Used Wilmers Wilog Data Logger for sale (15,930)

Condition: used, inverter, data processing device, data logger Bwjdpfx Aeffk Iiolbet -Manufacturer: Wilmers, wilog Data Logger -Housing: 0903-35-OP303 -Mounting parts: see photos -Dimensions: 500/300/215 mm -Weight: 11.6 kg

Condition: excellent (used), G.i.N. Type: GL5350 GL5350-8H-1R3L G.i.N. Intelligent Data Logger GL5350 Performance meets intelligence Future generations of vehicles will be increasingly equipped with intelligent driver assistance systems, complex multimedia components, and systems for autonomous driving. These complex, networked technologies generate ever-larger amounts of data, making troubleshooting during the development phase more complex and time-consuming. To shorten test drives, reduce their number, and still meet the testing requirements of all departments, the advantages of an intelligent and powerful data logger, such as the GL5300 series, come into play. The GL5300 series covers the time-synchronized recording of LIN/CAN & CAN FD bus systems, FlexRay networks, and Ethernet networks (TCP/UDP/DLT/ADB and Ethernet raw logging). This series also offers the connection of up to 8 cameras and up to 5 GLX504 units for an additional 20 CAN FD channels with SIC transceivers, as well as up to 3 GL5450 units for the synchronous recording of up to 60 100-Base-T1 (30 taps) and up to 18 1000-Base-T1 lines (9 taps). Residual bus simulation Classification unit Gateway CCP/XCP on CAN, XCP on CAN FD, XCP on Flexray, XCP on Ethernet Sending of any, freely configurable messages Selective recording (extensive trigger and filter conditions) Data transfer via LAN/WLAN, USB, and mobile network Operation via menu control Technical data: GL5300 configuration GL5350-8H-1R3L CAN interfaces CAN 2.0 16 CAN FD 4 LIN interfaces 5 Bsdpfx Aozg Tzrolbswt RS-232 interfaces 7 Analog inputs 10 bit 4 Operating voltage +7 V … +50 V Power consumption at 12 V: typ. 10.3 W Current consumption at 12 V: in sleep mode < 2 mA in semi-sleep mode typ. 180 mA in operation typ. 860 mA Operating temperature range -40 °C ... +70 °C Housing: Material side profiles: Al Mg3 Lid: EN AW-6060 (AlMgSiO,5) T66 Decorative strip: ABS Dimensions (L x W x H) 212 x 290 x 80 Weight ~ 3500 g Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, CAN-BUS Digital Data Recorder See also my other offers from the automotive measurement technology sector. 2 units available As shown, without data storage device. Bjdpfx Ajwm Ir Uslbswt BUSDAQ-VW-ET is also known as BUSDAQ-X-ET. CAN nodes: 2-6, 8 on request (extendable with up to 3 MBUS cards; CAN, LIN, ARINC). Baud rate: Max. 1 Mbps. Digital In/Out: 4 (D-sub15). LAN Interface: TCP/IP. External Modem: DSUB9. Storage: Compact Flash. Sync. Plug: BNC. CTRL Plug: DSUB9. Surge protection: 60 V. Supply power consumption: 10-50 VDC, 200 mW.

Condition: used, Frequency converters, frequency converters, drive converters, controllers, variable speed drives, solar cables, inverters, data processing devices, microloggers -Campbell: Scientific SDM-CAN Datalogger -Dimensions: 235/110/H20 mm -Weight: 0.3 kg Bwodpfx Alsfg I D Njbot

Condition: used, 3 units available. See also my other devices from the automotive measurement technology category. Price per unit Bwsdpfx Aswm It Sjlbet without disk 4 CAN interfaces

Condition: defective spare-parts repository (used), Year of construction: 2015, functionality: not functional, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item by September 18, 2026! A forklift will be provided on-site for loading. The machine is defective and is intended as a source of spare parts. TECHNICAL DETAILS Printing technology: Inkjet Color system: 7 colors MACHINE DETAILS Bwodpfozx E Axex Albot Electrical connection data Three-phase connection 1: 3/N/PE, 380–415 V, 50/60 Hz, 14 A SCCR three-phase connection 1: 1.5 kA Three-phase connection 2: 3/N/PE, 380–415 V, 50/60 Hz, 4 A SCCR three-phase connection 2: 1.5 kA Single-phase connection: 220–240 V, 50/60 Hz, 16 A SCCR single-phase connection: 35 kA EQUIPMENT Compliance: CE, KCC Safety approval: TÜV Rheinland – Type Approved Safety

Condition: defective spare-parts repository (used), Year of construction: 2015, functionality: not functional, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item by September 18, 2026! A forklift will be provided on-site for loading. The machine is defective and is intended as a source of spare parts. Bwedpfxjzx E N Se Albjt TECHNICAL DETAILS Printing technology: Inkjet Color system: 7 colors MACHINE DETAILS Electrical connection data Three-phase connection 1: 3/N/PE, 380–415 V, 50/60 Hz, 14 A SCCR three-phase connection 1: 1.5 kA Three-phase connection 2: 3/N/PE, 380–415 V, 50/60 Hz, 4 A SCCR three-phase connection 2: 1.5 kA Single-phase connection: 220–240 V, 50/60 Hz, 16 A SCCR single-phase connection: 35 kA EQUIPMENT Compliance: CE, KCC Safety approval: TÜV Rheinland – Type Approved Safety

Condition: ready for operation (used), functionality: fully functional, MITUTOYO PJ - A3000 Profile Projector Bsdpfx Alszyk Aysbswt -CE marking -Projection screen 315mm with crosshair -Image display: laterally reversed / inverted -Standard - 10x magnification objective -Angle measurement: integrated digital angle display (resolution 0.01 degrees / measuring range +/- 360 degrees) -Optical system type: telecentric optical system for distortion-free measurements -Measuring range approx. 150x50mm -Illumination type: halogen illumination for transmitted light (contour) and incident light (surface) -Data output RS 232 C & data processor QM -DATA 200 included Dimensions L x W x H 0.8 x 0.8 x 1.2 meters / Weight approx. 120 kg Errors and omissions excepted.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, warranty duration: 3 months, Equipment: documentation/manual, Complete Package Including: Bsdpjzq Hu Hefx Albjwt 1 Zoom 90 R 5'' Robotic Total Station with WinCE AiM360, TRack360, and Scout360, 5", accXXess10 EDM 1000M, 1 Long-range Bluetooth handle 500m, 1 Manual in French or English, 2 Li-Ion 4.4Ah batteries, 1 Li-Ion battery charger, 1 Lead-free optical plummet, 1 Industrial-grade SD card, 1GB, 1 Notebook holder, 1 360° prism, 1 Touchscreen tablet, 1 X-Pad topographic software included. Calibration certificate. Suitable for Civil Engineering, Surveyors, Topographers, and Construction. The Zoom90 robotic total station is an ultimate single-operator system, offering up to 20% more automated performance, extended non-prism measurement capabilities up to 1000m, STReAM360, accXess technologies, and open Windows CE connectivity. OPEN CONNECTIVITY Connect your preferred software and data logger to perform remote control tasks without reducing productivity. The Zoom90 uses the Windows CE operating system, which allows the execution of many powerful field software programs. Full VGA color touchscreen, guaranteeing optimal performance and graphic capabilities. TOPOGRAPHY ADVICE Alternative solutions in terms of measurement and software. #Topography #TotalStation #Leica #LeicaGeosystems #TopographicEquipment #UsedTopography #Surveyor #Geomatics #3DScanner #GPS #Theodolite #Monitoring #CivilWorks #ConstructionSite #LaserScanner #Mapping

Condition: like new (used), Binder VD 23 vacuum dryer, ex-demo, like new. Manufacturer's description: PRODUCT DESCRIPTION The BINDER VD series vacuum dryer ensures gentle drying and impresses with precise temperature control. The patented BINDER expansion shelves provide optimal heat transfer. The shelves can be freely positioned, and the chamber is easy to clean. KEY FEATURES Temperature range: Ambient temperature plus 9°C up to 220°C Controller with digital pressure and temperature display Program-controlled drying monitoring with automatic ventilation at the end of the process Internal data logger, measurement values available in open format, readable via USB 1 aluminum expansion shelf, individually positionable Bodpfox S R A Tox Albswt Inert gas connection DN 16 access port – for introducing external measuring instruments Safety glass window, spring-mounted with splash protection Large observation window, optionally with interior lighting PC interface: Ethernet 5 units in stock

Condition: used, Designation: Vibration Test System Manufacturer: Data Physics Model: LE-1216-3VH Force Rating: Sine (5 - 2000 Hz) Random (20 - 2000 Hz) 12000 lbf (53.4 kN) vector 12000 lbf (53.4 kN) rms Frequency Range Full Force Reduced Force Level 5 to 3000 Hz 2500 to 3000 Hz Bjdpfoy Rqiwox Albswt Maximum Displacement (Peak-Peak): Rated Stroke Limit Shock/Bump Continuous or Random Electrical Overtravel Limit Between Mechanical Stops 3.0 in (76 mm) 2.5 in (63.5 mm) 3.1 in (79 mm) 3.2 in (81 mm) Maximum Velocity 71 in/s (1.8 m/s) Maximum Acceleration Sine 100 g vector, 5 to 2500 Hz Random 50 g rms, 20 to 2000 Hz Fundamental Resonance Frequency (Bare Table) 2050 Hz (nom.) Body Suspension Natural Frequency — Thrust Axis: - Vertical: 2 Hz - Horizontal: Below 2 Hz Blower Power (Full Load): 20 Hp, 20 kW; 230/460 V, 3-phase, 60 Hz Alternate Power: 20 Hp, 20 kW; 208/400 V, 3-phase, 50 Hz Air Pressure: Air Spring: - Vertical: 90-100 psig (621-690 kPa) - Horizontal: 2-5 psig (14-34 kPa) Field Specifications: - Rated Current (dc): 64 A - Maximum Voltage (dc): 240 V - Field Resistance at 20°C: 3.2 ohm Stray Flux Density with degauss coil: < 14 gauss at 12 in (304 mm) above table Field Protection: - Rated degauss coil current: 2.6 A (Nominal) - Maximum degauss coil voltage: 120 V Weight: 1216-3VH: 8000 lbs (3636 kg) Power Amplifier Model: DSA10-80 Item condition: Used item as shown in pictures Armature newly rewound Slip table / 40 mm grid M8 760 x 760 Armature bolt circles 8" / 16" M10 Please contact us if you have any questions. Shipping: The quoted shipping costs apply to deliveries within Germany. Worldwide shipping (please inquire for shipping costs outside of Germany). Sale only to commercial customers, without warranty or guarantee. Deviations from technical data and errors in the description of the items may occur and are subject to change.

Condition: excellent (used), Year of construction: 2023, BINDER VD 56 Vacuum Drying Oven with VD-M 53 Pump Module Manufacturer: BINDER GmbH Type: VD 56 Year of Manufacture: 2023 Machine Type: Vacuum Drying Oven Internal Volume: 55 liters Maximum Temperature: 220 °C Offered is a BINDER VD 56 vacuum drying oven from 2023, including a matching BINDER VD-M 53 pump module and a BINDER VAP 1 vacuum pump. The system is designed for gentle drying of materials under vacuum conditions and is particularly suitable for laboratory, research, development, quality control, and industrial process applications. Technical Data: Manufacturer: BINDER GmbH Model: VD 56 Article Number: 9630-0002 Version: VD056-230V Year of Manufacture: 2023 Internal Volume: 55 l Temperature Range: +9 °C above ambient temperature to +220 °C Heating Time to 100 °C: approx. 80 min Spatial Temperature Deviation at 100 °C: ± 1.2 K Temporal Temperature Deviation at 100 °C: ± 0.1 K Leak Rate: 0.01 bar/h Vacuum Connection: DN 16 Measurement Port: DN 16 Rated Voltage: 200–230 V Mains Frequency: 50/60 Hz Rated Power: 1.4 kW Protection Class: IP20 Made in Germany Pump Module: Manufacturer: BINDER GmbH Type: VD-M 53 Article Number: 8012-1943 Year of Manufacture: 2023 Voltage: 200–230 V / 50–60 Hz Power: 1.80 kW Current Consumption: 8.0 A Phase: 1N~ Protection Class: IP20 Vacuum Pump: Manufacturer: BINDER GmbH Type: VAP 1 Article Number: 5013-0217 Year of Manufacture: 05/2023 Pumping Capacity: 2.0 / 2.2 m³/h Ultimate Pressure: < 7 mbar Voltage: 230 V Frequency: 50/60 Hz Current Consumption: 1.6 / 1.5 A Protection Class: IP40 Dimensions: Bodpfozt R D Rsx Albowt VD 56 without attachments and connections: Width: approx. 638 mm Depth: approx. 461 mm Height: approx. 815 mm Internal Dimensions: approx. 400 × 343 × 400 mm (W × D × H) Net Device Weight VD 56: approx. 96 kg Maximum Load per Shelf: 20 kg Maximum Total Load: 60 kg Equipment: Digital controller with pressure and temperature display Program-controlled drying monitoring Automatic ventilation at the end of the process Internal data logger Ethernet interface Universal ventilation for inert gas or ambient air Vacuum connection DN 16 Measurement port DN 16 Safety glass pane with splinter protection Large viewing window Insert shelf BINDER VD-M 53 pump module BINDER VAP 1 vacuum pump Vacuum and connection hoses Connecting and mounting parts Operating and assembly instructions Further accessories as shown in the pictures Shipping Data: Weight VD 56: approx. 96 kg Due to size and weight, shipping by freight forwarder is required. Condition: Used Year of Manufacture 2023 Optical condition as shown in the pictures Nameplates are present Scope of Delivery: 1 × BINDER VD 56 Vacuum Drying Oven 1 × BINDER VD-M 53 Pump Module / Pump Cabinet 1 × BINDER VAP 1 Vacuum Pump Vacuum and connection hoses Connecting and mounting parts Connection cables Operating and assembly instructions Accessories as shown in the pictures The unit is available for short-term delivery. Scope of delivery as shown in the pictures. Subject to change, errors and prior sale.

Year of construction: 2013, condition: good (used), BHT INNOVA E3 Professional Bronchoscope Washer INNOVA – Professional Endoscope Washer for Practices and Small Clinics The INNOVA™ E3s is the world's best-selling BHT endoscope washer. This endoscope washer is compact and offers a high capacity for endoscopes or bronchoscopes. Depending on the reprocessing, a total of 10 to 20 endoscope reprocessings are possible daily. This makes it the perfect solution for private medical practices and small clinics that value safe hygiene, efficiency, and reliability. Reliability and maximum cleanliness in every cycle: Compliant with DIN EN ISO 15883-1/-4 and the guidelines of the Robert Koch Institute (RKI), and with many additional functions, e.g., thermal self-disinfection at 90°C according to DIN EN ISO 15883-4, 4.8.1. - Flexible in combination with another INNOVA® E2 or E3 for 30 to 40 reprocessings daily. - Suitable for both glutaraldehyde and peracetic acid from a wide range of suppliers. - Suitable for commercially available endoscopes from Fuji, Olympus, Pentax, Storz, and Wolf. - Single-channel connection or patented pressure chamber available. - Thermal reprocessing option, e.g., for multiple biopsy forceps, polyp loops, etc. - Thermal disinfection of the final rinse water as recommended by the Robert Koch Institute (RKI) for the DH version. - Secure documentation and traceability through batch control. User and endoscope identification via barcode scanner. - Data output via printer, data logger, or computer interface. Easy integration into existing IT systems Number of endoscopes: For 2 endoscopes or 4 ENTs Hygienic design: Hygienic workflow, single-door Channel connection system: Single-channel connection or patented pressure chamber system possible Single-channel monitoring system (CMS): No Chemistry Glutaraldehyde / Peracetic Acid: Both possible: DH version (with boiler, for glutaraldehyde) or DC (filter solution, for glutaraldehyde or peracetic acid) Documentation and integration: Yes, interface for printer/data logger as standard. Printer as standard. Optional scanner/IT interface Thermal reprocessing of instruments at 90°C: Available with additional equipment Electrical installation: 3-phase 400 V / 50 Hz AC+N+PE. Connected load: 11 kW. Fuse rating: 3 x 20 A Bsdpfx Aoin Edwelbjwt Year of manufacture: January 19, 2013 Item condition: used Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items - new and used - in our shop! International shipping costs on request!

Year of construction: 2023, condition: ready for operation (used), A Kohnle conveyor belt oven is available. Heating length: 1000mm, max. operating temperature: 1120°C, cooling length: 1850mm, throughput speed: 100mm-1000mm/min, channel height: 40mm, conveyor belt width: 110mm, machine dimensions X/Y/Z: approx. 5000mm/650mm/1350mm, control: Simatic HMI. Including ammonia splitter, data logger, nitrogen curtain at the front and rear and an additional pot conveyor. Documentation available. On-site inspection is possible. Expected to be available from March 2025. Bodpfxsvuafke Albjwt

Condition: used, This listing is for the Adam Solent Precision Analytical Balance + Adam ATP Printer The unit is in full working condition and is ready for immediate use The Adam PW124 analytical balance is a reliable, precision instrument tailored for tasks requiring high accuracy—such as chemical analysis, formulation, and quality assurance. It combines ease of use, robust features like internal calibration and GLP-compliant data outputs, and sturdy construction that supports dependable performance in demanding laboratory environments. Key Features Bedpfx Asxhfgvolbswt Exceptional Precision: Readability of 0.0001 g, repeatability around 0.0002 g, and linearity approximately 0.0002 g Backlit LCD Display: Easily readable under varying lighting conditions, with programmable backlight settings Calibration: Equipped with internal calibration, eliminating the need for external weights Connectivity: Includes an RS‑232 port for interfacing with PCs, printers, or data-loggers; supports GLP-compliant printouts with date and time Capacity Tracker: Visual indicator to help prevent overloading the balance Additional Functions: Offers selectable digital filtering for stability in changing environments, multiple weighing units, and standard lab weighing modes (e.g., check-weighing, parts-counting, percentage weighing, net/total) Security and Durability: Features password protection, a security slot for locks, sealed keypad, and robust metal housing—suitable for long-term lab use GLP Compliance: Capable of generating reports that include crucial data such as time, date, and calibration verification

Condition: used, This listing is for the ATi Portsens111 Gas Leak Detector The unit is in full working condition and is ready for immediate use The ATI PortaSens III is a portable, handheld gas leak detector designed for locating and measuring gas leaks across a wide range of environments—from chemical plants to pharmaceutical labs, food processing facilities, and confined spaces Key Features & Capabilities Interchangeable Smart Sensors Attaches a variety of pre‑calibrated smart sensor modules, each combining sensor, amplifier, and memory into one. These allow detection of 30 to over 60 different gases, depending on configuration Swapping sensors takes under a minute and requires no user calibration Built-in Sampling Pump & Flexible Wand Enables pinpoint detection of leak sources via one‑hand operation Color Touch-Screen Display Features a backlit, graphic or touch-enabled LCD for easy reading in all lighting conditions Data Logging & Connectivity Bwedpfxexhfqbs Albet Includes a 4 GB internal data-logger, capturing millions of data points. Log intervals are programmable from 1 to 60 minutes, with USB connectivity for data transfer Power Options Runs on either rechargeable NiMH “D” cell battery or traditional alkaline D-cell batteries Alarms & Alerts Offers both visual and audible alarms—including low flow and low battery warnings—plus multiple gas concentration thresholds Supported Gases The D16 PortaSens III can detect a broad spectrum of gases, including but not limited to: Toxic gases: Hydrogen sulfide (H₂S), hydrogen peroxide (H₂O₂), formaldehyde, chlorine, sulfur dioxide, ammonia, and others Common industrial gases: Oxygen (O₂), ozone (O₃), carbon monoxide, carbon dioxide Specialty/exotic gases: Arsine (AsH₃), diborane, ethylene oxide, phosphine, silane, bromine, iodine, and more

Condition: ready for operation (used), Year of construction: 2004, operating hours: 11,298 h, functionality: fully functional, machine/vehicle number: 665001, travel distance X-axis: 700 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 2,000 kg, spindle speed (max.): 42,000 rpm, number of slots in tool magazine: 40, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the period of September 21st to October 1st! TECHNICAL DETAILS Travel in X-axis: 700 mm Travel in Y-axis: 550 mm Travel in Z-axis: 450 mm Feed Axes Max. travel speed X, Y, and Z axes: 30 m/min Max. acceleration X, Y, and Z axes: 15 m/s² Positional accuracy TP according to DIN ISO 230-2: 0.005 mm Repeatability: 0.002 mm Work Table Table length: 850 mm Table width: 700 mm Number of T-slots: 5 T-slot dimensions: 18 H12 Table load: 2,000 kg Max. workpiece weight: 2,000 kg Distance spindle center – table: 550 mm Bjdpfozqupxex Albswt Spindle Spindle mount: HSK-E 40 Spindle speed: 3,000 - 42,000 rpm Spindle power: 17 kW Tool Changer Tool magazine positions: 40 MACHINE DETAILS Machine type: CNC HSC machining center CNC control: Andronic Electrical Connection Data Supply voltage: 400 V Supply frequency: 50 Hz Fuse rating: 32 A (?) Dimensions and Weight Overall length: 3,300 mm Overall width: 2,300 mm Overall height: 2,300 mm Overall weight: 7,700 kg Operating Data Machine operating time: 275 d 5 h 13 min 39 s Spindle operating time: 11,297 h 20 min 11 s EQUIPMENT - Full enclosure - Dust and fluid-proof guides - Oil mist extraction - Compressor cooler - Frequency inverter - Heidenhain glass scales in X, Y, and Z axes - Work light in the interior - Technical documentation - Workbench - HSK-E-40 tool holders - Tools - Workbench dimensions: approx. 1,500 × 900 × 1,100 mm External Reference: Demo - Lot 2

Condition: as good as new (ex-display), Year of construction: 2025, Binder VDL 115 (2025) laboratory vacuum chamber, in perfect condition, demonstration unit Model: Binder VDL 115 Year of manufacture: 2025 Condition: like new – demonstration unit, after factory tests Capacity: 115 liters Power supply: 230 V Availability: in stock VAT invoice: yes Location: Grabina 92-701 Poland Optional: transport --- BINDER VDL 115 – laboratory vacuum dryer for flammable solvents BINDER VDL 115 is an advanced laboratory vacuum dryer designed for the safe drying of materials containing flammable organic solvents. Thanks to its design compliant with the ATEX 2014/34/EU directive, the device ensures the highest level of safety and precision during laboratory and industrial processes. The VDL 115 model offers fast and gentle drying with optimal heat transfer through aluminum heating shelves. An intuitive controller with a touchscreen enables convenient monitoring of temperature and pressure, and an automatic drying program ensures controlled process execution and automatic venting of the chamber after completion. Key features: * Chamber capacity: 119 l * Temperature range: from +9°C above ambient temperature to +110°C * ATEX explosion-proof certification EX II 2/3/- G IIB T3 Gb/Gc/- X * Intuitive controller with a color touchscreen * Graphical display of temperature and pressure * Built-in data logger with USB export * Software monitoring of the drying process with automatic chamber venting * 2 aluminum heating shelves (expandable to 6) * Connection for inert gas or air * DN16 port for mounting sensors and measuring cables * Large viewing window with safety glass * Ethernet interface for communication with a computer Technical data: * Capacity: 119 l * Maximum temperature: 110°C * Maximum shelf load: 20 kg * Maximum total load: 70 kg * Rated power: 1.6 kW * External dimensions (W × H × D): 743 × 942 × 581 mm * Weight: 158 kg Applications: * chemical and pharmaceutical laboratories, * electronics industry, * research and development (R&D) laboratories, * quality control, Bwjdpovq I Tnefx Albst * drying of samples containing organic solvents, * processes requiring safe operation under vacuum conditions. BINDER VDL 115 is a professional, premium-class vacuum dryer, combining high performance, precise control, and compliance with ATEX safety requirements, making it ideal for the most demanding laboratory and industrial applications.

Condition: used, Year of construction: 2025, OVERVIEW This Hermis TP-HRW 20 stainless steel tunnel pasteurizer is a new and unused machine, manufactured in 2025, designed for the pasteurization of beer in 500 ml bottles. The pasteurizer has a capacity of approx. 20,000 bottles per hour and is configured as a 10-zone tunnel pasteurizer with heating, pasteurization and cooling sections. The machine is fully made of stainless steel AISI 304 and is equipped with an external plate heat exchanger for the heating system. The process is controlled by a Siemens S7-1200 PLC with a Siemens Simatic 12" HMI touch panel, allowing automatic control of the pasteurization process. The system is designed for a product inlet temperature of approx. +4°C, a pasteurization temperature of approx. +62°C to +64°C, and an outlet temperature of approx. +34°C to +35°C. The pasteurizer provides a total treatment area of approx. 74 m², with a treatment length of approx. 13.5 m and a total machine length of approx. 15.3 m. The complete process cycle is approx. 45 minutes, achieving approx. 24 PU based on the given 500 ml beer bottle configuration. TECHNICAL DATA - Manufacturer: Hermis - Model: TP-HRW 20 - Machine Type: Stainless steel tunnel pasteurizer - Condition: New, never used - Year of Manufacture: 2025 - Product: Beer - Container Format: 500 ml bottles - Capacity: approx. 20,000 bottles/hour - Treatment Area: approx. 74 m² - Number of Modules: 7 pcs - Total Number of Zones: 10 zones - Zone Configuration: heating, pasteurization and cooling zones - Treatment Length: approx. 13,500 mm - Dimensions: approx. 15,300 x 5,900 x 2,200 mm - Total Length incl. infeed / discharge conveyor: approx. 15,000 mm - Main Construction: Stainless steel AISI 304 - Heating System: Plate heat exchanger outside the pasteurizer - Steam Pressure: approx. 3 bar - Pasteurization Temperature: approx. +62°C to +64°C - Product Inlet Temperature: approx. +4°C - Product Outlet Temperature: approx. +34°C to +35°C - Pasteurization Time: approx. 10–11 minutes - Total Cycle Time: approx. 45 minutes - Pasteurization Units: approx. 24 PU - Water Consumption: approx. 2.2 – 3.0 m³/h during stable operation - Water Volume in Pasteurizer: approx. 6,600 l - Steam Consumption: approx. 790 kg/h during stable operation; approx. 1,250 kg / 30 min during start-up - Steam Temperature: approx. +143°C at 4 bar - Power Supply: 400 V AC, 3/N/PE, 50 Hz - Control System: Siemens S7-1200 - HMI: Siemens Simatic 12" touch panel - Main Conveyor: Plastic conveyor by Movex - Active Transfer: Rexnord - Plate Heat Exchanger: Funke - Pumps: Stainless steel pumps by Lowara - Spray Nozzles: Lechler - Steam Valve: Bürkert - Air Supply System: SMC - Level Sensors: Endress+Hauser / Negele - Temperature Registration: Endress+Hauser - Temperature Sensors: Negele Bwjdpoy Ul Dwjfx Albet - Included Features: Automatic pasteurization control, ECO graph / data logger, stainless steel electrical cabinet, air conditioner for electrical cabinet

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Weinig Dimter Profipress C 2800 P - 6 m gluing press Manufacturer: Weinig Dimter Model: Profipress C 2800 P - 6 m Bwedpeyvgiasfx Albet Year of manufacture: 2009 Condition: Very good Machine description: For sale: Weinig Dimter Profipress C 2800 P - 6 m wood gluing press, year 2009, designed for the production of glued wooden panels and elements made of soft timber. The machine was developed for efficient production using PVAC glue in D2 / D3 class and allows processing of material within specified width, thickness and input length ranges. According to the documentation, this model can process timber with widths from 30 to 80 mm, thicknesses from 15 to 40 mm and input lengths from 2100 to 2800 mm. The machine allows the production of panels with variable widths from 600 to 1200 mm. For short lengths, the collecting distance range is 700 to 1400 mm. The output is up to 10 to 15 infeeds per minute, depending on the entrance width. The Profipress C 2800 P - 6 m is intended for processing soft timber. The permitted bending tolerance is maximum 5 mm per meter. The documentation also specifies recommended operating conditions, including room temperature from 15 to 30 degrees Celsius and air humidity in the range of 40 to 65 percent. Technical data: - Model: Profipress C 2800 P - 6 m - Year of manufacture: 2009 - Performance: max. 10–15 infeeds/min, depending on entrance width - Timber width: 30–80 mm - Timber thickness: 15–40 mm - Timber entrance length: 2100–2800 mm - Collecting distance for short lengths: 700–1400 mm - Panel width: 600–1200 mm - Timber type: soft timber - Permitted bending: max. 5 mm/m - Glue type: PVAC D2 / D3 - Recommended room temperature: 15–30°C - Recommended air humidity: 40–65% Features and advantages: - Press designed for glued panel production - Machine from the renowned Weinig Dimter brand - Output up to 10–15 infeeds per minute - Possibility to produce panels with variable width - Suitable for processing soft timber - Works with common PVAC D2 / D3 glue - Industrial application for woodworking and production plants

Year of construction: 2025, condition: like new (used), Binder MKF 720 E5 Climate Chamber, year 2025. Brand new, unused chamber with 3-year warranty on spare parts. The Binder MKF 720 E5 is a professional climate/environmental chamber designed for stability studies, temperature, and climate testing in compliance with DIN and IEC standards. The E5 series is part of Binder’s latest generation, featuring a touchscreen interface and advanced program control. Key features: * Temperature range: -40°C to +180°C * Humidity range: 10–98% RH * Chamber volume: approx. 734 liters * APT.line™ preheating chamber technology * Ultra-fast temperature changes * Humidity control via capacitive sensor + steam humidification * Binder E5 touchscreen controller with segment and time programming * Integrated data logger + data export via USB * Ethernet interface * Heated inspection window with LED lighting Bsdsy Sg Nvjpfx Albowt * Automatic water supply and drainage management * Stainless steel interior chamber * Compressor cooling * Refrigerant: R-452A

Year of construction: 2026, condition: like new (used), Binder KB PRO 130, model year 2026, ex-demo unit in new condition. 2-year warranty on spare parts. Product description: PRODUCT DESCRIPTION A versatile workhorse among thermostat chambers: KB PRO is our most efficient incubator with cooling. A temperature range from -20°C to +100°C and extensive programming functions enable a wide range of applications that go far beyond incubation. KEY FEATURES Temperature range: -20°C to 100°C Proven APT.line™ preheating chamber technology Energy-efficient cooling thanks to a modern inverter refrigeration unit Cooling using the environmentally friendly refrigerant R-290 Door heating to prevent condensation Adjustable fan speed Robust housing construction with HIT sandwich technology Inner chamber made of stainless steel Bjdpfxjy Urc Ho Albjwt Inner door made of safety glass coated with metal oxide Two wire shelves made of stainless steel Access port Ø 30 mm with silicone stopper Stackable design Intuitive controller with touchscreen, time segment programming, and real-time programming Internal data logger, measurement values in open format can be read via USB Independent temperature protection class 3.3 (DIN 12880) with optical and acoustic alarm Device self-test for comprehensive status analysis Data exchange interfaces: Ethernet, USB BINDER Multi Management Software APT-COM™ Basic Edition Optional CO₂ gas modules for plant cultivation (0-1%) and cell culture (0-20%)

Condition: ready for operation (used), Year of construction: 2016, operating hours: 152 h, functionality: fully functional, machine/vehicle number: 665182, travel distance X-axis: 650 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 42,000 rpm, number of slots in tool magazine: 40, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel distances Travel distance X-axis: 650 mm Travel distance Y-axis: 550 mm Travel distance Z-axis: 500 mm Feed rates Feed rate X-axis: 30 m/min Feed rate Y-axis: 30 m/min Feed rate Z-axis: 30 m/min Spindle Bwjdpozquqcofx Albet Spindle interface: HSK-E 40 Spindle speed: 42,000 rpm Spindle running time: 151 h 20 min 08 s Spindle replacement: 2025 Cost of spindle replacement: approx. EUR 40,000 Tool magazine Number of tool slots: 40 Pallet system Pallet dimensions: approx. 320 × 320 mm Pallet clamping: Rotary table MACHINE DETAILS Machine type: CNC machining center Manufacturer: OPS INGERSOLL Model: SPEED HAWK 650 Year of construction: 2016 Electrical connection data Mains voltage: 400 V Mains frequency: 50 Hz Control voltage: 24 V DC Maximum fuse rating: 63 A Connected power: 38 kVA Dimensions and weight Overall height: 2,850 mm Overall length: 3,300 mm Overall width: 2,400 mm Machine weight: 9,000 kg EQUIPMENT Technical documentation Manual HSK-E 40 tool holders 3 pallets

Condition: used, maximum load weight: 22,000 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 12/2014, loading space length: 13,300 mm, total width: 2,555 mm, total height: 4,000 mm, Equipment: ABS, Pezzaioli Cattle-Cruiser 3.Stock Livestock Transporter with Type 2 for Cattle and Calves * Separate 24V hydraulic unit * Hydraulic loading ramp * 3 levels each in the low-bed and neck area * 2x lift-up roof * Radio system * Drinking system with 525-liter water tank ----* Partition gates * Feed flaps * Ventilation flaps * Spare wheel holder * Storage compartments ----* 19 electric fans * Temperature sensors on each deck * TranScan data logger * Navigation system with modem and GPS * WABCO EBS, ABS, LSV ----Neck loading area: * 1st Floor: 8.80 m² * 2nd Floor: 8.20 m² * 3rd Floor: 8.10 m² Low-bed loading area: * 1st Floor: 20.0 m² * 2nd Floor: 22.80 m² * 3rd Floor: 22.50 m² ----* Tire size: 385/55R22.5 * Technical total weight: 39000 kg * Unladen weight: 13000 kg * Overall length: 14000 mm * MOT/technical inspection: expired ----Vehicle number 6851-----Errors and prior sale excepted-----Advertisements and various lettering have been digitally removed. We will be happy to assist you with all the formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional fee: * Trade-in of your old vehicle * MOT/technical inspection * Complete export handling * Arranging financing * Applying for export license plates * Vehicle transport * Vehicle registration Bwedpjkb Tcajfx Albet YOUR VTS TEAM

Condition: not inspected (used), Year of construction: 2018, machine/vehicle number: 58/18/0016, Bandsaw machine WAGNER (TRENNJAEGER) TEBA 300 A-NC Delivery terms: Ex works, loaded onto truck Location: 74906 Bad Rappenau Collection: Collection of the machine is scheduled for October 7, 2026. The exact collection time will be agreed upon in advance. Payment terms: Prepayment – by bank transfer Technical data: Saw blade speed: 15 – 90 m/min Saw blade size: 3,110 x 27 x 0.9 mm Saw blade inclination: 3° operating height Clamping jaw: 850 mm Hydraulic oil: approx. 26 liters Coolant tank: approx. 35 liters Cutting ranges at 90°: Round: Ø 300 mm Square: 285 mm Rectangle: 205 x 290 mm Cutting ranges at 45°: Round: Ø 240 mm Bwedpfxozx Sx Hj Albet Square: 220 mm Rectangle: 235 x 130 mm Scope of supply: Existing manuals as shown in the pictures Roller guides as shown in the pictures Protective cover as shown in the pictures Dimensions & weights: Installation dimensions L x W x H approx.: 2790 x 1500 x 1700 mm Weight approx.: 1100 kg If you have any questions or would like to arrange a viewing, please do not hesitate to contact us! Additional notes: ►If desired, we can offer transport to the destination. ►The quoted price is net, plus VAT. ►The goods are sold with the exclusion of any warranty. ►Technical data subject to change without notice. ►Subject to prior sale. ❗The goods are sold exclusively to business customers❗