Used Wilo Dl-E 100/145-11/2-S1 for sale (114,242)

Condition: good (used), Wilo DL-E 100/145-11/2-S1 Dry-running twin pump Dry-running twin pump in an inline design for pipe installation or foundation mounting with an integrated frequency converter for electronic control, including constant or variable differential pressure (Δp-c/Δp-v). Design Electronically controlled dry-running twin pump in an inline design with flange connection and automatic power adjustment. Application Pumping of heating water (according to VDI 2035), cold water, and water-glycol mixtures without abrasive substances in heating, cold water, and cooling systems. Equipment/Function Operating modes Δp-c for constant differential pressure Δp-v for variable differential pressure PID control Controller operation (n=constant) Manual operating mode Setting of the differential pressure setpoint Setting of the speed (manual operating mode) Setting of the operating mode Setting pump ON/OFF Configuration of all operating parameters Fault acknowledgment External control functions Control input "Priority OFF" Control input "External pump switchover" (only effective in twin pump operation) Analog input 0-10 V, 0-20 mA for controller operation (DDC) and remote setpoint adjustment Analog input 2-10 V, 4-20 mA for controller operation (DDC) and remote setpoint adjustment Analog input 0-10 V for actual value signal from the pressure sensor Analog input 2-10 V, 0-20 mA, 4-20 mA for actual value signal from the pressure sensor Alarm and display functions Collective fault message SSM Collective operating message SBM Data exchange Infrared interface for wireless data exchange with IR monitor/IR stick Slot for Wilo IF modules (Modbus, BACnet, CAN, PLR, LON) for connection to building automation Safety functions Full motor protection with integrated tripping electronics Access restriction Twin pump management (twin pump or 2 x single pump) Main/reserve operation (automatic fault switchover) Main/reserve operation, pump switchover after 24 hours Addition operation Addition operation (efficiency-optimized peak load switching on and off) Your advantages Energy saving through integrated electronic power adjustment Easy operation thanks to Green Button technology and display Various operating modes: main/reserve operation and parallel operation Configurable fault behavior tailored to heating and air conditioning applications Integrated full motor protection (FMP) with tripping electronics Drive Mains connection 3~380 V, 50/60 Hz 3~400 V, 50/60 Hz Hnsdpewbqrtefx Aitou 3~440 V, 50/60 Hz Motor efficiency class: IE4 Power consumption P1 max: 13000 W Motor rated power P2: 11 kW Current (max) Imax: 21 A Speed max. nmax: 2970 1/min Emitted interference EN 61800-3 Immunity to interference EN 61800-3 Insulation class: F Motor protection class: IP55 Motor protection: FMP integrated Installation dimensions Installation length L0 500 mm Suction-side pipe connection DNs DN 100 Pressure-side pipe connection DNd DN 100 RRP: €29,006.25 More new and used items can be found in our shop! International shipping costs on request!

Condition: new, Wilo MHI403-1/E/3-400-50-2/B pump, serial number: 4024295, unused, 100% functional, scope of supply as shown in the photos. Hnedpfx Aez Adnnsitou

Condition: used, Year of construction: 2015, functionality: fully functional, overall weight: 70 kg, Wilo Stratos circulation pump, double pump, D80/1-12, article no.: 2150586, BL 360mm We offer the circulation pump for sale. Art. no.: 2150586 / 15w16 Voltage: 230V 50/60 Hz PN 6/10 P1: 40-1550 W Installation length: 360mm ︎ The heating pump, which we recently disassembled and was functioning perfectly until removal, is ready for use and in the condition shown in the pictures. ︎ Runs extremely quietly and smoothly. ︎ Further technical data: See photos. ︎ Scope of delivery as shown in the pictures. Description: Hnjdpfxey Szfxo Aitju The item offered here is in good condition. Inspection before purchase is possible and is highly recommended. All our items are disassembled, cleaned, and visually inspected for damage by qualified personnel from our company before sale. Please refer to the description and the pictures for all relevant data/information about the item. All information is provided to the best of our knowledge and belief; the offered goods are sold as described and after inspection. Shipping is possible, but the buyer pays the shipping costs. Shipping and packaging: €70 #Shelf 23-7-1 International buyers welcome Please ask for shipping costs to Europe and overseas.

Condition: excellent (used), I am offering a circulation pump from the renowned brand WILO, model TOP-E 40/1-10, equipped with electronic control. The pump is intended for heating systems, HVAC, and industrial applications. It features an electronic module with a display and operation adjustment, which allows for the optimisation of energy consumption and performance. 🔧 Technical data: Manufacturer: WILO Model: TOP-E 40/1-10 Power supply: 230V / 50 Hz Type: electronic circulation pump Connection diameter: DN40 (approx. 40 mm) Insulation class: F Degree of protection: IP43 Pressure: PN6 Medium temperature: up to 110°C Rotation speed: 850 – 2850 rpm Power: 30 – 570 W Current: 0.45 – 4.80 A 📦 Condition: Used item. Shows normal signs of use but is in good technical condition and fully functional. Hnjdpfjz Smucsx Aitsu 📌 Additional information: Electronic operation regulation High-quality workmanship – made in the EU Ideal for central heating, industrial, and circulation systems Robust construction

Year of construction: 2021, condition: excellent (used), functionality: fully functional, machine/vehicle number: C115101, Four CSF Inox (Italy) hygienic centrifugal pumps, year 2021, professionally decommissioned from an INEOS production facility by qualified engineers. In service for under 12 months — excellent, near-new condition. Four pumps available across three models: 1 x CS 32-110-2-1/BD — 0.75 kW, 1–12 m³/h at 1.6 bar, 1.5" tri-clamp 2 x CS 32-145-2-1.5/BD — 1.1 kW, 1–13 m³/h at 2 bar, 1.5" tri-clamp 1 x CS 50-175-2-10/BD — 7.5 kW, 1–54 m³/h at 4.1 bar, 2.5" inlet / 2" outlet tri-clamp All units: 316L stainless steel, 6-vane open impeller, EHEDG/3A hygienic design. ATEX pump II 3G Ex h IIB T4...T3 Gc with Orange1 Ex db IIC T4 Gb flameproof motors, IP66, inverter duty. Suitable for solvent, fragrance, cosmetics, food, beverage and pharmaceutical duties in hazardous areas. Available individually or as a set. Hnodpfjzmt Ufsx Aiteu Tracht Ltd supplies hygienic and sanitary process equipment. Viewings by appointment; collection and delivery can be arranged. Sold EXW Manchester, UK. Price on request. Please send an enquiry for individual quotes or a package price for the full set — we respond quickly.

Condition: excellent (used), Year of construction: 2024, For sale: Professional water treatment and preparation unit – UWS Heaty Profiline 100 No 2. This is a mobile device designed for use in heating systems, water installations, and HVAC service. Perfect for flushing, filling, and treating installations. Equipment is in excellent technical condition, fully complete and ready for operation. ⚙️ Technical data: Manufacturer: UWS Technologie GmbH Model: Heaty Profiline 100 No 2 Year of manufacture: 2024 Power supply: 230 V / 50–60 Hz Power: 0.5 kW Weight: approx. 59 kg Max. operating temperature: 80°C Max. pressure: 6 bar 🔧 Equipment features: - Integrated tank - High-quality EBARA pump - Flow meters - Pressure gauges - Control valves - Mobile transport trolley - Documentation and accessories (as seen in the photos) 🔍 Condition: - Used device - Very good technical condition - Minor, normal signs of use - Fully complete ⚠️ Remarks: - One pressure gauge has a damaged housing/cover (visible in the photos) - Operation of this pressure gauge has not been checked - The part can be easily replaced if needed 📦 Applications: - Heating installations - Water installations - Service and cleaning of installations - HVAC systems Hnedpfoz Smqdsx Aitju 🚚 Delivery: - Pallet shipping available - Collection in person possible

Condition: refurbished (used), Year of construction: 2021, operating hours: 850 h, functionality: fully functional, Honing: Hedswfdbcopfx Aitjnu R 220 euro R 220 EC R 420 EC R 620 R 360 So DL R185 EC-KF Rcc4 Set Blasting: RSKI 1000 RSKI700-3d-atex RT 250 euro AM: C1 M1 M1 Basic S1 In addition to the machines mentioned and shown, we have many other machines and accessories (blasting systems, conveyor belts, and small machines) available in stock. The machines can be purchased or rented. Contact us for (free) advice on honing, tumbling, and blasting technology.

Year of construction: 2012, condition: ready for operation (used), functionality: fully functional, A complete cooling water unit that was used for cooling screw compressors. Pump unit with machine frame, consisting of: - 3 x Grundfos CRNE45-2-2 A-F-G-V-HQQV centrifugal pumps (Year of manufacture: 2012) Q = 45 m³/h, H = 30.6 m, P2 = 5.5 kW - 6 x manual stainless steel shut-off butterfly valves DN 80 - 3 x basket strainers DN 80 - 3 x check valves DN 80 - 1 x pressure relief valve - 2 x Rosemount GP6 S22 C1 pressure transmitters - 6 x stainless steel gauges Cl. 1 - 1 x GRP pipe - 1 x mounting frame Hnjdpfsywuihsx Aitju Dimensions: Length: 2400 mm Width: 2000 mm Height: 1400 mm Weight: 780 kg Heat exchanger unit with frame, consisting of: - 2 x bolted plate heat exchangers, Funke Apparatebau GmbH (Year of manufacture: 2001) Type: FPS 21-100-1-E Volume: 29.2 / 29.8 liters Max. operating pressure: 10 bar Max. temperature: 80°C - 8 x manual intermediate flange shut-off butterfly valves, stainless steel - 1 x KSB BOA electric valve with Auma SAR actuator and MATIC head, including Harting connector - 2 x PT 100 sensors - 6 x analog thermometers, stainless steel Cl. 1 - 2 x PE pipework with bends 110x65mm Gerodur - 1 x expansion vessel - 1 x mounting frame Dimensions: Length: 2200 mm Width: 2000 mm Height: 2000 mm Weight: 1500 kg

Condition: used, Year of construction: 2008, Technical details: max. workpiece diameter: 29 mm Hsdolqac Sepfx Aitsnu min. workpiece diameter: 26 mm workpiece length: 66 mm the system was originally delivered for the following workpiece sizes: diameter 26mm - 29mm length 65mm - 66mm Changing parts in the clamping device, handling, etc. would probably result in diameters of up to approx. Ø50mm Total length will probably be almost 400 mm possible with a few conversions. Also dependent on tool lengths, machining lengths on the component, etc. *

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, clamping force: 1,100 kN, screw diameter: 35 mm, clearance between the columns: 470 mm, displacement volume: 144 cm³, injection pressure: 2,000 bar, injection weight: 132 g, mold height (min.): 350 mm, ejector stroke: 150 mm, Clamping force: 110t Year of manufacture: 2017 Injection shot weight: 132g Injection unit 290 + 100 (2K) Screw diameter: 35 mm Specific injection pressure: 2000 bar Injection volume: 144 ccm Injection shot weight: 132 g Mold clamping unit 1100 Clamping force: 110 t Distance between tie bars: 470 x 470 mm Hnodpfxjz Ef N As Aitsu Mold height: 350 mm Opening stroke: 450 mm Ejector stroke: 150 mm Control: Selogica direct Two-component injection molding machine with a KUKA robot Equipment: - Only ABS and PP were processed - 2nd injection unit EUROMAP 100 vertical (injection into the parting line) - Selogica direct control with a 15" touchscreen - Hydraulics with accumulator (100 l pressure accumulator), injection during mold closing - Control of a hydraulic rotary unit + 3 core pulls - Hydraulic ejector, blow unit - 6 heating circuits for the mold/hot runner - 6-circuit water distribution manifold for cooling - Min. mold height 350 mm, tie bar extension 100 mm, machine raised by 100 mm - KUKA KR6 robot (operated via Selogica) with enclosure

Condition: used, Electric dual-screw unit with automatic feed and pneumatic double stroke, mounted on a handling device, handling system, or manipulator for screwing applications. Screw unit: BÖLLHOFF / BOSCH REXROTH, type UVS-100-2-R-E The Böllhoff Uniquick Vario UVS-100-2-R-E dual-screw unit has a pneumatic double stroke controlled by Festo valves and cylinders. Various monitoring systems are also installed for complete automation. Screwdriver 1 consists of the following components: Rexroth, type: Servomotor Rexroth, type 0: Planetary gearbox Rexroth, type 0: Encoder Rexroth, type 0: Inline gearbox Screwdriver 2 consists of the following components: Rexroth, type: Servomotor Rexroth, type 0: Planetary gearbox Rexroth, type 0: Encoder Rexroth, type 0: Offset gearbox Dimensions (W x H x D): 165 x 1000 x 200 mm Pneumatic long stroke: 30 mm Pneumatic short stroke: 20 mm Screwdriver spring stroke: 20 mm Last used screws: M6 x 15 mm Electric screwdriver unit Rexroth Servomotor Rexroth Type: EC302 SZ3 Material number: 0 Torque: 0.6 Nm/A Peak torque: 0.7 Nm Speed: max. 20,000 rpm Current consumption: max. 7 A Weight: 0.8 kg Gearbox unit Rexroth Type: 3GE27 SZ3 Material No.: 0 Hsdpfxefx Hyfs Aitsnu Efficiency: 90% Gear ratio: i=18.9 Torque: max. 10 Nm Weight: 0.4 kg Installation length: 65.5 mm Encoder Rexroth Type: 2DMC012 SZ2 Material No.: 0 Nominal torque: 12 Nm Gear ratio: 1 Efficiency: 1 Weight: 0.55 kg Installation length: 118.5 mm Inline gearbox Rexroth Type: 2GA82 SZ2 1/4"SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Maximum torque: 10 Nm Gear ratio: 1 Weight: 0.2 kg Installation length: 90 mm Offset gearbox Rexroth Type: 2VNA82 SZ2 1/4"SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Maximum torque: 10 Nm Gear ratio: 1 Weight: 0.6 kg Installation length: 153 mm Handling system: JÄGER HANDLING Type: Handy-flex 300 Horizontal movement: 400 mm Vertical movement: 450 mm Load capacity: max. 14 kg Handyflex reach: 250 to 650 mm Handyflex reach when pivoted up: max. 860 mm Rotation radius at full reach: max. 360° Vertical guide column: Ø 30 mm Horizontal guide columns: Ø 20 mm - Balancer for vertical movement - Adjustable load capacity - Adjustable stop for radius limitation Dimensions (L x W x H): approx. 1150 x 650 x 1400 mm Total weight: approx. 90 kg Good condition Without the blue steel pallet as a base plate The blue steel base plate is not included in the scope of supply.

Condition: used, Electric dual-screw unit with automatic feed and pneumatic double stroke BÖLLHOFF Type UVS-100-2-R-E The Böllhoff Uniquick Vario UVS-100-2-R-E dual-screw unit has a pneumatic double stroke via Festo valves and cylinders. In addition, various monitoring systems are installed for complete automation. Technical data: Torque of electric screwdriver: 0.6 Nm Torque of gearbox: max. 10 Nm Speed: max. 20,000 rpm Rated voltage: 3~ 0-230 VAC Current consumption: max. 7 A (per screwdriver) Pneumatic long-stroke cylinder: 80 mm Pneumatic short-stroke cylinder: 20 mm Pneumatic total stroke: 100 mm Screwdriver spring stroke: 20 mm Distance between the two screwdriving tools: 73 mm - equipped with a TORX bit T27 or TP27 (presumably for M6 screws) - a Bosch Rexroth LT303 power module is required to operate the screwdriver. (Power module not included) Screwdriver 1 and 2 each consist of the following components: Rexroth Type Servo motor Rexroth Type 0 Planetary gearbox Rexroth Type 0 Encoder Rexroth Type 0 Straight gear Component details: Electric screwdriver unit Rexroth Servo motor Rexroth Type: EC302 SZ3 Material number: 0 Hjdpfohxvu Esx Aitjnu Torque: 0.6 Nm Peak torque: 0.7 Nm Speed: max. 20,000 rpm Current consumption: max. 7 A Rated voltage: 3~ 0-230 VAC Weight: 0.8 kg Gearbox unit Rexroth Type: 3GE27 SZ3 Material No.: 0 Efficiency: 90% Gear ratio: i=18.9 Torque: max. 10 Nm Weight: 0.4 kg Installation length 65.5 mm Encoder Rexroth Type: 2DMC012 SZ2 Material No.: 0 Rated torque: 12 Nm Gear ratio: 1 Efficiency: 1 Weight: 0.55 kg Installation length: 118.5 mm Straight gear Rexroth Type: 2GA82 SZ2 1/4"SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Maximum torque: 10 Nm Gear ratio: 1 Weight: 0.2 kg Installation length: 90 mm A motor connection cable of 7m is included. Overall dimensions W x H x D: approx. 180 x 920 x 300 mm Total weight: approx. 20 kg good condition

Condition: excellent (used), Year of construction: 2017, operating hours: 1,600 h, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine Elektrisch Hersteller: DR. BOY Typ: 100E Typ: 552 Baujahr: 2017 Schließkraft: 100 Tonnen Holmabstand (hxv) 430 x 360 mm Einbauhöhe MIN. 250 mm Schnecken DN 1: 42 mm Spritzteilgewicht 1: 157,6 g/PS Schnecken DN 2: 24 mm Spritzteilgewicht 2: 39,1 g/PS Steuerung: PROCAN ALPHA Ausstattung: Hodpozxrc Ssfx Aitsnu 1 x Kernzug Hochschleißfeste Plastifizierungseinheit Steuerung Pneumatische Nadelverschlußdüse Trockner, Hersteller: FARRAG, Baujahr: 2016

Condition: used, Year of construction: 2011, operating hours: 66,800 h, clamping force: 100 kN, displacement volume: 85 cm³, injection pressure: 2,000 bar, overall weight: 4,500 kg, screw conveyor diameter: 30 mm, terms of delivery: FCA Pegnitz delivery time: on request terms of payment: 100% prior to delivery Hodozx Hkkspfx Aitenu

Condition: excellent (used), Year of construction: 2009, Used 3-meter Safan E Brake Type: E Brake 100 3100 TS1 Capacity: 3100 x 100 tons E Control CNC control system Y1, Y2, X, R, Z1, and Z2 CNC control Hedpfszz N R Eox Aitjnu Wila New Standard hydraulic top clamping system Year of manufacture: 2009 New PC installed

Condition: like new (used), Year of construction: 2025, functionality: fully functional, overall weight: 59 kg, load capacity: 10 kg, arm reach: 1,101 mm, controller manufacturer: Kuka, For sale is a modern robotic cell with a KUKA industrial robot, model KR 10 R1100-2 / SEL, from the AGILUS-2 series. The system is in very good, like-new condition and is ideally suited for various automation, handling, assembly, or testing applications. The robot is installed inside a robust, fully enclosed safety cabin made of aluminum profiles with large, transparent protective elements. The cell features an integrated linear/positioning unit and a customer-specific gripper or tool mounting. Due to its compact design, the system can be easily integrated into existing production environments. Technical data of the robot: - Manufacturer: KUKA - Type: KR 10 R1100-2 / SEL - Series: AGILUS-2 - Year of manufacture: 03/2025 - Payload: 10 kg - Reach: 1,101 mm - Robot weight: 59 kg - Article number: 0010028076 - Serial number: 4613832 Hedpfx Aiszznzijtjnu - Origin: Germany The offered unit includes the robotic cell shown in the pictures, including the robot, enclosure, and the mechanics or peripherals installed within the cell, as depicted in the images. The system is suitable, for example, for pick-and-place applications, machine loading, parts handling, assembly, testing, and sorting tasks, as well as a basis for customer-specific automation projects. Condition: very well maintained / like new Year of manufacture of the robot: 2025 Inspection: possible by appointment. Subject to prior sale and errors.

Condition: used, Year of construction: 2017, Arburg 470S 1100 290 injection moulding machine, year 2017 2-component machine The machine has been idle for quite some time. It is from 2017 and has only around 21,600 operating hours. The machine has a clamping force of 1100 kN; the lower unit is a 290 with a 35 mm screw, and the upper unit is a 100 with a 30 mm screw. Hnodpow D R N Rofx Aitsu Only ABS and TPE have been processed so far. The machine is equipped with an integrated hot runner system and 3 core pulls, along with additional options. Included is a Kuka handling unit, which is operated via the Selogica control of the machine, as well as the complete safety enclosure. The two material loaders and the large conveyor belt are not included in the sale.

Condition: good (used), Year of construction: 2001, functionality: fully functional, power: 6.2 kW (8.43 HP), input voltage: 400 V, input frequency: 50 Hz, temperature: 150 °C, total length: 600 mm, total width: 950 mm, total height: 2,000 mm, overall weight: 150 kg, number of chambers: 1, control type: CNC control, Equipment: CE marking, documentation/manual, Tank capacity: 100 liters Heating capacity: 4.5 kW Fan power: approx. 0.85 – 0.95 kW Total power: 6.2 kW Airflow: 90 m³/h Maximum drying temperature: 150 °C Operating voltage: 400 V / 50 Hz Transport height: up to approx. 3000 mm Device weight: approx. 130 – 150 kg Dimensions (W x D x H): approx. 950 x 600 x 2000 mm 3 units available Hedpsy N T Utsfx Aitjnu PRICE REDUCTION FROM 1350 TO 1200 EUR per unit!

Condition: used, Year of construction: 2007, functionality: fully functional, FINN-POWER E-BRAKE 200-4100 TS 1 Fully operational servo-mechatronic press brake, supplied with WILA tooling. Hsdpsz Nx Nfefx Aitsnu ⚙️ Bending force: 200 t / 2000 kN 📏 Working length: 4100 mm 📅 Year: 2007 ⚡ Servo-mechatronic drive – no hydraulics 🛠️ WILA tooling included The machine is in working condition and available for inspection and test bending. 📍 Location: Tukums area, Latvia For further information, photos or videos, please contact us.

Year of construction: 2023, condition: new, El. heated two-track plate pusher furnace, make Riedhammer Hnsdpfxop T T Hne Aitsu type: TP12,75/2x20/15-E-145 condition: as new total length of oven: 15.5 m furnace width: 3.6 m voltage type: 400/230V, 50 Hz connected load: 17 kVA tolerated voltage fluctuation: 10% tolerated frequency fluctuation: 1% PLC: SIEMENS/Comfort Panel TP1500-15 product structure (L x W x H) including push plate: 200 x 200x 101 mm Tmax debinding zone (4 segments): 650 °C Tmax pressure compensation zone (1 segment): 750 °C Tmax main combustion zone (6 segments): 1450 °C Tmax cooling module 1: 600 °C Tmax cooling module 2: 300 °C min. push time: 8 min max push time: 30 min number of conveyor plates: 266 pieces channel height: 105 mm

Condition: good (used), For sale: a used KSB KRTE 100-250/54UG-237 industrial submersible pump, complete with control box, cables, float switch, and chain. The pump is equipped with a side discharge nozzle with a Storz-type coupling and a base for positioning the unit. Data from the nameplate: Manufacturer: KSB Model: KRTE 100-250/54UG-237 Capacity as indicated on the nameplate: 27.78 l/s, approximately 100 m³/h / 1667 l/min Head: 14.8–9.5 m Rated power P2: 5.5 kW Supply: 400/690 V, three-phase Frequency: 50 Hz Rated current: 12.5/7.2 A Maximum medium temperature: 40°C Protection class: IP68 Operating mode: S1 Insulation class: F Power factor cos φ: 0.80 Weight according to the nameplate: 117 kg Pump serial number: 29 140 356 Motor serial number: 052236 Included in the set: Pump with motor. Control box with buttons and switches. Cables. CEE power plug. Float switch. Hsdpfx Ajz Spiwsitenu Chain. Storz-type discharge coupling.

Condition: like new (used), Year of construction: 2020, operating hours: 110 h, functionality: fully functional, working width: 850 mm, area performance: 4,100 m²/h, overall weight: 340 kg, input voltage: 24 V, tank capacity: 130 l, total height: 1,380 mm, total width: 810 mm, total length: 1,460 mm, water tank capacity: 110 l, battery voltage: 24 V, battery capacity: 180 Ah, rotational speed (min.): 170 rpm, empty load weight: 220 kg, For sale in new condition Hyper Xtreme 4100m2/h ride-on floor scrubber dryer Weidner BS1 08500BF / HYPER XTREME 4100 (Basic) For sale in new condition with 104 operating hours, 4100m2/h capacity ride-on floor scrubber dryer, with suction. year of manufacture:2020 Scrub width: 850 mm Suction head width: 900 mm Max working capacity: 4100 m²/h Detergent tank capacity: 110 liters Waste water tank: 130 / 155 liters Speed: 170 Brush pressure: 50 kg Vacuum motor: 480 watts Brush motor power: 2 x 400 W Pressure / vacuum motor: 1300 / 400 mm Traction type / Power: Front motor wheel / 600 W Hjdpfx Aiozf Ix Ajtjnu Pressure / vacuum motor 1300 mmH2O / 400W Dimensions / weight: 146x81x138 cm / 220 kg Electrical system: 24 V Automatic battery charger 24v 4 x 6 V / 240AH working battery dimensions: 146x81x138 cm Weight without battery: 220kg

Condition: excellent (used), Year of construction: 2021, operating hours: 82 h, functionality: fully functional, KUKA KR10 R1100-2 / SEL KRC4 robot 2 units available, 1 with 135 operating hours and 1 with 82 operating hours. Year of manufacture: 10/2021 Hedpfx Aijz Rmi Aetenu Number of axes: 6 Max. payload: 6 kg Max. working range: approx. 1100 mm Scope of delivery: Robot, controller, cables, teach pendant Used item – normal signs of wear and tear. Further details, article numbers and images available upon request. Two weeks commissioning warranty. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with the VAT shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the quantity, weight and desired delivery conditions. Shipping costs to foreign countries on request – please provide country, city and postal code. Freight costs on request – please provide delivery address.

Condition: used, Year of construction: 2007, Wide-belt sanding machine Manufacturer: Kündig Type: Premium-2 1100-RE Year of manufacture: 2007 Technical data: Working width: 1100 mm Hnedozuza Sepfx Aitou Working height (max.): 200 mm Sanding roller Sanding shoe for finish sanding Belt cleaning Vacuum 400 V, 50 Hz, 24 VDC 57.5 amps 28.4 kW Includes loading Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Year of construction: 1999, condition: excellent (used), WIDE BELT GRINDER, 2 UNITS: CONTACT CYLINDER AND GRINDING WHEEL CYLINDER, HORIZONTAL GRINDER, CONTACT CYLINDER MOTOR 15 kW, GRINDING WHEEL CYLINDER MOTOR 7.5 kW, CONTINUOUSLY VARIABLE FEED RATE CONTROL. Hnjdogrdx Ujpfx Aitsu