Used Air Hammer for sale (23)

Condition: new, Year of construction: 2024, functionality: fully functional, power: 3 kW (4.08 HP), pivoting range: 90 °, rotational speed (max.): 10,000 rpm, rotational speed (min.): 3,000 rpm, Equipment: CE marking, documentation/manual, new, unpacked table router with spindle tilting, diameter 30 mm. Sliding carriage at the front side. Speeds: 3000, 6000, 8000, 10000 rpm Lhedey El T Tjpfx Afaef

Condition: like new (used), Year of construction: 2020, For sale is a demonstration machine: Hammer K3Winner Comfort panel saw with a cutting width of 300 mm. The machine was only briefly used for demonstration purposes in-house and can thus be considered as new, with full warranty/guarantee. Technical specifications: - Sliding table 2000 mm - Extension table 1100 mm - Mitre fence 1300 mm - Angle stop index - Saw blade tiltable 90–45° - Max. cutting height 104 mm with 315 mm saw blade diameter - Cutting width 800 mm - 5.5 HP (4 kW) motor, 400 Volt - Year of manufacture: 2020 The panel saw is located in A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Related terms: saw, circular saw, Hammer, panel saw, panel Reference: R-D1618-10 Lhsdpfjy Akdrjx Afaef

Condition: new, power: 90 kW (122.37 HP), Year of construction: 2026, A double rotor hammer crusher is a type of crusher in which two rotors are mounted on a single shaft, combined to form a spinning rotor. The double rotor arrangement enhances the crushing capabilities and provides a more efficient and reliable crusher design compared to single rotor crushers. Here are some key features and aspects of a double rotor hammer crusher: 1. Two Rotors: As the name suggests, the crusher has two rotors that rotate in opposite directions on a common shaft. This dual rotor configuration allows for increased impact and crushing power. 2. High Capacity: The dual rotor design enables the crusher to handle larger feed sizes and higher capacity compared to single rotor crushers. It is suitable for crushing materials with high hardness and large sizes. 3. Versatility: Double rotor hammer crushers are versatile and can be used in various applications, including the reduction of limestone, gypsum, coal, and other similar materials in the mining, cement, and building materials industries. 4. Impact Crushing: The primary mechanism of crushing in a double rotor hammer crusher is through the impact of the hammers against the material. The material is fed into the crusher, and the high-speed rotating hammers impact and shatter the particles. 5. Adjustable Gap Settings: These crushers often have adjustable gap settings between the rotors and the impact bars, allowing control over the final particle size. Lhedoq Nf Enepfx Afajf 6. Durability: The robust design of the double rotor hammer crusher makes it durable and capable of handling tough materials and continuous operation. 7. Reduced Wear: The dual rotor arrangement can help distribute wear more evenly across the hammers and other wear parts, potentially extending the overall lifespan of the crusher. Typical Technical Specifications While exact numbers vary by manufacturer, these are the standard ranges for industrial models: Model (Rotor Size),Max Feed Size,Output Size,Capacity (t/h),Total Motor Power 600 × 400,≤110 mm,≤3 mm,10 – 15,18.5+18.5 kW 800 × 600,≤120 mm,≤3 mm,40 – 50,45+45 kW 800 × 800,≤180 mm,≤3 mm,50 – 60,45+55 kW 1000 × 800,≤180 mm,≤3 mm,70 – 80,75+55 kW 1100 × 1000,≤200 mm,≤3 mm,70 – 100,90+110 kW 1400 × 1200,≤200 mm,≤3 mm,90 – 110,132+160 kW For more details about double stage hammer crusher, or double rotor crusher, welcome to leave us a message, our team will get back to you at the earlist.

Condition: like new (used), functionality: fully functional, Year of construction: 2010, As new. Tel & WhatsApp: 00491728909019. 07907 Schleiz – Industriestr. 28 – Germany Ljdpfsy D Ah Eox Afashf

Condition: used, Year of construction: 2014, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, planing width: 410 mm, rotational speed (max.): 6,000 rpm, total length of planing tables: 1,800 mm, overall weight: 355 kg, number of planer blades: 3, planer shaft diameter: 72 mm, - Year of manufacture: 2014 - Not repainted - After technical inspection - Operating manual, technical documentation (DTR) TECHNICAL SPECIFICATIONS: - Planing width: 410 mm Lhedpfx Afew H R I Soaof - Number of knives: 3 - Rotational speed: 6000 rpm - Cutterblock diameter: 72 mm SURFACE PLANER: - Planing width: 410 mm - Max depth of cut: 4 mm - Jointer table length: 1800 mm - Fence length: 150 x 1100 mm THICKNESSER: - Planing width: 404 mm - Table length: 600 mm - Planing height min/max: 4/225 mm - Feed speed: 6 m/min - Motor power: 4 kW - Voltage: 3×400 V - Extraction port diameter: 100 mm Machine overall dimensions: - Length: 1950 mm - Width: 800 mm - Height: 1090 mm - Weight: 355 kg

Condition: used, functionality: unexamined, Year of construction: 2018, Plant for endogas generation Year of manufacture: 2018 Net price (new): €103,500.00 Manufacturer: Hammer GmbH Model: Larus ENDOGEN-40-1.05-E incl. dew point control or cp control fully automatic power control in the range of 50–100% soot filter in duplex version Lodpfxex An Rmo Afaehf

Condition: new, power: 55 kW (74.78 HP), Year of construction: 2026, A hammer crusher is a machine that uses high-speed rotating hammers to crush and break materials into smaller pieces. It is commonly used in various industries, including mining, cement, construction, metallurgy, and chemical processing. The basic principle of a hammer crusher involves a central rotor with hammers or blades that rotate and impact the material being crushed against a hard surface. Here are the key features and components of a typical hammer crusher: 1. Rotor: - The rotor is a central component of the hammer crusher. It usually consists of a shaft with multiple discs or hammers attached. - The rotor's rotation causes the hammers to swing outward, impacting the material. 2. Hammers: - Hammers are the striking or crushing elements attached to the rotor. They can be fixed or pivotally attached. - The material is crushed as the hammers impact it, generating kinetic energy. 3. Casing or Housing: - The casing or housing encloses the rotor and hammers, providing structural support and safety. - It also serves to contain the crushed material and direct it to the desired discharge point. 4. Grate Bars or Screens: Lhodpfx Aoq I Nxdefajf - Positioned at the bottom of the crusher casing, grate bars or screens control the size of the crushed material by allowing smaller particles to pass through while keeping larger ones inside for further crushing. 5. Impact Plate: - Located near the bottom of the crusher, the impact plate absorbs the impact energy generated by the hammers and prevents excessive wear on the casing. 6. Drive System: - The hammer crusher is powered by a motor connected to the rotor through a drive belt or coupling. - The motor provides the necessary power to rotate the rotor, enabling the hammers to crush the material. 7. Adjustable Discharge: - Some hammer crushers feature an adjustable discharge, allowing users to control the size of the crushed material by adjusting the gap between the impact plate and the hammers. 8. Applications: - Hammer crushers are used for crushing a variety of materials, including coal, limestone, gypsum, aggregates, and various minerals. - They are commonly employed in the mining industry for primary and secondary crushing of ore. - In the cement industry, hammer crushers are used to crush limestone and other materials before they are mixed into the raw meal. 9. Maintenance and Safety: - Regular maintenance is essential to ensure the efficient operation of a hammer crusher. This includes checking and replacing worn hammers, inspecting the rotor, and lubricating moving parts. - Safety features, such as access doors and safety guards, are typically incorporated to prevent accidents during operation and maintenance. Technical Specifications (Typical MINGYUAN Series) Model Category,Max Feed Size,Capacity (t/h),Motor Power (kW),Rotor Speed (rpm) Small (PC-400), ≤100mm, 5 – 10, 11, "1,000" Medium (PC-800),≤200mm, 20 – 50, 55, 750 – 900 Heavy (PC-1200),≤350mm, 80 – 110, 132 – 160, 600 – 750 Heavy Hammer,"≤1,200mm", "500 – 1,000+ ","400 – 1,000" ,Variable

Condition: new, Year of construction: 2023, Hammer Mill with electrical box and cyclone filter for sale. The machines has a CE certificate. Technical parameters: Electric motor power: 45Kw Lhedjxf Nw Hspfx Afasf Capacity: 1500-2000kg/hour Machine size: 1750mmx900mmx1550mm. Weight 1300kg. Located Locally in Hungary (EU)

Condition: excellent (used), Year of construction: 2019, For sale is a used Hammer B3Winner Comfort circular saw and router with a cutting length of 2000 mm. The machine is in very good condition and has been serviced and inspected by our specialist staff. (Fully functional) Technical specifications: Lsdpfxjv Sbpxj Afaehf - Circular saw and router tiltable 90-45° - Sliding table 2000 mm - Outrigger table with degree grid index - Miter stop 1300 mm - 4 routing speeds: 3000/6000/8000/10000 rpm - Cutting width 800 mm - 2 motors, each with 5.5 HP (4 kW) 400 volts - Year of manufacture 2019 The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: circular saw, milling machine, milling machine, combined machine, combination machine Reference: R-L0AHG

Condition: like new (used), Year of construction: 2022, For sale is a demonstration unit of a Hammer A3-31 jointer-thicknesser with a planing length of 1400 mm. The machine is in like-new condition. Technical data: - 3-knife cutterhead - Planing width: 310 mm - Planing length: 1400 mm - Max. workpiece height: 230 mm - Motor power: 3 kW - Extractor connection Ø 120 mm - Year of manufacture: 2022 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Lsdpfxox U U Eke Afajhf Related terms: jointer, thickness planer, planer machine, surface planer, thicknesser Reference: R-A0117

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, For sale is a used Hammer band saw N4400 with a cutting width of 420 mm. The saw is in very good condition and has been reconditioned and checked by our specialist staff. (Fully functional) Technical data: - Roller diameter 440 mm - Cutting height 310 mm - Cutting width 420 mm - Cast table swivels 90-45° - Band length 3980 mm - 2.6 kW / 3.5 HP motor - Year of manufacture 2021 Ljdpfxjv Adths Afashf - Machine number 53.03.703.21 The band saw is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: band saw, saws, saw, band Reference: R-L054O

Condition: excellent (used), Year of construction: 2022, For sale is a used Hammer A3-31 planer-thicknesser with a planing width of 310 mm. The machine is in very good condition and has been reconditioned and checked by our specialist staff. (Fully functional) Lhsdpfx Afjv Ianxoaof Technical data: - Planer-thickness width 310 mm - 3 knife shafts (reversible knives) - Thickness height 4-225 mm - Dual foldable planer tables - Pivoting planer stop - 2.9 kW / 4 HP motor / 400 volts - Year of manufacture 2022 The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: planer, thicknesser, planing machine, planing, thicknessing Reference: R-AT0YY

Condition: excellent (used), For sale is a used Hammer A3-41 Silent Power surface planer and thicknesser with a jointer length of 1800 mm. The machine has been checked by our specialized staff and is in very good condition. Technical data: - Silentpower spiral cutterhead - Planing width 410 mm - Jointer length 1800 mm - Max. clearance 230 mm Lhedpfewqq Dhex Afajf - Motor power 4 kW / 5.4 HP - Suction connection Ø 120 mm - Year of manufacture 2022 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Related terms: jointer, thickness planer, planer, jointing, thickness Reference: R-A0117

Condition: like new (used), Year of construction: 2023, For sale is a used Hammer A3-41 planer-thicknesser with a planing length of 1800 mm. The machine has been checked by our specialist staff and is in mint condition. Technical data: - 3 system knife planer shaft - Planing width 410 mm Lodpfx Asv Dah Dofaehf - Planing length 1800 mm - Max. passage 230 mm - Motor power 4 kW / 5.4 HP - Extractable Ø 120 mm - Year of manufacture 2023 - Mint condition The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Related terms: planer, thicknesser, planing machine, planing, thicknessing Reference: R-A0117-1

Condition: like new (used), Year of construction: 2023, For sale is a demonstration unit Hammer K3 Winner Comfort panel saw with a cutting length of 2000 mm. The machine is in mint condition. Ljdjvxrurjpfx Afaohf Technical data: - Sliding table: 2000 mm - Outrigger table: 1100 mm - Mitre fence: 1300 mm - Angle indexer - Saw blade tiltable 90-45° - Max. cutting height: 104 mm with blade diameter 315 mm - Cutting width: 800 mm - 5.5 HP (4 kW) motor, 400 Volt - Year of manufacture: 2023 The panel saw is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: saw, circular saw, Hammer, panel saw, sliding table saw Reference: R-A0117

Condition: excellent (used), Year of construction: 2020, For sale is a used Hammer C3-31 4-function combination machine with a cutting length of 1300mm. The machine is in very good condition and has been serviced and inspected by our specialist staff. Lodsxxi Dtjpfx Afaohf Technical data: - Cutting length: 1300mm - Cutting width: 650mm - Cutting height: 103mm - 4 milling speeds - Directional switch - Silentpower spiral cutter block - Planing length: 1400mm - 3 motors, each 3kW - Year of manufacture: 2020 The machine is located in A-5431 Kuchl and can be inspected by appointment during our business hours. Subject to prior sale! Related terms: combination machine, combined machine, planer, thicknesser, thicknessing machine, circular saw Reference: R-L0B8S

Condition: like new (used), Year of construction: 2024, For sale is a used Hammer A3-41 planer-thicknesser with a planing length of 1800 mm. The machine has been inspected by our specialist staff and is in mint condition. Technical specifications: - Planing thickness width 410 mm - 3 knife blocks (reversible knives) - Dual folding planing tables - Planer stop pivots 90-45° - Thicknessing height 4-225 mm - 5.5 HP (4 kW) motor / 400 volts - Year of manufacture 2024 - Machine number 52.02.285.24 Lhsdpsv Scx Usfx Afasf The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: planer, thicknesser, planer, planing, thicknessing Reference: R-L0J2U

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, For sale is a used Hammer C3-31 4-function combination machine with a cutting length of 1150 mm. The machine is in very good condition and has been refurbished and inspected by our qualified personnel. Technical data: - Cutting length: 1250 mm - Cutting width: 900 mm - Cutting height: 103 mm - 4 spindle speeds - Directional switch - 3-knife cutter block Lhsdpfjxdknwex Afaef - Planing length: 1400 mm - 3 motors, each 3 kW - Year of manufacture: 2020 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: combination machine, combined machine, planer, thickness planer, thicknessing machine, circular saw Reference: R-B18YQ

Condition: like new (used), For sale is a Hammer edge sanding machine HS950, with a belt length of 2515 mm. The machine is in good condition and has been inspected by our specialist staff. - Belt length: 2515 mm - With oscillation motor - Tiltable 0 - 90° - Motor power: 2.2 kW / 3 HP - Year of manufacture: 2024 - Demonstration machine The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Info Tel. 06244-20299 Related terms: edge sanding machine, sanding machine, surface finishing Lhodpow Hf D Iefx Afaef Reference: R-A0117

Condition: new, Year of construction: 2022, I sell the FELDER HAMMER F3 bottom milling machine. Year 2022. The machine is practically new. Main spindle motor 4KW Spindle tilting 0-45° Optional spindle locking system using imbus key from above. 4 speed settings, variable on the pulley 3000-6000-8000-10,000 rpm. The milling cutter set in the picture is included in the price. Fully working. Including full documentation. Available immediately. Lhsdpfjwg Ec Djx Afaef

Condition: ready for operation (used), Year of construction: 1967, functionality: fully functional, Very well-maintained double-pressure press DM2 by Heuer Hammer. Immediately ready for use. Lhedpexywkwjfx Afaef

Condition: ready for operation (used), Year of construction: 1963, functionality: fully functional, Very well-preserved double-pressure press DM3 from Heuer Hammer. Immediately ready for use. Ledjxywlnopfx Afajhf

Condition: ready for operation (used), functionality: fully functional, Very well-maintained dual-pressure press DL5 from Heuer Hammer. Immediately ready for operation. Lsdpfx Asxzft Nsfaehf