Used 2 Ram Baler for sale (78,140)

Condition: used, maximum load weight: 30,350 kg, overall weight: 45,000 kg, axle configuration: 2 axles, first registration: 06/2024, next inspection (TÜV): 06/2026, loading space length: 12,500 mm, loading space width: 2,550 mm, loading space height: 300 mm, total width: 2,550 mm, total height: 300 mm, Year of construction: 2024, Equipment: ABS, DOLL tera 2-Axle Lowbed Semi-Trailer Detachable gooseneck and additional drive-over rear bogie First registration: 06/2024 Mileage: only 43,398 km Unladen weight: 14,650 kg Permissible total weight: 45,000 kg Gooseneck length: 3,070 mm Coupling height: 1,200–1,280 mm Swing clearance radius: 2,350 mm Lowbed length: 6,800 mm Telescoping length: 5,700 mm Rear axle chassis length: 2,700 mm Excavator trough width: 700 mm Excavator trough depth: 550 mm Loading height lowbed: 300 mm Loading height above running gear: 955 mm Trailer width: 2,550 mm Hydraulic suspension: -70 / +530 mm Technical fifth wheel load: 21,000 kg Axle load: 24,000 kg Detachable gooseneck with external main frame Trailer paint finish: 3-coat incl. spray galvanizing DOLL Tronic CAN-Bus system Lowbed floor: 45 mm spruce hardwood planks between the flatbed frames 24-volt electro-hydraulics Trailer functions operated via DOLL keypads on the gooseneck ADDITIONAL STEERING with RADIO REMOTE EEG electronic single tracking for straight-line driving At the rear: aluminum folding ramps with lifting mechanism, length 2,100 mm, width 600 mm, manual width adjustment, load capacity 20,000 kg Nwedpfx Aox E Ixlehved Load securing in lowbed: 7 pairs of swiveling lashing rings, 13,400 daN lashing force 5 pairs of stake pockets in the side frame 3 pairs of M36 threads on the outside for screw-in lashing brackets Chassis: DOLL tera pendulum axles with hydraulic suspension (BPW axles) All axles hydraulically forced-steered, max. 60° steering angle on the last axle All lubrication points connected to the automatic central lubrication system (ZSA) WABCO trailer EBS with ABS and RSS Air tank in aluminum BEKA-MAX centralized lubrication system for front and rear bogie Oversize package with folding loading width extensions (2x 225 mm), warning sign package extendable to 3,200 mm wide Tires: 8x 245/70 R 17.5 RENTING is the new BUYING—immediately available from us as a full-service rental!

Condition: used, Max. Swing Diameter: Ø2,700 mm Max. Turning Diameter: Ø2,500 mm Max. Cutting Height: 2,000 mm Max. Torque: 40,403 N·m Max. Cutting Force: 3,000 kgf Max. Workpiece Weight: 12,000 kg Table Diameter: 2,000 mm Table Speed Range: 1 – 200 rpm Table Speed Control: Automatic 2-step Nwjdpfx Aheyk U Ngevsd Table Indexing Accuracy: 0.001° C-axis Cutting Feed Speed: 0 – 900 deg/min C-axis Max. Speed: 2.5 rpm Milling Spindle Speed: 30 – 3,000 rpm Milling Spindle Torque: 45 kgf·m Ram Head Item Specification Number of Tools: 1 pc Tool Size: 32 × 32 mm Ram Section Size: 240 × 240 mm Spindle Taper: ISO 7/24 No.50 Tool Magazine Capacity: 24 tools Max. Tool Weight: 50 kg CHIP CONVEYOR TOOL MEASUREMENT SYSTEM (RENISHAW) MANUAL/HYDRAULIC COMBINATION CHUCK LINEAR SCALE (X Z C) MILLING TOOL 4 pcs LATHE TOOL 5 pcs

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, FRIULMAC IDRAMAT TC/5WS+1/2 2.5 – Throughfeed CNC Machining Center for Furniture Components Year of manufacture: 2019 Condition: Very good Availability: By arrangement Inspection: By arrangement Double-sided throughfeed CNC machining center FRIULMAC IDRAMAT TC/5WS+1/2 2.5, ideal for finishing solid wood furniture components. Nsdpfx Aoyk Empjhvewd The machine integrates several work processes in a single production line: • Crosscutting & trimming • End drilling • Vertical and horizontal drilling • CNC milling • Glue application & injection • Dowel insertion Production output: 14–16 parts/minute Technical data • Material: Solid wood • Workpiece length: 200–2500 mm • Workpiece width: 30–200 mm • Workpiece thickness: 14–48 mm • Working height: 945 mm (0/+20 mm) • Voltage: 400 V / 50 Hz • Control system: CNC CNI with touchscreen Machine configuration 1. Throughfeed machining center IDRAMAT TC • Heavy-duty steel construction • Automatic width adjustment (movable shoulder) • Vertical magazine with photoelectric sensor • Servo-driven feed shoes • Upper pressure unit with rubber belts • Pneumatic workpiece clamping Working stations 1st station – Scoring/Trimming B 2/B 8 • 2× motor, 3 kW each • 7,600 rpm • Max. saw blade Ø 125 + 180 mm 2nd station – End drilling M • Motor 3 kW • 5,000 rpm • Drilling stroke 25–80 mm • Electric cylinder with brushless motor 3rd station – CNC vertical milling J 3D • Electric motor 8 kW • 9,000–12,000 rpm • X axis automatic, Y/Z manual • HSK63C tool mount 4th station – CNC vertical milling J 3D (second unit) • Identical to 3rd station 5A station – Glue injection R 4 • Electronically adjustable glue volume • 2+2 glue injectors • Tilt ±30° 5B station – Dowel unit R 5 • Vibratory feeder • Dowel lengths 30 and 60 mm • Minimum spacing 16 mm • Pneumatic stroke 80 mm Outfeed area – Drilling bridge PO 2/PN 2 • Combined vertical and horizontal drilling operations • 3× vertical drilling units • 3× horizontal drilling units • Swiveling table • Automatic workpiece transfer • Chip conveyor with auger Equipment • Soundproof enclosure • Safety guard • Workpiece return to operator • Vertical hopper feeder • Complete documentation: o Operating manual: Slovak o Touch panel/labels: Slovak o Electrical/pneumatic diagrams: English The photos show examples of products that can be manufactured with this machine. Price: €290,000 excl. VAT, shipping, and disassembly.

Condition: new, empty load weight: 688 kg, maximum load weight: 1,312 kg, overall weight: 2,000 kg, axle configuration: 2 axles, loading space length: 3,000 mm, loading space width: 1,500 mm, loading space height: 1,800 mm, loading space volume: 8.1 m³, color: grey, construction height: 2,380 mm, working width: 1,980 mm, Hydraulics, automatic reverse drive, ramp, hot-dip galvanizing, * IMMEDIATELY AVAILABLE * Technical data: - Type: New vehicle with 2 years TÜV from first registration - Availability: IMMEDIATELY! - TÜV: 2 years - Floor: Multiplex screen printing with anti-slip surface - Gross vehicle weight: 2,000 kg - Unladen weight: 688 kg - Payload: 1.312 kg - Interior dimensions: 300 x 150 x 180 cm (L x W x H) - Overall exterior dimensions: 435 x 198 x 238 cm (L x W x H) - Loading sill height: 52 cm - Tires: 185/70R13 - Brake: yes - Support wheel: yes, automatic - incl. vehicle documents (letter) - 100 km/h: at extra charge Equipment: - Brake: yes - Number of axles: 2 - Floor: Wooden floor - Walls material: Plywood, plastic-coated - Roof material: Plywood, plastic-coated - Through-loading height: 178 cm - Through-loading width: 142 cm - Through-loading length: 300 cm - Color: grey - Number of pallet spaces: 4 - Tipping / lowering function:Without - Overrun device/brake: KNOTT - Frame/chassis: welded steel frame - Galvanization: hot-dip galvanized - Drawbar: V-drawbar, bolted, C-profile - Mudguards: steel mudguards - Side door: No - Side flap: No - Rear doors / tailgate: tailgate - Rear door / tailgate material: Plywood - Tailgate load:approx. 500 kg - Rear passage dimensions:142 x 178 cm - Locks for box body: Eccentric locks - Drive-on angle: approx. 16 - Supports: Optional, retrofittable - Lashing rails: Optional, retrofittable - Lashing eyes: 6 - Interior light: Yes, battery - Rear lighting: Incandescent bulbs, lamps recessed in the rear frame - Side lighting: - - Plug for lighting: 13-pin - Vehicle documents: ZBII & COC documents Standard equipment: - Wooden floor and walls made of multiplex - Reinforced, sturdy bolted V-drawbar - Very sturdy welded steel frame - Frame completely hot-dip galvanized - Many standard features: - Many standard features: - Reinforced, sturdy bolted V-drawbar hot-dip galvanized - many cross beams therefore high point load - continuous side members - frame very torsion-resistant due to its stable construction - 6 lashing brackets recessed inside the side edge (1000DaN/kg) TÜV certified! - Battery - Interior light, for free positioning - Drive-on flap with gas pressure springs and anti-slip - Continuous interior height: approx. 178cm - Continuous interior width: approx. 142cm - 2x maneuvering handles at the front - Maintenance-free rubber spring axles from KNOTT - Automatic reverse drive - KNOTT overrun device and parking brake - Very sturdy bolted V-drawbar - 13-pin plug - Returning driver's license plug - reversing lights - large safety lighting - integrated rear fog light - lighting recessed in the rear frame - automatic support wheel in the middle Special equipment included in the price: - Walls ABS 15 mm. (extremely smooth coating) - The extremely smooth coating of these panels greatly simplifies any labeling of the trailer Accessories optionally available, as partially shown in the pictures: - Rear supports mounted, the pair - 100km/ approval with wheel shock absorbers - Lashing rails, anchor rails, additional load securing, locking beams, tension belts, etc. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We have been Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - Specialist dealer & repair wor Nwedpfxeu Ht Ito Ahvod

Condition: new, empty load weight: 708 kg, maximum load weight: 1,292 kg, overall weight: 2,000 kg, axle configuration: 2 axles, loading space length: 3,000 mm, loading space width: 1,800 mm, loading space height: 1,800 mm, loading space volume: 9.7 m³, color: grey, construction height: 2,360 mm, working width: 2,280 mm, Hydraulics, automatic reversing, hot-dip galvanizing, * IMMEDIATELY AVAILABLE * Technical data: - Make: Hapert Trailers - Model: Sapphire L-2 - Vehicle type: Box trailer - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (L x W x H): 300 x 180 x 180 cm - External dimensions (L x W x H): 435 x 228 x 236 cm - Loading height of floor: 52 cm - Perm. Gross vehicle weight: 2,000 kg - Unladen weight: 708 kg - Payload: 1.292 kg - Chassis: Low loader (wheels next to the body) - Tyres: 185/70R13 - Chassis: KNOTT rubber spring axle - Support wheel: Yes, automatic, 500 kg - 100 km/h approval: Optional, can be retrofitted Description: - Wooden floor and walls made of multiplex - Reinforced stable bolted V-drawbar - Very stable welded steel frame - Frame compl. hot-dip galvanized - many cross beams therefore high point load - continuous longitudinal beams - frame very torsion-resistant due to its stable construction - 6 lashing brackets recessed inside the side edge (1000DaN/kg) TÜV certified! - Battery - Interior light, for free positioning - Drive-on flap with gas pressure springs and anti-slip - Continuous interior height: approx. 178cm - Continuous interior width: approx. 172cm - 2x maneuvering handles at the front - Maintenance-free rubber spring axles from KNOTT - Automatic reverse - KNOTT overrun device and parking brake - Very sturdy bolted V-drawbar - 13-pin plug - Reversing headlights - Large, large, largerear driving lights - generously dimensioned safety lighting - integrated rear fog light - lighting recessed in the rear frame - automatic support wheel in the middle Optional retrofitting accessories: - rear supports fitted, the pair - 100km/ approval with wheel shock absorbers - lashing rails, anchor rails, additional load securing, locking beams, tension belts, etc. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We have been Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - Specialist dealer & repair workshop for over 30 years - Delivery throughout Germany possible with surcharge! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Njdpfx Ahsu N Ng Devewd

Condition: new, incl. ramp shaft with ramps / closed loading area with numerous lashing points / hand-operated winch Technical Data: • Brand: Martz • Model: GT PLATEAU 450/2 S 2.7T • Vehicle type: Car transporter • Vehicle condition: New vehicle • First registration: Without first registration • Technical inspection (TÜV): 2 years from first registration • Internal dimensions (LxWxH): 449 x 211 x 0 cm • External dimensions (LxWxH): 600 x 215 x 89 cm • Permissible total weight: 2,700 kg • Unladen weight: 625 kg • Payload: 2,075 kg • Chassis: Platform trailer (wheels under the bed) • Tyres: 195/55R10C • Suspension: KNOTT rubber torsion axle • Jockey wheel: Yes • 100 km/h approval: Optional, retrofittable DESCRIPTION • Anti-slip and waterproof phenolic plywood floor • incl. hand winch with brake • Slide-in ramp compartment below the platform • 2x steel loading ramps • Very robust welded steel frame • Frame fully hot-dip galvanized by immersion • 10x tie-down eyes integrated laterally in frame profile (600daN/kg) • Sideboards can be retrofitted anytime • Reverse-automated braking system • KNOTT overrun hitch and parking brake • Extra strong bolted V-drawbar (reinforced) • 13-pin plug • Reversing lights • Large-sized safety lighting • Integrated rear fog light • Rear frame-mounted recessed lighting • Rear left and right LED outline marker lights • Automatic jockey wheel installed Accessory options (retrofit on request): • 100 km/h certificate incl. shock absorbers • Wheel chocks • Sideboards • Anti-theft device • Spare wheel • Storage box • Reversing lights • Lashing straps • And much more Brand new vehicle with warranty and TÜV. - Financing or leasing available - Nationwide delivery available - All prices incl. VAT Nedpsx S Rm Ssfx Ahvjwd - Early dispatch of vehicle documents or provision of export/temporary plates (Germany) upon request - Export plates incl. customs registration available Descriptions and images are copyright protected!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available for immediate delivery! We have been authorized dealers and workshop for over 30 years for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Ifor Williams / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix and many more brands. - Subject to errors, mistakes, and prior sale -

Year of construction: 2012, condition: refurbished (used), Fresh concrete recycling plant BIBKO RAM 20/ used manufactory: Bibko type: RAM 20 YOM: 2012 Capacity: ca. 12 m³/h system washing trough, trough length 2500 mm separating layer 0,25 mm with discharge conveyor screw (new) overhauled/reconditioned and exactly aligned - gear reconditioned (overhauled) and sealed - all bearings are new - buckets and scraper exactly aligned Optional by surcharge: - 1 pcs feed hopper / used - 1 pcs agitator (wastewater) with console / used - 1 pcs control unit / used -for the full automatic control of the complete plant - 1 pcs gallows-shaped pipe/ used Facility is fully equipped, clean and primed. The final painting according to customer's request. location: South Germany offer and all price are net and ex stock Nwedpfxedvuurj Ahvjd without guarantee and/or guarantee, mistakes and/or false representations reserve, purchasing like see / how is it – standing or recumbent, subject prior sale _____ IT IS FORBIDDEN TO COPY OR PUBLICATE THIS OFFER BY ANY THIRD PARTIE OR THIRD PERSON.

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-MF200MK is the ideal multi chamber waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 200 kg. Various materials can be collected into two or more chambers installed next to each other and once a chamber is filled the rollable compaction head will be moved over and the material can be baled. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 16 Ton Bale weight: up to 200 kg (material depending) Bale size: 1000 H (var.) x 1100 W x 800 D mm Machine size: 2506 H x 3260 W x 1269 D mm Machine weight: 1400 kg Transport height: 2506 mm Loading aperture: 1100 W x 800 H mm Cycle times: 34 seconds Motor: 2.2 kW 16 Amp Power supply: 220 - 240 V (1 phase) Njdeva Hupopfx Ahvjwd Noise level: 68 dB User-friendly lever control Bale trolley for removing the bales Short processing time because there is always a chamber available for loading Retainer for reducing the material spring back Reel holder for 8 rolls of strapping A quality product “Made in Europe” Suitable for compacting Cardboard Plastic film and foils Big Bags Clothes Light valuable materials Optional extras Machine colour RAL PLC auto compaction cycles with bale full light and E-stop with locking key Extra chamber (up to 6 chambers in total) Strapping rolls Twin Chamber Waste Baler, Multi Chamber Waste Baler, Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, The BTS-MF250 is the ideal waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 250 kg. With a crush insert baler is even suitable for crushing individual small and large drums and also other sheet metal containers. The baling press impresses with its ease of use, safe operation and its large filling volume. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 15 Ton Bale weight: up to 250 kg (material depending) Bale size: 1000 H (var.) x 1200 W x 800 D mm Machine size: 2900 H x 1759 W x 1185 D mm Machine size: 985 kg Transport height: 2250 mm Loading aperture: 1200 W x 680 H mm Cycle times: 34 seconds Motor: 2.2 kW 16 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB User-friendly lever control Nwedpfx Aovalq Ashved Bale kicker for easy eject the bales Retainer for reducing the material spring back Reel holder for 4 rolls of strapping A quality product “Made in Europe” Suitable for compacting Cardboard Plastic film and foils Big Bags Drums and sheet metal containers Canisters and plastic containers Clothes Light valuable materials Optional extras Machine colour RAL Crush insert PLC auto compaction cycles with bale full light and E-stop with locking key Sliding top door Strapping rolls Power supply 380 - 400 V (3 phase) Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-MF200MK is the ideal multi chamber waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 200 kg. Various materials can be collected into two or more chambers installed next to each other and once a chamber is filled the rollable compaction head will be moved over and the material can be baled. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 16 Ton Bale weight: up to 200 kg (material depending) Bale size: 1000 H (var.) x 1100 W x 800 D mm Machine size: 2506 H x 3260 W x 1269 D mm Machine weight: 1400 kg Transport height: 2506 mm Loading aperture: 1100 W x 800 H mm Cycle times: 34 seconds Motor: 2.2 kW 16 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB User-friendly lever control Bale trolley for removing the bales Short processing time because there is always a chamber available for loading Retainer for reducing the material spring back Reel holder for 8 rolls of strapping A quality product “Made in Europe” Suitable for compacting Cardboard Plastic film and foils Big Bags Nodpfjvugz Ejx Ahvswd Clothes Light valuable materials Optional extras Machine colour RAL PLC auto compaction cycles with bale full light and E-stop with locking key Extra chamber (up to 6 chambers in total) Strapping rolls Twin Chamber Waste Baler, Multi Chamber Waste Baler, Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, The BTS-MF250 is the ideal waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 250 kg. With a crush insert baler is even suitable for crushing individual small and large drums and also other sheet metal containers. The baling press impresses with its ease of use, safe operation and its large filling volume. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 15 Ton Bale weight: up to 250 kg (material depending) Bale size: 1000 H (var.) x 1200 W x 800 D mm Machine size: 2900 H x 1759 W x 1185 D mm Nedsvalqgspfx Ahvswd Machine size: 985 kg Transport height: 2250 mm Loading aperture: 1200 W x 680 H mm Cycle times: 34 seconds Motor: 2.2 kW 16 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB User-friendly lever control Bale kicker for easy eject the bales Retainer for reducing the material spring back Reel holder for 4 rolls of strapping A quality product “Made in Europe” Suitable for compacting Cardboard Plastic film and foils Big Bags Drums and sheet metal containers Canisters and plastic containers Clothes Light valuable materials Optional extras Machine colour RAL Crush insert PLC auto compaction cycles with bale full light and E-stop with locking key Sliding top door Strapping rolls Power supply 380 - 400 V (3 phase) Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Condition: new, Siemens 6FX1138-6BL01 PLC 135WB/ACOP, 256KB RAM E-Stand: C SN:1359, unused in opened original packaging, 100% functional, scope of delivery as shown in photos Nedpfx Ajxagqmshvswd

Condition: ready for operation (used), Allen Bradley CAT. No. 1774-TB2 Series 2 Program Panel Interface Module , used, normal signs of wear, 100% functional Njdpei D Tzpsfx Ahvjwd

Condition: not inspected (used), functionality: unexamined, Harris TGS 215 3-RAM metal baler, 16” square with 600kw hydraulic power pack and hopper Video of baler in operation available on request, further details and photos to follow Nwjdpow E Htuefx Ahved Machine decommissioned

Year of construction: 2025, operating hours: 50 h, condition: like new (used), functionality: fully functional, Schtec WD 720 Double-Headed Corner Welding Machine for PVC Profiles For sale: Schtec WD 720, a precise and reliable double-head welding machine for welding plastic window and door profiles. Nodpfxeykkx Do Ahvjwd This machine welds two corners simultaneously in one operation and is suitable for variable angles from 60° to 180°. Thanks to its highly accurate welding tolerance of 0.2 mm, the WD 720 delivers strong, tight, and aesthetically perfect joints – suitable for both white and colored profiles. Key Features: • Simultaneous welding of two corners • Variable welding options between 60° – 180° • Can also be used as a single-head welding machine • 0.2 mm weld seam limitation (for white and colored profiles) • Manual positioning of the movable head • Pneumatic braking system for stable fixation • Individually adjustable heating, temperature, and time parameters • Digital touchscreen control panel • Special heating plates for uniform heat distribution • Easy cleaning system for the heating plates • Durable Teflon system for extended service life • Specially designed jig system for more efficient operations Application The Schtec WD 720 is ideal for medium-sized production companies seeking a reliable and precise welding solution. The combination of double-head welding, user-friendly operation, and high weld quality makes this machine suitable for series production of window frames.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, pressing force: 30 t, Tested, cleaned, full service was carried out. Fully equipped, ready to use! Nodpfx Aeyizpqohvswd

Condition: used, This listing is for a Atas Optic 2 Programmable Injector GC Nwjdpfexzhrzex Ahved

Condition: excellent (used), pressing force: 25 t, Equipment: documentation/manual, Tested, cleaned, full service performed. Fully equipped, ready to use! Nwodpfx Ahsx Alctsvsd

Condition: excellent (used), Year of construction: 2017, pressing force: 20 t, Technically well-functioning, fully equipped Bramidan B20 baler Nodpfx Ahoxwqn Djvowd

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, pressing force: 50 t, Fully functional Bramidan B50 baler, serviced, complete set - hook, strap rolls. Nsdpfxoxg Tk Tj Ahvjwd

Condition: excellent (used), Year of construction: 2015, operating hours: 97 h, functionality: fully functional, pressing force: 10 t, Fully serviced, fully equipped and ready to use. New oil. 5 units in stock. Nwsdpew Ey Dtsfx Ahved

Condition: like new (used), Year of construction: 2024, functionality: fully functional, pressing force: 30 t, Used Bramidan B30 baler. Newly repainted. Ready for use, fully equipped, in perfect working condition. New oil. Nwsdpfxoviymwo Ahvod

Year of construction: 1972, condition: used, machine/vehicle number: 32 416, max. working width: 1530 mm for metal sheets up to: 2,5 mm Nsdpfoy Np Asx Ahvswd opening width top clamping bar: 290 mm adjustment bending cheek: 90 mm clamping bar drive: 1,1 kW below cheek drive: 3 kW rear stop: ja mm weight: 2200 kg space needed: 800x3000x1380 mm

Condition: ready for operation (used), max. working width: 2040 mm for metal sheets up to: 2 mm opening width top clamping bar: 90 mm adjustment bending cheek: 90 mm clamping bar drive: 1,5 kW Nwedpjd Rbz Tjfx Ahved below cheek drive: 4 kW electrical connection: 380 V kW weight: 2600 kg space needed: 3050 x 800 x 1350 mm

Condition: used, Year of construction: 1980, sheet width 2000 mm Nedpeyv Niyofx Ahvjwd plate thickness 2,5 mm