Used Teka Filtercube 4H Hv 11Kw for sale (1,372)

Condition: used, Stationäre Absaugung mit Filteranlage / Stationary Extraction Eystem with Filtration Unit TEKA Filtercube 4H HV 11kW Stationäre Absaugung mit Filteranlage / Stationary Extraction Eystem with Filtration Unit TEKA Filtercube 4H HV 11kW TEKA-Dosiereinrichtung für Precoat, Filterpatronen gegen Verkleben schützen /  TEKA Precoat Dosing Unit: Protecting Filter Cartridges Against Clogging Baujahr / Year 2018 - Serial-No. 9501442110402 Filtersteuerung mit automatische Filterabreinigung / Filter Control with Automatic Filter Cleaning Motorleistung 11 kW / Motor power 11 kW Leistungsstarker Ventilator mit Steuerung / High-Performance Fan with Controls Ledjzav Ebopfx Aamshl Ausführung SelfClean / SelfClean Version Ausstattung / Equipment: Standard Filterpatronen, Filterfläche je nach Luftleistung / 4 standard filter cartridges; filter area varies depending on airflow capacity Display gesteuerte Filterabreinigung / Display-controlled filter cleaning Ventilatorsteuerung / Fan Control Bogenschalldämpfer für Luftaustritt nach oben / Elbow Silencer for Upward Air Discharge Rauche und Stäube werden mit einer Filterleistung von über 99 % sicher abgeschieden / Smoke and dust are safely separated with a filtration efficiency of over 99% Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Year of construction: 2019, condition: good (used), Dust extraction,welding fume extractor,cartridge filter self-cleaning,pneumatic,vacuum for plasma,laser,sandblasting,sodding,blasting and all kinds of dry dust. Brand: TEKA / Bystronic Model: Filtercube 4H / FilterBys Version 2 Year of manufacture: 2019 Lodpfsnyhvqex Aamjhl Filter cleaned by microprocessor controller with compressed air pulses during operation thus high efficiency of the device. Low compressed air demand thanks to the system "Power-Spray" The Filtercube central filter unit equipped with cartridge filters is the ideal solution for almost all problems in the area of smoke and dust filtration. Fan on the clean side which reduces the risk of explosion to a minimum. Application: central extraction system for multiple welding stations extraction system for welding robots extraction system for thermal cutting and grinding tables system for general hall filtering (push-pull system, displacement system) extraction system in combination with an extraction table extraction system for grinding of non-exploitable materials Parameters: 5.5 Kw fan Capacity 3800 m3/h Vacuum pressure 3250 Pa Inlet diameter : 250 mm Filtration area of 100 m2 Equipped with "DUST-VAC" unit , which automatically pumps the dust into a separate tank. Possibility to order new filter cartridges tailored to the customer's needs Technical documentation included.

Condition: excellent (used), For sale: Professional automatic Vickers hardness tester Mitutoyo HV-100, made in Japan, in excellent technical and visual condition. The device is equipped with the AUTOVICK automatic measurement system and the Mitutoyo Vision Unit, enabling fast, repeatable and fully automatic hardness measurements without operator subjectivity. Intended for measurement laboratories, quality control departments, manufacturing plants, automotive, aerospace, and toolmaking sectors. —— Key information • Measurement method: Vickers (HV) • Model: HV-100 (series HV-100B / HV-100C / 100D) • Load range: up to 100 kgf • Automatic AUTOVICK system Lhsdpfx Ajyc H I Sjamol • Integrated Mitutoyo Vision Unit • Automatic impression recognition and HV calculation • Made in Japan • Power supply: 230 V • Stable, heavy-duty laboratory construction —— Technical condition • Device operational and complete • Very good visual condition • Regularly used in an industrial environment • Last technical inspection: 2020 • Ready for immediate operation after connection —— Included in the set • Mitutoyo HV-100 hardness tester • Vision Unit (measuring camera) • AUTOVICK automatic system • Set of weights • Original accessories and holders • Transport cases with equipment • Original Mitutoyo documentation and manuals • Weight: 65 kg

Condition: excellent (used), filter area: 50 m², suction capacity: 650 m³/h, negative pressure: 38,000 Pa, High-pressure fume extractor, dust extractor, TEKA self-cleaning filter. Filter for plasma, laser. Due to its design, the system is particularly recommended for processing greasy, sticky fumes and dust. The device is equipped with an automatic system for impregnating cartridge filters and an activated carbon filter for neutralizing odors generated during processing. The filter is cleaned pneumatically with impulses of compressed air during operation, which results in high efficiency of the device. The extraction is designed for special applications where the filtered fumes and dusts may be soggy and sticky. By feeding the impregnant, moisture is captured from the smoke, which helps protect the filters from sticking. In this case, the life of the patron filters is extended. After the cleaning process, the control gives a pulse to the magnetic valve, located on the top cover of the powder-filled barrel. The applied magnetic pulse swirls the impregnant, which enters the suction pipeline. The powder covers the working surface and provides a protective coating for the filters. Unit like new - worked only 126 hours !!! Turbine with a power of 7.5 Kw. in a sound-absorbing housing with a silencer Capacity 650 m3/h at a vacuum of up to 38 000 Pa !!! Ljdpfxorhidme Aamehl Filtration area of 50m2 Inlet diameter : 100 mm Complete with , pneumatic gate valve , silencer and partial piping.

Condition: good (used), Spark trap, spark pre-separator for ventilation ducts, chip extraction, dust extraction, extraction system, ventilation ducts and fittings Lhedpfx Aaez A T D Nemel -Spark trap: with copper lamellae -Connection: Ø 320 mm -Dimensions: 480/440/H470 mm -Weight: 38 kg

Condition: good (used), Spark trap, spark pre-separator for ventilation ducts, chip extraction, dust extraction, extraction system, ventilation ducts and fittings -Spark trap: with copper lamellae -Connection: Ø 320/250 mm -Dimensions: 760/440/H470 mm Ledpfx Aaez A Th Iemjhl -Weight: 40 kg

Condition: good (used), Spark trap, spark pre-separator for ventilation ducts, chip extraction, dust extraction, extraction system, ventilation ducts and fittings -Spark trap: with copper lamellae -Connection: Ø 400 mm Lhjdsz A Thnopfx Aamol -Dimensions: 680/510/H540 mm -Weight: 48 kg

Condition: good (used), Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system Cartridge dust extraction system -Manufacturer: TEKA, filter system for extraction system including control unit with frequency converter Lhsdpfx Aaozukp Asmel -Type: ZPF9 -Cartridge filter: see photos -Inlet/Outlet: Ø640 mm / Ø640 mm -Extraction capacity: up to 20,000 m³/h -Note: A filter unit only, without a suction fan, can be supplied for an additional charge (ID38772) -Dimensions: 1840/1475/H2670 mm -Weight: 689 kg

Condition: good (used), Year of construction: 2016, functionality: fully functional, Includes 1 arm. Ledez Dv Dnepfx Aamehl

Condition: new, 1860 m³/h Pressung 2.900 Pa 1,1 kW filter surface area 10 m² 72 dB(A) 400/50 V/Hz 665 x 1100 x 1495 mm 200 kg - Hose arm 3 m, joints inside Lhedpfx Aehp S Trsamjl - Filter cartridge: dust class M - Pre-filter: baffle plate - Current type: 3Ph+N+PE The filter system ----- The mobile filter system of the Cartmaster IFA type is thanks to the automatic Cleaning particularly suitable for welding work with unalloyed and alloyed steels, galvanized material and aluminum with heavy smoke development. It corresponds to the safety requirements for devices Welding fume class "W3" (high-alloy steels with alloy components > 30% Nickel-based alloy).If used as intended, the system can be used for the Recirculation mode used because the requirements for the Exceptions according to TRGS 560 are fulfilled. That special developed, dirt-dependent cleaning system ensures a good cleaning behavior of the filter cartridge, so that an optimal suction performance is guaranteed throughout the operation. The cleaned particles fall into a dust collection drawer from which they can then be disposed of. The powerful spiral fan ensures even with saturated Filter cartridges for a high volume flow. The filter media ----- A baffle serves as a pre-separator for coarse particles. The filter cartridge installed below (dust class M, degree of separation > 99%) filters the finest smoke and dust particles. The cartridge is factory coated which increases the service life. The extraction arm ----- The extraction arm can be moved with the 3 internal joints Position spring support slightly and is in the set position cantilevered. A throttle flap integrated in the extraction hood enables the Flow rate setting.

Condition: new, 1860 m³/h Pressung 2.900 Pa 1,1 kW filter surface area 10 m² 72 dB(A) 400/50 V/Hz 665 x 820 x 1365 mm 165 kg mobile extraction, welding fume extraction (manual cleaning by loss of pressure) - Hose arm 3 m, joints inside - Filter cartridge: dust class M - Particle pre-separator: baffle plate - Current type: 3Ph+N+PE The filter system ----- The mobile filter system of the type StrongMaster IFA is particularly suitable for Welding work with unalloyed and alloyed steels, galvanized material and Aluminum in case of heavy smoke development. She corresponds to the Ljdpfx Aokm Rynsamshl Safety requirements for devices in the welding fume class "W3" (high-alloy steels with alloy components > 30% nickel-based alloy). When used as intended, the system can be used for be used in the recirculation mode, since the requirements for the Exceptions according to TRGS 560 are fulfilled. The filter will via a maintenance door using a compressed air gun from the clean air side cleaned. The cleaned particles fall into a dust collection drawer from the they can then be disposed of. The powerful scroll fan ensures a high volume flow even with saturated filter cartridges. The filter media ----- A baffle serves as a pre-separator for coarse particles. The filter cartridge installed below (dust class M, degree of separation > 99%) filters the finest smoke and dust particles. The cartridge is factory coated which increases the service life. The extraction arm ----- The extraction arm can be moved with the 3 internal joints Position spring support slightly and is in the set position cantilevered. A throttle flap integrated in the extraction hood enables the Flow rate setting.

Condition: used, functionality: fully functional, Used Teka fume extraction unit for wall mounting. Can also be placed on the floor, as a stand is included (custom-built by the previous owner). A new control unit has been installed. Lsdpfxezzwhxj Aamehl Connection options: 2x D150. The extraction unit runs smoothly; a new silencer is included.

Condition: excellent (used), Year of construction: 2013, radial fan, dust extraction blower, fan, extraction, dust blower -Manufacturer: TEKA, radial fan in soundproof container -Motor: 22 kW -Speed: 1460 rpm -Volume flow rate: 20,000 m³/h -Pressure: 3,000 Pa -Fan wheel: Ø 720 mm -Inlet connection: Ø 500 mm -Outlet connection: Ø 500 mm Lhjdpfszunw Rjx Aamol -Dimensions: 2150/1770/H2300 mm -Weight: 1051 kg

Condition: used, mileage: 34,200 km, power: 100 kW (135.96 HP), first registration: 10/2021, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 6,109 mm, total width: 2,010 mm, total height: 2,940 mm, loading space volume: 13 m³, loading space length: 3,540 mm, loading space width: 174 mm, loading space height: 210 mm, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), tail-lift, Iveco Daily 35C14 V MY22, 3520mm wheelbase, L, extra high box van with a 750kg tail lift - large platform. Please feel free to call us to discuss the right body configuration for your needs. Are you looking for a different model, engine, dimensions, or other features? Please contact us. We offer financing and leasing at attractive rates – also for the Netherlands, Austria, and start-up companies! ----Vehicle: IVECO Daily 35C14V 3520mm L Extra High * 136 hp (100 kW) Euro 6d diesel * 6-speed manual transmission * Rear-wheel drive * 3,520 mm wheelbase * Long wheelbase / long rear overhang * H3 extra-high roof * Weight variant 1,900 / 2,600 kg * Trailer load up to 3,500 kg * 90-liter fuel tank * 20-liter AdBlue tank * Rear axle ratio i = 3.917 * Reinforced rear axle suspension * Trapezoidal spring rear axle * Aluminum radiator * Heated fuel filter * 220 A (3,080 W) generator * 12 V / 105 Ah battery * Steel rims * 195/75 R16C tires Interior: Comfortable driver's seat * Co-driver's bench seat with 3-point belt * Comfortable dashboard * Comfortable display * Comfortable noise insulation * Insulated rear wall of the cab * Overhead storage compartment above the cab * Central storage compartment Lhodpfx Aoza Nrhoamel * USB charging port * Adjustable steering column (2 positions) * Grab handle on the A-pillar * Fabric seat covers * Standard headrests * Plastic steering wheel * Electric windows * Tinted windows Comfort: Air conditioning with automatic climate control * Cruise control * HI-Connect radio with navigation * Central locking with remote control * Additional remote key with remote control * Electrically adjustable and heated exterior mirrors Safety & Assistance: ESP * ABS * Driver airbag * Co-driver airbag * Speed limiter 160 km/h * Additional speed limiter * Seatbelt warning system for driver & co-driver * Daytime running lights * First aid kit * Warning triangle * Spare tire Cargo area & body: Wooden floor in the cargo area * Partition to the cargo area * Sliding door on the right * Rear double doors with 260° opening angle * LED lighting in the cargo area (2 lights) * Mud flaps on the rear axle Other: White (IC 194) * Service indicator * Start-stop system * Fuel filler cap on the B-pillar * Side vehicle lettering "Daily" * Dhollandia tail lift * 750 kg load capacity * Spiral cable remote control * 2,000 mm platform Additional extras for the body are available for an additional charge. ----Note: Please call us before your visit? We will ensure that your desired vehicle is on site. If it is not located in Wachtendonk, we will gladly deliver it from our stock. Individual configuration upon request is possible. Your vehicle partner since 1996. Call or email us now – we look forward to hearing from you! No liability for printing and typographical errors. Errors and prior sale are reserved. Best regards, Pimenta Automobile

Condition: used, Year of construction: 2021, functionality: fully functional, intake vacuum (max.): 32 mbar, suction capacity: 3,500 m³/h, actuation type: electric, Dust extraction unit, dust collector, wet separator for aluminum and explosive dusts, manufactured by the renowned brand TEKA. Lhedpfx Aszq A Ezeamel Model: WNA AL 3500 Designed for cleaning dust with special properties, particularly explosive dusts. High-performance wet dust collector, operates on the principle of centrifugal separation. The advantage of this unit is its simple and reliable operating principle. The unit does not have pumps or nozzles that could interfere with its operation. Air is cleaned by swirling the dust with water. Dust particles in the air stream are captured and bound by water molecules. The separated dust settles as sludge in the bottom tank and can be removed from there. The fan is designed for continuous operation and is standard equipment on the unit. Unit parameters: Capacity - 3500 m3/h Vacuum - 3200 Pa Fan with a power of 4 kW Year of manufacture: 2021

Condition: used, functionality: fully functional, type of input current: three-phase, filter area: 20 m², suction capacity: 3,500 m³/h, negative pressure: 3,000 Pa, Mobile welding fume extractor, dust extraction unit, self-cleaning pneumatic vacuum filter TEKA. Model: TK-PF Mobile filtration and ventilation unit. Suitable for welding, grinding, and all types of dry dust. The filter is cleaned pneumatically by compressed air pulses during operation, ensuring high efficiency. Fan power: 1.1 kW – three-phase Max. capacity – 3500 m3/h Max. negative pressure – 3000 Pa 2 extraction arms, each 4.00 m long. Stock no. – 1106 Lhedpfey Hq Rtex Aamsl

Condition: good (used), Year of construction: 2002, machine/vehicle number: 121630011, Offer 24386 Technical data: - Mobile cartridge filter unit with articulated extraction arms - suitable for welding mist extraction when welding - steel + stainless steel + aluminium + unalloyed or galvanized steels - Welding fume class W3 - Control with digital display - Separation efficiency 99 % - Air volume flow approx. 3000 m³/h - Max. static pressure 2500 pa - Filter area 20 qm² - Automatic filter cleaning - Articulated extraction arm 360° 4000 mm - Arm diameter 160 mm - Drive - fan 400 V / 1.10 kW - Space requirement approx. W 700 x H min. 2150 x D 1100 mm - Weight approx. 150 kg - Operating hours ( read ) 980 h Lhsdpfx Aeu Aafdeamjl

Condition: ready for operation (used), Specifications: Supply voltage | V | 230 Frequency | Hz | 50 Run Hours: 2690 hours Type of current | Ph | 1. Engine power | kW | 2.4 Air flow volume max. | m³/h | 640 Negative pressure max. | Pa | 15000 Protection class | | IP54 ISO class | | F Extraction performance | % | >99 Width | mm | 365 Depth | mm | 768 Height | mm | 801 Weight | kg | 70 Sound pressure level | dB(A) | 70 Allowed ambient temperature | °C | +5 to +35 (during operations) | | -10 to +40 (during transport and storage) Max. temperature of polluted air at the capture point | °C | +50 Allowed max. humidity | % | 70 Good working condition. Lhodpfxoxvpumo Aamsl Please check out our other listings as well.

Year of construction: 2000, condition: good (used), Stock number: 2739 Manufacturer: TEKA Year of manufacture: 2000 Type: PP-DC Number: 201320 Volume flow: 320 m³/h Max. Negative pressure: 22.000 Pa Connection diameter: 50 mm Lhsdpfx Aasmf Uzxemol Equipment: mobile, portable Accessories: hose 3.000 mm Connection: 1.2 kW 230 V Weight: approx. 40 kg Dimensions: 300 x 300 x 850 mm without hose

Condition: good (used), Year of construction: 2010, Dust extraction, filter ventilation, welding fume extraction, self-cleaning cartridge filter, pneumatic, vacuum TEKA AIRTECH P18. The main areas of application for these systems are industrial plants/welding shops where it is not possible to implement point extraction or where point extraction is insufficient to maintain air quality in the workshop. Side-mounted ducts with a pollution capture point draw in contaminated air and direct it to the filter section. Here, pollutants in the form of fine particles accumulate on the surface of the cartridge filter. Compressed air pulses clean the cartridge filters automatically at required intervals. After the compressed air hits, the particles collected on the filter surface detach and fall into the dust collection tank. The cleaned air returns to the work area through individually adjustable long-range nozzles. At the same time, the discharge of the cleaned air directs the contaminated air in the workshop towards the extraction ducts. The filter is cleaned by a microprocessor controller with compressed air pulses during operation, which results in high device efficiency. Low compressed air consumption thanks to the "Power-Spray" system. The AIRTECH series of devices is certified by IFA in accordance with EN ISO 15012-1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a permanent, local welding fume extraction unit. Parameters: Capacity - 18,000 m3/h Motor power - 11 kW Vacuum - 2250 Pa Filtration area - 324 m2 (9 filter cartridges, each 36 m2) Fan in a sound-absorbing housing Control cabinet with electrical documentation Noise level - 72 dB Year of manufacture - 2010 Dimensions: Height - 5.00 m Base width - 1.44 m x 1.44 m Width with outlet ducts - 8.5 m Total weight approximately 2400 kg Ledpfx Aoib Dadjamshl

Condition: used, mileage: 273,000 km, power: 272 kW (369.82 HP), first registration: 10/2015, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: red, gearing type: automatic, emission class: euro6, Year of construction: 2015, Equipment: ABS, air conditioning, electronic stability program (ESP), Manufacturer Scania Model P370 6x2-4 Hvidtved Larsen FlexLine 310 Year 2015 Condition Very good Serial Number YS2P6X20005395210 Ref. nr. 178151 Reg. date: 30-10-2015 Last seen: 13.11.2025 Engine: DC13 116/370 hp Hk: 370 Km: 273000 Gearbox: Opticruise GRS895 Eurotype: 6 Diesel tank: 1 Tank liter: 300 L Rear view camera: ? Ledpjzhfcqefx Aamshl Air conditioning: ? Cabin type: CP16L Radio: ? Disc brake: ? ABS: ? Engine brake: ? Tire Size: 385/65R22,5 - 315/80R22,5 - 385/65R22,5 Cover% left 50% Front suspension: Air Suspension rear: Air Wheelbase: 4500 mm Toolbox: ? Total weight: 26000 Kg Net weight: 17025 Kg Load capacity 8975 kg Manufacturer: Hvidtved Larsen FlexLine 310 Tank capacity: 10000 liter with stamp High pressure pump: Uraca KD 718G High pressure capacity: 333 L/min at 170 bar High pressure pump hours: 1474 Vacuum pump: CVS Vacustar W1300 Vacuum capacity: 21.667 l/min with variable hydraulics. Vacuum pump timer: 3250 Remote control: ? Water heater: ?

Condition: used, mileage: 275,000 km, power: 265 kW (360.30 HP), first registration: 12/2014, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: mechanical, emission class: euro6, Year of construction: 2014, Equipment: ABS, air conditioning, Manufacturer Scania Model P360 6x4 Hvidtved Larsen Flexline 312 Euro 6 Year 2014 Condition Very good Serial Number YS2P6X40002102182 Ref. nr. 598073 Reg. date: Hk: 360 Km: 275000 Gearbox: Manual GRS905 Eurotype: 6 Diesel tank: 1 Tank liter: 300 Cabin heater: ? Cabin type: CP16L Radio: ? Drum brake: ? ABS: ? Engine brake: ? Tire Size: 385/65 - 315/80 - 315/80 Cover% left 40 - 100 - 80% Lhjdpfx Aaoyra A Uemol Front suspension: Springs Suspension rear: Springs Wheelbase: 4500 mm. Toolbox: ? Hydraulic system: ? Total weight: 26000 kg. Manufacturer: Hvidtved Larsen FlexLine 312 Tank capacity: 12.000 l. High pressure pump: Uraca KD 718G High pressure capacity: 390 l/min 140 bar High pressure pump hours: 1057 Vacuum pump: CVS Vacustar W1600 Vacuum capacity: 26,667 l/min. Vacuum pump timer: 1659 h. Water heater: ?

Condition: new, For sale: professional electric motor from the renowned German manufacturer Bauknecht Antriebstechnik. The motor is brand new – ex-stock. It has never been used in operation and may have only minor storage marks visible in the photos. Lhjdoyv R Tgepfx Aamsl Robust, industrial-grade construction – ideal for demanding applications. 🔧 Technical specifications: Manufacturer: Bauknecht Antriebstechnik Model: 3~Mot 160M Power: 11 kW Speed: 2930 rpm Voltage: 380 V Current: 22 A Frequency: 50 Hz Protection class: IP54 Insulation class: B Duty type: S1 (continuous) Cos φ: 0.88 Design: IMB5 (flange-mounted)

Condition: excellent (used), For sale: Industrial electric motor by renowned manufacturer KSB Aktiengesellschaft. The motor is in good technical condition and fully operational. It features a robust construction and is designed for demanding industrial applications. Technical specifications: Manufacturer: KSB Type: 1LA7163-4AA66-ZX77 Power: 11 kW Supply: 3~ 400/690 V Frequency: 50 / 60 Hz Speed: 1460 rpm (50 Hz) Protection class: IP55 Insulation class: F Mounting: IM B35 (flange + feet) Cos φ: approx. 0.84 Lhsdpeyvi Hfofx Aamel Weight: approx. 85 kg Condition: Used Fully functional Normal signs of use (visible in the photos) Good condition

Condition: excellent (used), For sale: Professional industrial extraction unit by TEKA, model STRONGMASTER BIA, designed for welding fume extraction and air pollution control. ‼️ VERY LOW HOURS – ONLY 1,550 OPERATING HOURS (this is rare for this type of equipment) ⚙️ Technical specifications: Manufacturer: TEKA (Germany) Model: STRONGMASTER BIA Capacity: 3,000 m³/h Max. negative pressure: 2,500 Pa Motor power: 1.1 kW Power supply: 400V (3PH + N + PE) Frequency: 50 Hz Rated current: 2.5 A Protection class: IP54 Control voltage: 24V Weight: approx. 130 kg Lhsdpfeyz Dilox Aamjl 🔧 Equipment: Flexible extraction arm Industrial filter Control panel Operating hours counter Mobile chassis with wheels 🔍 Condition: Used equipment, in good technical condition. Normal signs of use visible. ✅ Low hours – only 1,550h ➡️ Equipment is only lightly used ➡️ Significant potential for further operation