Used Angle Bending Machine for sale (68,566)

Condition: as good as new (ex-display), Year of construction: 2026, sheet width 2050 mm plate thickness 4.5 mm 4.0 mm roll length 2050 mm min. dia. 210 mm roll diam. toproll 140 mm weight 1530 kg range L-W-H 3220 x 1200 x 900 mm Exhibition machine from 2026 With only approx. 2 operating hours Condition like new Special price on request Features: - Robust electromechanical bending machine - 2 central rollers driven by electric motors (top & bottom rollers) - Top roller manually swivels out, with hinged bearing - Includes tapered bending attachment - Freely movable control panel - Bottom roller manually adjustable via handwheel - Asymmetrical roller arrangement Dwodjxaawgjpfx Albob - Self-braking main motor - Safety device (safety tether with switch unit) - CE marking/Declaration of Conformity Optional equipment included in the price: - Hardened rollers - Motorized side roller adjustment - Digital position display for motorized adjustable side roller

Condition: new, tube diameter 33,7 x 3,4 GAS mm tube diameter 35,0 x 2,5 STAHL mm tube diameter 35,0 x 1,5 EDELST mm bending radius min. R10 - R 190 mm bending angle max. 0 - 180 ° tool taper 6-kant 40 mm voltage 230 V total power requirement 0,9 kW weight of the machine ca. 23,0 kg Description: - MediBender "070" digital - with maximum bending performance for 35 x 2.5 mm steel tubes - Excellent bending quality with very tight bending radii . (from 2 x tube diameter) and bending angles between 0° and 180° - Easy to operate - High accuracy and reliability - Fast tool changes (within seconds) Dsdpfx Aljxab E Sebowb - Easy to transport - Huge selection of affordable standard tools (metric, gas inch, inch) BENDING SEGMENT AVAILABLE FOR AN ADDITIONAL CHARGE

Condition: as good as new (ex-display), Year of construction: 2025, tube diameter 10.0 - 42.0 mm Stahl wall strength 3.0 mm Stahl tube diameter 54.0 mm CU/Alu bar material - diameter 30.0 mm wall strength 2.0 mm revolutions per minute 1.30 U/min voltage 400 Volt total power requirement 1.5 kW weight 110 kg range L-W-H 400 x 450 x 570 mm Exhibition machine - like new never been used (!!) Special price upon request Dwsdpfx Aoxab Hvslbeb - Steel tube capacity: 42.0 x 3.56 mm - Gas tube capacity: 1" 1/4" Gas x 3.5 mm - Square profile capacity (FE 42) 40 x 20 x 2.6 mm - Max. bending radius: 200 mm - Minimum radius: 2 x D - Hexagonal tool holder - Min. outer diameter: 5 mm - 1/8" Gas Features: - Patented quick tool change system - One bending speed - Digital machine display - 1x freely movable foot switch - 1x bending tool set included * Additional segments available upon request for an additional charge * ERCOLINA tool holder

Condition: as good as new (ex-display), Year of construction: 2026, tube diameter 10.0 - 60.0 mm Stahl wall strength 3.0 mm Stahl tube diameter 64.0 mm CU/Alu wall strength 4.0 mm revolutions per minute 1.25 - 2.50 U/min bar material - diameter 35.0 mm voltage 400 Volt Control ISITAN NC total power requirement 2.0 kW weight 140 kg range L-W-H 380 x 900 x 600 mm Dedpfx Aoxabu Helbowb Exhibition machine - like new never been used (!!) Special price upon request - Steel tube capacity: 60.0 x 3.0 mm - Gas tube capacity: 2" Gas x 3.91 mm - Square profile capacity (FE 42) 60 x 30 x 4.0 mm - Max. bending radius: 200 mm - Minimum radius: 2 x D - Hexagonal tool holder - Min. outer diameter: 5 mm - 1/8" Gas Equipment: - ISITAN NC digital control unit * Control panel = touchscreen * 20 sets with 200 programs each - Patented quick tool change system - Continuously adjustable bending speed - One bending speed - 1 free-floating foot switch - 1 bending tool set included * Additional segments available upon request for an additional charge * ERCOLINA tool holder

Condition: used, Year of construction: 2002, sheet width 3050 mm plate thickness 3.0 mm ST pre-bending capacity 3.0 mm ST upper roll diameter 170 mm lower roll diameter 170 mm side roll diameter 180 mm Control konv. 0 380 V total power requirement 3.0 KW weight 4250 kg In good condition Dsdpfjxacfgsx Albewb With new rubber-coated top roll (!!) Also suitable for bending non-ferrous metals - in checked conditions - machinevideo - ?v=ZW8Us6Hbm3E Equipment: - Electro-hydraulic 3-roll bending machine - Asymmetrical roll arrangement - Electro-motor-driven side roll adjustment * Including digital position display - Manual bottom roll adjustment * Via hand crank - Including conical bending device * Inclined bottom roll and side rolls * Parallel alignment in any side roll position - Hardened rolls SAE 1050 CK 45 - Manual folding storage for removing closed pipes * Top roll must be raised before opening the storage (e.g., forklift/crane) - Safety device - Connection cable + connector - 4-way foot switch * 2 buttons for side roll movement (up/down) * 2 buttons for roll movement (left/right) * With 4x new foot switch covers - Operating instructions (English) * Special accessories included: - Brand new top roller with plastic/rubber coating * Suitable for bending non-ferrous metals * Such as copper and aluminum

Condition: new, pressure 80.0 t stroke 285 mm flat steel 300 x 25 mm working feed 10.0 mm/sec return speed 10.0 mm/min work height max. 930 mm table: 750 x 1425 mm total power requirement 10.0 kW motor 400 Volt 50 Hz oil volume 120 l weight 1700 kg range L-W-H 1500 x 750 x 1800 mm Features: - Electro-hydraulic horizontal bending machine - Large, robust machine table made of hardened steel - Machine made of hardened and ground forged steel - Digital display for stroke setting Dwsdexabhaspfx Albjb * Programming of 1x bending end point & 1x return point possible - 1x tool set (1x bending punch / 1x 1V die) * Bending punch .. degree: 60° / bending radius: 5.0 mm * Die .. degree: 85° / V opening: 100.0 mm - Infinitely variable adjustment of bending speed & pressing force - 1x manual material stop - Freely movable double foot switch - Machine can be moved with a pallet truck/forklift - Operating instructions

Condition: new, sheet width 1550 mm plate thickness 4.5 mm pre-bending 4.0 mm roll length 1550 mm min. dia. ca. 190 mm roll diam. toproll 140 mm bending speed 3.0 m/min engine output 2.2 kW weight 1420 kg range L-W-H 2700 x 750 x 1000 mm Equipment: - robust electro-mechanical round bending machine - 2x central rollers driven by electric motor (upper & lower roller) - upper roller can be swiveled out manually, with folding bearing - including conical bending device - freely movable control panel - lower roller can be adjusted manually, using a handwheel - asymmetrical roller arrangement - self-braking main motor - safety device (safety line with switch unit) - CE mark/declaration of conformity Dwjdpfx Alezkbn Isbjb Special equipment included in the price: - hardened rollers - motorized side roller adjustment - digital position display for motorized adjustable side roller

Condition: ready for operation (used), Year of construction: 1992, sheet width 2050 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST Dwedsxacdvepfx Albob diameter of upper rolls ~ 205 mm side roll diameter ~ 195 mm Control konv. oil volume 80.0 Liter voltage 380 V total power requirement 5.5 kW weight 3200 kg range L-W-H 4500 x 1500 x 1300 mm Features: - Robust electro-hydraulic 3-roll bending machine - 3-roll concept offers a wide range of bending and rounding options - Pivoting control unit at the front * Operation - Control of all rolls and machine axes * Digital position display * Manual operation via joysticks - Diameters of up to 1.1 times the top roll diameter are possible - Forged and hardened rolls with a hardness of 53-55 HRC - Low-maintenance, stable machine design - Sturdy welded steel construction - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge / pressure indicator for the rolls - Safety device (safety lanyard with switch unit) - Operating instructions (PDF)

Condition: used, functionality: fully functional, Hydraulic mandrel tube bending machine Complete bending sets with bending mandrels and bending shoes: Ø 18, 20, 22, 25, 2 x 30 + 35 mm Additional bending mandrels, but without bending shoes: Ø 28, 2 x 38 + 42 mm Pre-assembly device with hydraulic cylinder Hydraulically driven deburring unit for tubes, inside and outside, from 6 - 48.3 mm Dwedpfx Aljwnrt Sobsb Max. tube feed length: 3000 mm Machine weight: approx. 700 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel / Germany

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, control type: CNC control, degree of automation: automatic, Fully automatic swivel bending machine with warehouse integration Manufacturer: TRUMPF Model: TruBend Center 7030 (B34) Year of manufacture: 2022 Control: TecZone Fold programming, touch operation, additional screen TECHNICAL DATA: Max. bending length: 3,123 mm Min. bending length: 200 mm Max. box height: 220 mm Max. component size: 3,120 x 1,500 mm Max. diagonal of component: 3,460 mm Max. material thickness: Steel: 3 mm, Stainless steel: 2.2 mm, Aluminium: 4 mm Min. material thickness: 0.4 mm Min. bending depth (standard tool): 145 mm Min. bending depth (retractable hold-down tool): 30 mm Connected load: 80 kVA Average power consumption: 15 kW Space requirement (L x W x H): 8,348 x 5,113 x 3,345 mm (min. hall height: 4,300 mm) Dwodpox Tii Ijfx Albeb EQUIPMENT: - Front gauge - Loading grippers - Rotating part manipulator - 2-axis part manipulator with vacuum modules - 5-axis backgauge - Optical angle assistant - Hold-down tools - ToolMaster - Control unit with foot switch - ACB Laser (Automatically Controlled Bending) - 3-surface vacuum module set - 2-surface magnet module set - Bending tools OBW90 and UBW90 - Retractable hold-down tool ENW - Additional bending tool function ZBW Comprehensive set of various tools included AUTOMATION: - Robot and warehouse interface (use without warehouse requires adaptation) - Loading and unloading unit with warehouse integration (without pallet), including for blank separation - Safety fence, swing doors, light barriers - Unloading table with conveyor system Further information available in the pictures. This used machine can be inspected under production conditions. All information is without guarantee – sale excludes any warranties or guarantees. Subject to prior sale.

Condition: used, Year of construction: 1990, machine/vehicle number: 98 / 1, Item No. 26247 Technical Data: Dwjdpfxezzzhcs Albsb - max. working width 2040 mm - max. material thickness at 40 kp/mm² tensile strength 3.5 mm - bending angle adjustment, electronically pre-selectable, 0 - 135° - smallest bending radius 1.25 x sheet thickness - smallest inner flange height 6 x sheet thickness - automatic sequential control for a complete work cycle - operation via hand or foot buttons - largest opening width / stroke of the upper beam 200 mm - height adjustment: - of the upper beam 80 mm - of the lower beam 80 mm - upper beam drive 400 V / 1.1 kW - bending beam drive 400 V / 1.5 kW - manual rear stop, operable from the front - various bending strips, split gooseneck tool (incomplete) - space requirement approx. W 3300 x H 1350 x D 1500 mm - weight approx. 2600 kg

Condition: new, Year of construction: 2026, operating hours: 50 h, functionality: fully functional, machine/vehicle number: HorizOne50_4, overall weight: 1,500 kg, tool height: 300 mm, operating speed: 10 mm/s, total length: 1,850 mm, total height: 1,250 mm, total width: 850 mm, reverse speed: 40 mm/s, working height: 1,000 mm, table width: 1,000 mm, table length: 1,000 mm, table height: 1,000 mm, stroke length: 250 mm, pressing force: 50 t, length stop: 1,000 mm, working width: 300 mm, lifting speed: 10 mm/s, bending force (max.): 50 t, warranty duration: 36 months, Electric horizontal bending machine HorizOne 50 with spindle drive from CoastOne in Finland. Djdpfezyl Hmex Albowb 500kN pressing force thanks to precise and low-maintenance spindle drive with servo motor and servo controller. Simple, intuitive programming with the proven CoastOne TC12-2D control system. Automatically controlled side stop for convenient processing of your sheet metal parts from individual part production to series production.

Condition: new, Year of construction: 2026, machine/vehicle number: 302340, Profile Bending machine KB Türkei model MB 30 Djdpfxjd S Uf Se Albswb bottom shaft 30 mm top shaft 35 mm two rollers driven with basement capacity: up to round tube 48 x 3,0 mm flat material 50x10 mm square tube 40x40x3,0 mm weight 170 kg motor 0,75 kw 400 Volt 50 Hz 3 ph.

Condition: new, Year of construction: 2026, Ring Rolling machine ZOPF - model ZB 30/3 H (without basement) Dsdpfxjgh T Ias Albswb TECHNICAL SPECIFICATIONS: - three driven shafts, smooth surface - hydraulic adjusting of the center roller - working position horizontal and vertical - digital readout programmable - shafts are supported by conical bearings - slide bars on the slide-support are exchangeable - shaft diameter: 20 mm - roller diameter: 76-86 mm - shaft rpm: 11 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 0,18 kW - hydraulic motor 0,55 kw - adjusting way: 35 mm - weight: 110 kg - dimensions: 530x420x500 mm

Condition: new, Year of construction: 2026, functionality: fully functional, Servo PANEL BENDER FBC 2520 CNC sheet metal bending machines are characterized by their high flexibility, efficiency, precision, and a high degree of automation. They are suitable for processing housings, doors, and other components. They are widely used in industries such as kitchen appliances, control cabinets, power electronics, elevators, etc. Technical data: - automatic tool change - bending length: 2500mm - maximum sheet width: 1500mm - max. diagonal length: 2800mm - max. bending height: 200mm - max. material thickness: stainless steel 1.2mm / aluminum 3mm / structural steel 2mm - min. sheet thickness: 0.35mm - possible angles: 0°-180° - inner radius: 0.8-1.2 - Dimensions: 5.4m x 4m x 2.9m - Weight: 19500kg - Control: Beckhoff This machine will be exhibited at Euroblech 2026 in Hanover and will be available from October. We have been distributing YAWEI machines throughout Europe for more than 20 years. Service and spare parts supply are provided by H+S, all from a single source. Dwedozyadyjpfx Albsb

Condition: excellent (used), Year of construction: 2008, very well-maintained bending machine max. bending length 4.1 m Dwjdpfszzrikox Albeb max. sheet thickness 1.25 mm with shear, electrically driven with feed mechanism

Condition: used, Year of construction: 1980, total length: 1,500 mm, total width: 1,400 mm, total height: 1,400 mm, Colour: Green Empty weight: 2.500 kg Price: On request - Year: 1980 - Documentation available: No - CE certificate present: No - Serial number: 802315 - Drive system: Conventional - Drive: Hydraulic - Vertical/Horizontal: Horizontal and vertical - Number of rolls [pcs.]: 3 - Number of driven rolls [pcs]: 2 - Power [kW]: 5.5 - Shaft diameter [mm]: 105 - Moment of resistance [cm³]: 30 - Top roll diameter [mm]: 275 - Bottom roll diameter [mm]: 275 - Capacity diameter round [mm]: 60 - Options: Extra rolls - Transport dimensions: 1500mm x 1400mm x 1400mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Dwedpfxezx Undo Albjb VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: as good as new (ex-display), Year of construction: 2026, Hydraulic horizontal bending machine - Model T 200 with stop - feeding machine Dsdpfjzzk D Tox Albjwb - stroke length 185 mm - Weight 500 kg Bending capacity up to flat bars ST 37 is 200x12 mm (with appropriate tool) with punch R 5 and die V 100 mm

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 200713, total width: 950 mm, total length: 1,050 mm, total height: 890 mm, type of input current: three-phase, input voltage: 400 V, overall weight: 585 kg, oil tank capacity: 13 l, rotational speed (max.): 6 rpm, Electric bending machine P54 Evo Bending machine for concrete reinforcing rebar, studied for high volumes of production. Bending capacity: - 1 rod Ø44 mm (1.73 in) / res. 65 kg/mm² - 1 rod Ø40 mm (1.57 in) / res. 85 kg/mm² Engine 4 kW (5,5 CP), power 400 V (three-phase) Dimensions: cm 105 x 95 x h. 89 Net weight: kg. 585 Operation electric Product handled: concrete reinforcement Displacement: horizontal Bending capacity: Min.: 2 mm; Max.: 44 mm Dwodpozgv Hdefx Albjb RPM 6Two reversal pins, to be positioned on the circumference of the plate to determine the angle of bending; A set of Allen keys, for ordinary maintenance; An electrical pedal, to facilitate the work to the operator permitting him to keep his hands free and work from all sides of the machine; A set of wheels, for the machine handling; An industrial plug, that guarantees the electrical connection; Two mushroom button switches, to immediately stop the machine in case of emergency. They are positioned on two opposite sides of the machine;Standardly mounted on all Evo rebar bending machines, long saddles – with max. 10 holes – are indispensable to realize the double bending. Price Euro 3.660 Euro + VAT, negotiable, ExWorks Oradea, Romania. Please make an offer. Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale /

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 5100 € 98.43 € 1050 mm 2 mm 75 mm 1.5 kW 1610 mm 700 mm 1160 mm 385 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by ratchet lever longitudinal grooves in lower and lateral roll tiltable upper roll right / left rotation with double foot switch user manual in GERMAN or ENGLISH OPTION (PRICE ON REQUEST): hardened rolls Dwsdpfxjy Dvlks Albjb

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 5700 € 110.01 € 1550 mm 1 mm 68 mm 1.5 kW 2110 mm 700 mm 1160 mm 400 kg Dwsdpfx Alszx Hcgjbob 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by ratchet lever longitudinal grooves in lower and lateral roll tiltable upper roll right / left rotation with double foot switch user manual in GERMAN or ENGLISH OPTION (PRICE ON REQUEST): hardened rolls

Condition: excellent (used), Year of construction: 1993, control type: NC control, actuation type: hydraulic, number of rollers: 3, shaft diameter: 120 mm, overall weight: 6,400 kg, total length: 2,900 mm, total width: 2,130 mm, total height: 2,130 mm, Profile bending machine HAEUSLER - HPR 13 MACH-ID 9800 Make: HAEUSLER Type: HPR 13 Year: 1993 Set universal rolls Horizontal and Vertical positioning Hydraulic machine Scales for position side rolls Horizontal and vertical:H + V Shaft Ø: 120mm Number of rolls: 3 Stroke X-Axis: 0 - 300mm Dwodpfozxw E Eox Albob Capacity flat: 130 x 20mm Capacity Tube: 114,3Ø x mm Capacity bar: 70 x 70mm Working speed: 0 - 5000mm/min. Length: 2900mm Width: 2130mm Height: 2130mm Weight: 6400kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2004, sheet width 1550 mm plate thickness 6 mm diameter of upper rolls 228 mm drive elektronisch zwei angetri Dedpfx Alszxt Txsbewb

Condition: excellent (used), Year of manufacture: 2001 Maximum pipe diameter: 60 mm Maximum bending radius: 30–150 mm Maximum wall thickness: 5.5 mm Power: 27 kW Dwedpfx Aozxq Rhjlbsb Control system: CNC Serial number: 2001-0320

Condition: used, Year of construction: 2021, controller model: , _____ Description: Year of manuf. : 2021 TruBend Center 5030 :- Robust machine frame : - Angular direct drive :- Crowning system :- Machine control with touchscreen operation :- TecZone Fold programming – floating licence :- 2-axis part manipulator with suction modules :- 5-axis backgauge Dwedpfxozxkyvo Albsb :- Optical angle assistant :- ToolMaster :- Hold-down tools :- OBW90 and UBW90 bending tools Technical specifications Minimum bending depth (standard tool):145 mm Minimum bending depth (with additional hold-down tool):40 mm Maximum bending length:3,123 mm Minimum bending length:80 mm Hold-down force:101 t Maximum box height:220 mm Minimum material thickness:0.4 mm Maximum steel material thickness:3 mm Maximum stainless steel material thickness:2.2 mm Maximum aluminium material thickness:4 mm Rapid traverse Y-axis (press beam):250 mm/s 5-axis backgauge:1,700 mm/s ToolMaster Bend:2,400 mm/s Dimensions and weight:6,500 x 3,150 x 2,995 mm / 26,000 kg Features :- ACB Laser :- DMC Bluetooth 2D barcode scanner :- Set of 3-surface suction modules (12 pieces) :- Support brackets (2 pieces) :- Additional hold-down tool function (ENW) :- Additional bending tool function (ZBW) :- ENW110-50 – Length 3,123 mm :- ZBW400 – Length 940 mm