Electric motor 0.35/0.5 kW 660/1325 Rpm

P.I.V.-Antrieb 90/8/4-142 541

Year of construction: 1968, operating hours: 35,000 h, condition: good (used), functionality: fully functional, machine/vehicle number: 7723238, 72x102cm two revolution die cutter for thin paper and light carton up to 600 grs/m2. excellent stable and very silent fast cylinder press. Locking to the floor is not necessary. Hodpfxjtyy Sfe Adaoh Price is for each machine, NOT for the package. Package is 15% discount. Two identical machines available from the same shop, both with the same specs and the same state of maintenance. As a kind of specialist in these type of machines, I have delivered machines to this company which already had one, so at certain moment they produced with 4 machines and 6 or 7 Heidelberg Cylinder presses at half the size. maintenance always carried out by my company, so both machines have a known history, which is good. As a result of shrinking industry in The Netherlands and different types of shivering/perforating/scoring on offset presses with the cutting plates, the company went to a smaller building and only kept one Condor. In my opinion the best, fastest and strongest letterpress ever, built in this size, for sure! With less parts than a Heidelberg SBD and running much smoother. As a result of my cooperation with the KBA factory and particular Mr. Hans Bernhard Bolza-Schünemann who is the engineer responsible of the several new innovative constructions in the Condor, a small sized Condor (65x95cm) in very good original condition as a complete printing press, with some ""patina"" was donated to the Leipzig -er Museum für Printkunst (June 2002), because of its importance for the development of the printing industry in the 60's.

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, overall weight: 52,000 kg, punching force: 600 t, space requirement height: 3,520 mm, space requirement length: 12,150 mm, space requirement width: 9,340 mm, Machine for punching, embossing, waste stripping and blanking Used machine, overhauled at the QTM Schwalmtal plant System equipped with high-performance sheet feeder for NON-STOP operation ⦁ For fully automatic punching, creasing and embossing with or without gripper edge ⦁ for stripping the inner waste as well as the side and rear sheet edges ⦁ for stacking the punched and stripped sheets with the attached gripper edges or the attached gripper edges or ⦁ for cutting off the gripper edges and then depositing the remaining sheets in stacks remaining sheets ⦁ with a patented gripper carriage register system for maximum register accuracy ⦁ with a bundle stacking machine that features a fully automatic separating sheet feeder and NON-STOP delivery and does not need to be converted even for the smallest blanks. changeover even the smallest cuts. (Shuttle table with comb structure) ⦁ Cut-off sheet magazine with electrical stock control, during production refillable during production Hodpfjt E Nthjx Adaoh ⦁ with Centerline equipment ⦁ with automatic pallet changing device in the storage area ⦁ Modem ⦁ Standard elevation of the machine 600 mm Specification Sheet format max. 1060 x 1450 mm Sheet format min. 500 x 700 mm Maximum punching force 6.0 MN (600t) Speed 8,000 Bg / h Processable materials: Paper min. 80 g/m² Cardboard up to 2000 g/ Corrugated cardboard up to 5 mm (max. sheet curvature 4 %) Features: patented QTM rail system manual non-stop feeder stripping station depaneling station Centerline Fully automatic pallet changing device Deposit incl. platform Upgrade of the control system to Siemens S7 Completely overhauled machine drive Quick-clamping frame in all tool stations

Condition: good (used), Year of construction: 1969, Pneumatic gluing press, Hsdpod Dxqbefx Adash pressure max. 10 bar, gluing bar with heating, gluing surface 550 x 40 mm stepless temperature adjustment for the lower and upper gluing bar from 0 - 300 degrees C, stepless adjustment of the gluing time, drive power: 5 Kw, 380 Volt-50 Hz, two-hand operation SIEMENS. Pressure build-up via articulated lever, max. opening travel approx.30 mm

Condition: used, Fette thread rolling unit T42, cross Hodpfxoft Tk Hs Adajh Please, contact us for getting more informations and pictures on or *

Condition: new, Various inking and dampening rollers for KBA Rapida 142: - no. 374.0101.1 Westland Ink form roller / Farbauftragwalze, Ø 117mm, new (4 pieces) - no. 374.0102.1 Westland Ink form roller / Farbauftragwalze, Ø 123mm, new (2 pieces) - no. 374.0201.1 Westland Ink form roller / Farbauftragwalze, Ø 129mm, new (3 pieces) Hsdpfxsv Ebf Hs Adajh - no. 374.0202.1 Westland Ink form roller / Farbauftragwalze, Ø 135mm, new (1 piece) - no. 374.0301.2 Westland Ink vibrator roller / Farbheberwalze, Ø 117mm, new (3 pieces) - no. 374.0401.1 Westland Ink distributor roller / Farbreiberwalze, Ø 117mm, new (3 pieces) - no. 374.0402.1 Westland Ink distributor roller / Farbreiberwalze, Ø 123mm, new (4 pieces) - no. 374.0501.1 Westland Ink distributor roller / Farbreiberwalze, Ø 129mm, new (3 pieces) - no. 374.1005.1 Westland Waterform roller / Feuchtauftragwalze, Ø 135mm, new (5 pieces) - no. 374.1199.1 Westland Metering roller / Feuchtdosierwalze, Ø 130mm, new (3 pieces) - no. 90001067 Ebonit Ink distributor roller / Reiberwalze, Ø 80mm, used (2 pieces) - no. 90008616 Ebonit Ink distributor roller / Reiberwalze, Ø 102.3mm, used (1 piece) - Rilsan Oscillating roller / Beschwerwalze, Ø 60mm, used (1 piece)

Condition: used, machine/vehicle number: 005639, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Hsdpfx Aovw Evgsdash Corner Rounding Unit: yes Combination Squaring Edgebanding Machine: First and Second Pass Max Panel Width: 3000 mm Max feed speed: 50 m/min Operating Units Right Side: 12 nr Operating Units Left Side: 12 nr

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, operating hours: 661 h, Trench roller No. 4 Wacker Neuson RT 82 SC 2, built in 2012, 661 operating hours, weight 1490 kg, Kohler diesel 15.5 KW, serial no. 20140613, radio control + cable, functional Hsdjv I T E Rjpfx Adajh

Condition: good (used), Thread cutting machine, pipe thread cutter -for: Pipe size max. 2 inches -Cutting jaws: 2" inch -Drive: via 3 gearboxes Hodpeb A Iwcjfx Adaoh -Dimensions: 550/360/H240 mm -Weight: 55 kg

Condition: used, machine/vehicle number: 154, mileage: 54,338 km, power: 140 kW (190.35 HP), first registration: 11/2022, fuel type: diesel, empty load weight: 5,450 kg, maximum load weight: 2,040 kg, overall weight: 7,490 kg, tire size: 235/75r17,5, axle configuration: 4x2, wheelbase: 4,200 mm, next inspection (TÜV): 01/2027, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space length: 6,080 mm, loading space width: 2,440 mm, loading space height: 2,480 mm, Equipment: air conditioning, cruise control, navigation system, onboard computer, parking heater, spoiler, tail-lift, trailer coupling, Full and emergency brake assist, exterior sun visor, electr. heated and adjustable mirrors, camera preparation, MAN Easy Control, LDW, 7" media system Hjdpfx Adsqa Dmceajh Errors excepted, subject to prior sale/rental, location may vary

Condition: used, mileage: 7,276 km, gearing type: automatic, fuel type: electric, color: red, overall weight: 3,140 kg, empty load weight: 2,360 kg, maximum load weight: 1,500 kg, lifting height: 3,010 mm, tire size: 18X7-8, number of seats: 1, first registration: 11/2013, emission class: none, suspension: other, Year of construction: 2013, operating hours: 7,276 h, total length: 2,580 mm, driver cabin: other, construction height: 2,060 mm, fuel: electricity, load capacity: 1,500 kg, The Toyota 7FBEST 15 is a used 3-wheel forklift designed for professional industrial use. Equipped with a 2021 electric battery, it offers environmentally friendly and efficient performance. The forklift has 7,276 operating hours and is in excellent condition. The forklift features an automatic transmission and comes in a striking red color. It has a height of 2,055 mm, a width of 990 mm, and a length of 2,580 mm. The gross vehicle weight is 3,140 kg, and the vehicle is designed for one seat. This model is ideal for use in warehouses and tight working spaces. Viewings are possible without prior appointment, and deliveries within Germany can be arranged for an additional charge. Hodper Uzrvjfx Adaeh Sale only to commercial customers (agriculture, freelancers, small and large businesses) or export. Errors and prior sale excepted.