Used 3 Axis Machining Centre for sale (81,209)

Condition: good (used), Year of construction: 2005, Hurco - VMX30 - 3-Axis Machining Center Year of build 2005 Serial number H-30516 Travel x-axis 760mm Pgsdeu A Dnpepfx Adnew Travel y-axis 510mm Travel z-axis 510mm T-slot fixture table size W 510mm T-slot fixture table size L 1510mm Engine power (kW) 11kW Machine weight 4800kg

Condition: good (used), Year of construction: 2004, Ref. -No.: 10387 Manufacturer: MATEC Type: 30 L / 6000 Year of construction: 2004 Type of control: CNC Control: HEIDENHAIN iTNC 530 Storage location: Halberstadt Country of origin: Germany Pgedoxvw E Hjpfx Adnsw X-Travel: 6000 mm Y-Travel: 800 mm Z-Travel: 600 mm Spindle Taper: SK 50 Table Load: 3000 kg Max. Workpiece Weight: 800 kg Spindle Speed: 20 - 9000 RPM Max. Torque: 165 Nm Main Drive: 60 kW Weight Of The Machine Ca.: 24 t

Condition: ready for operation (used), Year of construction: 2005, Offered is a Geiss 5-axis CNC milling machine. Travel ranges X/Y/Z/B/C 3000mm/1200mm/750mm/365°/520°, spindle GEISS ER45, max. speed: 40000rpm, power: 6kW, total weight approx. 5000kg, dimensions X/Y/Z approx. 6000mm/3700mm/2700mm. The machine is equipped with a detachable noise protection enclosure. Viewing by appointment possible. Pgsdpfxjxxbags Adnjw

Condition: good (used), Year of construction: 2014, operating hours: 48,000 h, functionality: fully functional, machine/vehicle number: 2080233, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 400 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, CNC Control SIEMENS 840D Electrical Connection Connection voltage: 3 × 400 V / 50 Hz (grounded) Network type: TN-S or TN-C system Total connected load: 133 kVA Power factor: 0.6 Fuse rating: 190 A gG (5 s) Weight Operating weight of machine: 20,000 kg Transport weight: 16,000 kg Tool Magazine Tool change system: Pick-up system Tool management: Fixed-coded tool positions Capacity: 84 tools (2 × 42) Maximum total tool weight: 350 kg Feed Drives Drive type: Three-phase synchronous motors Linear measuring system X/Y/Z: Direct, absolute X-Axis Rapid traverse: 100 m/min Max. acceleration: 12 m/s² Kv factor: 7 Pgjdext D Ebjpfx Adnew Peak force: 10,000 N Continuous force: 5,000 N Positioning accuracy: Tp = 0.008 mm Y-Axis Rapid traverse: 100 m/min Max. acceleration: 10 m/s² Kv factor: 7 Peak force: 10,000 N Continuous force: 5,000 N Positioning accuracy: Tp = 0.008 mm Z Axes (Z1, Z2) Rapid traverse: 100 m/min Max. acceleration: 20 m/s² Kv factor: 7 Peak force: 2 × 5,000 N Continuous force: 2 × 2,500 N Positioning accuracy: Tp = 0.008 mm Main Spindles Spindle arrangement: Horizontal, twin spindles side by side Motor spindles, liquid-cooled, synchronous technology Spindle diameter: 40 mm Tool interface: HSK-A63 Lubrication: Minimum quantity lubrication (oil) Mechanical clamping force: > 18 kN Wear limit: 16 kN Speed range: 1 – 17,500 rpm Acceleration time: 0.7 s Power: 2 × 35 kW at 4,200 rpm (40% duty cycle) Rated power: 2 × 26 kW at 4,200 rpm Torque: 2 × 80 Nm (40% duty cycle) / 2 × 60 Nm (rated torque) Machining Area Spindle distance: 600 mm Travel paths: X-Axis: 600 mm Y-Axis: 600 mm (optional 875 mm) Z-Axis: 500 mm Workpiece Clamping / Table System OP1: Tilting support with two separate tilting tables for fixture bridges OP2: Double tilting carrier (Q-axis) with two direct-drive NC rotary tables (A-/U-axes) Double-sided gearing on the tilting carrier Swivel time 0–180°: 3.5 s Max. asymmetric load: 800 Nm Repeatability Ø 800 mm: < 0.008 mm Max. clamping device and workpiece diameter: Ø 675 mm × 1,430 mm Max. workpiece weight: 600 kg Peak torque: 981 Nm Rated torque: 698 Nm Max. table speed: 50 rpm Angular acceleration: 2.5 – 10 rev/s² Indexing accuracy: ±5" Tangential moment: 4,500 Nm Max. load moment: 500 Nm Tool Change Times Chip-to-chip at n < 10,000 rpm: > 2.75 s Chip-to-chip at n < 17,500 rpm: > 3.15 s

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, About us Since 2014, we have been developing and manufacturing our systems in Austria as a machinery manufacturer. In addition to our individually customizable standard machines, we are also able to provide special solutions. We are happy to send you our product catalog—just contact us. Machining Center HSC 544HP 3rd Generation Key Data - Travel: 500 x 400 x 330 mm - BT30 spindle with 30,000 rpm and 6 Nm - 18-position tool magazine - Feed rate up to 27 m/min - Compact dimensions: W 1,460 x D 1,470 x H 2,110 mm, weight approx. 2,200 kg The machines are configured and assembled to customer specifications. Depending on requirements, numerous options are available, such as various spindle types up to 60,000 rpm, different cooling systems, direct position measuring, integrated automation solutions, and more. Control System - CS-Lab / AMT | Beckhoff optional - Clear and customizable user interface and easy operation via touchscreen - S-curve acceleration for dynamic axis movement with high precision - Integration of e.g. robots, pallet changers, workpiece changers, etc. possible Machine Frame - Heavy-duty frame made of mineral cast, optimized through FEM simulations - Very high vibration damping, rigidity, and ideal thermal characteristics - Use of linear roller guides instead of conventional ball guides for maximum rigidity - High-speed ball screws with low heat development Drive Train - Precisely matched AC servo drives for high contour accuracy - Direct-drive backlash-free ball screws Overview of Spindle Types 60,000 rpm | 0.3 Nm 40,000 rpm | 0.9 Nm 36,000 rpm | 2.4 Nm 30,000 rpm | 3.5 Nm Pedextvhuspfx Adnogw 30,000 rpm | 6.0 Nm 20,000 rpm | 10.5 Nm We are happy to offer you professional and comprehensive consulting to deliver the perfect solution for your machining and production requirements.

Condition: used, Year of construction: 2023, controller manufacturer: Heidenhain, controller model: TNC 640, _____ Description: Year of manuf. : 2023 Control : Heidenhain TNC 640 Speed : 15000 rpm Movement X/Y/Z : 1550/650/550 mm Tool holder : HSK 63 In General: Year of manufacture:2023 Control system:Heidenhain TNC 640 Speed:15,000 rpm Tool holder:HSK 63 Traverse path X/Y/Z:1,550/650/550 mm Spindle: Technology:Inline direct Speed:15,000 rpm Power:17 kW Tool holder:HSK 63 NC-swivel table: B-axis:+/- 110° C-axis:360° Pgodjxthp Repfx Adnew Clamping surface:600 mm Max. table load:500 kg Fixed table: Clamping surface:800 x 800 mm Max. table load:1,000 kg Tool magazin: Technology:Chain magazine Number of stations:60 Tool changer:Double gripper Tool diameter max.:75 (127) mm Tool length max.:350 mm Equipment: Measuring systems:Direct (glass scales) Chip disposal:Chip conveyor Coolant supply:Internal cooling, 20 bar Workpiece measurement:Wireless measuring probe Tool measurement:Tool measuring probe Set-up mode:Electronic handwheel

Condition: used, Year of construction: 2017, travel distance X-axis: 435 mm, travel distance Y-axis: 465 mm, travel distance Z-axis: 560 mm, workpiece weight (max.): 80 kg, total height: 2,755 mm, total length: 3,360 mm, total width: 3,870 mm, overall weight: 8,500 kg, spindle nose: MAS BBT 40, 5-axis Vertical Machining Centre CNC Control Matsuura G-Tech 31 i Table size ø 130 mm Table load 80 kg Number of pallets 10 max workpiece dia x height 330 x 300 mm Movement X-axis 435 mm Movement Y-axis 465 mm Movement Z-axis 560 mm C-axis (table rotation) 360° A-axis (table tilt) -125/+10° Spindle speed 50 - 15.000 R/min Spindle taper MAS BBT 40 Spindle motor 7,5/5,5 kW Magazin capacity 90 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Pgedpoxqpp Hsfx Adnjw Feel free to view our other advertisements for a complete overview of our stock.

Condition: ready for operation (used), Year of construction: 2014, General Data Machine weight 5670 Main Drive Spindle speed range 8100 Spindle motor power 22.4 kW Movement X-Axis Rapid Traverse 24.5 m/min Y-Axis Rapid Traverse 24.5 m/min Pjdpfx Adexpyxpenogw Z-Axis Rapid Traverse 24.5 m/min Table Outer length 1219 Outer width 457 Tslots size 16 MM Number of tslots 15 Distance between 80 MM Min distance between vertical spindle and table 102 Max distance between vertical spindle and table 737 Table load 1588 KG Tools Slots in storage 15 Max weight 5.4 Max tool diameter 189 This 3-axis milling machine was manufactured in 2014. Equipped with a powerful 22.4 kW spindle and precise positioning accuracy of 0.005 mm, this HAAS VF-3 offers exceptional performance for machining tasks. Its 20-tool horizontal carousel magazine ensures efficient tool changes, while the 15" LCD color monitor enhances user interface. With a maximum table load of 1588 kg and rapid traverse rates of 25.4 m/min, buy this HAAS VF-3 milling machine for versatile and reliable production capabilities. Contact us for further information. Application Types Milling

Condition: good (used), Year of construction: 2009, I sell the 3-axis CNC working centre HOLZ-HER PRO-MASTER 7023 with beam table Year 2009. Configuration: 3-axis main spindle 6 KW Tool magazine 8 positions HSK63 Pgsdpett S D Rsfx Adnew 1 grooving saw X-direction Drilling head 16+4+2 spindles Useful working area 3200 x 1060 x 378mm. 2 working fields, 4 clamping areas Automatic central system of lubrication. Holzher software controller with full instructions. Pump BECKER 250 m3/hr. Good condition. Available immediately.

Condition: used, Year of construction: 2019, Operating hours: approx. 27,500, with 8-position tool changer, travel distances (X/Y): 3,080 x 2,200 mm, vacuum clamping table approx. 300 x 250 cm, with roller conveyor approx. 350 x 220 cm, elevated with extraction beam, extraction connection, spindle cooling, safety light barrier and safety fence, protective cabinet, operator terminal, spindle speed approx. 22,000 rpm, 1 scissor lift table approx. 286 x 220 cm, 2 vacuum lifters, 1 cooling unit, 3 vacuum pumps, 1 PC terminal with PC, 1 HP E230 flat screen, keyboard and mouse. Pgsdpfx Adoxnamqsnew

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, About us Since 2014, we have been developing and manufacturing our systems as a machine builder in Austria. In addition to our individually adaptable standard machines, we are also able to offer custom solutions. We would be happy to send you our product catalogue—just get in touch with us. Machining Center HSC 544S 3rd Generation Key Data - 500x400x330mm traverse paths - ISO20 spindle with 30,000rpm and 0.6Nm - 18-position tool magazine - Feed rate up to 27m/min - Compact dimensions: W 1,460 x D 1,470 x H 2,110mm, weight approx. 2,200kg The machines are configured and built according to customer specifications. Depending on your requirements, a wide range of options is available, such as different spindle types up to 60,000rpm, various cooling systems, direct position measurement systems, integrated automation, etc. Control System Pgodpfx Asxtvhnjdnjw - CS-Lab / AMT | Beckhoff optional - Intuitive and customizable user interface, simple operation via touchscreen - S-curve acceleration for dynamic axis movement with high precision - Possible integration of robots, pallet changers, workpiece changers, etc. Machine Frame - Solid machine frame made from mineral cast, optimized using FEM simulations - Excellent vibration damping, rigidity, and ideal thermal behavior - Use of roller guides instead of conventional ball guides for maximum rigidity - High-speed ball screws with reduced heat generation Drive Train - Precision-matched AC servo drives for high contour accuracy - Directly driven, backlash-free ball screws Spindle Types Overview 60,000 rpm | 0.3 Nm 40,000 rpm | 0.9 Nm 36,000 rpm | 2.4 Nm 30,000 rpm | 3.5 Nm 30,000 rpm | 6.0 Nm 20,000 rpm | 10.5 Nm We will be happy to provide you with professional and comprehensive advice, ensuring you receive precisely the right solution for your machining requirements.

Condition: used, Year of construction: 2008, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 90 m/min, rapid traverse Y-axis: 90 m/min, rapid traverse Z-axis: 90 m/min, table width: 850 mm, table length: 1,250 mm, table load: 1,800 kg, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 60, CNC Heidenhain 530 WORKING AREA: Longitudinal travel X: 1,050 mm Transverse travel Y: 800 mm Podpfx Ajxqzgqjdnegw Vertical travel Z: 560 mm FEED RATES: Feed speed: 1–90,000 mm/min Rapid traverse X/Y/Z: 90/90/90 m/min SPINDLE: Power (40 / 100 % DC): 35/25 kW Torque (40 / 100 % DC): 130/86 Nm Spindle speed: 18,000 rpm Tool holder taper DIN 69871-A: ISO 40 TOOL CHANGER: Number of tools: 60 Max. tool diameter: 80 mm Max. tool diameter with adjacent positions free: 140 mm Max. tool length: 300 mm Chip-to-chip time: 6 sec TABLE: Clamping surface: 1,250 x 850 mm Max. load capacity: 1,800 kg Machine equipped with: • Linear motors on X, Y, Z axes • Tool presetting • Probe Year of manufacture: 2008

Condition: used, Year of construction: 2021, travel distance X-axis: 1,600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 740 mm, controller manufacturer: Fanuc, controller model: Series 0i-MF Plus, workpiece diameter (max.): 800 mm, total height: 3,435 mm, total length: 5,575 mm, total width: 4,621 mm, overall weight: 18,000 kg, Equipment: documentation/manual, CNC 5-axis Vertical machining Centre CNC Control Fanuc Series 0i - MF Plus Table size Ø 800 mm Number of pallets 1 Maximum workpiece dia x height Ø 1200 x 300 mm Movement X-Y-Z-axis 1600 x 700 x 400/740 mm C-Axis (table rotation) 360° B-Axis travel -11 /+30 ° Spindle speed 15.000 r/min Spindle Taper Big Plus BT40 Spindle motor 18,5/15 kW Magazin Capacity 60 Podpfx Ajxnmhnodnegw If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 1997, operating hours: 10,227 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 525 mm, travel distance Z-axis: 500 mm, table width: 540 mm, table length: 1,000 mm, overall weight: 4,500 kg, spindle speed (max.): 12,000 rpm, For sale is a machining centre from Deckel Maho, model DMU 60 E. The machine is fully functional and ready for immediate use. Particularly noteworthy are the low program run hours. Technical data: Year of manufacture (estimated): 1997 Control: HEIDENHAIN TNC 426PB Control ON: 8,283 h Machine ON: 31,148 h Program run: 10,227 h Total power requirement: approx. 26 kVA Travel X-axis: 600 mm Travel Y-axis: 525 mm Travel Z-axis: 500 mm Clamping surface: 1,000 x 540 mm Max. table load: 350 kg Pgjdpew I R I Hofx Adnjw Spindle speed range: 20 - 12,000 rpm Tool holder: SK 40 Feed speed: 20 - 10,000 mm/min Rapid traverse X/Y-axis: 18 m/min Rapid traverse Z-axis: 15 m/min Tool changer: 25 positions Dimensions (L x W x H): approx. 2.95 x 2.1 x 2.26 m Weight: approx. 4,500 kg Transport and loading can be organised throughout Europe at additional cost, upon request. All prices are subject to VAT. Inspection possible by appointment. Contact us — our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE. Do you require a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For more information or contact options, please visit our website.

Condition: good (used), Year of construction: 2000, I sell the 3-axis CNC working centre HOLZ-HER ECO-MASTER 7113 with beam table Year 2000. Configuration: 3-axis main spindle 7,5 KW Tool magazine 4 positions HSK63 1 grooving saw X-direction Drilling head 9+2 spindles Useful working area 2300 x 1000 x 130mm. 2 working fields, 4 clamping areas Pjdpfjtt Sy Hox Adnogw Automatic central system of lubrication. Holzher software controller with full instructions. Pump RIETSCHLE 2,2 KW Good condition. Available immediately.

Condition: used, Year of construction: 2008, Travel paths (X/Y/Z): 4,000x2,000x1,200 mm, 60-position tool changer SK50, angular head (manual), control: FANUC 18i-MB, 1 chip conveyor Pjdjxnalaopfx Adnjgw

Condition: used, Year of construction: 2001, functionality: fully functional, overall weight: 5,900 kg, space requirement height: 3,000 mm, space requirement width: 2,250 mm, space requirement length: 2,600 mm, workpiece weight (max.): 800 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 300 mm, spindle speed (max.): 42,000 rpm, Equipment: documentation/manual, Röders RFM600/2 - used Working area: X-axis: 600 mm Y-axis: 450 mm Z-axis: 300 mm (height) Machine table: T-slot design Size: 700 mm x 550 mm Workpiece weight: Maximum 800 kg Feed rates: 0 - 30,000 mm/min on all axes. Control system: Röders RMS6 Spindle: HSK-E40, 42,000 rpm incl. HG sensor (high-precision sensor for detecting and compensating spindle thermal elongation) Cooling: Minimum quantity lubrication, air Tool changer: 17-position linear changer Psdpfx Aexl Sfasdnogw Accessories: Laser for tool measurement & compensation Automatic 3D probe Tool cleaning Workpiece cleaning Web camera

Year of construction: 2006, condition: good (used), functionality: fully functional, Technical Specifications - Elumatec SBZ 122/20 Year 2006 16KW General Data Measurement width: 4622.8 mm Measurement depth: 1828.8 mm Measurement height: 2489.2 mm Machine weight: 1814.9 kg Pgodpfx Asw A Ipfodnjw Main Drive Spindle speed range: 21,000 rpm Spindle motor power: 8.5 HP Axis Travel X-AXIS Travel: 3777 mm Y-AXIS Travel: 350.5 mm Z-AXIS Travel: 279.4 mm Machine can be seen in operation in department 76 Available from week S38/S39 Price includes loading

Condition: used, _____ Description: Year of manuf. : 2008 Pgsdswx A Hqopfx Adnew Control : Siemens 840 Speed : 8000 rpm Movement X/Y/Z : 800/800/800 mm Tool holder : HSK 100 In General: Year of manufacture:2008 Speed:8,000 rpm Tool holder:HSK 100 Control system:Siemens 840 D Travel X/Y/Z:800/800/800 mm Table speed:700 rpm Spindle: Technology:Geared spindle Speed:8,000 rpm Max. power:28 kW Max. torque:727 Nm Tool holder:HSK-100 Turning function:Spindle clamping NC swivel head: Technology:Universal milling head B-axis:0.001° NC- Millturn table: Max. speed:700 rpm Clamping surface:800 x 630 mm Max. table load:800 kg Tool magazin: Technology:Chain magazine Number of stations:120 Tool changer:Double gripper Equipment: Chip disposal:Chip conveyor Coolant supply:IKZ system, 80 bar Coolant temperature control:Immersion cooler Position measuring systems:Direct in all axes Automation:2-fold pallet changer Turning function:Spindle clamping + rotary table Workpiece measurement:Preparation for measuring probe Process monitoring:Operating mode 4 Set-up mode:Electronic handwheel Emulsion mist separator:Mechanical separator

Condition: used, Year of construction: 2013, travel distance X-axis: 3,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 720 mm, total height: 3,355 mm, total length: 5,250 mm, total width: 3,573 mm, table width: 820 mm, table length: 3,500 mm, table load: 2,500 kg, spindle speed (min.): 35 rpm, spindle speed (max.): 18,000 rpm, Equipment: documentation/manual, CNC Control Mazatrol Matrix 2 Pgsdoxftkqjpfx Adnow Table size 3500 x 820 mm Table load 2500 kg Number of pallets 1 Movement X-Y-Z-axis 3000 - 800 -720 mm C-axis (table rotation) 0,0001° B-axis travel ± 110° Spindle speed 35 - 18.000 R/min Spindle taper HSK-A63 Spindle motor 35-26 kW Magazin capacity 30 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: good (used), Year of construction: 2011, I sell the 3-axis CNC working centre HOMAG WEEKE VENTURE 106M with beam table Year 2011. Configuration: 3-axis main spindle 9 KW Tool magazine 9 positions HSK63 1 grooving saw X-direction Drilling head 14+4+2 spindles Useful working area 3050 x 1260mm. 2 working fields, 2 clamping areas Automatic central system of lubrication. Pgodpfx Ajvld Epednew Software WoodWop 6.0 with full instructions. Pump BECKER 110m3/hr. Good condition. Available immediately.

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 15 h, YCM UV650 Spindle: SK40 / 15.000 rpm, 17kW toolchanger places: 60 control: Heidenhain TNC640 travel: X:620mm Y:520mm Z:460mm B:-50 / +110 C:360 spindle cooling system Blum laser for tool length measurement 3D probe el. hand wheel Emulsion cooling ICS 20bar outer cooling Podpfjuxbcisx Adnegw cooling gun chip conveyor machine dimensions: L:4250mm W:2310mm H:2.560mm weight: appr. 12.500kg

Condition: used, Year of construction: 2007, controller manufacturer: Heidenhain, controller model: iTNC 530, _____ Description: Year of manuf. : 2007 Control : Heidenhain iTNC 530 Speed : 42000 rpm Movement X/Y/Z : 800/600/500 mm Tool holder : HSK 40 In Generel: Technology:Automated graphite milling centre Components:2x 5-axis HSC milling centres + pallet system with robot Manufacturer:Mikron + EROWA Types:HSM 400 U + HSM 600 U + Robot Multi Twin Year of construction:2007 Control:Heidenhain iTNC 530 Speed:42,000 rpm Tool holder:HSK 40 Machine I: Manufacturer:Mikron Type:HSM 600 U Traverse paths X/Y/Z:800/600/500 mm Spindle speed:42,000 Tool holder:HSK 40 B-axis:+30° / -110° C-axis:360° C-axis speed:360 rpm Clamping surface:Erowa UCP 320x320 mm Max. table load:120 kg Tool magazine:68 stations Machine II: Manufacturer:Mikron Type:HSM 400 U Pjdpsxgpwcjfx Adnsgw Traverse paths X/Y/Z:400/240/350 mm Spindle speed:42,000 Tool holder:HSK 40 B-axis:+ - 110° C-axis:360° C-axis speed:250 rpm Clamping surface:ITS 148 Powerchuck Table load max:25 g Tool magazine:36 stations Automation: Manufacturer:EROWA Type:Robot Multi Twin Gripper station:6 station, various gripper Round storage:5 levels Level 1-2:5x UCP 300x300 mm Level 3-4:15x ITS 148 Level 5:30x ITS 50 Equipment: Measuring systems:Direct in all axes Workpiece measurement:Infrared measuring probe Tool measurement:LASER Set-up mode:Electronic handwheel Graphite extraction:2x BURN WK 5806 Automation:Round pallet storage

Condition: used, Year of construction: 2004, travel distance X-axis: 1,800 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,100 mm, total height: 4,375 mm, total length: 12,300 mm, total width: 11,200 mm, table width: 1,400 mm, table length: 1,600 mm, table load: 3,500 kg, Equipment: documentation/manual, 5-axis CNC Universal Machining centre, simultaneous Control: Heidenhain iTNC 530 Table size: 1600x1400 mm Table load: 3500 kg Number of pallets: 2 x Maximum workpiece diameterxheight: 1950x1100 mm Movement X-axis: 1800 mm Movement Y-axis: 2000 mm Movement Z-axis: 1100 mm C-Axis table rotation: 360 ° B-Axis travel: -7 / 187 ° Spindle Speed: 18000 1/min Spindle taper: HSK-A63 Spindle motor: 28/19 kW Magazin capacity: 120 Required floor space: 11200x12300 mm Pedpfx Ajxd A S Uodnjgw Height: 4375 mm Weight: 58000 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.

Condition: good (used), Year of construction: 2004, I sell the 3-axis CNC working centre HOLZ-HER UNI-MASTER 7226 with beam table Year 2004. Configuration: 3-axis main spindle recently full reconditioned / Water cooled Tool magazine 6 positions HSK63 on working head 1 grooving saw X-direction Drilling head 16+4 spindles Useful working area 3100x1360mm. 2 working fields, 4 clamping areas Pgodpfx Adei U Dxujnsw Automatic central system of lubrication. Holzher software controller with full instructions. 2x Pump SIEMENS ELMO-L S22 2,35KW. Good condition. Available immediately.