Used Analytical Balance for sale (2,594)

Condition: used, This listing is for the Sartorius MCA36201S-2S00-0 Cubis® II High Capacity Balance, 36,200 g x 100 mg The unit is in full working condition and is ready for immediate use The Cubis II line is a modular, high‑performance precision / high‑capacity balance series from Sartorius. This particular model (MCA36201S‑2S00‑0) is designed for applications needing a large weighing range (36.2 kg) with moderate resolution (0.1 g / 100 mg), combined with strong regulatory compliance, flexible hardware/software configuration, and advanced usability features Modular Design: The balance is part of a modular system — you can configure different weighing modules, display/control unit (MCA), draft shields, software application “QApps”, and accessories as needed. Dwedexhdwgjpfx Ab Tsf Auto Leveling: Motorized, automatic level adjustment helps reduce errors related to improper leveling. Environmental Sensors: Includes sensors for climate/environmental monitoring to help ensure stable, accurate operation. Data Integrity & Compliance: The Cubis II MCA models are designed for regulatory compliance (e.g. 21 CFR Part 11, GLP/GMP), with features like audit trails, user management, electronic signatures, and safe data transfer.

Condition: like new (used), Year of construction: 2020, Dosing Unit Movacolor MC Balance MC Liquid Stock No.: 503616 Dwjdpfxew Tayio Ab Tef Machine/Device Type: Dosing unit for powder and liquid Manufacturer: Movacolor Model: MC Balance & MC Liquid Year of manufacture: 2020 Movacolor Powder & Liquid Dosing Unit Consisting of: 2x Movacolor MCTC Touchscreen operator interfaces Movacolor MC Balance powder dosing unit Movacolor MC Liquid gravimetric liquid dosing unit Movacolor MCBC Blindcontroller Movacolor A30 HTC dosing unit Movacolor 12 L hopper The unit was only used once for testing purposes and is therefore as good as new!

Condition: used, Electrodynamic balance shaft balancing machine, vertical balancing machine, balancing machine SCHENCK RoTec Type EBLY Manufacturer No. 1FLY, Year of Manufacture 2000 Workpiece/Test Specimen: Balance shafts Number of measuring planes: 2 Number of balancing planes: 2 Angle of balancing components: 145 - 215° Test specimen weight: max. 10 kg Indicated unbalance: 2 gmm/square Lowest value per scale value: 8 gmm/square Balancing spindle speed: 1200 rpm Scale disc with test specimen holder Ø 320 mm Test specimen diameter max. 400 mm Vibration sensor: P01 force sensor Angle position sensor: HBBC incremental encoder CAB 750 microprocessor measuring device Dwjdpewgnu Njfx Ab Tjf RS232 serial interface Workpiece weight: 2.2 kg Workpiece length: 250 mm Workpiece diameter: 70 mm Power supply: 400 V, 50 Hz Rated current: 16 A - SCHENCK M341 balancing indicator Space requirement: L x W x H: 2000 x 1800 x 2000 mm Weight: 620 kg Good condition

Condition: good (used), Circular vibrating screening plant, screening machine, vibrating screen, vibrating screen, vibration motor, shaker, sorting system, shaking system, sifter, control screening machine, analysis screening machine, test screening machine Dwedpfx Abevmnhws Tef -Manufacturer: Siebtechnik, test sieving machine LAVIB -Type: LAVIB 86 -Dimensions: 490/470/H600 mm -Weight: 66 kg

Condition: new, Balance Systems Digital Interface Balancer 9SHVM2511TD120 Card SNo. 803703, unused, 100% functional, scope of delivery as per photos Dwjdpfx Aboi D T A Ue Tef

Condition: good (used), Sartorious Dwsded Tw Ixspfx Ab Tef Stainless platform scale / balance trolley Stainless mobile platform scale with a Mariotti & Pecini homogenisor attachment

Condition: used, functionality: fully functional, Sartorius LC2200S Balance Max 2000g. Maximum weight 2000g. Dwjdpfx Aboua H E Ae Tjf Good working condition. Please check out our other listings as well.

Condition: used, Precision balance, spring balance, tension force gauge -Manufacturer: Pesola, precision spring balance type Macro-Line 80196 -Measuring range: 200 Newton -Division: 2 N -Dimensions: 400/40/H40 mm Dwsdpfx Abjr H Nlls Tof -Weight: 0.5 kg

Condition: ready for operation (used), Dittel HBA 4000 Hydro-Balance-Automat SN: 344-7998 Part-No.: 812/101B, used, normal signs of use, 100% functional, scope of delivery as per photos Dwsdekak E Aspfx Ab Tsf

Condition: used, functionality: fully functional, Mettler Toledo PM4000 Balance. Readability 0,01g Dedpfjua H Epex Ab Tjwf Update speed 0,13 s Display FD Good working condition. Please check out our other listings as well.

Condition: used, Balance weight, wheel weights, balancing weights -25g Djdpfjb A Tbyjx Ab Tewf -30g -40g -50g -60g -100 g -200 g -Complete sale -Weight: 24kg

Condition: new, Balance Systems 9SHVM2511TD120 card SNo. 803704, unused, 100% functional, scope of delivery as per photos Dwedpfx Abei D T Dcs Tsf

Condition: used, functionality: fully functional, Ohaus ARC120 Adventurer Balance. Max cap: 3100g Readability: 0.01 g Dwedpfx Abeua H Nhe Tsf Good working condition. Please check out our other listings as well.

Condition: used, Line regulating valve, shut-off valve, ball shut-off valve Dedpofyh A Sefx Ab Tjwf -Manufacturer: Flowcon, Automatic Balance Valve, unused in original packaging -Type: F380.0.EBI F360111 -Price: per piece -Number: 2 piece -Dimension box: 185/100/H45 mm -Weight: 0.6 kg/piece

Condition: new, Balance Systems SRL 9SHVM2511TD120 ,unused in opened original box, 100% functional, scope of delivery according to photos Dodpfxoi D T Dko Ab Towf

Condition: used, PANalytical PANalytical X’Pert PRO MPD X-ray Diffractometer (XRD) Excerpt from the service report: Device: PANalytical X’Pert PRO MPD Report date: 07.07.2021 Work performed: - Reinstallation and commissioning of the system - Connection of external supply lines - Warm-up phase - Complete alignment of goniometer and additional components - Maintenance carried out, including replacement of defective parts Spare parts used: L 3.6V NC/U3 R15.0X52.0 BATTERY. NI-CD FAN FOR X-CELERATOR UNIT FILTER, WATER Motor PW3050 ("Device was not tested in-house") The X’Pert PRO MPD is a highly versatile and powerful X-ray diffractometer (XRD) designed for structural characterization of crystalline materials. It is ideal for pure research as well as routine applications in industry and academia. Thanks to its modular design, fast detection, and control of temperature and atmosphere, it is excellently suited for both routine analyses and complex in-situ experiments. Key features: - Multiple measurement geometries possible: - Reflection measurements in Bragg-Brentano (θ–2θ) mode - Transmission geometry for powders in capillaries - Optional SAXS (Small-Angle X-ray Scattering) for nanostructure analysis - Radiation source and detectors: - Typically copper anode (Cu-Kα, λ ≈ 1.54 Å) - X’Celerator detector (1D, ultra-fast) for parallel data acquisition - Modular system with PreFIX technology: - Rapid change of optics and sample stages without recalibration - In-situ measurements at high temperatures: - Measurements up to approx. 1200°C possible - Controlled atmosphere: air, nitrogen, oxygen (limited for reducing atmospheres) Typical applications: - Phase analysis and quantitative Rietveld refinement - Determination of crystallite size, microstrain, residual stress - In-situ investigation of phase transitions, oxidation, crystallization, etc. - SAXS measurements for analysis of nanoparticles and pore structures - Broad range of sample types: powders, thin films, ceramics, pharmaceuticals, catalysts, and more Technical data (typical) Property & Specification Angle range (2θ): approx. 0.5° to 150° Step size: up to 0.002° or finer Goniometer: vertical, 0–0, radius approx. 240 mm Temperature range: room temperature up to approx. 1200°C Atmosphere: air, N₂, O₂ (limited for reducing atmospheres) Detectors: X’Celerator (1D), proportional counter Distribution & application areas: The X’Pert PRO MPD is in use worldwide at, for example: Dodpfxowycatj Ab Tewf - Universities (ETH Zurich, TU Dresden, University of Vienna) - Research institutes (e.g., Max Planck Institutes, ICN2, IS2M) - Industry (e.g., materials development, pharmaceuticals, chemistry) Condition: used Scope of delivery: (See image) (Specifications and technical data subject to change and error!) For further questions, we are happy to assist you by phone.

Condition: good (used), Year of construction: 2005, functionality: fully functional, Offered is a Fein spring balancer, adjustable from 4.5-9kg, with a 2m cable pull and adjustable spring force. Several available, year of manufacture 2005. Further details upon request. Payment in cash or advance payment. Sale only to commercial customers. No warranty, no guarantee. Dwedpfow Tm Rnex Ab Tjf

Condition: ready for operation (used), Elaso EB 5004 Eltrobalance balancing unit with key, without connection cable, serial number: 11-850, used, good condition, 100% functional, scope of delivery as shown in the photos. Dwjdpfxsx Eq I Ns Ab Tjf

Condition: used, machine/vehicle number: 1xxxx, Year of construction: 2012, operating hours: 5,690 h, fuel type: electric, Please contact ATS Norway for more information Please provide reference number upon request: 21064 Specifications: Dsdpfxew Iu Uwj Ab Tswf Model year: 2012 Hours: approx. 5,690 Curb weight: 3,520 kg Max lift height: 300 cm Capacity: 3,000 kg 80V Battery replaced Rearview camera Description:2012 Toyota counterbalance forklift with a 3-ton capacity.Wheels and battery have been replaced.Works as expected and is ready for delivery. Hours: 5690 Own weight: 3520 Lifting heigth: 300 Lifting capacity: 3000 Model: 7FBMF30 Motvektstruck

Condition: used, Year of construction: 2007, Technical data: Cable extension: 2000 mm Lifting height: 2000 mm Load capacity: 22 - 32 kg Weight: 13.5 kg Description: Djdor Dg Hzepfx Ab Tjwf - Secure suspension of device and supply cable - In a “weightless” state - Constant tensile force - Tear-resistant steel cable

Condition: excellent (used), Year of construction: 2014, workpiece weight (max.): 16 kg, input voltage: 230 V, year of last overhaul: 2025, SCHENCK TBsonio High Speed Balancing machine for turbocharger core assemblies Dwodpsq Nin Uofx Ab Tef

Condition: ready for operation (used), Elaso EB 5003 Eltrobalance balancing unit with key, without connection cable, serial number: 11-850, used, in good condition, 100% functional, scope of delivery as per photos. Dwjdpfx Ajx Eq I Asb Tsf

Condition: used, Year of construction: 2021, operating hours: 550 h, fuel type: electric, Please contact ATS Norway for more information Please provide reference number upon request: 21526 Specifications: 2021 model Hours: about 550 (maybe a little more) Certified until 06/2026 Weight: 4630 kg Dwjdpfexm Ticjx Ab Tjf 80V Lifting height of 4.7 m Tires (see pictures) Pallet forks Rotor lamp Delivery by appointment   Description: 2021 Heli CPD25 electric counterbalanced forklift. The truck has a yield of 4.7 meters l fteh. It is certified until June next year. Ready for delivery. Hours: 550 Own weight: 4630 Model: CPD25 elektrisk motvekts truck. 4,7 meter løftehøyde

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, workpiece weight (max.): 10 kg, input voltage: 230 V, year of last overhaul: 2023, SCHENCK Highspeed Special Balancing Machine Type 110 MBRS for turbocharger core assemblies a for service, repair shops as well as research and development departments. The correction of the static unbalance can be performed inside the balancing machine on the compressor wheel side directly on the machine. Max balancing speed 250,000 rpm Dwsdpfx Aboq I Rz Ro Tsf

Condition: used, Electric Forklift JUNGHEINRICH Type EFG-V20 MFGE115-450 DZ Serial No. 89.91.27.26 Year of manufacture: 2000 Rated capacity: 2000 kg Load center: 500 mm Lift height: 4500 mm Fork length: 1130 mm Carriage width: 980 mm Overall height: 2000 mm Operating voltage: 48 Volts - Triplex mast with approx. 1400 mm free lift - Hydraulic side shifter - Battery from year 2020, type 6 PZS 690 (48 Volt / 690 Ah) - 4-wheel solid rubber tires, front 200/50-10, rear 16x6-8 - Power steering - Automatic charger Jungheinrich, Type Timetronic 48 Volt, 80 Amp. Djdpex Dxvcefx Ab Tswf - According to the hour meter, 6718 operating hours recorded - Additional charge for new safety inspection (UVV) = 150 EUR net Length without forks: 2150 mm Overall width: 1130 mm Own weight: approx. 3450 kg Good condition