Used Aks for sale (675)

Year of construction: 2023, operating hours: 0 h, condition: new, HB12X6 (optional 12X3) is suitable for bending your reinforcing steel mesh into the desired shape. Product information: - Motor Power: 7,5 kW (5,5 kW) - Voltage: 380 V - Length: 6400 mm (3400 mm) - Width: 1000 mm Gcodpsm Tmddofx Ag Dsa - Height: 1090 mm - Hydraulic Oil Tank Capacity: 36 l - 6 m (3 m optional) - 3 stops - Bending angles: 45°-90°-135° - Net weight: 1250 kg (710 kg) Shipping: Europe-wide (self-collection also possible) If you have any questions, please do not hesitate to contact us!

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: GM-1400H, total width: 3,000 mm, total length: 5,000 mm, total height: 3,250 mm, type of input current: three-phase, energy consumption: 60 kWh, input current: 80 A, workpiece weight (max.): 2,720 kg, power: 48 kW (65.26 HP), workpiece height (max.): 950 mm, warranty duration: 1 months, working range: 319 mm, number of chambers: 3, Equipment: adjustable chassis, Conveyors are produced in such a way that they will not scratch the glass and leave no stains. The machine is made of steel and aluminum materials. Thanks to specially designed water sprays and brushes, the glasses comes out completely free from oils, stains and dust and cleaned. Angles of water nozzles will be adjustable. Conveyor rollers are produced of Ø 55 mm vulcanized rubber . Induction hardened gears are used in transmission gears. There will be 3 Washing Cabins, pre-washing, washing and rinsing washing system. In the pre-washing section, the upper and lower surfaces of the glass are washed with high-pressure spray nozzles. In the same cabin ,will be compressed air to the upper surface of the glass with air knife and the water will be completely cleansed. Thanks to this process, the glasses will go into the wash without entering the brush washing compartment, free from their dirt. There are 6 Brushes (Ø 120 mm.) in the Washing Machine and they will be able to wash laminated glasses. 2 of the brushes will be in the inlet (pre-wash) and 4 in the outlet (rinse-wash). there are brushes in total, 2 piece of them at the entrance and 4 pieces at the exit. 2 of the brushes will be suitable for laminated glass washing. the other 4 brushes will be for normal standard use. Features of brushes to wash laminated glass is ; Bristle material will be 6.6 P.A. The bristle diameter will be 0.15mm. The bristle length will be between 30-35 mm. Brush shaft will be produced of ASI 304L quality stainless material. During washing, the brush suitable for the laminated coated glass, whose properties are given above, will come into contact with the surface of the glass. To the other part of the glass will come into contact standard glass washing brush. The washing and air drying section will have an elevator system with a 350 mm opening and closing structure for maintenance and cleaning. Thanks to the elevator, the glass thickness (3-19 mm) can be adjusted easily. The speed of the conveyors will be adjustable between 0 m/min and 5 m/min. There will be a sound insulation cabinet in the drying fan. 1 piece of G4 filter and 1 piece of F7 filter will be at the air inlet of the drying fan . The filters will be of standard size and can be changed and will be 592*592*20 mm square type. 23. Thanks to the powerful air knives, the glasses will come to the exit conveyor dry. Gcjdpfx Agsr Ak Exs Dja The height of the air knives will be adjustable. All pipes and hoses in the machine will be in a matte color to prevent algae formation in daylight. 26. Digital displays and many electronic equipment will be Delta or Schneider brand. There will be a stop sensor at the exit of the conveyor to prevent the glass coming from the machine from falling to the ground. There will be lighting system in the washing exit area for quality control from the bottoms and top of the conveyor towards the glasses. These lightnings will have the ability to be switched on and off separately. There are 3 separate water tanks in the machine. There will be an overflow water line that will prevent the water in the water tanks from overflowing.

Condition: like new (used), Year of construction: 2023, operating hours: 468 h, functionality: fully functional, machine/vehicle number: 4000-2023-015, - Holemaster 4000 D Line 6X is 6 sided CNC Drilling/Boring Machine. - Holemaster 4000 D Line can perform drilling,grooving and milling process - Maximum Working Area(mm): X-Unlimited / Y-1300 / Z-50 - 1 Drilling Head Minimum Working Area (mm): X-200/ Y-100 / Z-10 - 2 Drilling Heads Minimum Working Area (mm): X-200/ Y-200 / Z-10 Gcsdpfx Ageula Hrj Dsa - It has 2 pieces special designed Italian brand FAM(Morbidelli) drilling unit which is composed of 10 vertical bits,8 horizontal bits and 1 saw blade.(20 vertical bits,16 horizontal bits and 2 saw blades) - It has 4 kw German brand Hertz spindle. - It has Italian brand FAM(Morbidelli) drilling unit which is composed of 10 vertical drilling bits - Holemaster 4000 D Line 6X machine has air flotation table for loading side and automatic conveyor table for unloading side. - Holemaster 4000 D Line 6X has Italian brand Wide Automation safety mats which provides safety for operator on both loading and unloading tables. - Holemaster 4000 D Line 6X has central lubrication system which lubricates lineer rails automatically. - Holemaster 4000 D Line 6X has Japanese brand Omron Motion Control system which is one of the most suitable systems for point to point drilling processes. - Holemaster 4000 D Line 6X has German brand Siemens electric units. - Barcode reader The machine is still in production use. Available from Мarch 2025.

Condition: excellent (used), Working width 45cm Length 200 cm with the arm 400 cm height 140cm Gjdegqug Ajpfx Ag Doca 0,37 kW motor approx. 55 kW In very good condition.

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 1,685 kg, fuel type: diesel, tank capacity: 155 l, color: yellow, power: 102 kW (138.68 HP), output current: 158 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 88 kW (119.65 HP), nominal power (apparent): 110 kVA, continuous power: 80 kW (108.77 HP), continuous power (apparent): 100 kVA, total length: 2,390 mm, total width: 1,058 mm, total height: 1,681 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Cummins, type of cooling: water, PRP-Leistung: 80 kW / 100 kVA Gedowy Iyropfx Ag Djca ESP-Leistung: 88 kW / 110 kVA Motor: AKSA A4CRX46TI Abgasstufe: 2 Drehzahl: 1.500 U/min elektronischer Drehzahlregler Betriebsspannung: 24 V Kühlung: wassergekühlt Generator: Aksa AK 480 Spannung: 400/231 V Spannungsregler: SX460 Steuertafel: DSE 6120 - Notstromautomatik Batterieladegerät: 5 Ampere Typ: Haubenaggregat; wettergeschützt, schallgedämmt •Not-Aus-Schalter •Kühler mit mechanischem Ventilator •Grundrahmenkonstruktion mit integriertem Kraftstofftank (155 L) und Schwingungsdämpfern •Kühlwasservorwärmung •Spannungs- und Frequenzregelung nach ISO 8528-5 •Aggregat nur für den stationären Einsatz verwendbar

Year of construction: 2023, operating hours: 0 h, condition: new, MG20B is suitable for bending your steel into the desired shape. Godjm Sgx Djpfx Ag Djca Product information: - Voltage: 380 V (optional with 220 V available) - Motor Power: 1,5 kW - Dimensions Machine: 60cm x 45cm x 32cm - Dimensions Machine frame: 57cm x 44cm x 60cm - Ideal for your construction company or also for your construction sites - Easy to carry - In addition to the individual bending process, a bending sequence can also be programmed - Stirrup head for different reinforcing steel Ø are included in the accessories (incl. accessories, see pictures) - Possible in automatic or manual mode - Bending capacities depending on steel strength according to table (see pictures) - Optional available with digital control panel - Net weight: 95 kg Shipping: Europe-wide (self-collection also possible) If you have any questions, please do not hesitate to contact us!

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 1,685 kg, fuel type: diesel, tank capacity: 155 l, color: beige, power: 102 kW (138.68 HP), output current: 158 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 88 kW (119.65 HP), nominal power (apparent): 110 kVA, continuous power: 80 kW (108.77 HP), continuous power (apparent): 100 kVA, total length: 2,390 mm, total width: 1,058 mm, total height: 1,681 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: AKSA, type of cooling: water, PRP-Leistung: 80 kW / 100 kVA ESP-Leistung: 88 kW / 110 kVA Motor: AKSA A4CRX46TI Abgasstufe: 2 Drehzahl: 1.500 U/min elektronischer Drehzahlregler Betriebsspannung: 24 V Kühlung: wassergekühlt Generator: Aksa AK 480 Godswy Ixzepfx Ag Djca Spannung: 400/231 V Spannungsregler: SX460 Steuertafel: DSE 6120 - Notstromautomatik Batterieladegerät: 5 Ampere Typ: Haubenaggregat; wettergeschützt, schallgedämmt •Not-Aus-Schalter •Kühler mit mechanischem Ventilator •Grundrahmenkonstruktion mit integriertem Kraftstofftank (155 L) und Schwingungsdämpfern •Kühlwasservorwärmung •Spannungs- und Frequenzregelung nach ISO 8528-5 •Aggregat nur für den stationären Einsatz verwendbar

Year of construction: 2023, operating hours: 0 h, condition: new, MATRIX55S is suitable for cutting your rebar to the desired length (optional available with Synclone45S, Doublebender). Product information: - Hydraulic Motor: 7,5 kW - Synclone45S is optionally available for double bending - 360° swiveling digital control panel - Barcode system optional available - Total weight: 5200 kg Gcedpfom Tqazex Ag Dja Shipping: Europe-wide (self-collection also possible) If you have any questions, please do not hesitate to contact us!

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 4,500 kg, fuel type: diesel, tank capacity: 700 l, color: beige, power: 322.15 kW (438.00 HP), output current: 591 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 328 kW (445.96 HP), nominal power (apparent): 410 kVA, continuous power: 269 kW (365.74 HP), continuous power (apparent): 370 kVA, total length: 4,463 mm, total width: 1,606 mm, total height: 2,500 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Doosan, type of cooling: water, AVS diesel generator DW 370 DO2 15 AK14A PRP power: 296 kW / 370 kVA ESP power: 328 kW / 410 kVA Engine: Doosan P158LE-1 Emission stage: 2 Speed: 1,500 rpm electronic speed governor Operating voltage: 24 V Cooling: water-cooled Generator: Mecc Alte ECO 40 1S/4 Gcsdpfx Agowu Ecto Dja Voltage: 400 V Voltage regulator: DSR1 Control panel: DSE 7320 Battery charger: 5 ampere Type: Canopied unit; weatherproof, soundproofed • Emergency stop switch • Radiator with mechanical fan • Base frame construction with integrated fuel tank (700 L) and vibration dampers • Voltage and frequency regulation according to ISO 8528-5 • Unit suitable for stationary operation only Please note that these units are not approved for mobile use in accordance with current EU regulations. The units are sold as B-grade goods. B-grade means the units may have visual imperfections such as flash rust or rust on the housing. These do not affect the functionality or performance of the units in any way. By accepting this offer, you expressly acknowledge the described characteristics and corresponding condition of the units.

Year of construction: 2023, operating hours: 0 h, condition: new, H- & M-Series is suitable for cutting your rebar to the desired length. H-Series (hydraulic): H26, H38S, H45S, H55, SH60 M-Series (mechanical): M36, M45, M55 Product information: - Voltage: 380 V (16 A) - Motor Power: 2,2 kW - 7,5 kW - Adjustable blade stopper - Silent, safe and environment friendly - Less maintenance - Long product life - Ideal for your construction company or also for your construction sites - Cutting capacities depending on steel strength according to table (see pictures) - Included in accessories: 1x additional blade, 1x allen key - Hydraulic Oil Tank Capacity: 12,5 lt. - 35 lt. (HLP32) | SH60: 163 lt. - Net weight: 120 kg - 960 kg Gcjdpfx Agom Shxie Doa Mechanical: - 0,8 sec. cutting time - High cutting performance - Foot pedal and arm control Shipping: Europe-wide (self-collection also possible) If you have any questions, please do not hesitate to contact us!

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 1,470 kg, fuel type: diesel, tank capacity: 230 l, color: beige, power: 27.21 kW (37.00 HP), output current: 47 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 17 kW (23.11 HP), nominal power (apparent): 22 kVA, continuous power: 20 kW (27.19 HP), continuous power (apparent): 20 kVA, total length: 2,800 mm, total width: 1,063 mm, total height: 1,703 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Cummins, type of cooling: water, AVS Diesel Generator DW 20 CU 15 AK14A PRP Power: 16 kW / 20 kVA ESP Power: 17.6 kW / 22 kVA Gsdpjwu D Unsfx Ag Dsca Engine: Cummins 4B3.9G11 Emission Stage: - Speed: 1,500 rpm Mechanical speed governor Operating voltage: 12 V Cooling: water-cooled Generator: Stamford PI114D Voltage: 400/231 V Control panel: InteliLite AMF Type: canopy set; weather-protected, sound-insulated • Emergency stop switch • Radiator with mechanical fan • Base frame design with integrated fuel tank (230 L) and forklift pockets • Voltage and frequency regulation according to ISO 8528-5 • Unit intended for stationary use only Please note that these units are not approved for mobile use in accordance with the applicable EU regulation. The units are sold as B-grade goods. B-grade means that the units may show cosmetic imperfections such as surface rust or rust on the enclosure. These defects do not affect the function or performance of the units in any way. By accepting this offer, you explicitly acknowledge the described properties of the units and their stated condition.

Year of construction: 2023, operating hours: 0 h, condition: new, BCZ600 is suitable for sawing your stones/concrete. Product information: - Voltage: 380 V (16 A) - Engine Power: 3 kW - Engine Rotation: 1500 rpm - Frequency: 50 Hz Godpfjncffvsx Ag Deca - Table Size: 480mm x 380mm - Working height: Ergonomic height of 88 cm - Dimensions Machine: 1510mm x 750mm x 1530mm - Saw Diameter: 600 mm - Saw Thickness: 4,4 mm - Net weight: 186 kg Shipping: Europe-wide (self-collection also possible) If you have any questions, please do not hesitate to contact us!

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 915 kg, fuel type: diesel, tank capacity: 70 l, color: beige, power: 27.21 kW (37.00 HP), output current: 47 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 26 kW (35.35 HP), nominal power (apparent): 33 kVA, continuous power: 24 kW (32.63 HP), continuous power (apparent): 30 kVA, total length: 2,100 mm, total width: 960 mm, total height: 1,500 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: John Deere, type of cooling: water, AVS-Dieselstromaggregat DW 30 JD2 15 AK14A PRP-Power: 24 kW / 30 kVA ESP-Power: 26.4 kW / 33 kVA Gcodpjwu D Nljfx Ag Dea Engine: John Deere 3029DFG20 Emission Stage: 2 Speed: 1,500 rpm Mechanical speed governor Operating voltage: 12 V Cooling: water-cooled Generator: Mecc Alte ECP 28-VL/4 C Voltage: 400/231 V Voltage regulator: DSR Control panel: DSE 6120 Battery charger: 5 ampere Type: Canopied aggregate; weather-protected, soundproofed • Emergency stop switch • Radiator with mechanical fan • Base frame construction with integrated fuel tank (70 L) and vibration dampers • Coolant preheater • Voltage and frequency regulation as per ISO 8528-5 • Unit suitable only for stationary use Please note that, according to applicable EU regulations, these units are not approved for mobile use. The generators are sold as B-grade goods. B-grade means that the units may have cosmetic defects such as surface rust or rust on the housing. However, these defects do not affect the functionality or performance of the generators in any way. By accepting this offer, you expressly acknowledge the described properties of the units and their associated condition.

Condition: new, Year of construction: 2025, SLS12 is suitable for Bending & Cutting your rebar from the coils to the desired shape. High productivity and fast solution for projects. Gjdpfx Ajm Tm H Asg Djca Product information: - Single Wire: 6-12 mm - Double Wire: 6-10 mm - Driving Motor Power: 11 kW Servo - Driving Speed: 120 m/min - Bending Motor Power: 4 kW Servo - Bending Speed: 1200°/sec. - Voltage: 400 V 50 Hz / optional 60 Hz - HMI 15" Display - Coiler: 3 to. (optional 5 to.) - Dimension Machine: 5000mm x 1710mm x 2340mm - Dimension Coiler: 2150mm x 2120mm x 2300mm - Net weight Machine: 3000 kg - Net weight Coiler: 1000 kg Shipping: Europe-wide (self-collection also possible) If you have any questions, please do not hesitate to contact us!

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 565 kg, fuel type: diesel, tank capacity: 38 l, color: beige, power: 12.06 kW (16.40 HP), output current: 21 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 11.6 kW (15.77 HP), nominal power (apparent): 15 kVA, continuous power: 10.4 kW (14.14 HP), continuous power (apparent): 13 kVA, total length: 1,850 mm, total width: 850 mm, total height: 900 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Perkins, type of cooling: water, AKSA AP 15 Perkins PRP output: 10.4 kW / 13 kVA ESP output: 11.6 kW / 14.5 kVA Engine: Perkins 403A-15G1 Emission level: Stage 2 Speed: 1,500 rpm Mechanical governor Operating voltage: 12 V Cooling: water-cooled Generator: Stamford or equivalent Voltage: 400/231 V Gsdpfjwu Dbuox Ag Djca Voltage regulator: AS540 Control panel: DSE 6120 – emergency automatic start Battery charger: 5 ampere Type: Canopy unit; weatherproof, soundproofed Emergency stop switch Radiator with mechanical fan Base frame construction with integrated fuel tank (38 L) and vibration dampers Coolant preheating Voltage and frequency regulation according to ISO 8528-5 Unit suitable for stationary use only Please note that, in accordance with the applicable EU regulation, these units are not approved for mobile use. The units are sold as B-stock. B-stock means the units may show cosmetic defects such as minor rust, or rust on the housing. These defects do not affect the functionality or performance of the units in any way. By accepting this offer, you expressly acknowledge the described characteristics and the associated condition of the units.

Year of construction: 1981, condition: good (used), Spindle motor for CNC lathe MAZAK SLAT TURN 30, year of manufacture 1981. Gedpfx Agoxr Dhyo Djca

Condition: used, Year of construction: 1993, press force 100 t stroke - 170 mm working lenght 3200 mm dayligth 450 mm table dimensions 3220 x 800 mm speed down 50 mm/s speed up 150 mm/s working speed 7 mm/s oil volume 600 l power requirement 20,0 kW Weight 16,0 t dimensions (WxDxH) 3,7 x 2,5 x 2,6 m year of manufacture 1975 - modernization 1993 permitted for manual loading according to the German Safety Regulations (UVV- retrofitted 1993 by the manufacturer) with hydraulic-mechanical drive, stroke adjustment with fine andjustment and inching speed, manual ram adjustment, two-hand and foot operation as is where is, WITHOUT putting into operation Gcedpfxovuk Rdo Ag Dea

Condition: new, We offer you fully automatic circular sawing machines and complete sawing centers from the "Profilma", "KS", and "SW" series with blade diameters of up to 650mm. Loading magazines and unloading systems are tailored to your requirements. A high-performance extraction unit with oil mist separator completes the convenience package. Godpjx E U Dnefx Ag Deca Contact us – together we will find the optimal solution for your production!

Condition: used, Specification Value Nitrogen 30 L/min 6.89 bar · 1.059 CFM 100 psi Nitrogen Pressure Dewpoint -40°C / -40°F Gjdjx E R H Sepfx Ag Dsca Maximum Relative Humidity 70% Maximum Altitude 2000 meters Maximum Ambient Temperature 30°C / 86°F Gas Outlets 1 × 1/4" BSP Female Particles < 0.1 μm Phthalates None Noise Level 59 dB(A) 1 m Electrical Requirements 230 V, 50/60 Hz, 5.0 A Power Consumption 1150 watts Dimensions (cm/in) W×D×H 60 × 67 × 94 cm / 24 × 27 × 37 in Weight (kg/lbs) 112.5 kg / 248 lbs

Condition: used, Year of construction: 2008, Year of construction: 2008 Gcodpfox Dl Niox Ag Dsa

Condition: used, mileage: 570,000 km, power: 331 kW (450.03 HP), fuel type: diesel, color: white, axle configuration: 6x2, fuel: diesel, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2020, Equipment: ABS, air conditioning, cruise control, retarder, spoiler, traction control, Year of manufacture: 2020 Front axle: Steering; Tyre profile left: 20%; Tyre profile right: 20% Rear axle 1: Double wheels; Tyre profile left inner: 60%; Tyre profile left outer: 60%; Tyre profile right outer: 60%; Tyre profile right outer: 60% Rear axle 2: Lift axle; Tyre profile left: 40%; Tyre profile right: 40% Empty weight: 9.850 kg Gcodpfxex Daztj Ag Dsa Carrying capacity: 16.150 kg GVW: 26.000 kg Registration number: BB-900-N

Condition: used, The Nagel Multinak S is a stitching machine designed for efficient and precise stitching tasks. Currently in storage and located in Germany, this model is available for transport under FCA delivery terms. With its double stitching heads and magazine stitcher, it offers high productivity and versatility in handling various stitching requirements. Format: Equipment: Gedpfx Aovfx Sqeg Doca double stitching heads magazine binder

Condition: used, mileage: 188,000 km, emission class: euro3, Year of construction: 2004, Year of manufacture: 2004 Gcedjx Dl Ncspfx Ag Dja

Condition: used, Year of construction: 2014, Year of manufacture: 2014 Price: On request Gjdpfx Agex Dl I So Dsca

Condition: used, mileage: 517,700 km, emission class: euro6, Year of construction: 2015, Year of construction: 2015 Gedpfsx Dl Ixsx Ag Djca