Used Surface Grinding Machine 650 X 525 X 350 Mm for sale (112,800)

Condition: good (used), Year of construction: 2001, grinding length: 650 mm, grinding width: 525 mm, total height: 350 mm, table length: 600 mm, table width: 350 mm, Manufacturer: Geibel & Hotz Type: FS 635-Z SA Control: Digital read out Year of construction: 2001 Magnetic table 600 x 350 mm Closed housing for CE Automatic vertical lubrication SA Automatic lubrication Coolant tank Specifications Metric US Standard X - axis 650 mm Y - axis 525 mm Z - axis 350 mm Table length 600 mm Table width 350 mm Table load 400 Feed X - axis 35000 mm/min. Feed Z-axis 1000 mm/min. Grinding stone dimensions 300 x 50 x 76.2 mm Power output 3.7 kW Speed 2800 ? rpm Gsdovdal Ajpfx Abmjuc Dimensions (estimate) length 3200 mm width 2000 mm height 2870 mm weight 2300 kg Please note: The information on this page has been obtained from the manufacturer to the best of our knowledge and belief, and where possible, the information is given in good faith but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: used, Surface grinding machine ELB type SW 3 HA Juwel Machine no. No. 51810465 Year of construction 1965 Sanding area 300 x 150 mm Clamping surface 300 x 150 mm Electromagnet 300 x 150 mm Distance spindle center - magnet approx. 350 mm Grinding wheel diameter 175 mm Grinding wheel width max. 25 mm Grinding wheel speed 2800 rpm Grinding spindle drive 0.75 kW Mains connection 380 Volt, 50 Hz. - Manual and automatic table cross adjustment (0.02 mm per graduation mark) - Manual cross adjustment via handwheel, travel per handwheel rotation, Y-axis 2 mm - Manual depth adjustment via handwheel, travel per handwheel rotation, Z-axis 0.2 mm - Longitudinal table movement via electric motor with 2 speeds - Grinding wheel extractor - Electromagnet type SD 15/30 Height = 78 mm - Lubrication pump for the table guide in the machine base - Wet grinding unit with pump opposite - Electric box Electromagnet for wall mounting - Operating instructions - Machine light Space requirement L x W x H 1250 x 1100 x 1950 mm Gujdpfx Abettc T Dsmsc Weight approx. 920 kg good condition

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, grinding length: 1,500 mm, grinding width: 300 mm, Disc grinding machine with magnetic clamping plate 1500mm x 300mm. Coolant system included. Truck loading with crane or forklift possible and free of charge. Gedjzcmzfopfx Abmjuc

Condition: good (used), Year of construction: 1998, Manufacturer: Henninger Type: ZS-201 Year of manufacture: 1998 Self centerring device Double column slide ways Dressing Unit Tailstock by rack & pinion Eccentric adjustment 0 - 20 mm Large Cone-Stone tooling package Specifications Metric US Standard Minimum workpiece Ø 20 Ø Min. Maximum workpiece Ø 450 Ø Max. Max. product length 1200 mm Speed 18300 Rpm Max. grinding angle 45 - 120 ° Max. workpiece weight Gujdpovt Tuiefx Abmoc 190 Dimensions (estimate) Length 1250 mm Width 1250 mm Height 1900 mm Weight 365 kg Please note: The information on this page has been compiled to the best of our knowledge and belief by us and, where possible, by the manufacturer. The information is provided in good faith but accuracy cannot be guaranteed. Accordingly, it will not constitute a representation and terms of contract. We recommend that you review all important details.

Condition: good (used), Manufacturer: STANKO Type: 7D430 Year of manufacture: 1994 Table rotation 360° Head tilting possible up to 10° Big cabinet with slotting key way tools Gjdewpud Aopfx Abmouc Lubrication Completely overhauled in 1994 Specifications Metric US Standard Table diameter Ø 630 mm Table load 1000 Ram displacement 320 mm X - Axis 650 mm Y - Axis 510 mm Outreach 500 mm Number of strokes 3 - 38 m/min min. Power 12 kW Dimensions (estimated) Length 3000 mm Width 2200 mm Height 3000 mm Weight 6150 kg Please note: The information on this page was provided to the best of our knowledge and ability by us, and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representation and contractual terms. We recommend that you verify all important details.

Condition: used, Year of construction: 2011, Tube Grinding Machine – Custom-Built - Tube grinding machine with CE marking - Suitable for grinding or surface pre-treatment of various pipes - Used for galvanized steel pipes as surface pre-treatment before painting - Can be modified for other materials (requires different abrasive belts and possibly adjustments to the feed system) - Control system: Mitsubishi - Automatic infeed and outfeed from the machine - Multiple pipes can be loaded, processed sequentially, and temporarily stored after processing - Pipes are picked up by grippers and guided through the machine to the outfeed - Includes Felder RL125 extraction system for grinding dust removal - Requires compressed air for operation - Machine is sold without safety equipment - Year of manufacture: 2011 Gsdpfex E T Swox Abmeuc Technical data - Min. pipe diameter: 76 mm - Max. pipe diameter: 200 mm - Min. pipe length: 3,600 mm - Max. pipe length: 10,000 mm - Connected load (grinding machine): 6.75 kW - Connected load (extraction): 3 kW - Footprint (without extraction unit): 2,500 x 20,500 mm

Condition: good (used), The scope of delivery includes: 01x shelf connector, used Type of fastening: laterally to the shelf upright surface: sendz. galvanized Gsdpsi Euzdefx Abmjuc total length: 450 mm for shelf distance: approx. 350 mm profile dim.: U 62 x 30 mm Weight: 0,84 kg | pcs.

Condition: good (used), Technical data of the CS Sigma profile: Manufacturer: Stow Type: MSNSBG 350/2.0 S 350 GD Included in delivery: 01x CS Sigma profile, used material color: sendz. galvanized total length: approx. 5.500 mm Gjdpfxoidchce Abmeuc CS Sigma profile: approx. 350 x 85 x 25 x 12 mm material thickness: approx. 2,00 mm

Condition: good (used), Technical data of the CS Sigma profile: Manufacturer: Stow Type: MSNSBG 350/2.0 S 350 GD Included in delivery: 01x CS Sigma profile, used material color: sendz. galvanized total length: approx. 5.600 mm CS Sigma profile: approx. 350 x 85 x 25 x 12 mm material thickness: approx. 2,00 mm Gedjidchgjpfx Abmjuc

Condition: good (used), Technical data of the CS Sigma profile: Manufacturer: Stow Guedpfx Aeidcg Aobmec Type: MSNSBG 350/2.0 S 350 GD Included in delivery: 01x CS Sigma profile, used material color: sendz. galvanized total length: approx. 4.450 mm CS Sigma profile: approx. 350 x 85 x 25 x 12 mm material thickness: approx. 2,00 mm

Condition: good (used), Year of construction: 2002, Make: PLEIGER Gusdpfx Abjkvnc Semec Type: HF 75 / 115 S 30 Control: Siemens Simatic panel Year: 2002 Stroke speed slide step 1 : 4 - 20 M/Min Stroke speed slide step 2 :0,3 - 3 M/Min Rotation chuck step 1 : 300 Rpm and 320 Nm Rotation chuck step 2: 100 Rpm and 1290 Nm Horizontal deep hole honing machine Horizontal tube honing machine Horizontal cylinder honing machine Horizontal pipe honing machine Fine finishing of cylindrical bores Specifications Metric US Standard Drilling depth 11500 mm Power on spindle 55 kW Speeds / ranges 300 Rpm Dimensions (Estimate) Length 25000 mm Width 2000 mm Height 2000 mm Weight 30000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1982, 1 used surface and guideway grinding machine Gedpfxeynglbj Abmsuc Manufacturer: ELB Model: SWDE 30 U CNC Year of manufacture: 1982 / 1999 Control type: CNC Control: Mitsubishi 520 Location: NRW Country of origin: Germany Delivery time: short notice Delivery terms: ex stock TECHNICAL DATA Grinding length: 3000 mm Grinding width: 900 mm Workpiece height: 600 mm Electromagnetic chuck: 3000 x 900 mm Pole pitch: 18 mm Grinding wheel dimensions: Ø 500 x 100 mm Control: Mitsubishi 520 Total power requirement: 18.5 / 5.5 kW Machine weight approx. 19 t Space requirement approx. 9 x 4.5 x 3.5 m Shipping dimensions approx. 13 x 2.5 x 3.5 m

Condition: used, Year of construction: 2002, Technical details: grinding length: 1500 mm grinding width: 700 mm workpiece height: 580 mm table load capacity: 2380 kp table speed -stepless-: 5 - 35 m/min Gjdpfxeq Sbh Us Abmeuc grinding wheel dia. x width: 500 x 100 x 203 mm grinding wheel motor: 18 kW speeds:: stufenlos elektronisch total power requirement: 35 kW weight of the machine ca.: 12 t dimensions of the machine ca.: 5,3 x 2,9 x 3,8 (3,18) m surface grinding machine, paper-filter, DRO 3 axis, automatic infeed, dwheel, full cabin *

Condition: used, Year of construction: 2021, functionality: fully functional, grinding length: 6,000 mm, grinding width: 800 mm, total height: 800 mm, Technical specifications: • Application: Surface grinding and profile grinding • Grinding area: 6000 x 800 x 800 mm • Grinding wheel: 500 x 100 x 203.20 mm • Spindle power: 43 kW • Connected load: 89 kW • Operating hours: approx. 4,400 machine operating hours / approx. 1,600 spindle operating hours • Year of manufacture: 2021 The machine is currently fully functional and can be inspected at the supplier’s premises by appointment. Price is quoted ex works in Lower Saxony; the machine will be prepared/packaged for transport. The machine can be taken over immediately. Equipment: Gjdjzcyccopfx Abmeuc • CAM profile grinding software “WinWop” • Diamond roll dressing unit with 160 mm diamond wheel • Coolant recirculation system • Grinding mist extraction system • Automatic balancing • Spark detection system • Belt filter system with magnetic separator • VPN connection for remote diagnostics/remote maintenance

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan 76900 € 1453.41 € 1015 mm 610 mm 1.000 x 400 mm 400 x 1.000 mm 1050 mm 5 - 25 m/min 0 - 2.250 mm/min mm 450 mm 480 mm 0 - 675 mm/min 0.001 - 0.04 mm 500 - 1.800 1/min 3.75 kW 1.5 kW 1.1 kW 1.1 kW 4280 mm 2080 mm Guodpjwiqyasfx Abmjc 2100 mm 3500 kg 220 kg 440 kg 355 x 50 x 127 mm mm 10.4" graphic NC control on a swivel arm with touchscreen for: Operating mode selection Cycle selection and program creation Surface grinding Cross grinding Plunge grinding Dressing with automatic compensation Semi-automatic balancing in the machine Automatic spindle speed for constant surface speed Spindle load visualization Unbalance control Graphical status monitoring Alarm list aut. vertical feed servo drive for grinding wheel feed and table cross feed hardened slide ways in all 3 axes with needle rollers electro-magnetic chuck coolant equiptment with aut. paper filter and magnetic separator autom. dressing attachment table mounted with compensation * grinding wheel grinding wheel flange grinding wheel balancing scale balance arbor LED machine lamp machine and equipment according to the CE-regulations user manual in GERMAN and ENGLISH * The exact configuration of the dresser must be clarified before ordering

Condition: excellent (used), Year of construction: 1998, Grinding area: 600 x 500 mm Maximum grinding height: 523 mm Grinding wheel dimensions: max. 355 x 38 mm Bore: 127 mm Gedpfxszcp R Ne Abmjuc Speed: 1,500 rpm Maximum table load: 700 kg Machine weight: 3,500 kg Includes documentation. Includes various grinding wheels.

Condition: new, functionality: limited functionality, Year of construction: 2025, control type: manual, Equipment: CE marking, documentation/manual, OMEC 4-Roller Mechanical Symmetric Plate Rolling Machine with Double Pinch 1530×2.5 mm Brand new, CE certified. Made in Italy. Double pinch. Top and bottom rollers powered with equal torque. Side rollers motorized for upward/downward movement. Front-opening top roller. Special bearings for side rollers. External lever to control roller inclination. Sheet clamping with bearing-actuated device. Two-pedal foot control. Electrical panel compliant with CE standards. Millimeter indicator for sheet clamping position. Standard equipment included with the plate rolling machine: - Frontal conical device on top roller. - No. 2 digital displays for the side roller positions. - No. 1 digital display for the motorized sheet clamping. - Grinding/Turning of rollers after hardening treatment. - Roller hardening. - Side sheet loading table with sheet centering stops, marked in mm. Working length: 1530 mm. Top and bottom roller diameter: 90 mm. Side roller diameter: 95 mm. Plate thickness: 1.5 – 2 – 2.5 mm. (1.5 x D / 3 x D / 5 x D). Godpjy E Schsfx Abmjuc Roller hardness: 55/60 HRC, 2 mm case depth. Installed power: 1.8 kW. Dimensions: 2290 x 750 x h 1150 mm. Weight: 690 kg.

Condition: good (used), . dimensions of the table 5000x550 mm . maximum rectifiable length 5000 mm . maximum transversal stroke 600 mm . Z axis travel 600 mm . grinding wheel dimensions 420x127x100 mm . manual type head for inclined planes Gjdpfx Ajip Dxwebmjuc . tank with paper purifier . magnetic separator . magnetic plate with n° 3 units of 1.000x500 mm . length dimension 12000 mm . width dimension 2500 mm . height dimension 3500 mm . weight 15000 Kg . complete machine manuals .CE certificate

Condition: good (used), Year of construction: 1979, functionality: fully functional, machine/vehicle number: 1054, grinding length: 400 mm, grinding width: 150 mm, Table length: 400mm Guedpfx Absr Eq U Somoc Table width: 150mm Maximum cutting length: 400mm Maximum grinding width: 150mm Maximum workpiece weight: 75kg Distance spindle to table: 400mm Table speed 1-24 m./min. Sharpening stone diameter: 25mm Spindle speed: 900 – 4500 rpm. Year of construction: 1979

Condition: good (used), functionality: fully functional, For sale is a TSC NX300 tool precision grinding machine from 1985. The grinding machine is in good condition, considering its age. Technical data: Manufacturer / Model: TSC / NX300 (NX series) Serial number: 2523 Drive power: 6.37 kW (approximately 8.5 hp) Electrical connection: 380 V (three-phase) / 50 Hz / 3 phases Accessories: 2-axis digital display; continuously adjustable electromagnetic chuck Upon request, transport and loading can be arranged throughout Europe for an additional fee. Prices plus VAT. Inspection is possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange is possible! Machine purchase and sale BUYING / SELLING PRODUCTION & METALWORKING MACHINES, AMONG OTHERS. Do you need a high-quality, yet affordable, metalworking machine for your production? Or do you want to sell yours? Gujdpfx Abszb H S Usmjc For more information or contact options, please visit our website.

Condition: good (used), Year of construction: 2013, grinding length: 500 mm, grinding width: 200 mm, total height: 1,750 mm, total length: 2,150 mm, total width: 1,450 mm, feed length X-axis: 550 mm, grinding height: 350 mm, grinding spindle motor power: 1,500 W, For sale is a surface grinding machine from the manufacturer Okamoto, model ACC 52 SA. The surface grinding machine is in very good condition and can be put into operation immediately. Technical specifications: Manufacturer: Okamoto Machine Tool Model / Type: ACC 52 SA Year of manufacture: 2013 Max. grinding length: 500 mm Max. grinding width: 200 mm Distance from table surface to spindle center: approx. 422 mm Size of magnetic clamping plate: 500 x 200 mm Table speed (hydraulic): 0.3 – 25 m/min Grinding wheel dimensions: Ø 205 x 19 x Ø 50.8 mm Spindle speed: approx. 3,000 rpm Spindle motor: 1.5 kW Total machine weight: approx. 1,700 kg Transport and loading can be arranged throughout Europe, for an additional charge, upon request. Guodpfx Aszb E Hdsbmec Prices plus VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange possible! Machine buying and selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Do you need a high-quality, but affordable, metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit our website.

Condition: good (used), Year of construction: 1990, functionality: fully functional, grinding length: 1,200 mm, grinding width: 500 mm, total height: 2,540 mm, total length: 4,250 mm, total width: 2,270 mm, rapid traverse X-axis: 20 m/min, travel distance X-axis: 1,350 mm, grinding spindle speed: 1,500 rpm, power: 7.5 kW (10.20 HP), For sale is a PROTH PSGC-50120AHR surface grinding machine. The item is in good condition. Working area & travel distances: Max. travel (cross x longitudinal): 560 x 1350 mm Grinding area / table surface: 500 x 1200 mm Max. distance from spindle center to table surface: 700 mm Max. height from table surface to the bottom edge of the standard grinding wheel: 522 mm Axis movements & feeds: Longitudinal movement (X-axis): Table speed (hydraulic): 1 – 25 m/min Cross movement (Z-axis): Intermittent cross feed (electromechanical): 0.1 – 15 mm/feed Continuous cross feed (rapid traverse): 2000 mm/min (at 50 Hz) / 2400 mm/min (at 60 Hz) Handwheel feed per revolution: 5 mm (scale division: 0.02 mm) Vertical feed (Y-axis): Rapid traverse (optional/equipment): 200 mm/min Handwheel feed per revolution: 0.25 mm (scale division: 0.002 mm) Grinding spindle & grinding wheel • Grinding wheel dimensions: 355 x 50 x 127 mm Gsdpfx Abszb Er Hjmjuc • Spindle speed (50 Hz / 60 Hz): 1500 / 1800 rpm • Spindle motor: 7.5 kW (optional 11 kW) / 10 HP Transport dimensions & weights: Machine weight (net): approx. 6,100 kg Machine weight (gross/transport weight): approx. 7,500 kg Transport dimensions (L x W x H): 4.25 x 2.27 x 2.54 m Hydraulic motor: 3.7 kW / 5 HP

Condition: excellent (used), Year of construction: 1976, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 460 mm, Grinding length: 500 mm Grinding width: 250 mm Gjdpozdb Agjfx Abmeuc Height: 460 mm

Condition: good (used), Manufacturer: ELB Type: Perfekt BD15SPS Year of manufacture: 1994 Machine number: 450921194 Guodpfx Aszdanuebmjc Table: 2,000 x 600 mm Grinding length: 1,500 mm Grinding width: 600 mm Grinding height: 500 mm Grinding wheel dimensions: 400 x 100 x 127 mm Grinding wheel speeds: 4,000 rpm Accessories: without magnetic separator Condition / Defects: Control panel not original, Handwheel retrofitted separately 2 potentiometers retrofitted Machine weight: approx. 8 tons Machine dimensions: 5,000 x 2,300 x 2,300 mm Control cabinet dimensions: 1,400 x 500 x 2,300 mm

Condition: ready for operation (used), functionality: fully functional, grinding length: 600 mm, grinding width: 250 mm, space requirement height: 2,440 mm, space requirement length: 3,000 mm, space requirement width: 2,050 mm, The machine has undergone geometric revision and is fully functional. If required, further work can be carried out, such as a complete overhaul or repainting in your desired color. Guodpfx Aozc E Azjbmec