Used Alden Generators for sale (11,524)

Year of construction: 2022, condition: ready for operation (used), General Data Machine weight 3500 kg Measurements height 2200 mm Dimensions Machine Length 2800 mm This FANUC ROBOCUT α-C600iC was manufactured in 2022. A wire EDM machine designed for precision, it offers reliable performance for intricate metalworking tasks. Consider the opportunity to buy this FANUC ROBOCUT α-C600iC wire edm machine. Contact us for more information. Laodpfx Afsx Nkqfefsk Application Types EDM

Condition: used, (14) Unused Man UPB 12-L-W-E3262E302 CHP cogeneration units with capacity 130kWel and 226 kWTh made in 2022 and designed to be fed by wood gas. Project was dropped so the equipment was never installed or commissioned. Plant includes the following major equipment: - Man 12 cylinder engine rated 273 kW, 50Hz, 1500 RPM - Marelli MBX-E 250 MA4 generator rated 169 kVA, 400V, 50Hz, 1500 RPM Laodpjx Nimlsfx Affek (14) units available.

Condition: excellent (used), Compressed air filter, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter Lajdpspyk Itofx Affsk -Manufacturer: Donaldson, Air filter type SMP 18 1045 Ovp -Number: 8 air filters included -Price: per piece -Packaging dimensions: 265/265/H280 mm -Weight: 1.8 kg/pc.

Condition: good (used), Year of construction: 1994, Machine-Details : Stock-No. 1022-2397 Type of machine Cavity Sinking EDM - Machine Make ZIMMER & KREIM Type PEC 850 Year of manufacture 1994 Type of control CNC Storage location Monheim (Germany) Country of origin Germany Delivery time Immediately Freight basis Ex warehouse, loaded on truck Technical details : table length 840 mm table width 600 mm ampere 60-120 A total power requirement 15-23 kVA weight of the machine ca. 2,75 t Ledpjx Nfzrsfx Affsak dimensions of the machine ca. 2760 x 1110 x 1840 m Additional information : With controlled C-axis and 16-position tool changer. WORKTABLE Table size: 840 x 600 mm Dielectric above table: 360 mm Maximum workpiece weight: 1000 kg T-slots: 4 x 10 mm Distance table to quill without chuck (max / min): 595 / 180 mm WORKHEAD X - Y travel: 565 x 400 mm Z travel: 415 mm X - Y - Z resolution: 0.001 mm C-axis resolution: 0.001 deg. Rapid traverse speed: 800 mm/min Max. electrode weight without rotation: 100 kg Max. electrode weight with rotation: 15 kg DIELECTRIC SUPPLY Tank volume: 400 liters Paper candle filters: 4 pieces GENERATOR Dimensions (height x width x depth): 1800 x 600 x 920 mm Weight: 300 kg Rated current: 60 – 120 A Power rating: 15 – 23 kVA Dimensions (height x width x depth): 2760 x 1110 x 1840 mm Weight: 2750 kg

Condition: not inspected (used), Year of construction: 2010, Articulated telescopic boom lift JLG M 450 AJ Lodpfjtz R Ufjx Affsak Year of construction 2010 approx. 965 operating hours For further details please contact me by phone - Working height 15.72 m - Working range 7.89 m - Articulation point height 7.70 m - Swivelling (not endless rotation) 360° - Platform capacity 230 kg - Platform rotor (hydraulic) 180° - Cage boom - total length 1.24 m - Cage boom - vertical working range 144° (+84°/ -60°) With Kubota diesel for generator operation Actual condition without valid FEM 4.004 (UVV) approval Loading on normal lorry without ramp by forklift no problem The offer is aimed exclusively at traders within the meaning of §14 BGB No sale to private individuals

Condition: excellent (used), Year of construction: 2017, Ref:11050 . 2017 Foliant Vega 400A Laminator. New generation, very compact, single sided thermal laminator designed for heavy-duty digital outputs. Equipped with: Integrated deep pile vacuum feeder and a high-speed bump separator Non-sticky pressure roller and in-run adjustable twin decurl bar and overlap system. Pneumatic high-pressure system (with integrated compressor inside machine frame) Suitable for all jobs – all kinds of digital printed sheets lamination and high volumes of offset printed sheets size B3+ lamination too. The machine maximum speed is up to 18 m/min while performance is over 2100 sheets per hour of B3 portrait (white paper 200 gsm). Feeder: Equipped with a rising pile front separation stream feeder and with a vacuum belt head. Built-in Becker vacuum pump is used for sheets front airing and feeding head vacuum. Overlaps are controlled, in an ‘in-run’ mode. Accuracy is +/- 2 mm under-lap (in a constant speed). Fitted with a lifting plate and its capacity is a 28 cm pile of paper. Laminator: Maximum sheet size is 38 x 66 cm (which is the maximum outputs format from Xerox iGen4). The minimum sheet size is 20 x 30 cm. Compressor is integrated inside the machine frame as standard. Laminating unit is equipped with an adjustable twin decurl unit: • With a decurl blade for offset printed sheets decurling • With a decurl roller for digital printed sheets decurling (to prevent scratches on sheets printed on both sides by digital print with sensitive inks). Roll of a film is mounted on a quick-changed shaft with a film tension control breaker. Shaft capacity is up to 3000 m of the 24 - 42 microns film. Film holder unit is equipped with an in-line trim slitter and a perforating wheel. 2 x laminating rollers - a highly polished chrome roller, and a lower hard rubber pressure roller with non-sticky surface. Pressure is pneumatically adjustable. Laminating roller is heated with a dry electric system inside the roller, with a sensitive temperature sensor. Warming up time is shorter than 10 minutes. Controlled by an interactive, easy understandable icon based touch screen System includes many automation items for an easy control of the machine and a reliable lamination. Separator: Integrated bump separator (sheeter) is equipped with a pair of fast cycling rollers. Separated sheets are delivered into a vibrating jogger Laminating Films: BOPP films (24 – 42 microns) Nylon films (24 - 35 microns) Specification: Maximal Speed: single side 18 m/min. Feeding System: Automatic, vacuum belt, Feeder's Capacity 28 cm Overlaps: In-Run Screw control, Overlaps Accuracy ± 2 mm Paper Weight: 115–500 g/m² Main Roller Pressure System: Pneumatic Minimal Sheets Size (w×l): 20×30 cm Maximal Sheets Size (w×l): 38x66 cm Maximal Performance: 2100 B3 / hod. Lasdpox Nftnofx Affjk Temperature Control: 80–140 °C, Warming Up Time 8 min Power Supply: 230 V AC, 50-60 Hz Power: 3150 W Mechanical Parameters: Floorspace (w×l) 82×198 cm, Weight: 370 kg

Condition: used, machine/vehicle number: XLRAE55GF0L34xxxx, mileage: 131,911 km, Year of construction: 2008, Please contact ATS Norway for more information Please provide reference number upon request: 22095 Specifications: 2008 model Mileage: 131,911 286 hp Automatic transmission Euro 4 Tires (see pictures) Approved for transporting horses for 8 hours Space for 5 horses Honda Em4500cxs generator (it has not been used by the owner, uncertain condition) Battery pack 6 sleeping places 4 belt places Laedpfxjx Ndnwe Affsk The kitchen Refrigerator Cooktop Television Bath toilet Wash Radio Light Country road Videos Ready for delivery Description: We have a 2008 Daf Fa 55 4x2 horse trailer with space for 5 horses, see video, for sale. The car is EU approved and functions as it should according to the owner. The car has always been stored under cover after use. There has been a small leak in the rear roof hatch. The owner has repaired this with silicone around the hatch. But not sure if it will hold tight. Since it has not been used since. Errors and omissions may occur and some cost may be expected. Ready for delivery Km: 131911 HK: 285 Technical approved: Yes EU-approved until: 31.10.2026 Own weight: 9700 Euro: 4 Model: Fa 55 4x2 hestebil m/ plass til 5 hester se video Gearbox: Automatic

Condition: used, Unused and never installed Steriline sterile vial filling line made in 2021 with an output capacity of 24,000 pieces/hour. Sale includes ancillary equipment as described in equipment list below. The line was designed to operate in ORABS (Open Restricted Access Barrier System) containment system and currently capable of filling into vial sizes 6R (5ml) and 2R (2ml) with lyo / injection stoppers or alu caps. (OEM can provide change parts for alternative sized vials and cap formats.) Major equipment includes: - Rotary washing machine RC-V8 Laodex Nimfopfx Affsk - Depyrogenating tunnel ST9-CCS - Tray Loader / TL2 - (4) LAF (Laminar Air Flow) Units - Vial filling machine VFM400 + oRABS - Swing way belt SWB1 + oRABS - Positive diverting system PDS + oRABS - Vial capping machine VCM400 + oRABS - Swing way belt SWB2 - Connection belt LBT - Swing way belt SWB3 - Rotating table RT Ancillary equipment includes: - (2) Fedegari FOF4/9 autoclaves - Veolia Waters Orion 6000 E WPU production unit - Steris Finn Aqua Pure steam generator - Steris Finn Aqua multiple effect water still - Atlas Copco ZT37VSD WP air compressor - WFI 15,000 litre storage tank - WPU 6000 litre storage tank - Main control cabinet - (2) Certuss steam generators - (2) Permak economiser and pump - Distribution system instruments (WPU, WFI, distribution system instruments, pipes, valves, pumps, etc.) - Clean room panels and ceilings - Daikin chiller Full design specifications available.

Condition: excellent (used), Compressed air filter, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter, ventilation filter Laedpfx Afsvyqugefjk -Manufacturer: UCC Parker, Air Filter Air Breather Filter OVP -Type: SPA 7131 AB -Number: 25x air filters available -Price: per piece -Packaging dimensions: 80/80/H75 mm -Weight: 0.1 kg/piece

Condition: used, Year of construction: 2018, Startech cn MAIN FEATURES FLEXIBLE AND CUSTOMIZED PRODUCTION COMBINED WITH SPEED AND PRECISION DRILLING FROM ABOVE WITH REFERENCE TO THE TOP OF THE PLATE ALLOWS ABSOLUTELY PRECISION MACHINING NUMERICAL CONTROL WITH 7" COLOR SCREEN: SIMPLE AND INTUITIVE TECHNICAL DATA Startech CN AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Drilling/slotting work area mm 0 x 800/0 x 800 X-axis stroke mm 750 Max. travel speed of the X-Y axes m / min 25 DRILLING UNIT Vertical spindles number 7 (4X-4Y one of them common) Horizontal spindles (along the Y axis) Number 2 (1+1) Horizontal spindles (along the X axis) Number 1 Fixed groove saw (direction) X Diameter of the groove saw mm 100 Max. thickness of the groove saw mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Speed of the groove saw rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air demand bar 6 Compressed air consumption Nl/cycle 90 Extraction demand m3 / h 1200 Extraction air speed m / sec 20 Extraction nozzle diameter mm 120 GENERAL CHARACTERISTICS Universal CNC drilling machine with work table with fixed gantry and movable workpiece for performing the following machining operations: - Vertical drilling on the panel surface - Horizontal drilling on all four sides of the workpiece - Groove Milling with integrated groove saw in the "X" direction. Self-supporting structure. Machine frame made of tubular steel to provide a large base for the work table. The structure is positioned on three self-leveling feet. The electrical control cabinet is integrated into the machine frame. "Easy Motion" central Bakelite support table: - an MDF sector for through-hole drilling, automatically pivoting for horizontal drilling - an infeed roller that facilitates panel loading - a rear roller conveyor that facilitates panel sliding - left and right stops - a central aligner with manual adjustment. The left and right stops are required to drill the two opposite sides of the panel horizontally in the "X" direction. Panel positioning along the X axis is achieved by means of suction cups. Unit support. This is a gantry structure made of tubular steel. The main machining unit is installed on the gantry. F10L drilling unit includes: - 7 independent vertical spindles - Drill chuck D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads, 1 in X direction with a single drill, 1 double drilling head in Y direction (1 + 1 drill chuck D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic travel per spindle 70 mm - Horizontal pneumatic travel of the drilling unit Positioning of the workpiece and drive of the machining unit A CNC-controlled suction cup clamps the workpiece and positions it sequentially under the machining unit during machining. The movement in X and Y axis is carried out on THK guides with transmission on reinforced toothed Movement in Z axis is carried out pneumatically on "ball-bushing" guides with positioning on stop adjustable via the positioning of the working units is carried out via technology and drives with -CONTROL The control was specially developed for use Lsdovwbp Aopfx Affeak

Condition: new, power: 104 kW (141.40 HP), fuel type: diesel, color: yellow, Year of construction: 2025, operating hours: 20 h, Equipment: air conditioning, Technical information Track width: 60 cm Empty weight: 21.200 kg Make of engine: 6BT5.9-C Top speed: 5 km/h Condition General condition: very good Technical condition: very good Visual appearance: very good Lasdpfx Aox Nc Sbjffsk Other information Undercarriage condition: 100 Output of the auxiliary hydraulics: 220 l/min Emission level: Stage II / Tier II Delivery terms: EXW Transport dimensions (LxWxH): 9,57x2,8x2,92 Production country: IN Additional information Please contact Dennis van Loon, Antoon Schroder or Jeroen Rijk for more information

Condition: used, mileage: 177,951 km, power: 140 kW (190.35 HP), fuel type: diesel, gearing type: mechanical, first registration: 03/2017, emission class: euro6, color: silver, brakes: retarder, number of seats: 31, Equipment: ABS, air conditioning, parking heater, General - Engine: Isuzu AdBlue - Emission standard: EURO 6 - Total seating capacity: 31 - Seats: 29+1+1 sleeper seats with 3-point seat belts - Transmission: Manual gearbox Safety * Retarder * Cruise control * ABS, ASR * Fog lights Passenger compartment * Auxiliary heater * Air conditioning * Tables * Curtains * Luggage racks Lajdpfexlwkhsx Affok * Luggage nets * Overhead air nozzles * Reading lights * Double glazing * Tour guide microphone * Driver microphone Audio, Communication, Electronics * Radio, CD * USB port at multimedia system * Video, DVD Exterior * Lift / lowering system * Power steering * Digital tachograph card * Sun visor * Electrically adjustable exterior mirrors * Roof hatches * Roof fans * Roof ventilators Other * Twin tyres * Vehicle length: 7.30 m * Vehicle width: 2.82 m * Hubcaps * Tyre tread front axles approx. 40% * Tyre tread rear axles approx. 40% our internal vehicle number: 11834 Errors excepted. Images and text may differ from the actual vehicle. We always have more than 300 vehicles in stock.

Condition: ready for operation (used), Year of construction: 2013, General Data Machine weight 12020 kg Control Unit Brand MAZATROL Movement X-Axis Movement 203.2 mm Y-Axis Movement 70.10 mm Z-Axis Movement 71.8 mm Additional Equipment Tool Taper: CAT#40 / Automatic Tool Changer (ATC): 48 tools This 3-axis Mazak VCN 700E/40-II vertical machining center was manufactured in 2013. Ideal for precision engineering, it offers robust construction and reliable performance. Consider the opportunity to buy this Mazak VCN 700E/40-II vertical machining center. Contact us for more information. Application Types Lasdpfx Afjx H U Amofek Milling

Condition: used, Year of construction: 2011, fuel type: diesel, General information Field of application: Construction Weights Empty weight: 59.735 kg Functional Lifting capacity: 530 kg Working height: 10.200 cm CE mark: yes Ledpfjwx Nznex Affeak Condition General condition: average Technical condition: average Visual appearance: average Other information Delivery terms: EXW Transport dimensions (LxWxH): 16,5x2,75x3,96 Production country: DE Additional information Please contact Christian Theißen for more information Manufacturer: Wumag Model: WT 1000 Year of build: 2011 Condition: Used Data: Max. working height: 102,50 m Max. platform height: 100,50 m Max. reach: 35,80 m Total dimensions LxWxH: 16,50 x 2,75 x 3,96 m Platform dimensions LxW: 3,70* x 0,90 m Max. basket load: 530 kg Swivel range: endless Ground pressure: 420 kN Ground clearance: 0,31 m Support width vertical: 5,55 m Support width one side: 6,80 m Support width both sides: 8,05 m Support length: 8,75 m Own weight: 59.735 kg Special features: Swivel work basket, Basket arm, rotation angle / 115°, Advantages: extremely manoeuvrable due to four steerable axles, automatic support, home function, Chassis data can be retrieved in the basket, Triflex cable for video transmission, complete 2.Steering position at the Rotating tower, *telescopic then 2.30 m, powerlift system and glass vacuum cup.

Condition: used, mileage: 4,212 km, Year of construction: 2023, operating hours: 1,469 h, General information Field of application: Construction Serial number: 52509646 Drivetrain Drive: Wheel Laodpfx Afsxp Akbjfsk Weights Empty weight: 68.820 kg Functional Lifting capacity: 250.000 kg Other information Front tyres / undercarriage remaining: 90 Rear tyres remaining : 90 Tyre brand: - Carrier engine: - Upper engine: - Counterweight: 80000 Transport dimensions (LxWxH): 15.64x2.75x3.99 Additional information Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Lajdpfxjvvkfdo Affsk

Condition: new, power: 104 kW (141.40 HP), fuel type: diesel, color: yellow, Year of construction: 2025, operating hours: 20 h, Equipment: air conditioning, Technical information Track width: 60 cm Empty weight: 21.200 kg Make of engine: 6BT5.9-C Top speed: 5 km/h Condition General condition: very good Technical condition: very good Visual appearance: very good Ledpfx Afjx Nc Rwefsak Other information Undercarriage condition: 100 Output of the auxiliary hydraulics: 220 l/min Emission level: Stage II / Tier II Delivery terms: EXW Transport dimensions (LxWxH): 9,57x2,8x2,92 Production country: IN Additional information Please contact Dennis van Loon, Antoon Schroder or Jeroen Rijk for more information

Year of construction: 2019, condition: used, General Information: The MobyLift is a handy tool for ergonomically lifting, transporting, and setting up products such as doors, tabletops, and other panels. From a work-related perspective, the MobyLift is a responsible investment. It is easy to use, reduces the number of damaged products, increases productivity, prevents back pain, and thus reduces work absence. The MobyLift was developed in collaboration with reputable assembly companies, combining their knowledge and experience with our know-how to create a practical tool. The MobyLift MC-120-H consists of the following modules: · Mobile base · Electric lifting and tilting system · Automatic vacuum control · Wireless electric operation. The MobyLift MC-120-H is designed so that it can be quickly and easily disassembled into a number of portable modules after being switched off. This makes it very convenient to load and unload the MobyLift or to move it to another floor or building. The MC-120-H is supplied with a 24 V battery charger for the electric lifting and tilting system and is equipped with a charge level indicator to continuously monitor the battery status. Specifications: - Lifting capacity: 120 kg - Lifting height: 100 cm, electrically operated - Tilt angle, front - rear: 37°, electrically operated - Swivel angle of the head joint on both sides: 90° - Rotation angle of the head joint: 360°, continuous - Side shift: 7 cm - Weight: 150 kg, can be disassembled into modules Lasdov Dauwepfx Affek Storage location: Nattheim

Condition: new, power: 92 kW (125.09 HP), fuel type: diesel, color: yellow, Year of construction: 2025, operating hours: 5 h, Equipment: air conditioning, Technical information Track width: 60 cm Empty weight: 19.800 kg Make of engine: ALUW06DTI Top speed: 6 km/h Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Undercarriage condition: 100 Output of the auxiliary hydraulics: 400 l/min Lsdpfx Aex Nc Rkeffeak Emission level: Stage II / Tier II Delivery terms: EXW Transport dimensions (LxWxH): 9,52x2,8x3,1 Production country: IN Additional information Please contact Dennis van Loon, Antoon Schroder or Jeroen Rijk for more information

Condition: used, Year of construction: 2020, CNC-CONTROLLED MACHINING CENTER WITH MULTIFUNCTIONAL TABLE - WORK CELL VERSIONX400 CELLDrilling and milling made for you!The numerically controlled machining center is equipped with a wide range of milling/drilling tools to meet every need in the processing of wood and similar materials.- More powerful, with drilling spindles with 8,000 rpm and . Technology, the toughest spindle available on the market, with over 1,000 maintenance-free hours of use. Better and more comprehensively equipped, with various configuration options thanks to the multifunctional table to optimally equip the machine according to your needs. Easier and more understandable programming thanks to the integrated MAESTRO CNC CAD-CAM module. Easier to use: the work table is accessible at all times, the electrical cabinet and vacuum pump are integrated, and in the PRO SPACE configuration there are no guards. Supporting structure. The supporting structure consists of a particularly strong monolithic steel base, heavily ribbed and very rigid. The particularly wide support was specifically designed to give the machine stability, ensuring consistent precision regardless of the working conditions and eliminating the need to anchor the machine to the floor. The base forms a large and solid support for the mobile column: the work unit is thus equipped with a balanced, stable, and durable support that can withstand the most extreme stresses, ensuring higher quality performance and greater precision. The mobile gantry consists of a single, solid unit anchored to the base on both sides and slides on pyrotechnic guides with top-quality ball-return slides. The dual motorization along the X-axis ensures top performance even under demanding working conditions. The movement of the lower moving unit (X-axis) and the working unit along the rod of the moving unit (Y-axis) is achieved thanks to a rack/pinion transmission with helical teeth. this creates a greater tooth-to-tooth thrust which achieves greater acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures absolute quality of finishes as any vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters; These ensure: - Reduced processing times thanks to improved acceleration - Better positioning accuracy thanks to the high-resolution encoder - Zeroing of setup operations when switching on the machine thanks to absolute encoders - Zeroing of general maintenance operations since there are no brushes with the "brushless" system The management of the axis displacement and, in general, of the machine's working elements is carried out by an industrial NS module with digital D Lodpfxjvvi N Io Affsak

Condition: new, power: 92 kW (125.09 HP), fuel type: diesel, color: yellow, Year of construction: 2025, operating hours: 5 h, Technical information Track width: 60 cm Empty weight: 19.800 kg Make of engine: ALUW06DTI Top speed: 6 km/h Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Undercarriage condition: 100 Output of the auxiliary hydraulics: 400 l/min Emission level: Stage II / Tier II Delivery terms: EXW Transport dimensions (LxWxH): 9,52x2,8x3,1 Production country: IN Lodpfx Aox Nc Rdsffeak Additional information Please contact Dennis van Loon, Antoon Schroder or Jeroen Rijk for more information

Condition: used, Year of construction: 2019, Incl. tools CNC-CONTROLLED MACHINING CENTER morbidelli m100 Drilling and milling made for you! This numerically controlled machining center is equipped with a wide range of milling and drilling tools to meet every woodworking requirement. - Highly powerful - with 8,000 rpm drilling spindles and . technology, the most stable spindle available on the market, with more than 1,000 maintenance-free hours of use. - Optimally and comprehensively equipped - the vacuum cleaners can be individually configured with the TV FLEX work table to customize the machine to meet individual requirements. - Easy and understandable programming thanks to the integrated Cad-Cam MAESTRO CNC software - Easy to operate; the lowered machine frame makes the work table accessible at all times. The control cabinet and vacuum pump are integrated into the machine bed, and in the PRO SPACE version, no additional structural protective measures are necessary. Supporting structureThe supporting structure consists of a particularly strong monolithic steel base, ribbed and very robust. The particularly wide support was specifically designed to give the machine stability, ensuring constant precision in all working conditions. The machine does not need to be anchored to the ground. The base provides a large and solid support for the mobile column: the work unit is equipped with a balanced, stable and resistant support that can withstand the most extreme stresses, ensuring superior performance and greater precision. The mobile gantry consists of a solid single part anchored to the base and the work unit is fixed to it and moves along Y and Z axes, also on prismatic guides with ball return sliding blocks of the highest quality. The movement of the lower moving unit (X-axis) and the working unit along the crosshead of the moving unit (Y-axis) is achieved thanks to the power transmission via a rack and pinion with helical teeth; This creates a greater tooth-to-tooth thrust, which achieves greater acceleration and higher speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return, which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures very high quality finishing as vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters. These ensure:- Reduced machining times thanks to improved acceleration- Better positioning accuracy thanks to the high resolution encoder- Elimination of setup operations when switching on the machine thanks to absolute encoders- Elimination of general maintenance operations as there are no brushes with the "brushless" systemThe management of the axis displacement and in general of the working elements of the machine is done via e Lajdjvvi Scjpfx Affsk

Condition: good (used), power: 68 kW (92.45 HP), fuel type: diesel, color: yellow, Year of construction: 2014, operating hours: 5,811 h, Equipment: air conditioning, General information Field of application: Construction Serial number: KMT0D121E01080161 Ledjx Nc N Hepfx Affeak Technical information Track width: 60 cm Drive: Track Make of engine: SAA4D95LE-6 Empty weight: 8.640 kg Functional CE mark: yes Condition Technical condition: good Visual appearance: good Other information Front tyres / undercarriage remaining: 80 Emission level: Stage IIIB / Tier IV interim Delivery terms: EXW Transport dimensions (LxWxH): 4,275x3,2x2,775 Production country: JP Additional information Please contact Antoon Schroder, Dennis van Loon or Jeroen Rijk for more information

Condition: good (used), power: 170 kW (231.14 HP), fuel type: diesel, color: yellow, Year of construction: 2018, operating hours: 8,815 h, Equipment: air conditioning, General information Field of application: Construction Serial number: CAT00D6TPSGZ00303 Drivetrain AdBlue system: Yes Drive: Track Make of engine: C9.3 Lsdpfx Afsx Nc I Nefsak Weights Empty weight: 23.299 kg Functional CE mark: yes Condition Technical condition: good Visual appearance: good Other information EPA Marked: yes Front tyres / undercarriage remaining: 100 Emission level: Stage IV / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 5,471x2,64x3,253 Additional information Please contact Antoon Schroder, Dennis van Loon or Jeroen Rijk for more information

Condition: good (used), Year of construction: 2015, General information Field of application: Construction Serial number: 001 Weights Empty weight: 9.500 kg Functional Bucket capacity: 8 m³ Condition Technical condition: good Visual appearance: good Other information Lsdsx Nc Icopfx Affeak Fits to following machines: Volvo L350F Rock Bucket / Side Tip Bucket type: Loader bucket Delivery terms: EXW Production country: IT Additional information Please contact Dennis van Loon, Antoon Schroder or Jeroen Rijk for more information