Used Arc Welder for sale (953)

Condition: used, Inverter Welding Machine for Manual Metal Arc Welding TECHNOLIT PROFImat 170 Plus Type MMA Welding Machine, Inverter Welding Machine, Manual Electrode Welding Inverter New – unused Pgodpfxji E Iz Is Ahyjk Serial No.: TB1703500316 Article No.: 440030 Year of Manufacture: 2022 TIG (DC) Output: 170 Amp. 45% duty cycle 150 Amp. 60% duty cycle 135 Amp. 100% duty cycle MMA Output: 170 Amp. 35% duty cycle 145 Amp. 60% duty cycle 125 Amp. 100% duty cycle Adjustment Range: 5–170 Amp. infinitely variable Power Supply: 230 Volt, 50 Hz - Hot start function (optimizes ignition characteristics, making it easier to start welding with difficult-to-ignite electrodes) - Anti-stick function (optimizes electrode control and prevents the electrode from sticking) - Arc-force function (optimizes arc stability and improves penetration) - Lift-arc arc ignition - Suitable for stick electrode welding, for all electrode types up to Ø 4 mm - Ground cable with plug connection - Electrode holder with 3-meter cable and plug connection - Equipped with 230-volt Schuko plug - S-mark for welding under increased electrical hazard conditions - Overvoltage protection Dimensions (machine without cables) L x W x H: 310 x 155 x 265 mm Weight (without cables): 7 kg NEW – unused, from stock

Condition: used, Inverter welding machine for manual electric welding IMS - GYS type PROGYS FLEX 280A CEL MMA welding machine, inverter welding machine, manual electric welding inverter Serial no. IEC 60974 Year of manufacture 2020 Power with mains operation 400 Volt (40% ED) 280 Amp. Power with mains operation 400 Volt (60% ED) 200 Amp. Power for mains operation 400 Volt (100% ED) 170 Amp. Power for mains operation 230 Volt (40% ED) 200 Amp. Power for mains operation 230 Volt (60% ED) 180 Amp. Power for mains operation 230 Volt (100% ED) 150 Amp. Adjustment range 5-280 Amp. stepless Mains connection 230 / 400 Volt, 50 Hz. - Operating voltage from 110 to 480 volts alternating current Podpfovg Rh Tjx Ahysgk - Adapts fully automatically to the existing mains supply - equipped with 16 Amp. CEE plug for 400 Volt mains voltage - Hot-start function (optimizes the ignition behaviour, simplifies the welding start of electrodes that are difficult to ignite) - Anti-stick function (optimizes electrode guidance and prevents the electrode from sticking) - Arc-Force function (optimizes arc stability and improves penetration) - Digital display - Plug socket for remote control connection - Earth cable with plug connection - Electrode tongs with 3 meter cable and plug connection - Stick electrode welding, can be used for all electrode types up to Ø 5 mm - TIG-DC welding (without TIG hosepack) - The device may be connected to a flexible three-phase power supply between 110 V and 480 V or to a fixed three-phase 400 V power supply (50 - 60 Hz) plus ground wire. This appliance may only be connected to a 3-phase power supply system with 4 conductors, where the neutral conductor is earthed. Dimensions (appliance without cable) L x W x H 470 x 270 x 430 mm Weight (without cable) 23 kg New, unused

Condition: good (used), Year of construction: 1998, machine/vehicle number: 0518018, Offer 24600 Technical data: - suitable for welding steel, aluminum, special metals, Cr Ni, etc. - welding current 450 A 60% ED - 360 A 100% ED - welding current adjustable from 3 A - 450 A - Synergic setting control FRONIUS - water cooling device FRONIUS - separate wire feed case - intermediate package device - wire feed case 14 linear meters Psdpfevncfmsx Ahyegk - 4 rollers wire feed continuously adjustable - MIG - MAG hose package water-cooled approx. 4 linear meters - ground cable - pressure reducer - mobile base frame - connection 400 V / 6.6 A / 8.7 kVA - space requirement approx. W 650 x H 900 + 450 x D 1100 mm - weight approx. 200 kg

Condition: good (used), Year of construction: 1998, machine/vehicle number: 0618012, Offer 24604 Technical data: - suitable for welding steel, aluminum, special metals, Cr Ni, etc. - welding current 450 A 60% ED - 360 A 100% ED - welding current adjustable from 3 A - 450 A - Synergic setting control FRONIUS Pgedpfxevncubs Ahysk - water cooling device FRONIUS - separate wire feed case - intermediate package device - wire feed case 1 linear meter - 4 rollers wire feed continuously adjustable - MIG - MAG hose package water-cooled approx. 4 linear meters - ground cable - pressure reducer - mobile base frame - connection 400 V / 6.6 A / 8.7 kVA space requirement approx. W 650 x H 900 + 450 x D 1100 mm - weight approx. 200 kg

Condition: good (used), Year of construction: 1998, machine/vehicle number: 0618019, Offer 24589 Technical data: - suitable for welding steel, aluminum, special metals, Cr Ni, etc. - welding current 450 A 60% ED - 360 A 100% ED - welding current adjustable from 3 A - 450 A - Synergic setting control FRONIUS - water cooling device FRONIUS - separate wire feed case Pgedpfsvnb Tpjx Ahyjk - intermediate package device - wire feed case 14 linear meters - 4 rollers wire feed continuously adjustable - MIG - MAG hose package water-cooled approx. 4 linear meters - ground cable - pressure reducer - mobile base frame - connection 400 V / 6.6 A / 8.7 kVA - space requirement approx. W 650 x H 900 + 450 x D 1100 mm - weight approx. 200 kg

Condition: used, Year of construction: 2008, machine/vehicle number: 0108.0272, Lg.no. 24189 Technical data: - Welding current 330 A 40% ED - 220 A 100% ED - Welding current adjustable in 4 coarse + 6 fine steps 30 A / 15.5 V - 350 A / 24 V - 4 roller wire feed infinitely variable 1.2 - 18 m/min - 2 cycle + 4 cycle regulation Pgedpfotp Id Usx Ahysk - Hose package approx. 4 running meters - Ground cable - Pressure reducer - Connection 400 V / 50 Hz - Space requirement approx. W 500 x H 1000 x D 1000 mm - Weight approx. 140 kg

Condition: good (used), Year of construction: 1998, machine/vehicle number: 0625004, Offer 24603 Technical data: - suitable for welding steel, aluminum, special metals, Cr Ni, etc. - welding current 450 A 60% ED - 360 A 100% ED - welding current adjustable from 3 A - 450 A - Synergic setting control FRONIUS - water cooling device FRONIUS - separate wire feed case - intermediate package device - wire feed case 10 linear meters - 4 rollers wire feed continuously adjustable - MIG - MAG hose package water-cooled approx. 4 linear meters - ground cable - pressure reducer Podsvncqvjpfx Ahyogk - mobile base frame - connection 400 V / 6.6 A / 8.7 kVA - space requirement approx. W 650 x H 900 + 450 x D 1100 mm - weight approx. 200 kg

Condition: good (used), Year of construction: 2007, machine/vehicle number: 195311, Offer 24601 Pgedpfx Ahjvt Trzjyok Technical data: - Welding current max. 450 A 60% ED - 320 A 100% ED - Welding current adjustable in 3 coarse steps + 12 fine steps - 50 to 450 A - separate wire feed case with intermediate package 1 m - 4 roller wire feed continuously adjustable - 2 cycle + 4 cycle – regulation - Digital volt + amp display - Spot welding - Interval welding - Water-cooled hose package 4 m - Ground cable - Pressure reducer - Connection 400 V / 50 Hz / 63 A - Space requirement approx. W 750 x D 1100 x H 1600 mm - Weight approx. 180 kg

Condition: good (used), Year of construction: 2002, machine/vehicle number: 989108 L, Offer 24191 Technical data: - Welding current max 250 A 30% ED - 180 A 60% ED - 140 A 100% ED - Welding current adjustable in 8 stages - 30 A / 15 V - 300 A / 30 V - 4 roller wire feed infinitely variable - 2 cycle + 4 cycle regulation - Weld seam length - time adjustment - Air-cooled hosepack approx. 3 running meters - ground cable Psdotvfpkopfx Ahyegk - Pressure reducer - 400 V connection - Space requirement approx. W 550 x H 1090 x D 950 mm - Weight approx. 140 kg

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: three-phase, warranty duration: 24 months, type of cooling: water, welding current at 60% duty cycle: 350 A, welding current at 100% duty cycle: 300 A, welding current (min.): 20 A, welding current (max.): 350 A, For sale: Kolarc XM350 20-350A 400 Volt +- 10% Water-cooled Pulse Double Pulse XRoot XDeep Position XStabil XCold 406 Fixed programs Program memory 4 Roller drive Pgedpfoxyh Akox Ahyjk New Including 4 Meter PRO5000 MIG/MAG Welding torch, 5 Meter 50mm² earth work lead, gas cable, and interconnection package. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Year of construction: 2023, condition: excellent (used), functionality: fully functional, Number of heating elements: 4 Power (per heater): approx. 10 kW (230 V/400 V) Max. temperature: 700 °C Max. process temperature: 600 °C Thermocouple: Type K Temperature control: PLC software-based regulation Thyristor controller: AEG Thyro 1A-230-60H Cooling (chamber): Consumption 2: (4.0...8.5) m³/h Inlet temperature: (15...18) °C Outlet temperature: (20...28) °C Pressure: (3.5...4.5) bar Water quality: mechanically clean, visually clear pH value (at 20 °C): (6.5...8) Pgsdpfey Htgwjx Ahyok Max. particle size: < 25 μm Water hardness: < 15 °dH Chloride ions: < 80 mg/l Total chloride and sulfate content: < 160 mg/l Cooling (evaporator): Consumption 3: (1.5...2.5) m³/h Inlet temperature: (6...10) °C Outlet temperature: (12...15) °C Pressure: (3.5...4.5) bar Water quality: mechanically clean, visually clear pH value (at 20 °C): (6.5...8) Max. particle size: < 25 μm Water hardness: < 15 °dH Chloride ions: < 80 mg/l Total chloride and sulfate content: < 160 mg/l

Year of construction: 1985, condition: used, machine/vehicle number: 60802 A 17983 J, cutting circuit: bis 400 A space needed: 820 x 1220 x 930 mm weight: 750 kg Pgedpfxs Sdrfj Ahyjk

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, overall weight: 330 kg, load capacity: 6 kg, arm reach: 1,373 mm, controller manufacturer: Fanuc, controller model: R-J3IB Mate, teach pendant manufacturer: Fanuc, input voltage: 400 V, type of input current: three-phase, repeat accuracy: 0.08 mm, industrial robot 6 axis FANUC Arc Mate 100i Be 6kg load capacity loading or welding robot for sale Robot FANUC Arc Mate 100iBe Robot Model A05B-1215-B651 year of manufacture: 2008 Axis: 6 Load capacity: 6 kg Reach: 1373 mm Repeatability: ±0.08 mm Robot weight: 238 kg Structure: Articulated Mounting: Floor Controller: R-J3IB Mate Control cabinet: AO5B-2445-B200 Electric power: 3kw 50 Hz 380v year of manufacture: 2008/06 Weight: 100kg Podpoyf Ha Tsfx Ahyegk

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: 1270, overall weight: 280 kg, table length: 457 mm, table width: 660 mm, Electro-Discharge Drilling Machine (Disintegrator) ELECTRO ARC 2-DBQT FOR SPARK ERODING BROKEN DRILLS AND TAPS Ideal for quickly and cleanly removing broken taps, drills, studs, and screws with precision, while leaving the surrounding material intact. - Year of manufacture: 1999 - For taps M1.6 to M38 - For drills Ø1 to Ø38 - 1x collet Ø4 mm Podpfx Ahsymw Spsyegk - 1x collet Ø4.5 mm - 1x collet Ø5 mm - 2x collets Ø6 mm - 380 V - 10 kVA - 15 A - 50 Hz - Serial No.: 1270 Free loaded onto truck

Condition: excellent (used), 1) Main Welding Station – ACR6-P Type: Rotary welding station for narrow groove (Narrow Gap) Axes: 4-axis rotary system Control: Beckhoff CNC / HMI Weld monitoring: Stenning Video Weld Monitor System Approximate footprint: approx. 10,000 mm × 6,500 mm 2) Welder / Power Source Miller XMT 456 CC/CV — backup unit Type: CC/CV welding power source (MMA / MIG / FCAW / TIG – depending on equipment) Type: Multiprocessing Power supply: 400 V (via attached transformer) 3) Power Transformer Voltage: 400 V Dimensions: 970 × 760 × 1,200 mm (H) Application: powering machines in the welding station 4) Power Sockets Quantity: 3 × 415 V Pgodpfex Upf Sox Ahyjk Mounting: on aluminium frame 5) Welding Lathe Dimensions: 3,000 mm × 1,200 mm × 780 mm (H) Purpose: rotary positioning of workpieces for circumferential/narrow gap welding 6) Heavy Duty Work Table Dimensions: 900 mm × 600 mm × 600 mm (H) Design: robust, industrial-grade 7) Curtains and Guarding System Welding curtains: included KEMPER system: adjustable, 50 kg, wide range of adjustment

Year of construction: 1985, condition: repair required (used), Extraction machine for taps -Handover in the current condition as seen -Current consumption: too high, machine as spare parts carrier -Manufacturer: Electro ARC, extraction machine for taps or similar tools -Clamping table: 660 x 460 mm -Outreach: 250 to 480 mm -Columns Ø: 70 mm -Dimensions: 930/780/H2045 mm -Weight: 402 kg Pedpfxoi Huvhs Ahyogk

Condition: good (used), TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine -Manufacturer: Thermal Arc, TIG welding machine, inverter welding machine type LS-300 -Welding power: max. 300 A -ground cable -Dimensions: 410/210/H435 mm -Weight: 21.1 kg Pgsdpfxex Hwcvs Ahysk

Condition: excellent (used), Ultrasonic welder, Ultrasonic plastic welder, used machine Pgodpjt H Nhusfx Ahysk Manufacturer : Branson Type :900 AES series actuator Overall dimensions : 1200 x 810 x 2410 mm Machine dimensions : 420 x 700 x 1470 mm Control dimensions : 450 x 450 x 180 mm Weight : 167 kg Frequency : 20 KHZ Power : 1000 W Maximum stroke length : 100 mm

Condition: excellent (used), Year of construction: 2019, Cell with FANUC Arc Mate 100iD welding robot Year of production: 2019 Axes: 6 Reach: 1441 mm Load: 12 kg Fanuc System R-30iB Plus robot controller and 2 m x 2 m x 2.7 m housing (without Kemper extraction system) Podpfx Ast Rwwrehysgk

Condition: like new (used), Year of construction: 2017, Complete welding system based on a KUKA KR 16 L8 arc HW industrial robot with KRC4 control and a Fronius CMT welding system. The set is equipped with a KUKA KP1 positioner and a wire feeder with cooling. All main components are from 2017. Technical data Industrial robot Model: KUKA KR 16 L8 arc HW Article No.: 10023544 Serial No.: 867099 Year of manufacture: 06/2017 Number of axes: 6 Payload: 8 kg Reach: 2015 mm Weight: 240 kg Positioner/rotator Model: KUKA KP1-HC1000R980 Article No.: 16008950 Serial No.: 152228 Year of manufacture: 06/2017 Weight: 850 kg Cooler Model: Fronius FK 4000-R FC Pgsdpfx Aey Hktnshyok Article No.: 4,045,837,632 Serial No.: 28245627 Supply voltage: 400 V Frequency: 50–60 Hz Current: 0.6 A Max pressure: 4 bar (0.4 MPa) Power: 2 kW Protection class: IP23 Wire feeder Model: Fronius VR 7000-CMT 4R/G/W/F++ Article No.: 4,045,963,000 Serial No.: 28245629 Voltage U11: 55 V / 4 A Voltage U12: 24 V / 2 A Wire feed speed: 0.5 – 22 m/min Welding current: – 360 A (100%) – 450 A (60%) Protection class: IP23

Condition: good (used), Year of construction: 1960, functionality: fully functional, type of input current: AC, Melting furnace, 1960 - KF Arc Furnace_AC EAF 8 ton, 4 MW - Nominal capacity 8,0 t, output during production has been 6,0 - 10,0 t - Power transformer 4 MW Karhula Foundry has two molding lines and hand molding for large castings. Our melting capacity consists of 8 ton arc furnace and 8 ton, 1,5 ton and 0,5 ton induction furnaces. We have an 8 ton AOD (Argon Oxygen Decarburization) converter for metal treatment. Pjdpfx Aevampgjhysgk

Condition: excellent (used), Year of construction: 1992, Manufacturer EVG Type TSD 7-25 Machine No. 958 Year of manufacture 1993 Working direction L > R Beam types KT 8… Beam height (mm) 90-250 Carrier length min. (mm) max. (mm) 14,000 Fixed lengths: Yes Cutting pitch (mm) 100/200 Spool unwinder (pcs.) 5 LAR: Yes Psdowp Ilyopfx Ahysgk Wire diameter - 5-12 mm smooth/ribbed Diagonal - 4-7 mm smooth / ribbed Stack height max. (mm) - 500

Condition: excellent (used), Year of construction: 2009, Technical Details : Pgsdpfx Aorn N Efshyjk Year - 2009 Beam welding machine outlet height: 1400mm (UK beam from ground) Min. strap length: 0.8 m Max. beam length: 16.0 m Base width during production: 58 mm (inside diagonals) Finished beam width: 70 – 116 mm (external dimensions of bottom chords) Lattice girder production speed: max. 15 m/min Design of the wire feed speed: 18 m/min (upper and lower belt) 38 m/min (diagonals) Carrier types that can be produced: KT KTS Top belt Ø: 5 – 16 mm 5 – 7 mm Lower belt Ø: 5 – 16 mm 5 – 7 mm Diagonal Ø: 4.5 – 9 mm 5 – 7 mm Height: 70-400mm 80-310mm Division of the diagonal: 190 – 210 mm 200 mm Primary material: Cold or hot rolled reinforcing steel from coil in accordance with EN 10080:2005 in weldable quality, max. carbon content 0.20 % The line is in excellent working condition !

Condition: excellent (used), Year of construction: 2003, working width: 215 mm, welding power (max.): 750 kVA, Complete Mesh welding/Lattice girder factory Factory consists : - Mesh welding line SCHLATTER PG 24 , Semi- automatic , Year - 2002 - Lattice Girder Line SMEI , Full automatic , Year - 2003 - Straightening and cutting machines 1x Wafios R4 2 x VITARI NR16 1X VITARI NR10 - Cold drawing line SMEI , Input wire max.10mm, Speed - 4m/sec. - But welding achine SMEI Pgjdoqy Ek Ajpfx Ahyjk - Wire sharpener SMEI

Condition: excellent (used), Technical Details : Year of manufacture: 1985 (fully electric in 2007, partial in 2010 underwent a mechanical overhaul.) The mesh max. width: 1500 mm Mesh density: 15 welding heads in arbitrary distribution Increment: 20mm – 200mm. Wire thickness: 1.2mm - up to 2.2mm (max 650 N/nmm - We have already welded 2.5mm also wired.) Energy demand: 14 kVA (max) Pgodpfx Aeryv S Uohyjk Weight: approx. 8 tons Drive: digital servo, control (PLC). Stepless regulation.. Accessories: manual