strokes: X-U 4000mm. Y 4000 mm. Z 700 mm. A 1000 ° C 400 ° (+/- 200 °) - N. 2 working tables 1400x3000 mm - N. 3+3 rails per each working table - N. 3+3 CSR supports per each table - Head type CS 44 (n. 4 motors 7.5 kW each) - Rpm 0/24000 g/min. with inverter - HSKC40/ER32 chuck - N. 2 inverters - Wooden waste aspiration/cleaning device - Becker vacuum pump 100 mc - Electrical panel air conditioner - Num Axium control - T-CAS software - Remote support - Communication PC/CN TCP/IP - Cabin + roof - CE rules - Year 2010 Knedjk Uicgepfx Affjf COMPLETELY RECONDITIONED

Condition: used, Year of construction: 2021, Number of spindles 5 St. Working width 230 mm Working height 160 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 6-24 m/min. Control K2 Basic 7"-Touch KUPER SWT XL-5 AUTOMATIC PLANER AND MOULDER ----- LIKE NEW, showroom machine ! - 5 spindles: bottom, right, left, top, bottom - Speed: frequency-controlled 4,000 - 6,000 rpm - Width and height motor-controlled: left spindle radial upper spindle axial - Feed carriage motorized adjustment TECHNICAL DATA in Detail ----- Working width (for tool diameter 125-163 mm): 15-230 mm Working height (for tool diameter 125 mm): 10-160 mm (Tool diameter up to 163 mm): 10-160 mm Min. workpiece length: single piece: min. 800 mm piece by piece: min. 300 mm The processing of the work pieces is depending on the following operating parameters: material, wood moisture, tools, diameter of the chip removal and feed speed. If necessary adjustments to the operating parameter have to be done. SPINDLE CONFIGURATION ----- bottom, right, left, top, bottom 1st spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 250 mm Usabale length for tools Spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 125 - 160 mm Reference cutter Diameter difference 20 - 25mm to the cutterhead Connecting piece D = 125 mm Quick action lock nut Pro-Lock 2nd spindle: VERTICAL, RIGHT ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 165 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Adjustment path axial 60 mm Adjustable table plate to tool radius Standard profile depth 20 mm Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 3rd spindle: VERTICAL, LEFT ----- Siemens IE3 motor with inverter brake 7,5 kW (10 HP) Diameter 40 mm Spindle length 165 mm Usable length for tools spindle length minus approx. 6 mm Kedpjwgwmhsfx Affenf Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Adjustment path axial 60 mm Standard profile depth 20 mm Adjustable table plate to tool radius Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 4th spindle: HORIZONTAL, TOP ----- Siemens IE3 motor with inverter brake 7,5 kW (10 HP) Diameter 40 mm Spindle length 235 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Pressure shoe pneumatically, via linear guides dynamically adjustable Standard profile depth 20 mm Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 5th spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 235 mm Usable length for tools spindle lenght minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Adjustment range axial 20 mm Connecting piece D = 125 mm Aspiration individ...

Condition: used, This listing is for a Agilent BioTek 405TS Microplate Washer. The unit is in full working condition and is ready for immediate release. Supplied with: (2) 4 Litre waste bottles Microplate Holder The BioTek 405TS Microplate Washer 405TSRSQ is a top-tier instrument designed to streamline the washing process for various assay types, particularly in cell-based assays, microsphere assays, and ELISA applications. Here’s a detailed overview of its key features and specifications: Key Features: Patented Verify Technology: This innovative feature automatically checks for any blockages in the manifold tubes before initiating a wash cycle, ensuring that each wash is effective and reliable, minimizing the risk of failed assays. Ultrasonic Advantage: This functionality automatically cleans any blocked manifold tubes, helping to prevent clogging and ensuring consistent performance across multiple wash cycles. High-Resolution Touch Screen User Interface: The intuitive interface allows for easy setup and control of washing processes for both 96- and 384-well microplates, enhancing usability and flexibility. Dual-Action Manifold: This feature enables independent control and positioning of the aspirate and dispense sections, allowing for precise liquid handling and optimized washing techniques. Optimized Cell Washing: Designed for gentle washing of loosely adherent monolayers, the washer operates at low flow rates with angled dispensing to protect delicate cell structures during the wash process. Biomagnetic Separation and Vacuum Filtration: These optional enhancements provide advanced washing capabilities, expanding the versatility of the instrument for various applications. Specifications: Wash Volume: Configurable from 25 to 3000 μL per well, accommodating a wide range of assay requirements. Microplate Types: Compatible with 96- and 384-well plates, including both low profile and standard height, as well as solid and filter bottom options. Kodpfx Afoxxx H Dsfjnf Fluid Pump Type: Utilizes a diaphragm pump, ensuring consistent fluid delivery and performance. Instrument Control: Managed through a local touch-screen computer software interface, simplifying operation and customization of wash protocols. Number of Reagents: Capable of handling 1 to 4 reagents, allowing for complex washing and assay procedures.

Year of construction: 2006, condition: as good as new (ex-display), machine/vehicle number: 4014, Mineralization system ASTORI - DIGI-6, KJELDAHL, model Digestor 67185 Description: The DIGI-6 Kjeldahl Digestion System allows the parallel digestion of up to 6 samples at the same time. Its strong and space-saving structure was studied to provide excellent heating efficiency and insulation. As a consequence, power consumption is reduced dramatically, meanwhile ensuring an optimized digestion procedure. The temperature is controlled by a digital thermal regulator: the selected value is kept with a surprising level of accuracy and precision; furthermore, the digital controller includes an over-temperature protection system. The provided rack allows quick handling of all digestion tubes, with its easy positioning and removal thanks to the practical lateral handles. The acid fumes are fully gathered by the glass caps and the acid-proof tubes, placed on the upper part of the equipment. The fumes are efficiently conveyed to the favourite fumes removing systems, such as a water jet pump or a scrubber: thus, the operator can choose to work outside the aspirating hood by easily connecting the DIGI-6 Kjeldahl Digestion System to an optional scrubber unit. The equipment can be used with up to 6 standard digestion tubes with 250 ml capacity, each. Upon request, a version for "Buchi" digestion tubes can be manufactured. Advantages and technical features : - 6-place heater - External structure in stainless steel - Digital temperature controller - Temperature setting from room values up to 450°C - Over-temperature protection Ksdjfimhxepfx Affonf - Designed for the maximum operator"s safety - High heating efficiency and excellent insulation - Traditional 250 ml digestion tubes can be used - Supplied with a fumes gathering system - Easily connectable to a scrubber unit - Rack for the quick and easy handling of tubes (the tubes should be ordered separately) - Power Supply: 220 Volts/50 Hz - Absorption: 1000W • For Romanian companies, there is the possibility of selling in instalments. Price Euro 1.990 + VAT, Ex Works Loaded of FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale /Ne rezervăm dreptul la greșeli, modificări și vânzare. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, This listing is for the Churwell PBI air sampler SAS Super with case and charger The unit is in full working condition and is ready for immediate use Churwell PBI Air Sampler SAS Super 100 L with Case and Charger The Churwell PBI Air Sampler SAS Super 100 is a widely used microbiological air sampling device designed for cleanrooms, pharmaceutical environments, operating theatres, and laboratories. It enables reliable air monitoring by collecting air-borne microorganisms onto contact plates or Petri dishes. Key Features: Sampling Principle: Designed to collect airborne microorganisms on microbiological agar by impaction, produced through controlled air aspiration. High Sampling Efficiency: The SAS Super models—such as the SAS Super 100 and SAS Super 180—can collect particles down to 1 micron. The SAS Super 100 offers a sampling rate of 100 liters of air per minute. Digital Control: Features a digital interface for setting sampling volume, duration, and storing operator information. Battery-Powered: Equipped with a rechargeable battery, allowing for multiple sampling sessions on a single charge. Comes with a charger included. Portability: Lightweight and easy to carry with a protective case, ideal for field use or portable cleanroom monitoring. Technical Specifications: Air Flow Rate: 100 liters per minute Dimensions: 10.5 × 11 × 29 cm Weight: 1.75 kg Data Management: Some models support data logging and CFR 21 Part 11 compliance (varies by version) Kjdpfxoxv Dpxe Affonf Materials: Typically stainless steel or autoclavable materials for sterile environments Accessories and Options: Aspirating heads (stainless steel or disposable) Tripods and stands Calibration adapters USB data cable (for models with digital logging)

Condition: used, This listing is for the Eppendorf xplorer plus electronic pipette The unit is in full working condition and is ready for immediate use Eppendorf Xplorer™ Plus Electronic Pipette – Single Channel The Eppendorf Xplorer™ Plus is an advanced electronic pipette designed for simplicity, precision, and reproducibility. This innovative pipette facilitates a wide range of intelligent applications such as aspirating, diluting, sequential dispensing, and reverse pipetting, ensuring enhanced productivity and flexibility in the laboratory. It helps eliminate delays caused by complicated programming or inflexible processes, allowing for more efficient workflows. Key Features: Multifunctional Rocker: The “Up is up and down is down™” principle for intuitive operation, along with easy function selection via the practical selection dial. Intuitive Interface: Operate in your preferred language with a clearly arranged color display and no sub-menus. The integrated help function ensures that guidance is always available when needed. Innovative Rocker: When the tip is ejected, the piston automatically returns to its zero position, ensuring smooth operations. ON/OFF Switch: The pipette automatically switches off during longer periods of inactivity to preserve battery life. Advanced Applications: Additional functions such as aspirating, diluting, sequential dispensing, and reverse pipetting enable more complex processes with ease. One-Time Programming: Save your programming sequences for faster handling of complex pipetting tasks. Fixed Volume Settings: You can save your desired volume settings for quicker access during repetitive tasks. Kodpfxjxv Di Se Affsnf Password Protection: Secure your pipette settings with password protection to prevent unauthorized changes. Individual Speed Settings: Adjust the speed parameters to your individual working pace. Maintenance Reminder: Set reminders for pipette maintenance based on time or frequency of use. Reproducibility: Consistently reproducible results with volume and speed adjustments that remain precise and reliable. Ergonomic Design: PhysioCare Concept™ reduces weight and improves balance, offering an optimally angled pipette head for better comfort and ergonomics. Spring-loaded tip cone ensures a secure fit, providing maximum tightness. Clear Display: The high-resolution color display enhances visibility, ensuring that parameters are clearly visible at all times. Applications: Pipetting: Liquids (manual and automatic) Dispensing: Timed and manual dispensing Pipetting and Mixing: Ensures thorough mixing of liquids in addition to accurate pipetting

Condition: used, This listing is for the Rainin E4 XLS Electronic Single Channel Pipette The unit is in full working condition and is ready for immediate use Knjdpfxoxhf E Se Affsf Large color screen with 360° trackball/joystick and carousel menu for easy navigation Multiple pipetting modes: Standard: e.g., basic, multidispense, mix Advanced: titration, dilution, fixed‑volume, reverse pipetting True Manual mode: real‑time control over aspiration/dispense speed Independently adjustable speeds for aspirate, dispense, and mix RFID-enabled for tracking service info, calibration, and protocols (supports GLP/GMP)

Condition: used, This listing is for 1 of 2 Hamilton Microlab 600 series dual syringe dispenser The units are in full working condition and is ready for immediate use Knodpfx Aexhfztoffsf General Description The Hamilton Microlab 600 Series Dual Syringe Dispenser is a semi-automated liquid handling system designed for laboratories requiring high-precision, high-accuracy fluid transfers. Built on Hamilton’s world-renowned syringe technology, it leverages positive-displacement mechanics to ensure consistent performance across a broad range of fluid viscosities and characteristics. Semi-Automated Liquid Handling With a simple touch of the hand probe button or an optional foot switch, users can actuate the dual precision syringe drives to aspirate or dispense exact fluid volumes. This ergonomic control reduces hand fatigue and enhances repeatability in routine workflows. Precision by Design Microlab 600 diluters and dispensers achieve precise and reproducible results through positive-displacement syringe drives that are independent of fluid viscosity, vapor pressure, or temperature. This makes the instrument highly suitable for complex or sensitive fluid-handling tasks such as: Serial dilutions Titrations Standard preparations Reagent distribution Sample aliquoting