Used Adam Engineering for sale (20,439)

Condition: like new (used), Refrigeration pack bought new in 2023 and never used. Cost almost £2 million, this was installed to run a spiral freezer and other machinery but due to the company going bankrupt, it was never commissioned. Extremely efficient to run compared to conventional systems. Kodpfx Afjwcwbqeionc

Condition: like new (used), functionality: fully functional, machine/vehicle number: 19-1134P, Year of construction: 2020, operating hours: 4 h, load capacity: 1,500 kg, Equipment: CE marking, clamp, gripper hydraulics, Manufacturer: APE Engineering GmbH Type: Universal Pallet Truck UHW 1500-27/E-Tele-SO Year: 2020 Voltage: 24V Lifting height: approx. 3300 mm (center of rotary device) Load capacity: 1500 kg Operating hours: 4 h (readout) This unit is designed for use on level ground for lifting, transporting, gripping, and rotating crucibles. Crucibles can be picked up and swiveled. Equipment: - 360° hydraulic rotary device - Initial lift approx. 100 mm - Hydraulic clamping device - Integrated 230V charger - 24V tray battery from Hawker Scope of delivery: Kodpfx Aow Izrcsfienc - Universal pallet truck - Complete documentation including circuit diagrams and EC Declaration of Conformity Dimensions: Width: approx. 1650 mm Height: approx. 2300 mm Length: approx. 1950 mm without attachment and approx. 2400 mm with attachment The machine can be demonstrated on site. All information subject to change. Intermediate sale reserved. The item is sold without any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller, nor to any injury to life, limb, or health.

Condition: good (used), Used agitator tank with insulation on castors Electric heating does not work! Item number: 10784 Last use: Pharmacy Volume: 300 liters Type: Upright on 4 castors Material (wetted parts): 1.4571 / AISI316 Version: with insulation Operating pressure according to type plate: +0.5 bar Max. Max. operating temperature: + 95 °C Tank dimensions: Manhole: 410mm Inner diameter: 700mm Outer diameter: 800mm Height of the feet: 870mm Total height: 1700mm Total width: 870mm Total length: 950mm Cylindrical height: 650mm Materials: Interior: 1.4571 / AISI316 External parts: 1.4301 / AISI304 Equipment: Type plate: Yes Outlet diameter: DN25 Distance drain to floor: 365mm Propeller agitator Ksdpfxsrl Rtuo Afisnc Empty weight: 184Kg

Year of construction: 2022, condition: new, Kairos Engineering's energy recovery system is a technology that recovers the heat contained in the industrial hot wastewater, to transfer it to other water to be put back into the production process. The transfer takes place by means of shell and tube heat exchangers in which the two fluids, which never meet directly in order not to undergo contamination, they are sent against the current, that is, one against the other. Indicative savings of 30%. Knodpfx Afeh Akv Heioc

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: BDG300 PV2 SP LA, Thread-Cutting/Machining Machine Oberburg – Precision Series Production Kodpfx Ajw E Hfkefienc Robust, fully automatic machining machine for thread cutting, cutting to length, or feed operations. Swiss quality from Oberburg Engineering (Guggisberg & Keller AG). Equipment: • Complete control with reset, start, feed • Sawing/milling module • Chip tray, clamping system • Change gears for precise machining (Morse 5+5) Ideal for: series production, screw production, metalworking Condition: complete, well-maintained, tested

Condition: excellent (used), Primus Engineering Type: DST 350 This test device was designed to carry out IP protection class tests “dust” according to e.g. DIN 40050 Part 9 and DIN EN 60529. The test device is intended for testing technical components under the influence of dust and negative pressure within the limits specified in the technical data. Operation / HMI Control panel with screen and buttons Manual controllers Stored test sequences Integrated vacuum circuit with flow measurement Technical data: Total electrical output: Max. 5 KW Connection voltage: 400V/50HZ 3-Ν/ΡΕ (16AEEC socket) Dimensions: Width approx. 920 mm Depth approx. 710 mm Height approx. 1,770 mm Dimensions of test chamber: Width approx. 700 mm Depth approx. 650 mm Height approx. 770 mm Volume approx. 350 I Mass: approx. 200 kg Vacuum: 0 to -100 mbar Suction air flow: 0 to approx. 5 l/min Working climate range: Temperature: +12 °C to +30 °C Humidity: 25% rel. H. to 75% rel. F., non-condensing Protection class tests according to DIN 40050 Part 9 and DIN EN 60529 (VDE 0470 Part 1) Dust test: Dust-protected ΙΡ5Χ and IP5KX Dust-tight ΙΡ6Χ and IP6KX with and without vacuum Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone. Kedport U Nujfx Afionc

Year of construction: 2015, condition: good (used), Able Engineering 500L Tank Chocolate Tank Knjdpfjwwp Tzjx Afijc 2015, Stainless, 500L capacity, jacketed mixing tank, Top mounted agitator, central bottom discharge into jacketed Rotan Pump all mounted on skid with load cells, 3Ph

Condition: like new (used), Year of construction: 2018, functionality: fully functional, SPECIFICATION Ksdpfx Aow D Dt Ajfionc • Diverse solutions for woodworking: The "F" series throughfeed CNC machine offers unique solutions for modern woodworking • Zero setup time: The toolhead also functions as a tool magazine, reducing changeover times • All drilling operations performed in a single cycle • Load capacity up to 70 kg, enabling processing of larger/thicker elements such as kitchen countertops • Software control via machine control panel or remote controller • Machine manufactured in compliance with CE standards Working dimensions: X-axis: min. 240 mm, max. unlimited Y-axis: min. 80 mm, max. 1200 mm* Z-axis: min. 10 mm, max. 40 mm TECHNICAL DATA • 12 vertical drilling spindles • 4 + 4 horizontal drilling spindles (front/rear, TH1–TH4) • Independent milling unit with ER25 collet, max Ø 16 mm, 2.2 kW, 18,000 rpm • Front/rear panel edge sensors for precise sizing • "Unica" version system reduces table gap from 240 mm to 30 mm for milling, allowing for the removal of small parts • Industrial PC, 160 GB drive, 2 GB RAM • 14" color screen with CD drive, keyboard, and mouse • USB, Ethernet, and serial ports • Operating system: Windows 7 Professional • CNC automation software: SW-FW ALBATROS • CAD software: TPA • Machine dimensions: approx. 2150 × 1330 × 1560 mm • Weight: approx. 1150 kg • Operating pressure: 6 bar • Feed speed: 25 m/min with material, 40 m/min without material • Power supply: 400 V, 50 Hz, 3-phase (TPA) • Tools not included in the price

Condition: good (used), functionality: fully functional, Maggi Best 700S Saw Kedpfjw Dp Tzsx Afienc Refurbished machine Can be seen in operation at our premises Price includes loading Transport and installation available at extra cost.

Year of construction: 2022, condition: new, The Cyclonic Dust Separator (cyclone) exploits the centrifugal and gravitational force to carry out the dedusting of the air flow. The tangential entrance of the machine forces the air to whirl around inside the structure. The contained dust loses speed due to friction with the external surface of the system and is separated thanks to the gravitational effect. The air is released in the central part in correspondence with a counter-duct which, creating a depression, attracts the air inside and allows it to escape. Kodpoihu T Tsfx Afisnc

Year of construction: 2018, condition: new, Electrically heated circulating air furnace (horizontal air flow) Kjdpfx Afodt R Uusienc max. temperature: 550ᵒC useable dimensions (w x h x d): 900 x 1300 x 1800 mm charge weight: 800 kg gross heating power: 72 kW circulation fan: 1 x 7,5 kW

Condition: excellent (used), IVA Engineering Type: M5386 Knjdpfxed Nfrls Afijc Environment and stability chamber Dry Hot Air Test Chamber Dry hot air test chamber Rated voltage: 415V AC/20A Dimensions: 90.55x78.74x90.55 in - 2204.60 lb 2300x2000x2300 MM - 1000 KGS Interior Dimensions: (height x width x depth): approx. 1950 x approx. 1230 x 1510 mm Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 1 h, functionality: fully functional, saw blade diameter: 400 mm, cutting height (max.): 125 mm, cutting width (max.): 865 mm, input voltage: 400 V, Year of manufacture 2022. Display machine from a demonstration center with slight signs of wear. Item number MU 5650190-SP1 Max. cutting width 865 mm x 20 mm Saw blade diameter 400 mm Kodpfswa Akxjx Afienc Cutting height 125 mm at 90° Motor power 3.0 kW - 400 V Table dimensions 1970 mm x 1285 mm

Condition: repair required (used), feed hopper / buffer hopper Kjdpfx Aewydmnsfisnc

Condition: used, Technical data for the stacking system: Manufacturer Schneider Engineering AG Type Destacking machine 3544 Year of manufacture 1998 Knsdpjwrpa Dofx Afisc Connected load 6.8 kW Hydraulic oil tank 100 l Working pressure 100 bar Table load 300 kg Machine weight 2300 kg Type: 3553 restacking machine Year of manufacture: 1998 Connected load: 6.8 kW Hydraulic oil tank: 100 l Working pressure: 100 bar Table load: 300 kg Machine weight: 2250 kg Note: The system is still assembled and can be viewed while powered up. Scope of delivery: A system unit consisting of a destacking and restacking machine with table and conveyor technology. The lifting table as a feeding machine at the beginning of the system, see red marking, is not included in the scope of delivery. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available in German. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Year of construction: 2010, condition: excellent (used), Deflector spray scrubbers are an air pollution control technology. They are very similar to spray towers in design and operation. However, in addition to using the energy provided by the spray nozzles, baffles are added to allow the gas flow to atomize liquid as it passes over them. Knedsk D Hd Ajpfx Afiec

Condition: excellent (used), pure engineering Type: pureGMC18 System for manual weighing processes Climatic chamber for highly sensitive weighing processes with ultra-microbalances. The weighing chamber is specially designed for the gravimetric determination of particulate emissions in exhaust gas analysis and fulfills the normative requirements of the environmental authorities. All necessary climate control components are integrated. In combination with the HEPA filter, a contamination-free and precisely and precisely conditioned weighing and storage area for the filters is ensured. Features: Precise temperature and humidity control Weather station (p, t, h) for buoyancy correction Dew point mirror (optional) Vibration-decoupled granite for low-vibration installation of an ultra-microbalance Ksdpfx Afelddmzoijnc Ionization device against static charge Flow protection for shielding the load cell Touch panel for intuitive operation Ethernet interface for process data exchange Interior with sockets, earthing bolt Advantages: Meets normative requirements for particle weighing according to: ECE-R83 (light duty), ECE-R49 (heavy duty), EPA1065 (U.S. Environmental Protection Agency) Tested, ready-to-connect design Designation pureGMC18 Temperature 22°C ± 1 K Humidity 45%r.H ± 3% Dimensions W/D/H 1,800/800/1,980 mm Clean room class 5 (ISO14644-1) Power supply 400V, 15A 50/60 Hz Weight: 650 kg Condition: second-hand / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 2010, condition: good (used), functionality: fully functional, machine/vehicle number: -, Wet Scrubber (fume abatement) with floating balls complete with pump and centrifugal fan , two booster tanks , chimney with sampling scale . Flow rate about 40,000 m3/hour . Ksdpfeuihz Djx Afisnc

Condition: excellent (used), Vision Engineering Specifications of the microscope from Vision Engineering: Eyepiece-less Three-dimensional viewing x3.5 - x120 stereo zoom magnification Features: Optical type: Application laboratory, inspection, for research purposes, forensic medicine, for dental laboratory, for welding work Observation technology 3D Configuration Desktop device Options and accessories USB camera, zoom Magnification Min: 3 unit Max: 240 unit Description: Lynx EVO is designed to increase productivity and efficiency through superior ergonomics. Regardless of the challenge - inspection, rework or refurbishment high resolution and high contrast 3D stereo images, you will work more comfortably and and more concentrated. Magnifications from 2.7x to 240x make it ideal for a wide range of applications. Kodpjtqnkljfx Afienc Greater efficiency: Lynx EVO offers improved hand-eye coordination, more working space for tools and better peripheral vision for easy interaction with the wider working environment and transforms the way you work. With no eyepieces to adjust, you can easily share between multiple users, to get maximum return on your investment. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 2022, condition: new, The Venturi Scrubber is a device that generally consists of a centrifugal part capable of separating the solid parts from the liquids and of a Venturi column that narrows in the middle section to vary the pressure and therefore allow the polluting solid particles to fall through the fumes. This type of Scrubber is used for the removal of dust and pollution present in corrosive and dangerous industrial gases. Venturi Scrubbers are used in the abatement of particulates that come from coal, oil or wood boilers, the textile industry but also for emissions from the chemical industries, wood industries, paper mills, etc. Knedpfx Aoh Atp Ajfijc

Year of construction: 2022, condition: new, The packed bed wet scrubbers is designed to remove gaseous or vaporous pollutants from an air stream. The process is accomplished by contacting the contaminated air stream with a scrubbing liquor that absorbs or chemically reacts with the pollutants. The cleaned air is then discharged to the atmosphere and the contaminated scrubbing liquor is either disposed of in the approved can be recovered and reused in the original on other processes. In the vertical counter-current design, gas flows upward while scrubbing liquid flows down through banks of sprays. The absorption of gases takes place in the scrubbers random packing section and scrubbing liquid is introduced into a liquid through or spray distribution system. A high-efficiency mist eliminator removes entrained liquids. Clean gas go directly in the atmosfere . Knodpfjh Apkdox Afijc

Year of construction: 2022, condition: new, machine/vehicle number: XXXX, Baffle spray scrubbers are a technology for air pollution control. They are very similar to spray towers in design and operation. However, in addition to using the energy provided by the spray nozzles, baffles are added to allow the gas stream to atomize some liquid as it passes over them. Ksdsh Akn Uepfx Afisnc

Year of construction: 2022, condition: new, Electrostatic filters are considered the most sophisticated technology, currently available, for the collection of solid and liquid particles existing in an exaust air flow. The electrostatic uptake allows the separation of any particle from the air, regardless of its size. In fact, the agglomeration of very fine particles is possible with efficiencies up to 99% on atmospheric dust according to the EN 779 method.The use of electrostatic filters therefore allows to obtain air completely free of dust , smoke, spores, bacteria, pollen ecc . The main advantages deriving from the use of electrostatic filters are: • High filtration efficiency Knedpfx Afsh Aku Tsijc • Low pressure drops • Low operating cost • Limited maintenance interventions • High operating reliability

Year of construction: 2018, condition: like new (used), Deflector spray scrubbers are an air pollution control technology. They are very similar to spray towers in design and operation. However, in addition to using the energy provided by the spray nozzles, baffles are added to allow the gas flow to atomize liquid as it passes over them. Kodsinbi Sspfx Afijnc

Year of construction: 2022, condition: new, The fabric filter unit consists of one or more insulated compartments containing rows of fabric bags in the shape of round, flat or shaped tubes, or pleated cartridges. The particles contained in the exhausted air move along the surface of the bags, then radially through the fabric. The particles are retained on the upstream face of the bags and the clean gas stream is discharged to the atmosphere. The filter is operated cyclically, alternating with relatively long filtering periods and short cleaning periods. During cleaning, the dust that has accumulated in the bags is removed. Fabric filters collect particles ranging in size from submicron to several hundred microns in diameter with efficiencies generally greater than 99 or 99.9 percent. The layer of dust, or cake of dust, collected on the fabric is primarily responsible for such high efficiency. The cake is a barrier with tortuous pores that trap particles. Knjdpfxeibd Aze Afiec