Used Zlomiarze Recycling Separator for sale (7,389)

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Why a water system? Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Separation of metals in cable and non-ferrous metal recycling lines The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Description of action: The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Construction description: Dcjdpfoua Tbwjx Akcog The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order.

Year of construction: 2022, condition: new, The MDS-1 Electric Motor Recycling Machine designed to accurate copper extraction from stator insert of electric motor with different types of diameter. Description: The machine use steel claws to extract copper from the stator shell during backward movement. Stator fixed on special rollers mounted on lifted platform, a holder located in front of the machine keeps the stator from moving. Steel claws release copper when the operator pulls leaver backward. The machine fitted on solid frame, equipped with two sizes of hydraulically operated claws, holder and lifting platform with rollers. Technical information: • Engine power – 11 kW • Maximum engine diameter – 690 mm • Minimum engine diameter – 150 mm • Two types of clamping jaws • Foot switch • Weight – 1250 kg Dcsdpfshix N Aex Akceg • Dimensions – 2950 × 1150 × 1250 mm • Control panel with an electrical security system

Year of construction: 2024, condition: new, functionality: fully functional, Description of Use: Overband Magnetic Separator (MAGNETIC series) is applied to loose materials to automatic removal of ferrous impurities in the process of waste recycling. Apart from metal recovery the Separator has a protective function for equipment in further steps of recycling process. They are usually installed on top of transport conveyors. Belt separators are used in many fields: -scrap removal from coal and aggregate -wood and plastic purification -iron particles recovery from cable shredding Djdpfx Aeh D H Rcekcocg -iron rejection from WEEE recycling process -municipal waste purification Contact us for more information

Condition: new, Year of construction: 2024, ZŁOMIARZE Recycling Technology MCW 52/76 Shredder The MCW series quad shaft shredder is based on many years of experience in the plastics and scrap industry. MCW Shredder is a highly reliable, universal pre-shredder for shredding a wide range of materials such as plastics, materials, rubber, wires, electronic scrap, post-production waste as well as slight magnetic materials. Dedpfx Aohix Hrskcjcg Types of MCW Shredders: MCW-52 Technical Specification: • Motor output – 22 kW • Cutting Chamber – 510 × 760 mm • Performance – approx. 400 kg/h (depending of material type) • Weight – approx. 1400 kg MCW-76 Technical Specification: • Motor output – 37 kW • Cutting Chamber – 965 × 780 mm • Performance – approx. 800 kg/h (depending of material type) Additional equipment: • Loading belt conveyor • Dust Extraction • Magnetic Plate with Quick Clean System • Magnetic Separator SM-370 • Unloading Belt Conveyor Contact us for more information!

Year of construction: 2024, condition: new, WPS Eddy Current Separator, Magnetic Series. Eddy Current separators from the Magnetic Series are mainly used in the waste recycling industry. The use of eddy currents allows for the recovery of non-ferrous (non-magnetic) metals from loose waste such as aluminium, copper, brass etc. The WPS separators are characterized by high separation accuracy due to the original solutions by ZŁOMIARZE, which guarantees high profitability of waste recycling. WPS Separators are used in the recovery of: • non-ferrous metals from the recycling of electronic waste • non-ferrous metals from car recycling • metals from foundry waste • aluminium in glass recycling processes • non-ferrous metals from steel waste • non-ferrous metals from municipal waste To ensure the longevity of the equipment, the ZŁOMIARZE, as one of few companies, has introduced an improvement in the form of the central cooling of the bearings of the magnetic rotor, thanks to which the service life of the machine has been extended even several times. Technical Specification: • Magnetic field source – NdFeB magnets • Smooth adjustment of magnetic rotor speed – 0-3000 rpm • Belt speed adjustment • Belt position control system • Magnetic rotor cleaning cleats • Belt cleaning scraper • Material divider adjustable in two levels • Bearing cooling system (greatly extends bearing life) • Control panel with safety check For our non-ferrous metal separator we offer additional devices to make you separation process easier: • vibratory feeder • belt conveyors • magnetic drum/belt separators Dsdpfx Aksiqxtbecscg For more information please download our catalog. If you're interested in our products, please contact us!

Year of construction: 2024, condition: new, ZIGZAG air separators Application description: ZIGZAG type air separator is a device designed to purify materials in the waste recycling process. The separator separates light fractions from heavy fractions by pneumatic method. It works well with a wide range of waste materials of 0-150mm size. Air separators of this type are used for pre-ground, jagged or very fine materials. Thanks to our unique design, the separator has the ability to adjust at many points that are important for the purity of the received fractions. ZIGZAG type separators are used in many areas: weight classification of metal granules purification of shredded scrap from the light fraction (films, plastics, paper) removal of volatile fraction during recycling of WEEE purification of plastics, rubber purification of municipal waste, glass removal of dust Dcodeua D Alepfx Akcog Construction description: The ZIGZAG separator consists of individual components mounted on a common support structure. In the first part, the ZIGZAG module is installed. The module has an inspection hole and regulation of the material stream passage gap. In the second part there is a cyclone discharging the light fraction. Underneath the cyclone there is a variable speed sluice for ejection of separated materials. A fan with electronic speed control is located on top of the structure. The structure is designed in part for loading and unloading by conveyor belts. The separator has a control cabinet equipped with a safety system.

Condition: new, power: 27 kW (36.71 HP), Year of construction: 2025, Mizar Densimetric Separators efficiently separate materials based on their density differences. This technology is ideal for separating materials of different densities in recycling processes, offering superior performance, especially in applications where metals and plastics need to be separated. Dcedpfx Aswm Apnskcsg The DES Series is equipped with precise adjustment mechanisms and high-performance fan systems, optimized down to the finest detail. As a result, low-density materials collect at the back, while high-density materials like copper accumulate at the front, ensuring effective separation. In addition to energy efficiency and low operating costs, the automation systems and user-friendly control panels make the processes easy to manage.

Condition: new, Year of construction: 2025, inner diameter: 370 mm, inner dimension length: 1,300 mm, The Mizar Electrostatic Separator is a high-performance machine designed to precisely separate fine materials from mixed recycling streams. By utilizing electrostatic charging, it efficiently distinguishes between conductive and non-conductive particles, making it ideal for complex materials like plastics, metals, and minerals. ✅ High Material Purity – Ensures exceptional separation and product quality. ✅ Customizable Operating Parameters – Tailors to specific recycling needs and material types. ✅ Energy-Efficient – Optimizes energy consumption and reduces operational costs. ✅ Ideal for Final Stages of Recycling – Refines materials for downstream applications. ✅ Durable & Low-Maintenance Design – Built for consistent performance with minimal downtime. Technical Specifications Drum Length: 1300 mm Drum Diameter: 370 mm Heaters: 4 units, 1000 Watts each Drum Motors: 2 units, 1.1 kW each Feeding Screw Conveyor: 1.5 kW, with speed controller Vibration Motor: 0.37 kW, with speed controller Electric Components: Siemens Hydraulic Components: Bosch Rexroth 1 Year Guarantee Dcodpowbuyhjfx Akceg

Condition: new, Year of construction: 2025, overall weight: 700 kg, power: 17 kW (23.11 HP), Mizar Zig-Zag Separators are designed to efficiently separate light and heavy materials using an air-based zig-zag flow system. This advanced technology ensures a high level of precision in material separation, making it ideal for plastic, metal, and composite recycling processes. ✅ Efficient Airflow Technology – Effectively separates materials based on weight and density. ✅ High Precision & Consistency – Ensures accurate sorting for optimal recycling results. ✅ Energy-Efficient & Durable – Designed for long-term industrial use. ✅ Easy Integration – Compatible with existing recycling systems. 🔸 Technical Specifications 🔹 ZZS M1 Power: 17 kW Length: 2000 mm Width: 1250 mm Height: 4180 mm Weight: 700 kg Dcjdpfx Akev Hm I Nscjg

Condition: used, Technical information: - Engine power - 11 kW - Maximum engine diameter - 690 mm - Minimum engine diameter - 150 mm -Two types of clamping jaws - Foot switch - Weight - 1250 kg - Dimensions - 2950 × 1150 × 1250 mm - Control panel with an electrical security system Dedpjvuqn Nsfx Akcocg For further information please refer to the technical data sheet or request it.

Year of construction: 2000, condition: new, Separation screen ALLGAIER ARSM 31-2, suitable for screening, separation, and recycling. Dcsdpfx Akex Hh H Eecog

Condition: new, functionality: fully functional, power: 300 kW (407.89 HP), overall weight: 65,000 kg, tire size: 6*2, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, axle configuration: 3 axles, emission class: euro3, Year of construction: 2026, machine/vehicle number: V9638J96, Equipment: all wheel drive, hydraulics, onboard computer, Sand and Gravel Production Plant | MINGYUAN Heavy Industrial Equipment A sand and gravel production plant is an integrated system designed for producing high-quality construction aggregates, including sand, gravel, crushed stone, and artificial sand. MINGYUAN provides complete aggregate crushing and screening solutions for quarries, mining, construction, and infrastructure projects, ensuring efficient material processing and consistent output. General Introduction The MINGYUAN sand and gravel production line combines advanced crushing, screening, washing, and conveying equipment to process raw materials such as limestone, granite, basalt, river stone, and quartz into various sizes of construction sand and gravel aggregates. The plant typically includes jaw crushers, impact crushers, cone crushers, vibrating screens, sand washers, belt conveyors, and dust collectors, forming a complete and automated production system. It is widely used in road construction, concrete batching plants, building materials, and hydropower projects. Capacity range: 30–1000 tons per hour (customizable) Feed size: ≤800 mm depending on crusher type Output size: 0–5 mm (sand), 5–10 mm, 10–20 mm, 20–40 mm (gravel) Main equipment: Jaw crusher (PE/PEX series), cone crusher, impact crusher, VSI sand maker, vibrating feeder, vibrating screen, sand washing machine, belt conveyor, and control system Power configuration: Electric or diesel-driven options available Automation: PLC control with real-time monitoring and adjustable output ratio MINGYUAN Heavy Industrial Equipment Co., Ltd. provides complete sand and gravel production solutions with reliable performance, competitive price, and professional after-sales service for global customers in the mining, construction, and cement industries. 2. Crushing and Screening: - The extracted raw materials often need to go through crushing and screening processes to reduce their size and separate them into different grades. - Crushers break down large rocks into smaller pieces, and screens sort the particles based on size. 3. Washing: - Washing is a common process to remove impurities such as clay, silt, and dust from the raw materials. This is particularly important for sand and gravel used in construction. 4. Grading and Sorting: - After washing, the materials may go through grading and sorting processes to separate them into different sizes and qualities. 5. Storage and Stockpiling: Dedoq Nia Iopfx Akcocg - Processed materials are often stored in stockpiles for further use. Adequate storage facilities are necessary to manage different grades of materials. 6. Conveying and Transportation: - Conveyor systems are used to transport materials between different stages of the production process. Transportation methods, such as trucks or conveyor belts, are used to move the final products to distribution points. Keywords Sand production line, gravel production plant, aggregate crushing plant, stone crusher, sand making machine, sand washer, vibrating screen, jaw crusher, cone crusher, impact crusher, VSI crusher, quarry equipment, mining machinery, construction aggregates, artificial sand, crushed stone, river gravel, limestone crusher, basalt crusher, granite crusher, sand washing plant, screening plant, conveyor system, MINGYUAN sand plant, aggregate processing equipment, stone crushing line, sand and gravel washing system, high-efficiency crusher, environmental sand plant, aggregate production line manufacturer.

Condition: new, functionality: fully functional, power: 210 kW (285.52 HP), fuel type: electric, color: silver, overall weight: 27,000 kg, empty load weight: 27,000 kg, operation weight: 36,000 kg, maximum load weight: 50,000 kg, tire size: 6*2, tire condition: 100 %, axle configuration: 3 axles, Year of construction: 2026, machine/vehicle number: MYM-J57C90, Equipment: hydraulics, low noise, rubber tracks, Mobile Crusher: Smart C&D Waste Recycling Solution Turn Demolition Debris into Profit Construction and demolition waste accounts for 30-40% of global waste. Our mobile crushing solution processes C&D waste on-site, transforming costly debris into valuable recycled aggregates. Technical Specifications 900×1060 Mobile Jaw Crusher Crusher Unit: Jaw opening: 900mm × 1060mm Max feed size: 750mm Output size: 75-200mm (adjustable) Capacity: 80-180 TPH Power: 90-110 kW Vibrating Screen: 2-deck or 3-deck configuration Screen area: 3.6-4.8 m² Motor power: 15 kW Produces 3-4 aggregate sizes simultaneously Feeder: Belt width: 1000mm Variable speed: 0-25 m/min Power: 7.5 kW Hopper capacity: 5-8 m³ Overall: Dimensions: 12-14m (L) × 2.8-3.2m (W) × 3.8-4.2m (H) Weight: 38-45 tons Total power: 120-150 kW Fuel consumption: 25-35 L/hour (diesel option) What We Process ✓ Concrete (plain & reinforced) ✓ Asphalt pavement Dcedpoq Nf Tvofx Akcjg ✓ Bricks and masonry ✓ Tiles and ceramics ✓ Mixed demolition debris ✓ Road construction waste Complete Recycling Process 1. Feeding Large hopper (5-8 m³) receives mixed C&D waste up to 750mm 2. Primary Crushing 900×1060 jaw crusher reduces material to 75-200mm with 4-6:1 reduction ratio 3. Magnetic Separation Automatic removal of steel rebar (>95% recovery rate) 4. Screening Multi-deck screen produces multiple grades: 0-5mm (sand) 5-10mm 10-20mm 20-40mm 5. Dust Control Integrated water spray system (8-12 nozzles) achieves >90% dust suppression Key Features Mobility: Track-mounted: Self-propelled, 0.8-1.2 km/h Wheel-mounted: Highway transportable Setup time: 30-60 minutes 360° working radius Automation: PLC control system Remote operation (50m range) Real-time monitoring Automatic overload protection Performance: Concrete: 120-150 TPH Asphalt: 100-130 TPH Mixed waste: 80-120 TPH Screening efficiency: >95% Output Products Recycled Aggregates: 0-5mm: Concrete, mortar (15-20% output) 5-10mm: Asphalt mix, drainage (20-25%) 10-20mm: Concrete, road base (25-30%) 20-40mm: Sub-base, backfill (25-30%) Applications Building demolition Highway reconstruction Bridge dismantling Airport runway recycling Disaster debris management Urban renewal projects Service Package Included: Factory testing Installation supervision Operator training (3-5 days) 12-month warranty Lifetime technical support Spare parts availability Get Started Transform C&D waste from cost to profit. Our 900×1060 mobile crusher delivers proven performance, exceptional ROI, and environmental sustainability. Contact us for: Detailed specifications Custom configurations Site assessment Equipment demonstration Competitive quotation Make waste work for you. Choose proven mobile crushing technology for sustainable C&D recycling.

Year of construction: 2026, condition: new, To separate and sort after the specific weight from light and heavy fraction. Useable for grain, aluminium/plastic, rubber/textile, cable-recycling, etc. Dcode Snd Nepfx Akcsg Type and size are selectable, depending on the product and throughput. At constant machine length, it is possible to choose between working width from: 450mm, 600mm, 900mm.

Condition: new, Year of construction: 2026, overall weight: 4,750 kg, rotor diameter: 350 mm, number of blades: 62, total length: 1,850 mm, total height: 2,170 mm, total width: 2,670 mm, rotor length: 920 mm, rotor width: 350 mm, power: 50 kW (67.98 HP), warranty duration: 12 months, blade width: 50 mm, blade diameter: 50 mm, MIZAR SSH Series - Single Shaft Shredder / Einwellenzerkleinerer for Cables, Plastics & E-Waste Controlled Size Reduction with Intelligent Feeding System The MIZAR SSH Series is engineered for efficient and controlled shredding of a wide range of materials including cables, textiles, plastics, tires, electronic scrap, and various metal types. Designed for reliability, flexibility, and consistent output size, SSH shredders are ideal for recycling facilities requiring uniform material preparation before granulation or further processing. SMART SHREDDING TECHNOLOGY & ADVANTAGES • Single Rotor – Maximum Control: Customized high-alloy wear-resistant steel blades mounted on a robust single shaft ensure aggressive intake and efficient size reduction across mixed material streams. Dcjdpfxjg Dcq Tj Akceg • Programmable Hydraulic Pusher: An intelligent hydraulic feeding system continuously pushes material toward the rotor, optimizing throughput and preventing idle rotation. • Automatic Anti-Jam System: In case of overload or blockage, the rotor automatically reverses direction. This protects the machine and ensures uninterrupted operation. • Screen-Controlled Output Size: A heavy-duty screen located beneath the rotor determines the final particle size. Material remains inside the chamber until it reaches the required dimensions, ensuring a homogeneous output. • Industrial-Grade Components: Siemens/WEG motors, SKF/FAG bearings, and Schneider or ABB electrical systems ensure durability and long service intervals. Fully CE-certified for international compliance. APPLICATION AREAS • Cable Recycling: Copper and aluminum cables, wiring harnesses. • Plastic Materials: HDPE, PET, film, lumps, injection waste. • Electronic Scrap (WEEE): PCBs, electronic components, mixed e-waste. • Textile & Tires: Industrial textile scrap, fabric waste, car and light truck tires (pre-cut). • Metals: Aluminum scrap, radiators, light metal fractions. MODEL RANGE & TECHNICAL HIGHLIGHTS (Please ask for the exact configuration and screen size based on your material) • SSH S1: Compact solution for medium-scale operations. • SSH M1: Balanced performance for diverse recycling needs. • SSH L1: High-capacity industrial model for continuous operation. • SSH XL1: Heavy-duty configuration for the most demanding throughput requirements. Why Mizar SSH? • Precise output size control via interchangeable screens • Stable and intelligent hydraulic feeding system • Reduced downtime with automatic reverse function • Low maintenance design with accessible rotor chamber • Seamless integration into complete recycling lines Need a tailored shredding solution? Contact us for a customized quotation, technical drawings, or send your material for a performance test. Mizar Recycling Machinery

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 3,860 mm, total width: 1,200 mm, total height: 3,000 mm, overall weight: 5,500 kg, warranty duration: 12 months, blade width: 75 mm, power: 60 kW (81.58 HP), rotor length: 770 mm, MIZAR DSH Series - Double Shaft Shredder for Metal, E-Waste & Plastics High-Torque Performance for Demanding Industrial Applications Engineered for continuous operation, the MIZAR DSH Series delivers powerful, low-speed, high-torque shredding performance for the toughest materials. Designed for reliability, built for industrial scale. CORE ADVANTAGES • Drive System: Independent dual shafts powered by heavy-duty planetary gearboxes. High torque at low RPM ensures efficient size reduction with minimized wear. • Industrial-Grade Components: Siemens/WEG motors, SKF/FAG bearings, Schneider or ABB electrical systems. Globally trusted brands for long-term reliability. • Blade Technology: Custom-engineered, high-alloy wear-resistant steel blades [Örn: HARDOX or equivalent]. Optimized cutting geometry for aggressive intake and consistent output size. • Structural Strength: Reinforced steel frame construction for vibration resistance and extended service life. Fully CE-certified for international compliance. APPLICATION FIELDS • Scrap Metal: Aluminum profiles, radiators, light scrap, sheet metal. • E-Waste: PCBs, motherboards, hard drives, mixed WEEE materials. • Cable Recycling: Copper and aluminum cables, wiring harnesses. • Plastic Waste: HDPE pipes, industrial drums, PET, big bags. • Wood & Alternative Fuels: Pallets, MDF waste, pre-shredding for RDF and SRF production lines. Dedpfegwhb Iox Akcecg MODEL RANGE & TECHNICAL HIGHLIGHTS (Please ask for the exact configuration based on your material) • DSH S1: Compact footprint. Ideal for medium-capacity operations. • DSH M1: High-performance all-round solution for diverse material streams. • DSH L1: Heavy-duty industrial powerhouse for large-scale recycling plants. Why Mizar DSH? • High torque without high energy consumption • Modular design for seamless integration into complete recycling lines • Easy maintenance access and quick blade-change system • Built for 24/7 industrial environments Need a tailored shredding solution? Contact us for a customized quotation, technical drawings, or send your material for a performance test. Mizar Recycling Machinery

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, overall weight: 36,000 kg, oil tank capacity: 1,300 l, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Dsdevf E Avopfx Akcecg Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: reconditioned (used), Year of construction: 2000, operating hours: 32,169 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,320 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 750 kg, overall weight: 22,000 kg, oil tank capacity: 900 l, For sale is a complete baling system consisting of conveyor technology, baling press (partially refurbished and tested) and wire stations. Technical data baler: Manufacturer Bollegraaf Recycling Machinery B.V. Typ HBC 60A Year of construction 2000 Hours of operation 32,169 hours, stand November 2024 Press power main press 60 tons Press power of pre-press max. 25 tons Feed channel 1,320 x 1,100 mm Theoretic cycle time 18 sec. Bale size 1,100 x 720 mm, lenght variable Driving motor 45 kW Connected load 60 kW Tying system 5-fold vertical Throughput rate at a bulk weight of 30 kg/cbm approx. 5,5 tons/hour bulk weight of 50 kg/cbm approx. 10 tons/hour bulk weight of 100 kg/cbm approx. 16 tons/hour Bale weight 400 up to 750 kg, depends on material SPS controller Telemecanique TSX Micro Machine weight baler approx. 24 tons Scope of delivery: 1 piece chain belt conveyor 1 Bollegraaf HBC 60A baler with whirling unit 1 maintenance platform with access ladder 2 wire stations with deflection rollers for 10 wire reel stands (without wire) The following repair and overhaul work was carried out: Hydraulic oil tank emptied, cleaned and refilled with new oil Oil filter and air filter replaced Hydraulic block partially resealed Hydraulic hose on hydraulic block replaced Wire entry marks on the floor passages welded shut and smoothed Tying unit cleaned, serviced Electrical system repaired, door flap contact switch partially replaced Whirbulator repaired General maintenance work carried out, lubricated Machine tested during operation, without the use of materials, in manual mode and in automatic mode, see function video Comments: Dcodpfoviwdmsx Akcjg The system has already been completely dismantled, stored and is available for loading at short notice. The documentation (BA, CE, electrical/hydraulic circuit diagram) is available. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Year of construction: 2026, condition: new, functionality: fully functional, ERFOR GR7 Granulator – Efficient Plastic Recycling Solution We offer the ERFOR GR7 granulator – a robust and efficient machine designed for producing high-quality regranulate from plastic materials. An ideal solution for companies looking to process production waste and reduce raw material costs. Key Information: Throughput: up to 700 kg/h Materials: LDPE, HDPE, PP (films, production waste, printed materials) Stable, continuous operation High and consistent granulate quality Simple and reliable operation Equipment: High-performance plasticizing unit Automatic filtration system Granulation system Compact, industrial design Why GR7: Fast return on investment Reduced material losses Reliable and long service life Djdpfoy Eyrdsx Akcocg Configurable to customer needs Condition: New / built to order Manufacturer: ERFOR / Koltex PRS Contact us – we will configure the machine for your material and required capacity.

Year of construction: 2006, condition: refurbished (used), functionality: fully functional, We are offering this refurbished MG Recycling M_04772 cable granulator, year of manufacture 2006. It was fully overhauled in 2024. Dsdpfx Aoy D Ug Tskcecg New control cabinet, new blade sets. Includes Wagner pre-shredder type WS 15, year 2007, 15 kW, feeder belt, extraction system and magnetic vibrating table from 2021. Throughput: approx. 150–180 kg/hour, depending on material. Location: Switzerland, 8260 Stein am Rhein. Asking price: negotiable, EUR 89,000 If you have any questions or require further information, feel free to send us a message or call us.

Condition: used, Year of construction: 2023, operating hours: 1,100 h, functionality: fully functional, machine/vehicle number: C.009088, total width: 5,536 mm, total length: 5,536 mm, total height: 3,500 mm, Equipment: rotational speed infinitely variable, For any further information regarding this listing please contact Dcsdpfxoy Dtyrs Akceg

Condition: new, Mini Cable Recycling Line with a capacity of 50-80kg/h The set includes: 11kW grinding mill - TORNADO 320 Compact dust removal system Belt conveyor Water separator - GOLD RIVER 300/1250 Technical data of the installation: Installed power - 13kW Power supply - 400V; 50Hz Batch efficiency - 50kg/h (this is a real value, checked on basic materials). Dimensions - 3500x3600x1950mm Weight - 950kg Spare consumables included. This is a set of high-quality devices created for cable recycling. The basis of the entire recycling process is proper fragmentation and separation, TORNADO series grinding mills have been designed so that the input material leaves the chamber in a short time, the enlarged sieve area and balanced rotation of the cutting rotor provide us with uniformly cut material fractions. The use of an innovative water system with pressure control valves in GOLD RIVER series separators allows for very precise separation of materials that are difficult to separate. The introduction of a new separation mat solution in combination with several other technical parameters allows for the separation of a single copper wire with a thickness of 15 microns [µm]. At the same time, maintaining the ideal purity of the plastic. Solid Polish workmanship supported by experience ensures a very long service life. The materials used for production are carefully selected in terms of type and meeting the appropriate strength parameters. We provide full post-warranty service throughout the country, we have every part for the offered devices. Recyclable materials: Aluminum cables of all kinds Car harnesses with adhesive insulation Computer tapes Network and telephone cables Coaxial cables, Christmas tree lights Copper wires filled with silicone or gels Dedsv I Skrjpfx Akcecg 15-micron winding coils, contaminated with plastic and sticky paper Winding coils filled with silicone coating IMPORTANT!! We provide real performance!

Condition: new, Year of construction: 2025, overall weight: 150,000 kg, We offer Lines for shredding and separating non-ferrous metals and copper cables. The line can be freely modified according to the customer's needs. The attached visualization is illustrative. Machines included in the line: Drum Belt Magnetic Separator Multi-shaft shredder 2 x 18.5 kW MCW-110 1. Loading conveyor (controlled automatically by shredder, according to load) Technical data: - L – 4000mm -Working width – 720mm - Height – 2100mm - Geared motor – 1.5kW - PVC conveyor belt equipped with straight cleats. - Steel structure, placed on self-adjusting wheels 2. Unloading conveyor (receives the shredded material for further process) Technical data: -L. – 3600mm - Working width - 400mm - H – 2000mm - Geared motor – 1.1kW - PVC conveyor belt equipped with a sealing wave and straight cleats - Structure made of acid-resistant steel, placed on self-casting wheels 3. Magnetic separator – (automatically separates unwanted steel elements from the belt of the unloading conveyor) Technical date: - L – 1400mm - Working width – 380mm - Height – 300mm - Geared motor – 0.55kW - Structure made of acid-resistant steel - PVC conveyor belt equipped with straight cleats - Magnetic plate made of permanent magnets 4. Magnetic plate with quick-cleaning overlay – (separates very small steel elements) Technical date: - W – 490mm - L – 330mm -H- 80mm - Housing made of acid-resistant steel Vibrating feeder PWR-1000 Eddy Current Separator WPS-1000 Discharge conveyor no. 2 of the WPS-1000 separator . Dcedsv I Shdjpfx Akcjg Horizontal shredder RKZ-1200 Dust extraction DUST EATER OPW-400 GoldRiver SWZ-700 Water Separator Automatic plastic receiver Automatic metal vibration receiver.

Condition: new, functionality: fully functional, Year of construction: 2026, RSS 600 series Mono Rotor Shredder new model 2026 18.5kw Screen size in consultation Motor cover, pusherbox guide strips, PLC controlled. Conveyor and/or discharge screw is optional available. suitable for various types of plastic/wood/or other material Delivery in consultation Larger or smaller models also available. Intrested ?, reactions with your name, company name and telephone number. Dcjdpfx Aoirt H Aokcsg

Condition: new, Year of construction: 2026, functionality: fully functional, Drain screw system in any length, diameter, etc, tailored to your needs and requirements of course also available separately. Dcsdpfxst Iwt Uj Akcjg reactions or questions ? please with full name, company name and phone number.