Used Suction And Filtering System for sale (46,284)

Condition: new, Year of construction: 2025, functionality: fully functional, Our powerful "MM 2010" sandblasting cabinet uses a pressure blasting process and, thanks to its innovative media recirculation system, is suitable for all types of blasting media. Thanks to the bucket elevator permanently connected to the cabinet, even the heaviest types of blasting media, such as stainless steel, cast steel, and other metallic media, can be used without any problems. Unlike competing systems, the blasting media is not sucked back into the cabinet, but rather transported to the adjacent bucket elevator via a flat conveyor system. The bucket elevator conveys the material upwards and throws it into the cyclone separator, where the blasting media is cleaned and returned to the blasting process. Our specially developed media recirculation recycling system ensures continuous media flow, regardless of the extraction system's suction power. Thanks to the media recirculation system and the innovative fan technology, the blasting cabinet has very low energy requirements (0.75 kW fan motor). Since the blasting material is not sucked back in, no oversized extraction system with high power consumption is required (as with many competitive systems). To achieve maximum blasting performance, the "MM 2010" pressure blasting cabinet is equipped with a 60-liter pressure blasting tank. This is equipped with a pressure regulator for continuously adjusting the blasting pressure from 0.1 to 12 bar. For safe operation, a water separator is permanently mounted on the blasting tank, protecting the blasting media from moisture. The pressure blasting nozzle is made of highly wear-resistant boron carbide and allows a service life of up to 1,000 hours, depending on the blasting media used. The blasting chamber is equipped with a wear-resistant rubber lining, which increases the service life of the blasting media and protects the blasting cabinet from wear. An air blow gun is installed for cleaning the blasted workpieces and blowing off the cabinet walls. The permanently installed cartridge filter extraction system ensures optimal visibility in the blast chamber and maximum abrasive service life. The extraction system features continuous cleaning of the filter cartridges using compressed air blasts. This ensures a long service life of the filter media and consistently consistent extraction performance. The blast chamber is loaded via an angled front flap that swings completely upwards. This allows the blast cabinet to be loaded using a forklift or crane. The sturdy work grate can support a maximum load of 500 kg. To ensure optimal visibility in the blast chamber, two powerful and energy-saving LED lights are mounted on the cabin roof. Their roof-mounted design protects them from dust and wear. The system is operated via a modern touchscreen display. To ensure safe operation of the blast cabinet, the blast cabinet is equipped with a door safety switch. The installed viewing windows are made of toughened safety glass and are provided with a wear-resistant film. Todpowc Nrnefx Amrsc

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: J22143, total length: 5,200 mm, total height: 2,391 mm, type of input current: AC, outer diameter of label roll: 400 mm, inside diameter of label roll: 75 mm, overall weight: 800 kg, input voltage: 380 V, Performance specifications: Product: Minimum height 40mm Maximum height 330mm Maximum diameter 150mm Minimum diameter 15mm Labels: Maximum outer roll diameter 400mm Inner roll diameter 75mm Maximum label width 150mm Application speed min 70 ppm Conveyor speed max (infinitely adjustable) 27.5 m/min min 7.5 m/min Dimensions Overall height 2391mm Length 5200mm Power supply Electrical 380V AC (three-phase) 50/60Hz, 4kVA Tsdpfxszv S Rwo Amroc Pneumatic 0.06 m3/min Protection class IP20 Parameter control via Allen Bradley PanelView Plus 700 Condition: Functional, professionally dismantled Note! System is sold without the Cognex camera system Further information available upon request

Condition: good (used), Year of construction: 2016, overall weight: 10,000 kg, Equipment: documentation/manual, For Sale: - Manufacturer: ABB / Stelram - Brand: ABB / Stelram - Type: 2 robot cells, each with 4 pick and place robots. Total: 8 robots - Vacuum: Becker pumps - Camera system / Vision system Included: - Power cabinet - Manuals, software, spare parts lists, introduction lists, pneumatic and electrical diagrams - Infeed conveyor Todpfx Ajznd Sksmrec - 2 robot cells - 2 camera boxes - Conveyor belts Dimensions, complete with infeed: Length x width x height: 19.50 meters x 2.70 meters x 2.95 meters Transport and dismantling can be provided by us. This large robot cell is suitable for high speeds and larger products. If you have any questions or comments, please feel free to contact us. Sincerely, Leo Holland

Condition: ready for operation (used), Year of construction: 2019, Two Ivat filter towers for dust and smoke with temperature control and nanofilter are available. Air volume flow: 22000-25000m³/h, motor power: 18.5kW, max. separation efficiency: 99.95%, filter area: 120m², filter cartridges: 4, machine dimensions X/Y/Z: approx. 2000mm/1500mm/3000mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible. Todpfjyvuvljx Amrsc

Condition: used, Year of construction: 2016, machine/vehicle number: 0-261-04-6588 si 0-284-96-1130, functionality: fully functional, power: 21 kW (28.55 HP), input voltage: 380 V, input current: 30 A, input frequency: 50 Hz, type of input current: AC, edge thickness (max.): 3 mm, height adjustment type: electric, actuation type: electric, total height: 1,600 mm, total length: 12,000 mm, total width: 3,000 mm, overall weight: 10,000 kg, year of last overhaul: 2025, Equipment: documentation/manual, Technical data Machine length: 6060 mm Machine width: 1555 mm Machine height: 2300 mm Weight: 2600 kg Total power input: 21 kW (30 A) Compressed air: 6 bar Air consumption: approx. 350 l/min Extraction: 2820 m³/h (at 28 m/s) Maxim speed:18m/min General functions Workpiece thickness: 8–60 mm Max. feed speed: 18 m/min Double pressure from above for stability of the part Electronic thickness control Loc A U Uov Szt Dslccsai Frequency converter for feed Automatic lubrication of the feed chain Automatic motor calibration Touch control system Groups existent on the machine 1)Emulsion spray at the inlet and outlet Edge preheating 2)Pre-milling unit Tool diameter: 100 mm Tool height: 63 mm Diamond tool with replaceable knives Motorized removal adjustment 3)Gluing unit Glue and hot air application Heated application roller Quick exchange of the entire unit Automatic position adjustment via motor 3 pressure rollers Edging speed: 14 m/min 4)Cutting unit Twin-motor unit with automatic tilting Tilt up to 15° THK prismatic guide 5)Radius milling unit 2 tools Automatic adjustment in two axes Automatic overlap adjustment 6)Copying unit (2 motors) Automatic tool position change by servo motor Electromagnetic horizontal movement Vertical hydraulically damped movem Todpfsz E A T Ejx Amroc 7)Cleaning and polishing unit 8)Automatic return conveyor- Homag TFU 140

Condition: ready for operation (used), Year of construction: 2009, A wood dust extraction and filtration system Krämer for saw lines is available. 1) Wood dust extraction unit Krämer VKA-P 100/650/55, air volume flow: 27000m³/h, pressure increase: 3800Pa, motor power: 55kW, V-belt length: 3550mm. 2) Filtration unit Krämer GFS Shake 160/25/250, filtration capacity: 30000m³/h, filter material: polyester needle felt, material discharge: TFS40/10/1.1. 3) Fan Krämer VFM-R 45/250/3, air volume flow: 3000m³/h, pressure increase: 2500Pa, motor power: 3kW. 4) Fan Krämer VFM-P 42/200/4, air volume flow: 2500m³/h, pressure increase: 3000Pa, motor power: 4kW. 5) Separator tank/filter hopper Krämer. 6/7) 2x axial fans. Including pipes and peripheral equipment. The motor flange on the discharge motor is defective. Documentation available. An on-site inspection is possible. Tjdexl Elgopfx Amrjc

Year of construction: 2025, condition: new, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete Tedpolxyhfjfx Amrsc essentially consisting of: a) 1 cartridge dry filter, type PF 1.4.B62.00 5000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dust collection hopper with slotted valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of the filter cartridges - cleaning. Maintenance doors as swing doors Maintenance easy.

Condition: new, Year of construction: 2025, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: a) 1 cartridge dry filter, type PF 2.16.B250 for 30,000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dust collection hopper with slotted valve or rotary valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of filter cartridge cleaning. Todpfedrtaljx Amrec Maintenance doors as swing doors Maintenance easy.

Condition: used, Year of construction: 2005, functionality: fully functional, total width: 6,300 mm, total height: 2,100 mm, total length: 20,000 mm, working width: 2,600 mm, input voltage: 380 V, type of input current: three-phase, roll width: 2,600 mm, roller length: 7,600 mm, We offer this ready-to-use ICO SYSTEM reactive PUR hot melt press, model ICO SYSTEM, manufactured in 2005. ICO SYSTEM reactive PU hot melt press line – 2,600 × 7,000 mm For sale: complete industrial reactive PU hot melt press line for single-sided bonding of large sheet materials. This robust production line from ICO SYSTEM International Coating GmbH has been successfully used for years by TABB Interior Systems BV for the production of high-quality laminated sheet materials. The installation is in excellent technical condition, is fully operational, and can be put into production immediately. Key features: Reactive PUR hot melt bonding Maximum panel size: 2,600 × 7,000 mm Suitable for single-sided bonding Year of manufacture: approx. 2005 Fully functional and well-maintained PLC control with touchscreen Automatic vacuum portal for precise panel positioning Throughfeed system for controlled curing and constant pressing force Roller conveyors and transport tables included Suitable for: The installation is suitable for bonding a variety of flat sheet materials, including: plywood MDF HDF particleboard HPL composite panels aluminum and steel sheets various other industrial sheet materials. Production process The line is designed for an efficient and reproducible production process: positioning of the bottom sheet application of reactive PUR hot melt automatic placement of the top sheet using a vacuum portal passage through the heated press controlled curing and output of the finished product. Thanks to the automatic handling, large panels are produced quickly, accurately, and with consistent adhesive quality. Scope of supply The complete installation includes, among other things: ICO SYSTEM heated throughfeed system automatic vacuum portal with suction cups conveyor belts and roller conveyors control cabinet with PLC/HMI complete steel structure and handling. Tsdpfxezlh Aue Amrsc Condition The machine is fully operational, is still in use in production, and is available only due to a change in the production process. Inspection while running is possible by appointment. Interested? Please contact us for additional information, technical specifications, a demonstration, or an inspection. This high-quality industrial press line is ideally suited for companies that want to efficiently bond large sheet materials with a high-quality PUR hot melt bond.

Condition: used, Year of construction: 2015, Complete extraction system, with briquetting press Consisting of: Chip container approx. 10 m³ Filter unit approx. 140 m² Fan, frequency-controlled, 15 kW Container discharge Briquetting press 60 to 90 kg/h Recirculation air components Control systems complete Pipe components complete for the system Spänex extraction system: completely disassembled, ready for transport from a public sector facility Components complete for the system Fire alarm Baffle silencer 1200 x 900 2 channel bends 90° 600 x 600 Transition 90° 600 x 600 to 1200 x 600 Transition outlet 550 / 320 x 350 Connection vent 320 x 350 / 1200 x 900 Perforated recirculation air pipes for air distribution D 630 mm: 3 x 1500 mm 1 x 1400 mm Tjdpfxszy Sfio Amrjc 1 x 1300 mm 2 bends 450 mm 90 r=300 mm 3 bends 450 mm 90 tight r=200 mm 5 pipes 4450 mm 1.0 m 1 bend 560 mm 90° 2 pipes 560 mm 1.0 m in top condition low operating hours Manufacturer: Spänex extraction system / IPE press Year of manufacture: 2015 press, system 1996 GS-tested CE-type tested Afterfilter Suction/blowing nozzle mm: 400 Suction nozzle mm: collecting duct Casing Fire hose motorized shaking with discharge gear Air recirculation Number of filter hoses: 215 Filter hose length mm: 1050 Filter hose diameter mm: 200 Filter category: BIA-tested Cat G/C Fan kW: negative pressure, high-performance fan, frequency-controlled, 15 kW, 1996, 10670 m³/h at 2500 pa Fan diameter: 400 Fan Pa: 2500 Length mm: 4500 Width mm: 3000 Height mm: 3200 Briquetting press: used in top condition low operating hours Manufacturer: IPE Type: ECOpress 90/10 Year of manufacture: 2015 Machine no.: 016615 GS-tested CE-type tested Motor kW: 7.5 Press output kg/h approx. material-dependent: 60 - 90 Briquet diameter mm approx.: 60 Filling cylinder Screw feed Location 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without guarantee and warranty

Condition: good (used), Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system Cartridge dust extraction system -Manufacturer: TEKA, filter system for extraction system including control unit with frequency converter Tedpfszukp Asx Amroc -Type: ZPF9 -Cartridge filter: see photos -Inlet/Outlet: Ø640 mm / Ø640 mm -Extraction capacity: up to 20,000 m³/h -Note: A filter unit only, without a suction fan, can be supplied for an additional charge (ID38772) -Dimensions: 1840/1475/H2670 mm -Weight: 689 kg

Condition: good (used), 1 x Weighing and Bagging System Comprising of: - VFFS Bagger, 10 head multihead weigher, bucket elevator, outfeed conveyor, ICE printer, gantry rails on 3 sides. Cyclone 200B spec; Max speed 80 bags per min Bag width 60-200mm Beg length 50-280mm Tedpfxjzgc H De Amrsc Power supply 3 phase .375kw Comes with Ice printer *Please note that this machine does not come with steps - only the gantry rails on 3 sides* *UKFM can quote for dismantle of the system and delivery to mainland UK*

Condition: good (used), functionality: fully functional, Year of construction: 2004, overall weight: 300 kg, input voltage: 400 V, input frequency: 50 Hz, HOFFMANN FILTER FLEECE SYSTEM WITH REEL TYPE: HYDROSTAT HN0.6 MACHINE NO.: 0405364 YEAR OF MANUFACTURE: 2004 Technical Data: Operating Voltage: 400 V, 50 Hz Footprint incl. sludge tank: approx. 2055 x 1560 mm Filter area: 0.6 m² Filtration capacity (based on emulsion): approx. 165 l/min Inlet height: 488 mm Paint finish: RAL 9002, textured lacquer Weight: 300 kg Equipment: - Made of sheet steel, fully welded, base dimensions approx. 1500 x 1500 x 280 mm Filling capacity: approx. 460 l - 1 gear motor - 1 reel for winding up used filter fleece Todpfx Aex T Ah Djmrjc - 1 reel-disposal switch with “reel full” indicator - 1 coolant level switch - 2 pump mounts for user-supplied service pumps - 1 roll of filter fleece, width 1000 mm - 1 sludge tank - 1 complete electrical control system in a dustproof control cabinet with all switching, control, and monitoring devices, motor protection switches for each drive, control transformer, function indicator lamps, filter system wiring according to VDE 0113 - Documentation, 2 copies, German - EC Declaration of Conformity 98/37, Annex IIB

Condition: used, Year of construction: 2023, Used System Year of Manufacture: 2023 Condition: Like new, very few operating hours Features and Technical Specifications: ECO JET DUO 6 XL ZRS stationary clean air filtration system for extracting wood dust and chips Fans: 2 x 7.5 kW Airflow: 10,000 m³/h Vacuum pressure: 2,700 Pa (total) / 2,200 Pa (static) 80 filters, each 2.50 m long, BIA Category M, electrically conductive, incl. support baskets Filter area: 77.6 m² Filter loading: 129 m³/(m² x h) Filter cleaning: AL-KO OPTI-JET® Pressure relief areas: 0.84 m² (rupture discs) Base structure with hopper and rotary valve; dry conveying with C-coupling ECO JET DUO 6 ZWR XL, 1,100 mm spacer ring for raising the unit, with 2 intake openings Base unit with feed hopper and ZRS 960/1 FG rotary valve for chip disposal via a customer-supplied transport fan into a silo or similar; transport line DN 200, approx. 1,260 mm, connection to be provided by the customer Rotary valve ZRS 960/1 FG: - ATEX Directive 94/9/EC; CE 0588 Ex II 1D/- (unit for indoor/outdoor use); EX D; FSA 11 ATEX 1614X - Motor: 0.18 kW / 0.78 A, 3-phase / 400 V / 50 Hz - Protection class/enclosure type: IP 54 / B3; Insulation class F - Speed: 41 rpm; Flow rate: 15,744 l/h*; 7 cells - Inlet/Outlet: 960 x 250 / 960 x 208 mm Todpfjzlbqrox Amroc - Dimensions: 1,100 x 605 x 330 mm; Temperature range: up to 50 °C Additional features: - 400 mm suction inlet with check valve in rectangular duct - ECO JET backflow check valve 910 x 346 x 500 mm AL-KO Control System ACS II: - Touchscreen display, ST 1200 controller, Sitop Power power supply, 24 V control voltage, and integrated frequency converter for cascading up to 2 fans up to 37 kW with frequency converter transfer - Plain-text error messages on the display, as well as a collective error message and indicator light; manual start of discharge via display button and cleaning via button; cleaning start via differential pressure; Post-cleaning; external start via potential-free contact; operating hour counter; maintenance interval indicator; control cabinet lighting and ventilation; monitoring/evaluation of fire damper, residual dust sensor, fill level sensor, and maximum filter pressure - 10 individually controlled solenoid valves - Gate valve control in groups of 4 for up to 8 machines: control via potential-free contact (PFC) or induction coil; 24 V DC shut-off valves, motor-driven with single-wire control or electropneumatic; max. 4 plates per conveyor line - ZRS power module up to 0.18 kW; time parameters adjustable via touch display - Rupture disc sensor and evaluation unit; pressure transmitter for frequency converter; pressure cells; strobe light; 2 x PTC thermistor evaluations; rotation monitoring of the rotary valve - 24 V DC supply air/return air switching for summer/winter operation - Filter monitor/residual dust monitoring with evaluation unit in accordance with DIN EN 12779 and H3: If 0.3 mg/m³ is exceeded, a self-holding alarm is triggered and the recirculation damper switches to exhaust air - 10-terminal junction box, 24 V/230 V, fully wired for filter cleaning, including approx. 6 lfm of cable - Ducting system including elbows, branch pipes, reducers, PU hoses, machine connections, small parts, and EP dampers for exhaust from 11 woodworking machines 1 HRS as specified - Return air system in accordance with TRGS 553, with changeover damper and fire damper - Galvanized base frame for container l...

Condition: good (used), Year of construction: 2019, REF: MM6469 Complete tube filling and sealing system, comprising of the following equipment: Todpfx Ajzp E Sbsmrsc 1 x Collette high-speed mixer with 2 x mixing bowls (for batches of 150kg mix), pump and piping to feed directly from the bowl to the tube filling/sealing machine. 1 x Axomatic rotary tube filler and sealer. Manufacturer - Axomatic Srl. Type - AXO 1000 MATIC. Date of manufacture – 2019. Speed - 60 to 90 tubes/minute. Fitted with loading hopper, tube selector, detector for missing tubes on the carousel, filler, seal with code in seal, crimper (at top for waste) and exit chute. Supplied with Eurocold glycol chiller, pump, pipework and 2 x pallets of tubes. This unit has had all air pipes replaced. Previously used and set up for icing frosting tubes but the weight and tube size is variable (10g to 120g). Electrical requirements - 3 phase. Maximum air pressure - 8 Bar. Dimensions of AXO 1000 MATIC tube filling system - 2300mm long x 1400mm wide x 2350mm high. Weight of of AXO 1000 MATIC tube filling system - 1100 kg.

Condition: excellent (used), Year of construction: 2018, 1 x Zumex Food Engineering juice extraction and flitration system with elevator and squeezing kits. Manufactured completely in stainless steel. Technical specification ⚙️: ✅ Manufacturer - Zumex Food Engineering ✅ Model - Z450. ✅ Date of manufacture - 2018. ✅ Hopper capacity - 40 kg.  Performance Specification ⚙️: ✅ Sizes 9-10-11: Heat unit - Kit 9, Oranges/minute - 150.35, Output capacity - 902.4 kg/h, Litres/minute - 6.01 L/min, Litres/hour - 360.84 L/hr. ✅ Sizes 5-6-7-8: Heat unit - Kit 8, Oranges/minute - 133.68, Output capacity - 1145.4 kg/h, Litres/minute - 7.64 L/min, Litres/hour - 458.22 L/hr. ✅ Sizes 2-3-4: Heat unit - Kit 7, Oranges/minute - 116.94, Output capacity - 2338.8 kg/h, Litres/minute - 15.59 L/min, Litres/hour - 935.53 L/hr. PLEASE NOTE - Estimated calculations with a 40% juice performance of the oranges. Tjdpfjt Uircsx Amrjc FRUIT DIAMETER: Minimum:Ø55mm, Maximum:Ø100mm NET/GROSS:  750/960KG DIMENSIONS (L x W x H):  2.5 x 1 x 2.2m CONSUMPTION:  2.010W VOLTAGE: 380 V / 50-60 Hz / 3 phase.

Condition: used, Dimensions (L/W/H) 1400/2000 x1400 x3000 mm Tjdevwfu Aepfx Amrjc Dimensions (L/W/H) 1400/2000 x1400 x3000 mm 2x 220/1x 180 mm with 14 suction nozzlespneum. slide controlfan dischargevacuum system in compact designwith 12 built-in automatic slide valvesused, good conditionmake ALKOtype FU-2-12-800-70-III-Ano. 910225length 1400 / 2000 mmwidth 1400 mmheight 3000 mm12 x air intake D 180 with slide2 x air intake D 220 without slidecladdingshaking downwith discharge via fancompl. controlair return recirculation exhaust air D approx. 500 mmwith fan 2 pieceseach 0,9 3,0 kW - pole-changing motor1450 / 2800 rage location 97447 Gerolzhofendelivery as-is, free-loadedwithout guarantee and warranty

Year of construction: 2011, condition: good (used), Offer 24370 Sludge filtration system in a sea container + conveyor belt Todpfx Amot Srkporsc Technical data: - Sludge filter press JUNGHANS with cylinder unit - Flocculation system - Pumps - Separate conveyor belt for sludge removal, length 8.0 m - Control cabinet with electrical equipment - Water collection tray made of aluminum on the entire container floor - Lighting - Sea container with 4 doors - Space requirement for the container: approx. W 6.0 x H 2.4 x D 2.4 m - Weight: approx. 5000 kg - Space requirement for the conveyor belt: approx. W 8.0 x H 0.8 x D 1.0 m - Weight: approx. 1000 kg

Condition: excellent (used), Year of construction: 2022, Technical data: - Total filter capacity approx. 150 l/min - Filter fineness approx. 3 μm nominal - Dimensions (W x D x H) approx. 1400 x 1300 x 1100 mm - Tank capacity approx. 800 l Equipment: - 2 filter groups, individually backwashable, each with 1 TCF filter tower - 1 filter pump - 1 pneumatic unit - 1 manual sludge removal system with sludge bag - Internal system piping - Color RAL 7035 - 1 control cabinet, wired according to VDE standards, PLC control, operation and parameterization via touch panel 1 unit of machine supply pump for supplying the machine with filtered coolant as a submersible centrifugal pump Technical data: - Flow rate: approx. 70 l/min - Delivery pressure: approx. 5 bar - Drive: 400V, 50Hz 1 unit of cooling pump as a submersible centrifugal pump Technical data: - Flow rate: approx. 80-120 l/min - Delivery pressure: approx. 1.5 bar Todszk Ek Topfx Amrec - Drive: 400V, 50Hz, IE3

Condition: good (used), Hall extraction system, chip filter system, filter system, chip extraction, wood chip extraction, Radial fan, chip extraction fan, fan, suction, chip blower Todpfxorz Szas Amrjc -Manufacturer: Spänex, mobile filter system -Motor: Siemens 0.75 kW -Speed: 2850 rpm -Connection input: Ø 140 mm -Base: on wheels -Dimensions: 680/680/H2290 mm -Weight: 60 kg

Condition: used, Year of construction: 2011, Overview Todpfx Aezza Diemroc Complete turnkey craft brewery built around a 4-vessel Newlands Systems (NSI) brewhouse with a 35 hl brew length, delivered from Canada and installed in 2011-2013. The plant covers the full process chain: malt intake and milling, brewhouse, fermentation and maturation, yeast handling, CIP, steam and glycol cooling. Fermentation capacity is 9 x 70 hl cylindroconical fermenters plus 2 x 70 hl pressure-rated bright beer tanks. The brewhouse runs on a Siemens Braumat control system. The brewery is still installed and under power and can be visited in operation. Technical data - Manufacturer: Newlands Systems (NSI), Canada - Year of manufacture: 2011-2016 - Machine type: complete turnkey brewery, 4-vessel brewhouse - Brew length: 35 hl - Brewhouse vessels: mash mixer 44 hl, lauter tun 69.85 hl, boil kettle 58 hl, whirlpool - Fermentation and maturation: 9 x 70 hl fermenters, 2 x 70 hl bright beer tanks - Steam: 750 kW electric steam boiler, operating pressure approx. 4 bar - Control system: Siemens Braumat - Power supply: 3 x 400 V / 50 Hz Scope of Delivery - Brewhouse | Newlands Systems | 4-vessel, 35 hl brew length | Mash mixer, lauter tun with rakes, boil kettle with internal calandria, whirlpool, wort heat exchanger, progressive cavity grain-out and spent grains pumps, post-whirlpool solids filter | 2011 - Control system | Siemens | Braumat | Brewhouse control panel and operator station | 2011 - Hot liquor tanks | Newlands Systems | 2 x 60 hl, stacked | External steam heat exchanger, pumps and valving, 316 stainless wetted surfaces, water treatment dosing bin | 2012 - Fermenters | Newlands Systems | 9 x 70 hl working volume | Cylindroconical, 60 degree cones, standpipes, cooling jackets | 2012-2013 - Bright beer tanks | Newlands Systems | 2 x 70 hl working volume | Pressure rated, carbonation stone assemblies | 2012-2013 - Yeast storage tank | Newlands Systems | 700 l | Conical, cooling jacket, mixer | 2013 - Yeast propagator | Newlands Systems | 240 l working volume | 300 l total volume, AISI 304 stainless steel | 2012 - CIP station | Newlands Systems | Steam heating and pump | 2012 - Malt silo | MAFA Sweden | UNB 70 | 30 t capacity, outdoor installation | 2012 - Auger system | MAFA Sweden | Silo and mill connections, flexible auger, specialty grains dump hopper | 2012 - Malt mill | Bühler | 4-roller | 3.0 kW drive, ATEX marked | 2012 - Grist hopper | Newlands Systems | 1,000 kg | On load cells | 2012 - Electric steam boiler | Pannpartner | 750 kW | 3 x 400 V / 50 Hz, design pressure 16 bar, empty weight 800 kg, CE marked | 2011 - Glycol chiller | Daikin | Air-cooled water chiller, refrigerant R407C, 400 V | 2011 - Sterile air unit | Donaldson | 2016 - Pumps, fittings and accessories | 2012-2013 Condition Used - still installed and under power, available for inspection in production. Availability Immediately. Location: Norway. Dismantling, handling, packing and truck loading can be quoted on request (EXW).

Condition: good (used), Year of construction: 1994, functionality: fully functional, space requirement height: 2,440 mm, overall weight: 1,480 kg, pressure: 2 bar, total width: 1,300 mm, total length: 1,850 mm, total height: 1,650 mm, filter area: 0.75 m², operating temperature: 200 °C, ESTRELLA DN 1000 GLASS-LINED PRESSURE NUTSCHE FILTER High-quality pharmaceutical/chemical pressure nutsche filter manufactured by Estrella AG, Switzerland. Manufacturer: Estrella AG, Ettingen, Switzerland Todpfeu U Afuex Amrjc Year: 1994 Type: Pressure Nutsche Filter / Pressure Filter Diameter: DN 1000 Filter area: approx. 0.75 m² Material: Steel, highly acid-resistant, glass-lined Glass lining quality: ESTRELLA 2000 The unit is equipped with a heavy-duty hydraulic lifting and tilting system for opening the vessel. The hydraulic system is manually operated and integrated into the robust steel frame. Main equipment: - DN 1000 pressure nutsche filter - Approx. 0.75 m² filtration area - Acid-resistant, glass-lined steel construction - ESTRELLA 2000 glass lining - Large, hydraulically lifted and tiltable top cover - Manual hydraulic pump - DN 1000 x 370 top cover - DN 1000 x 550 center section - DN 1000 x 370 bottom section - Filter / perforated plate - 2 x DN 100 connections with sight-glass fittings - 3 x DN 50 connections on top cover - DN 50 bottom connection - Additional fittings and pressure gauge - Heavy-duty steel support frame According to the original manufacturer documentation, the ESTRELLA 2000 glass lining was high-voltage tested for porosity in accordance with DIN ISO 2746. The glass-lined surfaces are visually in very good condition. The blue enamel lining shows a clean and well-preserved appearance. The machine originates from pharmaceutical production. Original Estrella documentation, drawings, and historical manufacturing documents are partially available. Further technical documentation is currently being located and will be supplied if available. The original purchase price in 1994 was CHF 59,218 net, excluding transport and taxes. Inspection of the unit is possible at our warehouse in Switzerland by appointment. CYCRON GmbH Switzerland

Condition: used, Belt Filter, Pressure Filter, Emulsion Filter, Sludge Filter, Lubricant Filter, Emulsion Filter, Used Machine Manufacturer: Faudi Dimensions: 2460 x 1660 x 1270 mm Belt size: 2200 x 1270 mm Active filtering surface: 1400 x 1200 mm Capacity : 1200 l/m The Klappbandfilter is used for cleaning contaminated cooling and lubricating fluids in the metalworking field, as well as for processing various sludge waste during rough machining, especially aluminum, or for handling abrasive grinding sludge. When the cooling and lubricating fluids and grinding sludge are cleaned, they can be reused in the process for longer periods, significantly contributing to environmental protection. Additional benefits include heat dissipation at the machining site and optimization of the workpieces' surface quality. The Klappbandfilter is versatile and can also be used independently. Its modular design allows it to be optimally adapted to various conditions. The FAUDI design allows for the buildup and removal of filter cakes up to 15 cm thick. With the extra-high filter cake, the separation performance of the filter is further increased. Filter areas of 1, 1.5, and 2.5 m² per filter are possible. Filter fineness: Up to 10 µm Medium/Fluids: Tsdpfey Uc Uaox Amrjc Oils and machining emulsions Filter auxiliaries: Optionally with or without filter auxiliaries

Year of construction: 2023, condition: used, functionality: fully functional, machine/vehicle number: SN-22-1409, For sale is a high-quality extraction system from the brand Absaugwerk, year of manufacture 2023, specifically designed for the collection and filtration of welding fume (e.g. aluminum dust). The system meets the latest technical standards and includes: Equipment: • Extraction table with downward extraction • Integrated wet separator in line with the latest safety standards • Suitable for professional welding applications Tsdpfxox Da Tij Amroc • ATEX-compliant (Zone 2, Ex II 3G) • Power: 4.0 kW / 400 V / 50 Hz • Condition: almost as new, fully functional Collection by buyer. Assistance with dismantling/transport can be arranged if required. If you are interested or have any questions, please feel free to send me a message. On-site inspection by appointment is possible. More metalworking machines available, such as bench drill presses, press brakes, column drill presses, eccentric presses, heavy-duty racking, welding tables, MIG/MAG welding units, compressors, etc. – please check my other listings. Domestic price net plus VAT or Net export price Pick-up only – dismantling and transport by buyer or by arrangement. If you are interested or have any questions, please feel free to send me a message. More photos and technical details available on request. All information provided without guarantee or warranty. Subject to errors and prior sale. For further questions, please call. Nous parlons Francais / Мы говорим по русски We speak English / Noi vorbim româneste Viber / WhatsApp / Skype For an additional fee, we handle all customs and registration formalities. We transfer vehicles to the port for an extra charge.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, type of input current: three-phase, Carton sealer, packaging machine, carton sealing machine, sealing tape machine, adhesive tape machine -Manufacturer: Soco System, carton sealer type T-55 -Carton width: max. 550 mm -Overall dimensions: 1100/800/1750 mm -Weight: 150 kg This additional information is standard for this model. Please always double-check the details during a visit. The Soco System T-55 Cartoning Machine is a state-of-the-art packaging solution designed for efficient and high-speed cartoning of various products. With its advanced technology and robust construction, the T-55 is ideal for industries requiring precise and reliable cartoning, such as food, pharmaceuticals, cosmetics, and consumer goods. Featuring a compact and ergonomic design, the T-55 maximizes floor space utilization while ensuring easy operation and maintenance. Its modular construction allows for flexibility in configuration, enabling seamless integration into existing production lines and adaptation to changing packaging requirements. Todpfezhv Rlsx Amroc The T-55 Cartoning Machine offers versatile carton handling capabilities, accommodating a wide range of carton sizes and styles, including straight-line, reverse-tuck, and glue-sealed cartons. It utilizes advanced automation and servo-driven mechanisms to ensure accurate carton forming, product loading, and sealing, minimizing downtime and enhancing productivity. Equipped with intuitive controls and a user-friendly interface, the T-55 provides operators with easy access to machine settings and diagnostics, facilitating quick setup and changeover between different carton formats. Additionally, the machine incorporates safety features to protect operators and prevent damage to products during operation. Overall, the Soco System T-55 Cartoning Machine is a reliable and efficient packaging solution that meets the demanding requirements of modern production environments, delivering consistent performance and high-quality cartoning results.