FLEXLABELLER PE-ET LABELING MACHINE

Maurer Gép FLEXLABELLER PE-ET

Year of construction: 2026, condition: new, The fruit washer with a mill for fruits and vegetables is made entirely of stainless steel and is equipped with a sorting grate, a washing tank, and a conveyor belt. The fruits are immersed in water for a pre-wash. Afterwards, they are transported further via the conveyor belt, which thoroughly cleans the fruits with fresh water. After cleaning, the fruits enter the mill, where they are processed with the desired sieve to achieve the required mash consistency. • Easy to clean • Low maintenance requirements • Belt speed is steplessly adjustable in both directions • Equipped with 2 swivel wheels • Equipped with 2 fixed wheels Cjdpfx Aev Srgujfgohc Technical Information • Nominal capacity: 2000 kg/h • Power requirement: 3 kW, 400 V, 10 A • Mash discharge height: 1400 mm • Connection for washing tank: G 6/4” • Connection for cleaning: G ½” • Material: WNr. 1.4301, AISI 304 stainless steel • Water consumption: approx. 12 L/min Dimensions: Length: 2700 mm Width: 840 mm Height: 2270 mm Weight: 150 kg

Year of construction: 2026, condition: new, Our belt presses are equipped with two large pressing rollers that extend the pressing process, ensuring particularly gentle juice extraction. The result is a clear, foam-free juice of high quality. The pneumatic belt tension and automatic belt control guarantee consistently high quality throughout the entire pressing process. Csdpev Sq S Njfx Afgshc The belt press features an automatic brush cleaning system, eliminating the need for a high-pressure cleaner. The belt is cleaned by six specially designed water nozzles. For cleaning, only a compressor with 8 bar pressure and a ½” water connection are required. Thanks to these special nozzles, water consumption is reduced, leading to lower operating costs. The open design allows for quick and uncomplicated cleaning, which can be completed in just a few minutes. Technical Information: • Nominal capacity: 950 kg/h • Power requirement: 1 kW, 400 V, 16 A • Material: WNr. 1.4301, AISI 304 stainless steel • Compressed air requirement: 50 l/h at 6 bar • IP65 electronic control cabinet • Juice yield: Up to 75% • Fully automatic and stepless control of belt speed • User-friendly • Easy to clean • Rollable machine feet Dimensions: Length: 2230 mm Width: 1450 mm Height: 1250 mm Loading height: 1240 mm Pomace discharge height: 500 mm Juice outlet height: 370 mm Weight: 540 kg Optional: Juice collection tray ISW 100 Automatic juice discharge

Condition: refurbished (used), Herma semi automatic wrap labeller, Allen Hotfoil Encoder, with spares and manual, all mounted on stainless table, 1Ph Codpfx Afoib Dcregjhc

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: AN2018080, total length: 12,860 mm, total width: 4,806 mm, type of input current: three-phase, input voltage: 400 V, feed length X-axis: 3,000 mm, working width: 350 mm, power: 25 kW (33.99 HP), TRC 1500 – Timber Repair & Cosmetic Machine Technical Description • System Overview • Process Workflow System Overview The Wintersteiger TRC 1500 is a fully automated industrial system designed to detect, repair defects in wooden boards. It combines advanced 3D scanning, high-pressure thermoplastic injection technology to deliver consistent, high-quality repairs at production speed. Defects are repaired with thermoplastic filling material using injection and application units. No filling material is wasted thanks to the precise calculation of the filling quantity and precision injection. the edges can also be filled. Key Features • Automated 3D laser triangulation defect detection • High-pressure thermoplastic injection for durable repairs • Precision finishing unit for cosmetic perfection • Independent melt temperature zones with 8 kg tank • Closed glycol-water cooling system for controlled solidification • Ethernet-based control system with remote maintenance • Unlimited product profiles and intuitive scanner interface Product Range (Workpiece Specifications) Length 500–3000 mm Width 100–350 mm Thickness 3–30 mm Production speed upto 10 m/min – depending on number and sizes of defects Filling System – Injection & Application Units • Injection Unit: • 3-axis positioning (X/Y servo-driven, Z pneumatic) • Pressure-regulated melt feed • High-pressure injection • Application Unit: • 3-axis control • Fine finishing of repaired areas Faulty Spot Eye Scanner • 3D laser triangulation and high-speed camera system. • Detects defects from approx. 1 mm depth Csdex Dmdhspfx Afgjhc • Automatic height adjustment • 2D + 3D measurement • Adjustable parameters for wood types Melting Unit • 8 kg tank • Independent temperature zones • Integrated piston pump for constant pressure Cooling Unit • Closed glycol-water circuit • Stable temperature control Control System • Ethernet-based communication with remote maintenance • Access to PLC, scanner, servo drives • Energy-efficient regenerative drive technology Scanner Software • Processes 3D light-section profiles • Calculates defect volume and coordinates • Unlimited product programs • Intuitive operator interface High-Pressure Injection Process 1. Melting of thermoplastic material 2. Pressure and temperature regulation 3. Targeted injection into defect 4. Immediate cooling 5. Minimal surface residue • Benefits: • Low material usage • Excellent adhesion • No alteration of surrounding wood structure System Architecture • Melting unit • Heated hoses • Injection head • Cooling plate • Cooling unit with supply/return flow

Year of construction: 2020, condition: new, 1000l/h Stainless steel frame on 4 adjustable feet Minimum / Maximum Level sensor in the pressure tank Stainless steel pressure vessel The product is pressed through a multi-nozzle head in the tank ; Product Pump: Inlet check valve of the product Chodpfx Ajcx Smbefgjc Sight glass at the inlet of the product CO2 pressure control valve for installation on the CO2 bottle Sight glass in the pressure vessel Max. Pressure : 6 bar incl . electronic control incl . booster pump

Condition: excellent (used), Year of construction: 2016, BAG-IN-BOX SEMI AUTO FILLING MACHINE Smurfit Kappa Vitop, ITALY, 2016 Bag filling volume from 1L to 28L Pouch-up filling volume from 1L to 3L Csdpfx Aoyr Awbjfgohc Touch screen control panel The semi-automatic filling machine Vitop has been designed to fill liquid and semi-liquid products in bags and pouches. Improved shelf-life of liquid thanks to revolutionary filling valve that separates vacuum and nitrogen circuits Easy to operate and maintain Precise electromagnetic flowmeter for filling accuracy Hygienic: Equipped with a cleaning a sanitizing program Suitable for Vitop® Original and Vitop® Compact Simple to adjust between sizes Optional laminar air flow for filling in ultra clean conditions Especially well-suited to medium and Pouch-Up® fillers, the semiautomatic filling machine Vitop offers excellent performances and reliability. The filler uncaps the tap, inhales air from the bag before filling, fills the bag/pouch with the required quantity of liquid and recaps the tap. Nitrogen is inflated at the end of the cycle in order to better preserve the product inside and help to clean the valve neck. An airflow hood (option) provides mechanical decontamination around the filling body area through overpressure.

Condition: used, Semi-automatic PET bottle blow molding machine Manufacturer: FERENC Model: F-1400 Year of manufacture: 2006 Output: approx. 800 pcs/h Number of molds in the machine: 2 x 5 L (48 mm cap) Oven dimensions: Cedjugu E Ropfx Afgehc - Length: 900 mm - Width: 900 mm - Height: 1200 mm Blow molder dimensions: - Length: 1800 mm - Width: 750 mm - Height: 2000 mm Set weight: 1200 kg Technical condition: used machine

Year of construction: 1999, condition: excellent (used), CFS / TIROMAT COMPACT Csdpspcddxjfx Afgjhc ID.NO. 2568 CFS / Tiromat compact with associated Mr label year mod 1999. Updated electronics with Siemens touch display. Rejection 350 mm äfoil width 422 mm. 6 part tool 119 x 150 mm Max depth 140 mm. Dimensions 615 x 105 cm H 215 cm.

Condition: ready for operation (used), Inkjet printer for frame bending machine Length: 800mm Width: 1000mm Height: 1900mm Chedpfx Afohzgtujgsc Weight: about 100kg

Year of construction: 2025, condition: new, Beltpress for fruits and vegetabes Chjdpfx Aebpz D Aofgjc Beltwith 1250mm capacity up to 10000 kg/h 27 rollers beltcleaningsystem with brushes and highpressurecleaning