Flatbed + tarpaulin

MAN TGL 8.190 4x2 BL Plane, LBW

Year of construction: 2006, condition: good (used), Power generator, emergency power generator, generator, power generator, power generator, emergency power generator -Electric start -Power: 3.8 kVA 50 Hz -petrol engine -only: 95 operating hours -2x Schuko: 230 Volt, 1 socket slightly damaged Lodjflmm Sopfx Affeta -Dimensions of unit: 580/530/H615 mm -Weight: 79 kg

Year of construction: 1968, operating hours: 35,000 h, condition: good (used), functionality: fully functional, machine/vehicle number: 7723238, 72x102cm two revolution die cutter for thin paper and light carton up to 600 grs/m2. excellent stable and very silent fast cylinder press. Locking to the floor is not necessary. Price is for each machine, NOT for the package. Package is 15% discount. Ltsdpstyy Sfofx Affea Two identical machines available from the same shop, both with the same specs and the same state of maintenance. As a kind of specialist in these type of machines, I have delivered machines to this company which already had one, so at certain moment they produced with 4 machines and 6 or 7 Heidelberg Cylinder presses at half the size. maintenance always carried out by my company, so both machines have a known history, which is good. As a result of shrinking industry in The Netherlands and different types of shivering/perforating/scoring on offset presses with the cutting plates, the company went to a smaller building and only kept one Condor. In my opinion the best, fastest and strongest letterpress ever, built in this size, for sure! With less parts than a Heidelberg SBD and running much smoother. As a result of my cooperation with the KBA factory and particular Mr. Hans Bernhard Bolza-Schünemann who is the engineer responsible of the several new innovative constructions in the Condor, a small sized Condor (65x95cm) in very good original condition as a complete printing press, with some ""patina"" was donated to the Leipzig -er Museum für Printkunst (June 2002), because of its importance for the development of the printing industry in the 60's.

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, overall weight: 52,000 kg, punching force: 600 t, space requirement height: 3,520 mm, space requirement length: 12,150 mm, space requirement width: 9,340 mm, Machine for punching, embossing, waste stripping and blanking Used machine, overhauled at the QTM Schwalmtal plant Ledst E Nthopfx Affjta System equipped with high-performance sheet feeder for NON-STOP operation ⦁ For fully automatic punching, creasing and embossing with or without gripper edge ⦁ for stripping the inner waste as well as the side and rear sheet edges ⦁ for stacking the punched and stripped sheets with the attached gripper edges or the attached gripper edges or ⦁ for cutting off the gripper edges and then depositing the remaining sheets in stacks remaining sheets ⦁ with a patented gripper carriage register system for maximum register accuracy ⦁ with a bundle stacking machine that features a fully automatic separating sheet feeder and NON-STOP delivery and does not need to be converted even for the smallest blanks. changeover even the smallest cuts. (Shuttle table with comb structure) ⦁ Cut-off sheet magazine with electrical stock control, during production refillable during production ⦁ with Centerline equipment ⦁ with automatic pallet changing device in the storage area ⦁ Modem ⦁ Standard elevation of the machine 600 mm Specification Sheet format max. 1060 x 1450 mm Sheet format min. 500 x 700 mm Maximum punching force 6.0 MN (600t) Speed 8,000 Bg / h Processable materials: Paper min. 80 g/m² Cardboard up to 2000 g/ Corrugated cardboard up to 5 mm (max. sheet curvature 4 %) Features: patented QTM rail system manual non-stop feeder stripping station depaneling station Centerline Fully automatic pallet changing device Deposit incl. platform Upgrade of the control system to Siemens S7 Completely overhauled machine drive Quick-clamping frame in all tool stations

Condition: new, ELMAG Portable Powerstation ENERGY 2400, LiFEPO4 battery with 2232Wh ENERGY 600 - 2400 The new ENERGY series comprises 4 performance sizes of portable power stations for a mains-independent power supply and emergency power supply for your consumers. The extensive range of applications covers all areas of use. Whether for camping, at festivals, as a power source for sales stands or as a self-sufficient emergency power solution in the event of a blackout, the ELMAG Powerstations are always your reliable companion. Display - Battery capacity in % and segments - Remaining runtime - Power output - Power consumption - Output status - Symbol display for protective function Ledpfxot H E Iqs Affsta Features Outlets: - 4x Schuko 230 Volt - 1x 12V KFZ 10 A - 1x 12V round 10 A - 2x USB-C 60 W - 1x USB-A 5V 2 A - 3x USB-A QC3 Inputs: - 2x 7909 12V - 45V - 2x ANDERSON 12V - 45V - 1x 12 KFZ 10 A LED light 7W Digital display Protection class IP21 Protective functions: - Deep charge - overvoltage - overcharge - short circuit - Overtemperature - Undertemperature 2x mains adapter 200W included 1x car charging cable included ADVANTAGES Lithium iron phosphate battery (LIFEPO4) for maximum safety and durability Also ideal for operation in high ambient temperatures High cycle stability > 2500 cycles 3 charging options: Solar, 230V and 12V Intelligent battery management system with extensive protection functions against undervoltage, overvoltage, overheating, short circuit and overcharging Extensive connection options: Schuko 12V DC, USB-A, USB-C etc. Digital display with detailed status monitoring Integrated MPPT solar charge controller Simultaneous charging and discharging possible Internal lighting with SOS function TECHNICAL DATA Battery type LIFEPO4 Battery capacity 2.232 kWh Voltage type pure sine wave Dimensions LxWxH 425x275x315 mm Weight 25 kg Maximum power 1~230V 5000 W Continuous power 1~230V 2400 W Maximum charging power 400 W

Condition: used, LINDE Electric Forklift Type E25L-01 Serial No. H2X387D01930 Year of Manufacture 2013 Load Capacity 2500 kg Lift Height 4700 mm Fork Length 1600 mm Fork Carriage Width 1150 mm Overall Height 2200 mm Operating Voltage 80 Volts - Triplex clear-view mast with 1500 mm free lift - 2x auxiliary hydraulics on the fork carriage for attachments - HOPPECKE Type 5HPZS 575 battery pack, 80 Volt 575 AH with EUW (new battery from 2019) - INDATRON Type D automatic charger, 80 Volt / 80 Ampere with EUW - 4-wheel super-elastic, solid rubber tires, front 225/75-10, rear 200/50-10 - Driver's cabin with Heating - Hydraulic auxiliary steering Ledpfxed Rmx No Affsta - 2 LED work lights at the front - 1 LED work light at the rear - 1 LED BlueSpott at the rear - 15,995 operating hours according to the hour meter - New TÜV and UVV inspection Length without forks: 2,500 mm Overall width: 1,150 mm Weight: approx. 4,700 kg Good condition

Condition: good (used), I SELL FEIN PS 50 MAGNETIC DRILL. IN VERY GOOD CONDITION. Ltsdpfx Aoulc Tuoffja

Condition: used, mileage: 525,000 km, power: 151 kW (205.30 HP), first registration: 12/2007, fuel type: diesel, empty load weight: 5,365 kg, maximum load weight: 2,125 kg, overall weight: 7,490 kg, tire size: 235/75R17.5, axle configuration: 4x2, wheelbase: 4,200 mm, next inspection (TÜV): 05/2023, color: silver, driver cabin: day cab, gearing type: mechanical, emission class: euro4, suspension: steel-air, number of seats: 2, loading space length: 6,200 mm, loading space width: 2,460 mm, loading space height: 2,600 mm, Equipment: ABS, air conditioning, cabin, fog lights, low noise, onboard computer, power assisted steering, spoiler, tail-lift, traction control, trailer coupling, Vehicle location: Bovenden, registration number house, 1x air seat, electric mirror, heated mirrors, air conditioning, sun visor, switch 6, ABS (anti-lock braking system), traction control (ASR), constant throttle, roof spoiler, fog lights, leaf-air suspension, air+light trailer hitch, low-noise G1, lashing rails, U-protection, tail lift aluminum, upright, environmental badge green Wheelbase: 4200 mm Body: box body with 1.5 t tail lift MBB 1500KL, ENGINE DAMAGE! ZF 6S 850 gearbox, C cab, air conditioning. Various repairs were carried out on the vehicle in 04/2022 (new turbocharger, brakes etc.) for approx. 10,000.00€. The vehicle has engine damage! A matching Ackermann box trailer can be purchased for an additional charge of 6.900,00€ net! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - . Ltedpsvhkqdsfx Affsa

Condition: new, Various inking and dampening rollers for KBA Rapida 142: - no. 374.0101.1 Westland Ink form roller / Farbauftragwalze, Ø 117mm, new (4 pieces) - no. 374.0102.1 Westland Ink form roller / Farbauftragwalze, Ø 123mm, new (2 pieces) - no. 374.0201.1 Westland Ink form roller / Farbauftragwalze, Ø 129mm, new (3 pieces) - no. 374.0202.1 Westland Ink form roller / Farbauftragwalze, Ø 135mm, new (1 piece) - no. 374.0301.2 Westland Ink vibrator roller / Farbheberwalze, Ø 117mm, new (3 pieces) - no. 374.0401.1 Westland Ink distributor roller / Farbreiberwalze, Ø 117mm, new (3 pieces) Ljdpsv Ebf Hsfx Affjta - no. 374.0402.1 Westland Ink distributor roller / Farbreiberwalze, Ø 123mm, new (4 pieces) - no. 374.0501.1 Westland Ink distributor roller / Farbreiberwalze, Ø 129mm, new (3 pieces) - no. 374.1005.1 Westland Waterform roller / Feuchtauftragwalze, Ø 135mm, new (5 pieces) - no. 374.1199.1 Westland Metering roller / Feuchtdosierwalze, Ø 130mm, new (3 pieces) - no. 90001067 Ebonit Ink distributor roller / Reiberwalze, Ø 80mm, used (2 pieces) - no. 90008616 Ebonit Ink distributor roller / Reiberwalze, Ø 102.3mm, used (1 piece) - Rilsan Oscillating roller / Beschwerwalze, Ø 60mm, used (1 piece)

Condition: used, machine/vehicle number: 005639, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Corner Rounding Unit: yes Combination Squaring Edgebanding Machine: First and Second Pass Max Panel Width: 3000 mm Max feed speed: 50 m/min Operating Units Right Side: 12 nr Lsdpfx Afsvw Evgefeta Operating Units Left Side: 12 nr

Condition: used, Year of construction: 2015, operating hours: 15,287 h, load capacity: 4,990 kg, lifting height: 4,350 mm, free lift: 1,390 mm, fuel type: electric, mast type: triplex, construction height: 2,350 mm, fork length: 2,400 mm, total length: 3,200 mm, drive type: Elektro, construction width: 1,500 mm, Electric 4-wheel forklift Load center: 600 Fork width: 150 mm Lsdpfx Afovdvwbjfota Fork thickness: 60 mm Mast type: Triplex Front tires type: Superelastic Front tires size: 23x10-12 Rear tires Type: Superelastic Rear tires size: 21x8-9 Battery Volt: 80V Battery Ah: 930Ah Battery year of construction: 2014 Sideshift, fork positioner, parabolic mirror, 2 additional headlights front top ZV with sideshift Meyer Rear work lights, front work lights, heating, full cab, impulse control, full free lift,