Used Weinig Rondamat 980 for sale (1,170)

Condition: excellent (used), TOOL SHARPENING MACHINE FOR FULLY-AUTOMATIC SHARPENING OF STRAIGHT KNIVES TECHNICAL DATA MAX. TOOL WIDTH: 330 MM EXTENDED (OPTIONAL): 460 MM WITH POWERLOCK: 322 MM TOOL RADIUS: 100 - 300 MM EXTENDED (OPTIONAL): 140 - 340 MM WITH POWERLOCK: 100 - 250 MM SANDING DISC DIAMETER: 125 - 200 MM SPINDLE RPM: 4600 RPM FREQUENCY CONTROLLED: 1500 - 4600 U/MIN Njdpfx Alsy Ivbaonscu

Condition: excellent (used), Year of construction: 1996, grinding length: 240 mm, total width: 240 mm, Weinig Rondamat 925 Year of manufacture: 1996 Maximum tool width: 240 mm Ncsdpfxozbz U Do Alneu Grinding wheel diameter: 150-225 mm Grinding wheel bore: 40 Tool diameter: 100-230 mm

Condition: as good as new (ex-display), Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!! CAN SHARPEN MAX 406MM DIAMETER CUTTERS !!! The G-716 Semi-automatic Cutterhead Grinder is used to sharpen 178mm to 406mm diameter eased edge, milled to pattern, and fingerjoint cutterheads. Worktable traversing is automatic and has adjustable stops. Cutterhead indexing is manual. Each knife is held against a positive stop while being ground !!! No Index Plate To Change No index plate to change when working with heads with different numbers of knives. The use of an index plate assumes that the knives and head separations are uniform throughout, which is often not the case. If the height of the knife is high or low, then the front face of the knife will vary from knife to knife making the task of grinding difficult. The one constant is the back face of the knife, therefore the use of an indexing stop against the back face will provide for accurate indexing regardless of the irregularities in the knives and head slots. Head Indexing and Wheel Feed: Manual Minimum / Maximum Diameter Cutterhead: 7″ Min./16″Max. 178mm Min./ 406mm Max. Worktable Feed: Air / Oil Travel (maximum): 12″ 305mm. Adjustable Limits: Proximity Switch Speed: Fully Adjustable Index Method: Manual index after each knife is ground. Grinding Spindle: 1-1/2 HP Wash Down Duty TEFC Motor 3600 RPM, Dual ABEC 7 Precision Bearings, with Sealed Lubrication. 8″ (203mm)Diameter Grinding Wheel (9″ 229mm Diameter Max.) Coolant System: 15 Gallon Tank with Casters, Sediment Tray Full View Sight Glass, 5 GPM Pump (120VAC) Wash Down Hose Included Specifications Grinds 7″ to 16″ diameter eased edge, milled to pattern, and finger joint heads Automatic traversing worktable with adjustable travel limits Manual indexing of knives against a positive stop with grinding position pneumatic brake allowing precision indexing without the need of an index plate High precision 1-1/2 HP grinding spindle with sealed lubrication Recirculating adjustable flow flooded coolant system with wash down hose Fully enclosed grinding chamber with viewing windows and task light Njdpfxeq Dzi Te Alnscu Grinding wheel feed allows unattended operation. New Proscale.

Condition: used, Stehle HK 630 (semi-automatic straight knife grinder). Specification: • Maximum tool width 630 mm !!! • Tool diameter planer heads (min-max knife heads) 120 - 340 mm • Grinding wheel spindle speed 2850 rpm • Grinding wheel drive 1,1 kW • Clearance angle 10 - 35° • Coolant tank 28 L • Motor coolant pump 0,28 kW • Connection values, total 2 kW Nsdpfx Aljv T Rkhsnocu Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!!

Condition: used, consisting of: decorative film + aluminum support plate + printed circuit board. new decorative film (manufactured in 2019), control panel 23 001 0078, identification no. 10017781 / 912053002, Njdpfxjlkch So Alnecu used original printed circuit board, cleaned and tested, used original aluminum support plate, cables available upon request.

Condition: used, grinding wheel diameter max. 225 mm diameter of tools max. 300 mm tool diameter min. 80 mm Weinig Rondamat 929 knife grinding machine for manufacturing profile knives. Production from a straight blank or regrinding of used knives using a template. Ncedpjlf H Tgefx Alneu Max. tool width: 230 mm Includes new coolant pump.

Condition: good (used), Year of construction: 2001, For inquiries: Zoltán Utasi Plus 36 30 205 7380 Grinding of planer knives (conventional and hydro tools, as well as profile knives – profile knives ground based on templates) Machining length: 240 mm Tool diameter: 100–230 mm Grinding wheel diameter: 150–225 mm Grinding wheel width: 2–3–4–10 mm Relief angle: 15–35° Side angle: 0–10° Coolant tank: 50 L Total electrical power: 2 kW Spindle diameter: D40 and D50 mm Infinitely variable speed control for grinding wheel: 1000–3000 rpm Accuracy: within 0.005 mm Motorized lateral feed Ncjdpoy Nmuyefx Alnsu Liquid-cooled system Equipped with profile copying unit Accessories included (grease pump, knife holder, grinding wheel, dressing tool with tracing pin, template holder) This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.

Condition: ready for operation (used), functionality: fully functional, type of input current: three-phase, grinding width: 240 mm, Knife grinding machine WEINIG Rondamat 168 Max. tool diameter 3500mm Disk diameter 150mm Ncjdpfjufcnqex Alneu Tool length 240 mm Main cutting edges up to 25° Motor 1, 1 kW

Condition: new, Diameter: 150 mm Manufacturer No.: 920 072 005 Grit: D 126 900819 Grinding wheel for Weinig Rondamat or similar sharpening machines. Ncodpovl Hy Asfx Alnju

Condition: used, Year of construction: 2015, WEINIG - Rondamat 1000 CNC High-precision knife grinding machine - Automatic data import of CNC programs from the Moulder Master - Fully automatic sharpening and production of profile knives from a solid blank - Fully automatic re-sharpening of straight planer knives and profile knives in the cutterhead Grinding of planer knives in the cutterhead with standard knife projection is possible. Used machine Rondamat 1000 Year of manufacture: 2015 Grinding unit: Robust spindle carrier with precise guides for concentricity accuracy under 0.005 mm Motorized radial adjustment for various grinding wheel diameters Back relief angle fully automatically adjustable Lateral relief angle fully automatically adjustable Grinding spindle with HSK interface for fast, repeatable grinding wheel changes and high concentricity accuracy. In combination with the grinding wheel magazine, the wheel change can be carried out automatically. HSK 50 F Grinding wheel diameter min./max. 150/200 mm Grinding wheel width (Borazon, diamond) 2-3-4-10 mm Grinding wheel bore 60 mm Grinding spindle drive 1.5 kW Grinding spindle speed, frequency-controlled 1500-3000 rpm Relief angle grinding: - radial, on knife back 10°-30° - lateral depending on the profile contour 0-20° Nedpjyzaz Rofx Alnjcu Accessories: 3 grinding wheel holders for grinding wheel diameter 200 mm LED light for the machine interior Extras: Automatic grinding wheel measurement via optical measuring system for positioning the grinding wheel on the grinding support Measurable diameter min. - max. 145-200 mm Automatic tool changer for changing grinding wheels between profiling and finish grinding - 3 magazine slots Grinding wheel, Borazon, for profile knives in HSS and Stellite, wheel diameter 200 mm, B 151 - radius 2 mm Grinding wheel, Borazon, for profile knives in HSS and Stellite, wheel diameter 200 mm, No. 930062010, B 46 - radius 1 mm, finish grinding Grinding wheel, Borazon, for straight grinding in HSS and Stellite, wheel diameter 150 mm, No. 920072015, B 126 - width 10 mm, rough grinding 3 additional grinding wheel holders - HSK spindle for grinding wheel diameter 200 mm Coolant system: Top cooling via plastic articulated hose and from below via the knife support directly at the grinding point prevents overheating of knives even with high stock removal Dosing of coolant flow via a central distributor with stainless steel ball valves Automatic coolant cleaning through a conveyor filter system Soiled filter paper is automatically removed Coolant tank approx. 70 l Coolant additive 5 l Coolant pump motor 210 watts Tool holder: System "PowerLock" 360 For grinding PowerLock tools and large-bore tools - Max. tool weight 80 kg - Tool holder with manual HSK quick-clamping system - Spindle can be switched for right and left tools - Max. tool width 360 mm - Max. tool cutting circle 300 mm - Min. tool cutting circle 90 mm - incl. PowerLock adapter for mounting conventional tools, shank diameter 40 mm Additional HSK clamping unit Additional part fixture Automatic processing of two tools in one operation.

Condition: used, Year of construction: 2004, total height: 1,600 mm, total length: 1,250 mm, total width: 1,400 mm, Colour: Grey Empty weight: 900 kg Price: On request - Details: - └ Description: Bad bearings - Year: 2004 - Documentation available: No - CE certificate present: No Ncjdsyr Rnzjpfx Alneu - Serial number: 102850 - Motor power: 1.0kW - Transport dimensions: 1250mm x 1400mm x 1600mm (l x w x h) - Transport weight [kg]: 900kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2006, total height: 1,600 mm, total length: 1,300 mm, total width: 1,500 mm, Colour: Grey Empty weight: 900 kg Price: On request - Year: 2006 - Documentation available: No - CE certificate present: No - Serial number: 108088 - Motor power: 1.0kW Nodpfeytbc Sex Alnjcu - Transport dimensions: 1300mm x 1500mm x 1600mm (l x w x h) - Transport weight [kg]: 900kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), WEINIG Rondamat 909, S/N 93362, Year 2001 – Ref. No. 119131 WEINIG Rondamat R 909, Machine for the automatic sharpening of straight knives in planing heads • Automatic indexing • Planer head diameter min. 85 mm to max. 225 mm • Max. tool length 330 mm (table stroke 440 mm) • Unlimited number of cutting edges Nodpewvql Njfx Alnocu • Continuously adjustable clearance angle 15° – 35° • Grinding spindle speed n=4,000 rpm • Grinding wheel D=125 mm, bore d=20 mm • Grinding motor 1.1 kW, n=2,850 rpm • Feeding motor 0.053 kW, n=1,300 rpm • Grinding feed rate 650 mm/min • Indexing motor 0.033 kW, n=1.00 rpm • Freely selectable grinding passes per tool 1 – 5 • Coolant pump motor 0.065 kW, n=2,900 rpm • Coolant / tank capacity approx. 115 liters • Mounting arbor D=50 x 330 mm • Machine complete with accessories Machine dimensions • Width 1,150 mm • Depth 820 mm • Height 1,200 mm • Weight 450 kg Condition: 100% function tested = AS NEW condition Price: On request Payment: Prior to handover/loading Inspection: At any time by prior arrangement Subject to error and prior sale

Condition: excellent (used), functionality: fully functional, Head Grinder Rondamat 925 + Weinig CAM 970 1. Rondamat 925 Grinding wheel diameter: 150-225 mm Grinding wheel width: - ceramic: 5 mm - borazon: 10 mm Grinding wheel bore: 60 mm Tool diameter: 100-230 mm Tool width up to 240 mm Nsdsxyynxjpfx Alnscu 2. CAM 970 Tool measuring system

Condition: excellent (used), Year of construction: 2004, Weinig Rondamat 960 Powerlock (Automatic straight knife grinder and profile grinder) Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!! Specification as follows Weinig Rondamat 960 Powerlock / HSK profile grinder. High pecision knife grinder for sharpening straight knives and profiling using a template. Sharpening straight knives in the cutter block. Manual grinding machine for profile and straight grinding. Grinding wheel diameter min./max.: 150 mm / 225 mm Grinding wheel width: Ceramic 5 mm, Borazone 10 mm Grinding wheel bore: 60 mm Njdpfew Np Uuex Alnjcu Tooling circle min./max.: 100 mm / 300 mm Tool width max.: 240 mm Grinding wheel drive: 1,1 kW Spindle rpm: 1700 / 2000 / 2400 / 3000 U/min Free angle: Radial: (at the back) 10 - 30 degrees, Axial: 0 - 20 degrees For swivel heads up to 60 degrees Coolant tank approx. 50 litres Table feed 0 - 240 mm Electrical connection approx. 2 kW Pneumatic connection value 5 bar Operating voltage 380 V / 50 Hz Full documentation. POWER LOCK SYSTEM option For grinding powerlock tools. Tool holder with manual HSK quick clamping system. Radial table clamping with fine adjustment Max tool width 240mm Max COMFORT PACKAGE option Variable grinding wheel speed 1500 to 3000rpm Lamp Back clearance angle is motorised Grinding wheel advance is motorised Setting of the side clearance angle is pneumatic Hydraulic grinding wheel clamping. Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!!

Condition: excellent (used), Rondamat R 934, year 1997, in very good condition. Ncsdpfjxiv S Ejx Alnju

Condition: good (used), Weinig Rondamat R960 Year of manufacture: 2002 Ncsdewzu N Aopfx Alnsu

Condition: used, Sharpening machine for profile cutters and straight grinders. . Grinding interlocked in 2 axes. Very easy to operate. Width of the tool max: 360mm Maximum cutting circle 350mm profile 300mm straight Minimum cutting circle 70mm Main motor power kW: 1.5 at 3000 rpm at 50 Hz. Nsdpfx Aonzkx Selnocu Wet grinding: Yes

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Weinig Dimter Profipress C 2800 P - 6 m gluing press Manufacturer: Weinig Dimter Model: Profipress C 2800 P - 6 m Year of manufacture: 2009 Condition: Very good Machine description: For sale: Weinig Dimter Profipress C 2800 P - 6 m wood gluing press, year 2009, designed for the production of glued wooden panels and elements made of soft timber. The machine was developed for efficient production using PVAC glue in D2 / D3 class and allows processing of material within specified width, thickness and input length ranges. Njdpsyvgiajfx Alnscu According to the documentation, this model can process timber with widths from 30 to 80 mm, thicknesses from 15 to 40 mm and input lengths from 2100 to 2800 mm. The machine allows the production of panels with variable widths from 600 to 1200 mm. For short lengths, the collecting distance range is 700 to 1400 mm. The output is up to 10 to 15 infeeds per minute, depending on the entrance width. The Profipress C 2800 P - 6 m is intended for processing soft timber. The permitted bending tolerance is maximum 5 mm per meter. The documentation also specifies recommended operating conditions, including room temperature from 15 to 30 degrees Celsius and air humidity in the range of 40 to 65 percent. Technical data: - Model: Profipress C 2800 P - 6 m - Year of manufacture: 2009 - Performance: max. 10–15 infeeds/min, depending on entrance width - Timber width: 30–80 mm - Timber thickness: 15–40 mm - Timber entrance length: 2100–2800 mm - Collecting distance for short lengths: 700–1400 mm - Panel width: 600–1200 mm - Timber type: soft timber - Permitted bending: max. 5 mm/m - Glue type: PVAC D2 / D3 - Recommended room temperature: 15–30°C - Recommended air humidity: 40–65% Features and advantages: - Press designed for glued panel production - Machine from the renowned Weinig Dimter brand - Output up to 10–15 infeeds per minute - Possibility to produce panels with variable width - Suitable for processing soft timber - Works with common PVAC D2 / D3 glue - Industrial application for woodworking and production plants

Condition: not inspected (used), Tenoning spindle 1 St. Number of milling agregates 5 St. Spindle diameter 50 mm Control Weinig PC-Nexus Weinig Unicontrol 11 Window System with Extensive Tooling ----- Optionally available (at additional cost): - Weinig Univar 6 Rebating Machine (Price upon request!) - Götzinger PowerDrill Drilling and Milling Center for Windows and Doors (Price upon request) Manufacturer's Technical Description: ----- Item 1: Weinig Unicontrol 11 Window System ----- Includes existing tooling sets: - IV 67 (Wood and Wood-Aluminum) - IV 77 (Wood and Wood-Aluminum) - IV 90 (Wood) Cross-cut Saw ----- With laser alignment light; motor power: 3 kW; spindle diameter: 40 mm; electronically variable spindle speed with brake: 3,000–6,000 rpm. Max. tool cutting circle: 400 mm Axial adjustment: 150 mm via NC axis Radial adjustment: pneumatic, to 8 positions for top edge rounding Horizontal Bottom Rounding Unit ----- Motor with brake: 1.5 kW; Spindle diameter: 20 mm; Clamping length: 25 mm Spindle speed: 9,000 rpm Max. tool cutting circle: 130 mm Axial adjustment travel: mechanically coupled with cut-off saw Radial adjustment travel: pneumatically controlled Tenoning and Slotting Spindle ----- With hydraulically clamped outboard bearing Motor power with brake: 15 kW Spindle diameter: 50 mm Spindle speed: 2,800 rpm Max. tool cutting circle: 400 mm Tool clamping length: 640 mm Axial adjustment travel: NC axis Home position below table: 5–10 mm Radial adjustment travel: fixed 1st Profiling Spindle (Climb and Conventional Milling) ----- Motor power with brake: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Min. tool cutting circle: 140 mm; Max. tool cutting circle: 232 mm Tool clamping length: 400 mm (with outboard bearing) Axial adjustment travel: 350 mm (NC axis) Radial adjustment travel: NC axis Home position below table: 5–10 mm 2 feed rollers opposite the spindle; axial adjustment pneumatically controlled (8 positions) Horizontal Top Profiling Unit ----- Motor power with brake: 3.7 kW Spindle diameter: 40 mm Clamping length: 40 mm Spindle speed: 9,000 rpm Max. tool cutting circle: 130 mm Adjustment: pneumatic, to 8 positions (axial and...) radial 2. Profile Spindle ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool cutting circle: min. 140 mm, max. 232 mm Tool clamping length: 400 mm (with outboard bearing) Axial adjustment travel: 350 mm (NC axis) Radial adjustment travel: NC axis Home position (below table): 5–10 mm Indexed guide fence with muntin support strip 2 feed rollers (opposite the spindle); axially pneumatically controlled (8 positions) Vertical Profile Milling Unit (Right-hand side, at machine end) ----- Motor power (with brake): 3.7 kW Spindle diameter: 40 mm Clamping length: 160 mm Spindle speed: 5,850 rpm Tool cutting circle: min. 112 mm, max. 210 mm Nsdpfxsy T R Tus Alnocu Adjustment: Pneumatic (8 positions—axial a...

Condition: used, Year of construction: 2005, Weinig Unimat 500 Moulding machine Description; Dimensions of the infeed table: 2500 mm Number of axes: 5 Spindle Sequence: Bottom-right-left-top-bottom Mobile spindle: No Planing width: 20 / 230 mm Planing height: 12 / 120 mm Throughput: 24m/min Groove bed: No Other comments:- (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Njdpfxow Ebaco Alnscu Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, Year of construction: 2005, Weinig Unimat 500 Moulding machine Description; Dimensions of the infeed table: 2500 mm Number of axes: 5 Spindle Sequence: Bottom-right-left-top-bottom Mobile spindle: No Planing width: 20 / 230 mm Planing height: 12 / 120 mm Throughput: 5 - 24m/min Groove bed: No Other comments:- Nsdjzg H Ekjpfx Alnjcu (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, Year of construction: 1995, workpiece width (max.): 230 mm, input voltage: 400 V, table length: 1,500 mm, number of spindles: 8, Equipment: cabin, Weinig Unimat 23e Moulding machine (8 spindles) Description; Year of construction 1995 Dimensions of the infeed table: 1500 mm Number of axes: 8 Spindle Sequence: Bottom-right-left-right-top-bottom-top-bottom Mobile spindle: No Planing width: 20 / 230 mm Planing height: 12 / 120 mm Throughput: 6-24m/min Groove bed: No Nodpsyx Tiijfx Alnecu (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: good (used), Year of construction: 2010, Weinig Conturex C124-R CNC Window production machine (in right side infeed composition) Also available C124-L (Right-side infeed) year 2019 Description; Year of construction: 2010 Working width 40 - 260 mm Working height 25 - 150 mm Ratio of wood height to width max. 2:1 Powergrip clamping table Table support length 2x 2280 mm Workpiece length without follow-up cycle 220 - 2700 mm Workpiece length with follow-up cycle 2700 - 4500 mm Workpiece length with multiple follow-up cycle 4500 - 6000 mm Full description on request Available approx. summer 2026 (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen vorbehalten! Keine Garantie auf gedruckte Daten!. Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland Ncodpjzg A A Ejfx Alnou

Condition: used, Year of construction: 2013, Number of boring spindles 7 St. Working width 230 mm Ncedpfjzgxfcex Alnju Working height 160 mm Length of the planing table 1.000 mm Feed motor 7 kW Feed speed 36 m/min. Control PowerCom Plus Tables Marathon Coating Driven table rollers 3 Axial CNC Spindle 4+5 Radial CNC Spindle 3+4+5+6 Weinig Powermat 1200 automatic planing and profiling machine for planing and profiling solid wood in a single pass. This high-performance machine with seven spindles enables precise machining of all four sides of the workpiece as well as complex profiling at high feed rates. Ideal for demanding applications in the window, door, molding, and structural lumber industries. Spindle 1: Bottom / 15 kW / 50 mm / 8,000 rpm Spindle 2: Right / 15 kW / 50 mm / 8,000 rpm Spindle 3: Left / 15 kW / 50 mm / 8,000 rpm Spindle 4: Right / 15 kW / PowerLock / 8,000 rpm Spindle 5: Left / 15 kW / PowerLock / 8,000 rpm Spindle 6: Top / 18.5 kW / PowerLock / 8,000 rpm Spindle 7: Bottom / 22 kW / PowerLock / 8,000 rpm