Used Air Tapping Machine for sale (115,321)

Condition: new, Year of construction: 2025, HOT AIR GENERATORS by wood model FABBRI F28 - F55CV - F85CV - F120CV - F240CV NEW machines in prompt delivery for heating sheds, warehouses, work and private environments Fuels: Wood - Chips - Paper - Cardboard CE marks: Yes volt. 220 single-phase ( model F28 and F55CV ) volt. 380 ( model F85CV - F120CV - F240CV ) 100% made in ITALY Kdsdpfxef H Hlrj Afieu CV models are equipped with an additional fan for smoke expulsion at the base of the flue model available : F28 . surface to be heated up to m2 100/150 F55CV . surface to be heated up to m2 300/350 F85CV . surface to be heated up to m2 450/500 F120CV . surface to be heated up to m2 650/700 F240CV . surface to be heated up to m2 1000 Hot Air Generators are suitable for the combustion of wood and all solid fuels allowed by law Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs. Exchangers 2 or 3 smoke revs. Inner side made of bright sheet metal for casing and insulation. Outer side made of zinc plated sheet metal. Frame made of painted profile. Feeding doors with refractory and extractable grates. Panels with refractory for pipes cleaning. Double suction centrifugal fans for hot air delivery running at low regime of turns and arranged on special elastic suspensions driven by one or more electric motors. Electric command and control panel - adjusting thermostat. Maintenance: Ordinary maintenance means the removal of the deposited ashes by opening the door. Once or twice a year, perform a general cleaning of pipes.

Condition: used, Table threading machine M1 - M10 Height adjustment via toothed rack and hand crank, motor 0,22+032 kW motor rpm 1420/ 2770 spindle Upm 480 - 580 Weight 100 kg Tapping chuck with key Kdodsda I E Djpfx Afiju Under table Connection cable with 16 A CEE plug

Condition: excellent (used), A good used Saxon 2 Hot Air Heat Sealing Machine on a Stainless Steel height adjustable column with a stainless steel mobile trolley - right to left handing Kodpfxswtgt Do Afijdu

Condition: good (used), - Pneumatic motor GAMOR - Reinforced am structure made of hard aluminum (parallelogram) - Table fixing column - Capacity: M2-M8 - Speed: 700 RPM - Working radius max: 1900mm - min: 200mm - Working air pressure: max: 7 bar - 840 lt/min - Weight: 18 kg Sold without the welding table (as seen in the pictures), only the machine, which can be mounted on a table or similar. Kdsdpfsw R S Srox Afiou

Year of construction: 2004, condition: good (used), High-quality air pad machine from a renowned manufacturer. Suitable for producing individually defined air-filled protective and filling elements made of PA and PE film as well as air cushions made of paper. Four air cushions are usually produced per work cycle. Various formats can be produced. 10 programs are available for storing several parameters. By calling up the corresponding program on the display, air cushions from 4 cm to 16 cm in length and with an individually defined degree of filling can be produced. The air cushion webs created in this way are wound into rolls using a motorized device. When the roll is full, the machine switches off automatically. The finished roll can then be removed manually and subsequently used as packaging material. The machine can be pushed using rollers and secured using brakes. Kdodpfekkcppox Afiju The machine can be demonstrated with power.

Condition: new, Year of construction: 2025, RST-LC1500 Advantages of the 2D Ultra-Wide Laser Cleaning Machine: A: 600–800 mm wide cleaning with ultra-wide coverage. B: Equipped with imported high-performance SOC controller. C: Various selectable 2D cleaning patterns; 14 languages available. D: Complies with European safety standards; triple safety mechanisms. Kdodpfx Afow Ix Dpeisu E: Equipped with multiple parameter databases tailored to various operating conditions. F: High-protection safety design. G: Easy maintenance and long-term stable operation. Machine Technical Specifications: Power supply 220V 50Hz/60Hz Output power ≤5.5 kW Operating temperature 10–40°C Cleaning area Cleaning width ≤ 800 mm Cooling method Air cooled Focal length 500/800/1000 mm Weight of laser cleaning head 900 g Laser safety class Class 4 Machine dimensions 640 × 330 × 620 mm Machine weight 46 kg Packaging dimensions 850 × 650 × 900 mm Package weight 88 kg Laser Generator Specifications: Parameter name Specification Laser generator model MFSC-1500M Power adjustment range 10%–100% Laser wavelength 1080 nm Modulation frequency 1–5000 Hz Output power instability ±1.5% Optical fiber cable length 10 m Machine Configuration: Component name Brand Description Machine body DPL Professional cleaning cabinet Laser generator MAX MFSC-1500M Laser head Hydraulic / Brand 2D Super Wide Angle Chiller system Bingyue 1500W-S Price: RST-LC 1500W (230V).....€9,500 Warranty: Two-year warranty on the laser source, One-year warranty on other machine components. No warranty on consumable parts. OPTION: TERMS AND CONDITIONS Training and Installation: 1 day €600 (incl. arrival and departure) Transport Costs: Air freight: €1,200 / Sea freight: €650 Delivery: 2–3 working weeks after payment receipt for air freight 5–6 weeks by sea freight Payment: 100% due upon order and before shipping (air cargo or by sea)

Condition: excellent (used), - Multifunction machine: PASTEURIZES - COOKS - COOLS - MIXES - EMULSIFIES - Model: R400 A SH - Dimensions (LxWxH): 600x750x1335 mm - Tank capacity: 40 litres - Maximum water pressure: 0.6 MPa - Refrigerant: R404A - Voltage: 400V / 3PH / 50Hz - Power: 5300 W - Year of manufacture: 2015 - Electronic controls - Semi-hermetic compressor - Air-cooled condenser Kedpfxswxu R Io Afiodu - Refurbished machine: The machine is prepared upon order; delivery and return times are agreed at that moment (please request price after refurbishment).

Condition: used, Bench drilling and tapping machine FLOTT type TBZ 15 GL Serial no. 32177027 Year of manufacture 1986 Drilling capacity 15 mm Spindle holder MK2 Ksdpodzp S Njfx Afijdu throat 195 mm Pinol stroke 80 mm Table size 275 x 200 mm Column diameter 70 mm Spindle speed 80 - 4500 rpm 18 steps Motor power 0.55 + 0.75 kW Mains connection 380 Volt, 50 Hz - 6 belt speeds from the motor and 2 belt speeds to the drill spindle 2 motor speeds - 3 guide cartridges 0.7mm + 0.8mm and 28G available - Drill head height adjustment via crank with rack and pinion on the column - Original metal base Space requirement L x W x H 700 x 350 x 1850 mm Weight approx. 150 kg good condition

Condition: ready for operation (used), There are two identical machines available, including documentation. Kjdpjm Rg R Asfx Afiedu

Condition: used, Year of construction: 1999, functionality: fully functional, feed rate X-axis: 75 m/min, Min. log diameter: 11 cm Max. log diameter: 75 cm Feed speed: 75 m/min Rotor speed: 222 rpm Rotor motor: 75 kW Feed motor: 2.2 kW Kdedpfjw Emhfox Afieu Hydraulic unit: 1.5 kW Infeed (to conveyor) and outfeed (wheel set) are included. In 2021, the rotor was completely replaced with a factory-overhauled rotor (invoice available). Control cabinets are not included! Year of manufacture is estimated to be the late 1990s. Videos of the machine can be sent.

Condition: good (used), High-quality air pad machine from a renowned manufacturer. Suitable for producing individually defined air-filled protective and filling elements made of PA and PE film as well as air cushions made of paper. Four air cushions are usually produced per work cycle. Various formats can be produced. 10 programs are available for storing several parameters. By calling up the corresponding program on the display, air cushions from 4 cm to 16 cm in length and with an individually defined degree of filling can be produced. The air cushion webs created in this way are wound into rolls using a motorized device. When the roll is full, the machine switches off automatically. The finished roll can then be removed manually and subsequently used as packaging material. The machine can be pushed using rollers and secured using brakes. Kdedpfxjkkcqqj Afieu The machine can be demonstrated with power.

Condition: used, Zwick Type: Z20 Technical Specifications: Stroke: 200 mm H x W x D 1037 x 385 x 180 mm Fmax: 20 kN Vmax: 125 mm/s Accessories: Kedev Rdtwopfx Afisdu Clip-On Extensometer 13.5 mm MFA 25 Extensometer (Temperature range up to +200°C) Computer + Software testXpert II V3.5 Air Conditioning Unit: Airtemp LKG-K-TK-50-040/150 Temperature range: -40°C to +150°C Temperature change: 1 K/min Refrigerant R404 5 kg Condition: Used Total weight: approx. 1500 kg Scope of delivery: (See image) (Subject to change or errors in the technical data. Information is subject to change.) Subject to change without notice!) We are happy to answer any further questions you may have over the phone. Written orders can be placed via email or fax.

Condition: excellent (used), Multifunctional machine: PASTEURIZES - COOKS - COOLS - MIXES - EMULSIFIES - Model: R400 A SH - Dimensions (LxWxH): 600x750x1335 mm - Tank capacity: 40 litres - Maximum water pressure: 0.6 MPa - Refrigerant gas: R404A - Voltage: 400V / 3PH / 50Hz - Serial number: 179342 - Year of manufacture: 2015 - Electronic controls Kjdpswxu Rzofx Afisdu - Semi-hermetic compressor - Air-cooled condenser - Refurbished equipment: The equipment is prepared when ordered; collection and return deadlines are agreed at the time (please request the price after refurbishment).

Condition: used, Pneumatic press, compressed air press BOSCH type Manufacturer no.: Year of manufacture: 1980 Pressing force: 18 kN = 1.8 t at 5 bar 15 kN = 1.5 t at 4 bar 12 kN = 1.2 t at 3 bar 8 kN = 0.8 t at 2 bar Kdedpfoh U Dtusx Afisu 6 kN = 0.6 t at 1.8 bar Throat depth: 100 mm Ram stroke: 70 mm Table size: 245 x 200 mm Ram face: Ø 45 mm Max. installation height: 235 mm Clamping pin bore: Ø 20 mm with clamping screw Compressed air requirement: 5 bar - Pressing force infinitely adjustable via pressure regulator - Pneumatic cylinder with ram adjustable in height by 90 mm - Pneumatic dual-hand control - Mounted on a metal frame with wooden boards Required floor space (L x W x H): 1050 x 700 x 1600 mm Weight of pneumatic press: 82 kg Weight including table frame: 140 kg In very good condition

Condition: ready for operation (used), Year of construction: 2021, A Vetron Typical hot-air welding machine for continuous seam sealing is available. Heating power: 700W, max. welding speed: 12m/min, material thickness: 0.2mm/20mm, air temperature range: 20°C-600°C, air volume: 50l-450l/min, weight: approx. 50kg. Documentation available. On-site inspection is possible. Kdedpjt Darlefx Afisu

Condition: used, Tapping machine, bench drill Kdjdpfx Ajb A Imxefisu -Spindle mount: B12 -Tap chuck: Tapmatic 30 X M1,5-M7 -Projection: 165 mm -Motor power: 0.25 kW -Weight: 60 kg

Condition: like new (used), Year of construction: 2023, Maxion BS36GL tapping machine. Year of manufacture 2023, including minimum quantity lubrication. Kedpfx Afewudq Neijdu

Condition: used, Year of construction: 2015, machine/vehicle number: 188786, Tapping machine Make: MAXION Model: BT 15 GL Ksdpevc A U Dofx Afisdu Year of manufacture: 2015 - workshop tested Machine no.: 188786 4 speeds 320, 560, 1,000 and 1,600 rpm. Accessories: - Lead screw device for jig-like threads - Lead screw change by means of quick coupling - Safety device against tool breakage - Program for single or continuous cycle - electronically controlled motor braking for single cycle - Electrical hood guard - electric chuck protection hood - 3m connection cable with 16A CEE plug - operating instructions incl. the following options: - Pull-out circuit After the safety device is activated device is activated, this enables the quill to be return the quill to the home position at the the push of a button. Without this device, the spindle must be the spindle must be turned back manually until the the home position.

Condition: good (used), max. threading capacity up to M 6 with guide cartridge throat 130 mm drive power 0,55 kW dimensions L x W x H approx. 350 x 650 x 750 mm weight approx. 90 kg Accessories / special features: - Threaded guide cartridges: 1 x pitch 0.5 mm 1 x pitch 0.6 mm 1 x pitch 0.7 mm 2 x pitch 0.8 mm 1 x pitch 1.0 mm - Various adjustable working cycles such as: Automatic, foot operation Kedpfenyh Tnex Afisdu Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), Thread cutter, tapping machine, tapping machine -Integrated reversing gear: with fast reverse -Nominal consumption: 230 watts -Max. Cutting capacity: M6 -Connection: 230 volts Kodpfsb A N Ihsx Afiodu -Weight: 2.5 kg

Condition: used, Thread cutter, tapping machine, tapping machine -Nominal consumption: 280 watts Ksdpfx Afjd R Nfqoisdu -Max. Cutting capacity: M8 -Connection: 220 volts -Dimensions: 290/200/H60 mm -Weight: 2.1 kg

Condition: used, Thread cutter, tapping machine, tapping machine -Integrated reversing gear with fast reverse -Nominal consumption: 230 watts -Max. Cutting capacity: M6 -Connection: 230 volts -Weight: 2.3 kg Kodpscm I T Uofx Afiedu

Condition: used, Thread cutter, tapping machine, tapping machine Kodeb A N Iijpfx Afijdu -Integrated reversing gear: with fast reverse -Nominal consumption: 280 watts -Max. Cutting capacity: M8 -Connection: 230 volts -Weight: 2.5 kg

Condition: used, Thread cutter, tapping machine, tapping machine -Integrated reversing gear: with fast reverse -Nominal consumption: 230 watts -Max. Cutting capacity: M6 -Connection: 230 volts -Weight: 2.5 kg Kdsdpfxob A N Ike Afiju

Condition: used, Thread cutter, tapping machine, tapping machine -Manufacturer: Fein, tapping machine type ASg 636 -Rated consumption: 280 watts -Max. Cutting capacity: M8 Kjdpfx Afeb A N Ibeisdu -Speed: 450 rpm -Connection: 220 volts -Number: 2x tapping machine available -Price per piece -Dimensions: 330/150/H80 mm -Weight: 2.3 kg