Used 2 Color Offset Printing Press for sale (61,149)

Year of construction: 1971, condition: good (used), Pressing force: 63 t Table: 660 x 480 mm Itsdpfx Afoh N S Sdsion ram: 450 x 280 mm throat: 250 mm Ram stroke: 16 to 125 mm Sheet thickness continuous stroke: 3.2 mm max. distance table ram: 417 mm drop-through hole: 280 x 250 mm Adjustment ram downwards: 70 mm Stroke rate: 80 /min Connection: 6 kW Accessories/equipment: Condition: good Weight: 5 t Dimensions: 1.500 x 1.600 x 2.700 mm

Condition: good (used), Year of construction: 1984, Power: 800 kN Frequency: 30 - 200 rpm, adjustable by PIV gearing Stroke, adjustable: 20 - 100 mm Daylight: 500mm (max. stroke up) Ram adjustement: 75mm Size of bolster: 1.010 x 800mm Opening in bolster: 700 x 150mm Ram area: 860 x 700mm Motor power: 22 kW equipped by: - 8pc. guideways - hydraulic overload - motorized oil lubrication - motorized ram adjustment - electro pneumatic stroke adjustment with complete decoiling line make ALBA, consisting of: Decoiler Outer diameter max. 1.400mm equipped by: • Decoiler moveable hydraulic • hydraulic coil loading device • hydraulic drive • hydraulic expansion 480 - 530mm • hydraulic pressure arm, lateral adjustable by handwheel • lateral arms Straightener Type: Ma Ria 9 Itodpfx Ajdhzf Iefijn Width: max. 400mm Thickness: 0,5 - 5,0mm Number of pulling rolls: 2 pc., Ø 120mm, upper can be lifted by hydraulic Number of straightening rolls: 9 pc., Ø 60mm, upper rollls adjustable by hydraulic drive, all rolls supported equipped by: • hydraulic strip insertion device • lateral strip guidings at entrance • lateral strip guidings at exit • basket at exit • loop control by sensor • lateral loop guiding Roll feeder Type: Vhy 400 Width: max. 400mm Thickness: max. 5,0mm passline adjustement by hydraulic jack We can offer even only press or decoiling line

Year of construction: 2008, condition: used, pressure 315 t stroke 40-200 mm no. of strokes 20-100 Hub/min ram - range of adjustment 120 mm ram surface 2000x1100 mm table surface area 2000x1200 mm hole in the table 1700x250 mm 500 mm column travel -side 820x650 mm total power requirement 45 kW weight of the machine ca. 44 t Itsdpfsrdi Dlox Afijn

Year of construction: 1969, condition: used, pressure 63 t Itjdpfxjh Dfcts Afion throat - mm stroke 16 - 125 mm table surface area 800 x 630 mm ram adjustment 70 mm no. of strokes im Dauerlauf 80 Hub/min max. distance table - ram 417 mm ram surface 500 x 400 mm clamping plate thickness 70 mm total power requirement 6 kW weight of the machine ca. 5,5 t dimensions of the machine ca. m

Condition: excellent (used), Year of construction: 2021, 1 color flexo printing machine Manufacturer: Altinisik Makina Iodpfxetuvuuo Afijtn Model: AA1290 Year of manufacture: 2021 Format: 1290x1800 mm With skipfeed: 1550mm min. 350x750mm Cardboard thickness with special thickness up to 28mm Speed up to 7,000 Bg/h

Condition: excellent (used), Year of construction: 2023, operating hours: 1,200 h, functionality: fully functional, machine/vehicle number: L36/150, product height (max.): 25,000 mm, input voltage: 380 V, L36/150/TC/CE Years: 2023 Flexografic Printing Press 3 colours - 150 mm. width -Automatic twin turret re-winders rotating at the pre-selected tape roll length. - The operator will cut the tape, discharge the printed rolls and load the empty -380V. 50Hz 3phase Cast Iron Support Frame MACHINE DESCRIPTION 3" i.d. frictioned un-winder for tape Noise reducer & Low Tape alarm pressure roller Corona Treatment unit - Corona Treatment proportionally adjusted on the tape speed - Ventilation & Suction system for Corona Treatment - Primer Station before printing for tape printing preparing - Ventilation & Suction system for Primer Station 3 Printing Stations complete with metal screened rollers and printing cylinders with gears for 150,7 mm print repeat -Release Station after printing - Ventilation & Suction system for Release Station -Pressure roller for Release Station - Slitting station with razor blades on the adhesive size - Twin furrets re-winders with 2 mandrels for 3" i.d. cores - Pneumatic pump for automatic Primer and Release feeding - 9 additional different cliché cylinders with gears 3 x 260 3 x 280 3x Z100 - Cliché mounting device - Set of spacers for slitting blade holders setting - 152 mm rubber roller for full coating - 50 mm. paper tab dispenser + 30.000 paper tabs - Set of spare parts Itodpfx Aowq Ay Iefijn + Bonus Flexo plate Machine (water based) Price: €74.000

Condition: used, Year of construction: 2012, 2012 5 colors + coating unit Maximum format: 530 x 740 mm Paper thickness: 0.03–0.60 mm 208 million impressions IR + hot air dryer Perfecting: 1/4 – 5/0 Prinect Press Center with remote color console Prinect Press Center control console Prinect Press Center software Prinect Pressroom Manager Prinect Cockpit Press Center MasterLevel Press Center Instant Gate Press Center Wall-Screen Pressroom Server E 1204 Recooler GRC 430S Technotrans Feeder with non-stop device PerfectJackets Blue AutoPlate Pro AlcoSmart, Alcolor V InkStar Saphira Wash-up CombiStar compact Powder extraction system P-ABS 4101 V PowderStar AP 262 DryStar coating Delivery with non-stop device Itodpfx Afowhlmrjien DryStar IR Dryer Prinect Axis Control Chamber doctor blade system Aristar ScrollStar StaticStar compact Axis Control High-pile delivery In production Location: Germany Availability: 12/2025

Condition: used, Year of construction: 1989, DCM HAC 1400/5 Flexographic 5 Colour Printing Press (1989) With Inkmaster Ink Dispensing system Iedpfx Asxn N U Rjfistn Comprising of: ENR web feed (1994) DCM web cutting (1994) AFS Corona AVE-150D surface treatment system (2021) Inkmaker PICCS15-21-007 ink dispensing system

Condition: used, Year of construction: 2004, functionality: fully functional, Maximum Working Width: Up to 1,300 mm Maximum Roll Diameter: 1,000 mm Substrate Types: Suitable for printing on paper, plastic, and other flexible materials Drying System: Utilizes various drying systems, including hot air drying, infrared drying, and UV drying Quality Control: Advanced quality control system to ensure precise and high-quality printing Automatic Roll Change System: Allows quick and automatic roll changes Additional Features: Automatic registration system, tension control systems, and cutting and folding systems Itodpfxsv E H Rns Afijn

Condition: used, Year of construction: 1987, With this roll press, you can press different materials together in a single pass. Application example: Previously, sandwich panels were bonded and pressed with this machine. Technical data: - Manufacturer: Bürkle - Type: AM Ijdpfjwd Nx Djx Afijtn - Year of manufacture: 1987 - Working width: 1,600 mm - Working height: 880 + - 20 mm - Part height 20 - 160 mm - Operating side left - Pressure cylinder from above, rubberised - Counterpressure cylinder from below, rubberised - Width of counterpressure cylinder 1,700 mm - Feed 3 m/min. - Total electrical connection - Volt/Hz 400/50 - Location in warehouse in Blomberg

Condition: reconditioned (used), Year of construction: 2019, Dear Ladies & Gentlemen, We are offering a XEROX C60 with internal FIERY EX-i C60/70 & Offsetting Catch Tray for sale. Counter: ONLY 686.424 prints total Itedexn Uu Nspfx Afien This machine was fully and professionally checked in the seller's workshop and is in impeccable condition with excellent print image quality. Please contact us with questions! We will be happy to help you!

Condition: used, Printing machine Omso DM385/6 Box The machine can be inspected at any time. Itodsxn Rk Hjpfx Afijn

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: 181002, working width: 2,300 mm, power of the servo motor: 2,300 W, roll diameter: 500 mm, overall weight: 1,200 kg, Equipment: documentation/manual, Used for printing on cardboard using water-based inks with a polymer plate. Suitable for printing on solid boards (min. 300Q), all types of corrugated boards, die-cut blanks (e.g. die-cut or flat-folded flap boxes), and sheets from other materials such as hardboard, plywood, etc. Technical data: - working width: 2300 mm - print length (cardboard): 1400 mm - printing drum diameter: 500 mm - cardboard thickness: 1.5 to 7 mm - minimum cardboard format: 550 x 550 mm - maximum cardboard format: 1800 x 1400 mm Itsdpfoxnxmpsx Afien - adjustable output: up to 2500 pcs/h - installed power: 2.3 kW - supply/fuse: 400VAC / 16A - printer weight: approx. 1200 kg - printing polymer (important!): 5 mm

Condition: good (used), pressing force: 95 t, cylinder diameter: 90 mm, plate width: 1,350 mm, Veneer Press Joos Type: HP 90 with 2 intermediate plates, stacking automaton, and lift table Pressing area: 2,550 x 1,350 mm Intermediate plates: 2 pcs. Pressing pressure: 95 t Piston diameter: 90 mm Specific pressing pressure: 2.75 kg/cm³ Number of cylinders: 4 Heating medium: hot water Total power: 1.3 kW Safety device: emergency stop rope Itjdpoxnqq Hefx Afien Press dimensions: 3,000 x 1,530 x 2,200 mm Press weight: approx. 4 t Elkom heating plates in very good condition Scissor lift table The plates are stacked and thus unloaded automatically.

Condition: used, Two Valmac briquetting presses with a screw conveyor, storage silo, cooling line, and crusher. Further information available upon request. Isdpfx Afjw Dnc Usijtn Briquette diameter: 70 mm engine: 37 kW each power: approx. 400 kg/h per press

Condition: used, functionality: fully functional, machine/vehicle number: 358773, Heidelberg Kors 1 color All functions are operational on the machine Wischeres dampening system Itjdpfx Afoxnl Iasien Please make an offer!

Condition: reconditioned (used), Year of construction: 2019, Dear Ladies & Gentlemen, Itedpjxn Uuvjfx Afion We are offering a XEROX C60 with internal FIERY EX-i C60/70 & Offsetting Catch Tray for sale. Counter: ONLY 191.972 prints total This machine was fully and professionally checked in the seller's workshop and is in impeccable condition with excellent print image quality. Please contact us with questions! We will be happy to help you!

Condition: reconditioned (used), functionality: fully functional, Technical data: • 4-station rotary table • Max. sealing area 350 x 250 • Max. blister depth 70 – 100 mm depending on product type • Sealing force 12,800 N • Sealing heater power 1.75 kW • Carton feeder • Package ejector • Carton forming unit Ijdpfx Aefua Dcofijtn • Cable with CEE 16A plug • Weight approx. 750 kg Machine available in all variants b, b-2, b-3, b-4.

Condition: excellent (used), 8-color rotogravure printing press, brand ROTOMEC, year 2008, 110 cm width, fully equipped and in very good condition. Ijdpfx Ajxmd Icofiotn

Condition: excellent (used), Year of construction: 1992, Arpeco Impressionist 420mm web width unwind with roll lift and pneumatic 3” mandrel splice table web guide Sherman corona treater 7 x print units 7 x double UV dryers 7 x chill rolls all UV lamps are BRAND NEW ! 1 x 9.5kW chiller IR dryer Hot Air Isdpfxjrrvzrs Afietn end of press double size chill roll 2 x rewind mandrels pneumatic 3” many print cylinders and anilox rollers

Condition: new, pressure 60 t Itedpfxei A S I Ij Afion stroke 380 mm table surface area Arbeitsbreite 750 mm pressure 259 bar oil volume 38 dm³ ajustment speed 2,87 mm/sec work speed 9,5 mm/sec return speed 12 mm/sec total power requirement 2,2 kW weight of the machine ca. 540 kg Inner diameter of the cylinder [mm]: 170 Piston rod diameter [mm]: 75 Diameter piston crown [mm]: 100 - Integrated pressure gauge - Pressure regulator - Hydraulic unit with 2 speeds - Working table adjustable in height - Joystick to move the piston up / down The 60 ton workshop press has a fixed cylinder and a height-adjustable work table (motorized). Equipped with Pressure regulation, manometer, 2 speeds and a joystick for the move the piston up and down. With this joystick you can use the piston precisely move, making this hydraulic press perfect for precision jobs suitable.

Condition: excellent (used), Year of construction: 2016, operating hours: 27 h, SBL 1060 SE Year: 2016 Sheet feeder: Manual non-stop pile feeder Material range: Paper and board from 470 × 350 mm to 1060 × 760 mm Max cutting format: 1050 × 740 mm Min sheet size: 470 × 350 mm Max sheet size: 1060 × 760 mm Max cutting pressure: 300 tons Material thickness: 0.1 – 2 mm (corrugated/laminated max 4 mm) Min gripper margin: 9.5 mm Max inside chase size: 1155 × 852 mm Cutting plate size: 1076 × 756 mm Max speed: 8,000 sheets/hour Power consumption: Total 32 kW (22 kW + 10 kW for lower plate heating) Machine dimensions (L×W×H): 5,900 × 5,700 × 2,615 mm Max pile height – feeder (with pallet): 1,750 mm Max pile height – delivery (with pallet): 1,450 mm Feeder Section - Pneumatic feeder table - Non-stop manual feeder system - Anti-static system - Pre-pile device - Manual suction group adjustment Itodowypp Iopfx Afijn - Micrometric suction adjustment - Motorized side pile adjustment - Suction belt feeder table - High-pressure lubrication pump - 2 pneumatic side register guides - Electronic control of front and side register Cutting/Embossing Section - Automatic pressure adjustment up to 300 tons - Preparation and introduction table for die frames in platen - 2 quick-lock die chase frames with bottom plate - Pneumatic locking of the chase and lower supporting plate - Centerline System - Micrometric system - Heated lower support plate (24 mm) - Cutting plate: 4 mm - Compensation plate: 3 mm - Archiveable 1 mm thin cutting plate Stripping Section - Quick lock for upper and central stripper frames - 2 standard upper stripper frames - 2 standard lower stripper frames - Double accessory kit for lower stripper prep (pins, bars, clamps, etc.) Delivery Section - High-pile automatic non-stop delivery with conveyor - Guillotine for automatic removal of gripper margin waste - Sheet deceleration device - Tab insertion device

Condition: new, Year of construction: 2022, pressure 200 t stroke 400 mm table surface area Arbeitsbreite 1300 mm pressure 243 bar oil volume 64 dm³ ajustment speed 5,73 mm/sec work speed 1,84 mm/sec return speed 7,08 mm/sec total power requirement 3,0 kW weight of the machine ca. 1690 kg Inner diameter of the cylinder [mm]: 320 Piston rod diameter [mm]: 140 Diameter piston crown [mm]: 175 - adjustable cylinder (left-right) - Integrated pressure gauge Itsdpfxet I D Tho Afijn - Pressure regulator - Two-speed hydraulic unit - Working table adjustable in height - Joystick to move the piston up / down - Hand pump for precision work - with digital display This 200 ton hydraulic press is equipped with a movable cylinder (left- right), a height-adjustable work table, a pressure regulator, 2 speeds, a joystick and a hand pump for precision pressing fitted.

Condition: used, Year of construction: 2021, functionality: fully functional, 3 colour flexo with slotter, rotery die cutter and folder-gluer SERIAL WORK(mm): 1290x2600 HOPPER OPERATION(mm): 1550x2600 Itsdpfow Rya Dsx Afion MIN. CARTON WIDTH(mm): 350x750 MAX. PRINT AREA(mm): 1290x2350 CHANNEL WIDTH(mm): 9 CLICHE THICKNESS(mm): 3.9 MAX. CARDBOARD THICKNESS(mm): 10 CAPACITY (PCS/HOUR): 6000 MAX. ROTERY CUTTING AREA(mm): 1240x2350 CUTTER TIRE THICKNESS(mm): 10 PRESSURE TURN DIAMETER(mm): 399 CLICHÉ PRINT ROLLER DIAMETER(mm): 407 ROTERY FORMWORK ROLLER(mm): 360 ROTERY RUBBER REDIAMETER(mm): 292 MAIN MOTOR POWER(kw): 15

Condition: new, pressure 100 t stroke 380 mm table surface area Arbeitsbreite 1100 mm pressure 258 bar oil volume 46 dm³ ajustment speed 7,54 mm/sec work speed 2,47 mm/sec return speed 9,06 mm/sec total power requirement 2,2 kW weight of the machine ca. 970 kg Inner diameter of the cylinder [mm]: 220 Piston rod diameter [mm]: 90 Itsdpfxei A S I So Afien Diameter piston crown [mm]: 120 - Movable cylinder (left-right) - Integrated pressure gauge - Pressure regulator - Two-speed hydraulic unit - Working table adjustable in height - Joystick to move the piston up / down - Hand pump for precision work The 100 ton hydraulic press is equipped with a movable cylinder (left- right) and a height-adjustable work table. Over and beyond it has a pressure regulation, 2 speeds, a joystick and a hand pump for precision pressing.