Used Strand-Pelletizing Cutting Length Adjust for sale (52,417)

Year of construction: 2000, condition: reconditioned (used), Stock - No.: 2107 1 used, partly overhauled and functionally tested strand-pelletizer COMAC Type SG-100 SV infeed width 100 mm Cutting Rotor width 110 mm, parallel cut with 32 teeth Rotor- Ø 200 mm >> strand-pellet cutting length adjustment 2 drives: 1x for cutting-Rotor - 4 kW 1x for infeed-roller 1,5 kW with STÖBER reduction-speed gear Noise protected housing of pelletizing Chamber Inspection visit / trial-run shortly by appointment possible. We can also offer suitable strand-cooling bath, strandb-blower or Fodpfeiyyc Eox Akysgh pellet classifier ex stock. More strand-eplletizer and other pelletizing systems/units ex our stock availabe ( waterring - , hot-face- and underwater pelletizing )

Year of construction: 1996, condition: reconditioned (used), Stock-No.1624 Strand "spagetti" pelletizer Capacity 500 kg/h Drive 4 kW Rotor width 200 mm - double bearring materials: PP,PE,PS,PET,PC,PA div material Noise- protected housing box OPTIONAL against additional cost: Fodpfx Asby I Syjkyegh adjustable pellet length device Ask for our machine-stock-list, with more pelletizing equipment ex our stock availabe.

Year of construction: 2000, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 071, Stock no. 2806 1 used, partially overhauled, and functionally tested strand granulator Fgodpfxjz A R Ilo Akyeh Type SG-60 E Cutting rotor with single-sided bearing Rotor diameter 160 mm x width 70 mm Rotor with helical cut, 30 teeth, 2° Strand inlet width: 60 mm Up to 12 strands according to the manufacturer Cutting chamber with sound insulation 2.5 kW - AC drive, adjustable via frequency inverter Ready for demonstration at our plant in Wuppertal We have other strand granulators ready for demonstration. Please inquire about our current machine stock list.

Condition: used, Cut-to-length line Bronx 2050x8mm x35t (A3781) for coil metal cross cutting into sheets of required sizes with different length and width. Thickness Range: 2 – 8 mm Coil Capacity: 35t Coil OD: 2100mm Coil ID: 508mm , 610mm , 762mm Strip Width: 2000mm – 600mm Sheet Length: 8000mm – 600mm Pack Weight: 10 t Max Line Speed: 60 meters/min Cuts Per Minute: 35 Complete Line With 4 Coil Storage Storage Ramp Coil Loading Car Double Stub Mandrel Uncoiler Sliding Base Hydraulic Expansion Drag Brake Tension Control Peeler / Hold Down Roll 3 Roll Coil Breaker Feed Up Table 7 Roll Backed Up Leveler with Pinch Roll Breaker (9 Rolls Total) Entry Power Pinch Rolls 3 Flights Top & Bottom Back-Up Rolls Entry & Exit Pinch Rolls Marking Unit Measuring Roll Pinch Rolls Bronx Flying Shear AC Die Accelerator Flywheel & Air Clutch and Brake Rack & Pinion Accelerator 35 Cuts per Minute Reject Conveyor Fodpfx Aeq Ulh Hekyegh Twin Belt Gauging Table Stacker Side Squaring Lift Stacking Tables Photo Cells Drop Type Motorized End Stop Motorized Run Out Conveyor Upgraded AC Motors Upgraded Control Techniques Digital Drives Complete Line

Condition: excellent (used), Year of construction: 2024, operating hours: 100 h, functionality: fully functional, Sheffield HC-810 Automatic Hot/Cold Strip Cutting Machine with PF-33 Automatic Prefeeder Fgodsz Nyv Tjpfx Akyeh For sale: Sheffield HC-810 industrial automatic hot/cold cutting machine, supplied together with the Sheffield PF-33 automatic prefeeder. The machine is designed for precise and efficient cutting of webbing, straps, tapes, ribbons, and other textile materials. The hot cutting function allows synthetic materials to be cut and heat-sealed simultaneously, preventing fraying and ensuring clean, durable edges. The equipment is suitable for industrial textile production, including the manufacture of tactical equipment, belts, straps, bags, backpacks, and other products requiring accurate, repeatable cutting. Main features: * Automatic hot and cold cutting * Maximum cutting width: 6¼ inches (approx. 159 mm) * Electronic control panel * Programmable cutting length * Adjustable feeding speed * Automatic piece counter * Adjustable blade dwell time for thicker materials * Automatic material feeding * Precise and repeatable cutting operations * Suitable for nylon, polyester webbing, straps, ribbons, and similar materials * 220 V version Included equipment: * Sheffield HC-810CE-220V automatic hot/cold cutting machine * Sheffield PF-33-220V automatic prefeeder * Original operating manual * Additional accessories and parts shown in the photographs Automatic feeding system: The Sheffield PF-33 prefeeder facilitates the feeding of material from rolls, ensuring a consistent material supply during automatic cutting operations. The combination of the HC-810 cutting machine and PF-33 prefeeder provides an efficient solution for repetitive industrial cutting tasks, reducing manual handling and improving production consistency. Technical condition: The machine is 100% fully functional, in excellent working condition, and ready for immediate use. All functions operate correctly. The equipment requires no repairs and is ready to be integrated into a production process. The machine is used but remains in very good overall condition, with normal signs of industrial use. Additional information: * Manufacturer: Sheffield Cutting Equipment * Model: HC-810CE-220V + PF-33-220V * Year of manufacture: 2024 * Purchase date: February 2025 * Condition: Used, fully functional * Availability: Immediately available * Location: Gdańsk, Poland The machine can be inspected and tested by prior appointment. The equipment is offered as a complete cutting and feeding system, including the accessories shown in the photographs.

Condition: new, functionality: fully functional, Cutting rotor for a strand pelletizer Manufacturer: MAAG / Scheer - Cutting rotor width: 200 mm Fgedpjpgulwofx Akyeh - Excellent condition

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: Nr/ 531, We offer this Concept Stal - CS-GPW cut-to-length and slitting line, as new, year of manufacture 2020. Manufacturer: Concept Stal Model: - CS-GPW Fodeyi U Ugjpfx Akyegh Year: 2020 Condition: as new Category ID: 1043 Type ID: 1660 Type: Cut-to-length and slitting line If you have any questions or require further information, please send us a message or call us. The line consists of: 1. Sheet steel feeder stand, max coil weight 6000 kg 2. Working module 3. Guillotine 1250 mm 4. Sheet feeding and slitting module (roller blades) 5. Production table (automatic) 6. Product collection trolley 7. Protective film application module 8. Hydraulic-electric sheet coiling module 9. Compressor

Condition: new, IDEAL 1080 Krug & Priester Guillotine-style Cutting Machine Ideal 1038 cutting machine Work material knife, bevel angle 75° Ideal for cutting paper, cardboard, linoleum, plastic and metal films, thin sheets, and other materials Re-sharpenable knife set made of Solingen knife steel Complete with a solid base frame and foot pedal Fold-out side table, right Side guide with a scale in mm and inches Infinitely adjustable back guide with a locking screw Front guide with a locking screw and narrow-cut device Scale knob for precise adjustment of the front guide Printed DIN format scale from A3 to A6 Fixed, transparent knife guard made of shatterproof plastic and knife locking device Particularly stable knife bearing made of aluminum casting and double-mounted knife shaft for precise cuts Extremely robust metal construction GS tested safety mark Fgsdex R Scxjpfx Akyoh Brand quality, Made in Germany Cutting length: 800 mm Cutting capacity: approx. 20 sheets (70 g/m² paper) - 4 mm clearance height Table size (W x D): 605 x 800 mm Dimensions (H x W x D): 1215 x 670 x 1080 mm Width with the side table folded out: 890 mm Weight: 55 kg Item condition: new ideal 1038 cutting machine You can find more cutting machines in other sizes – new and used – in our shop! International shipping costs available upon request!

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, For sale is a robust Lazzari Juno 320 panel saw in a heavy-duty industrial design. This machine is ideally suited for professional use in carpentry, joinery, and interior design. Thanks to the easy-to-use sliding table, the generously sized machine table, and the 45° swivel function of the saw blade, the machine enables precise longitudinal, cross, and miter cuts. Technical data: Manufacturer: Lazzari Type: Juno 320 Year of manufacture: 2001 Main motor: 5.5 kW Voltage: 400 volts Speed: 3,200 / 5,000 rpm Cutting length / table length: 3,200 mm Table width to the right of the saw blade: 1,250 mm Machine weight: approx. 750 kg CE version Fgodpfxozn N Uko Akyeh Equipment: Sliding table 3,200 mm Saw blade, 45° tiltable Mechanical height and swivel adjustment Parallel fence with fine adjustment Angle/miter fence with scale Generously sized machine table Robust aluminum guide Control panel with emergency stop Speed control 3,200 / 5,000 rpm Heavy-duty industrial design Precise guide systems Dust extraction connections Ideally suited for: Solid wood processing Panel cutting Furniture making Interior design Carpentry and joinery workshops Series and individual production The machine is in good, used condition with the usual age-related signs of wear. It impresses with its stable design, high cutting precision, and reliable industrial drive. Inspection and a test run are possible at any time by appointment. Transport is possible for an additional charge! The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale, and changes are subject to change. All information without guarantee.

Condition: used, Year of construction: 2018, functionality: fully functional, number of straightening rollers: 6, conveyor belt width: 1,300 mm, sheet thickness steel (max.): 1 mm, coil width: 1,250 mm, cutting length (max.): 6,400 mm, straightening roller diameter: 70 mm, space requirement width: 3,500 mm, space requirement length: 18,275 mm, space requirement height: 4,000 mm, Single-person operation, rapid access to a wide variety of sheets, automatic sheet changeover, standard sheets remain loaded in the system; the upper sheets are less common types; secure solution with a movable access aid for loading the upper decoilers; programmable slitting line with 8 pairs of knives in station version; slitting knives are alternately arranged for distortion-free cutting; rotary knives of the AL p with 100 mm diameter to achieve minimal incision; 7.2 m long conveyor belt for discharging the strips. The system layout PDF is shown as a mirror image! Fgedpjxwc E Iofx Akysh

Condition: new, Aluminum format sliding carriage (anodized) with hardened steel guide rods. Kickback protection for thickness planer. Fgedevrvcaepfx Akyjh Anodized parallel stop with micrometric fine adjustment. Slant adjustment of the saw blade up to 45° using a handwheel. Table opening ø190 mm with under-table suction. Milling stop 180 mm. Built-in milling spindle lock. Laying table with telescopic stop, eccentric clamp, degree grid 100% Made in EU (developed, built, quality tested) Technical data: Surface planing unit: Table width: 410 mm Table length: 1800 mm Planing shaft diameter: 100 mm Number of planing knives: 4 pieces Shaft speed: 5000 Motor output power: 5 kW S6 400V (4 kW S1) Thickness unit: Thickness passage, min/max: 4 - 230 mm Feed speed: 7 m/min Milling machine: Useful length of the spindle: 125 mm Height adjustment of the. Spindle: 160 mm Max. tool diameter when profiling: 180 mm when tenoning: 250 mm Spindle speed: 8000/6000/3500/1400 Table openings: 190 mm Integral stop: 500 mm Motor output power: 3.8 kW S6 400V (3kW S1) Circular saw: Format table: 2300 x 285 mm Saw blade diameter max/min: 315 mm/250 mm Incline position: 90° - 45° Max. cutting height: 90° 45 ° Saw blade 315: 102/72 Motor output power: 3.8 kW S6 400V (3kW S1) Weight: 900 kg Optional accessories: Reversible blade (no extra charge) Spiral planer shaft Long hole board Scoring unit

Condition: excellent (used), Year of construction: 2015, operating hours: 16,000 h, functionality: fully functional, machine/vehicle number: 1.5x3m, conveyor belt thickness: 3 mm, coil weight: 20,000 kg, conveyor belt width: 1,500 mm, sheet thickness aluminum (max.): 3 mm, sheet thickness steel (max.): 3 mm, blade shaft diameter: 620 mm, load capacity: 20,000 kg, space requirement height: 3,000 mm, The line is in continuous use on the first shift. Manufacturer: China, plus 2 used straighteners for thick sheets additionally purchased. The line can be tested at any time. Operator training is possible. Fgjdsxf Ucbspfx Akyoh

Condition: new, Year of construction: 2026, PLC-controlled, compact slitting and cross-cutting line for thin sheet metal, designed for industrial cutting, and boasting very high quality. PLC control with touchscreen – the quantity and section length are programmed. Maximum sheet width: 1,250 mm Cutting performance for sheet thicknesses ranging from 0.5 mm to 1.2 mm, using SJ235JR steel sheet with a tensile strength of 360 N/mm², with three sets of slitting knife pairs. The slitting unit is an autonomous module. For quick adjustment of the rotary knife pairs, the slitting unit can be easily pulled out or pushed in. Alignment unit with eight hardened and ground alignment rollers. Adjustment of the lower alignment rollers is motorized. Rubber-coated feed rollers – this allows for the processing of coated sheets as well. Slitting shear with 3 to 5 knife pairs. Smallest strip width: 200 mm Maximum cutting speed: 20 m/min Fgodpfxez Ei D Rs Akysh Very fast, mechanically guided cross-cutting shear for absolutely clean, burr-free cuts. Voltage: 3 x 400 volts – fuse rating: 25 amps – total drive power: 5 kW Dimensions, excluding the outfeed table, approximately 3 m x 1.9 m x H 1.8 m Weight, approximately 2,800 kg

Condition: good (used), Year of construction: 1968, functionality: fully functional, Robust Altendorf F90 panel saw in a heavy-duty, solid design. The machine features a large sliding table with a cutting length of approximately 2,600 mm, a parallel fence, and a crosscut/miter fence. A cutting width of approximately 1,250 mm is available to the right of the saw blade. Fedsz D Uqtopfx Akysgh A classic, robust Altendorf machine for use in carpentry workshops and woodworking businesses. Technical specifications Manufacturer: Altendorf Machine type: Panel saw Year of manufacture: 1968 Cutting length: approx. 2,600 mm Cutting width to the right of the saw blade: approx. 1,250 mm Motor power: 5.5 hp / approx. 4.0 kW Voltage: 380 V Equipment Large sliding table Parallel fence Crosscut/miter fence Saw blade guard Manual adjustments Heavy-duty, solid design The machine is in used condition, commensurate with its age. Transport is possible for an additional charge! Note The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale, and changes are subject to change. All information is without guarantee.

Condition: used, Year of construction: 1982, Used cut-to-length line FIMI 1250×0.12-0.8mm x16t with two packing stations (A3793) is coil metal processing line to cut metal into sheets with required sizes. Such machine can be good solution for metal coil processing companies. Manufacturer : FIMI – Italy Year of manufacture : 1982 Revamping : 2008 (SEI SISTEMI) and 2019 (SEI SISTEMI) Ce marking : 2019 Material before processing : Max coil width 1250 x 0.12 Г· 0.80 mm. Uncoiler capacity : 16 Tons. Sheets dimensions : min. 300 x 500 mm. – Max 1250 x 2000 mm. Working speed 0-120 m/min. LIST OF MACHINES COMPOSING THE LINE ➢ STOCKING RAMP FOR 2 COILS ➢ COIL LIFT ON UNCOILER ➢ UNCOILER WITH SECTORS DIAM. 400 AND DIAM. 508 MM. ➢ PINCH-ROLL FOR STRIP FEEDING TO LEVELER ➢ 6HI-LEVELLER WITH INTERCHANGEABLE ROLL BENCHES – 1 BENCH FOR THICKNESS 0.12 ÷ 0.50 MM. – 1 BENCH FOR THICKNESS 0.50 ÷ 0.80 ➢ CONNECTION TABLE BETWEEN LEVELER AND PINCH-ROLL ➢ PINCH-ROLL Fgsdpfx Akettlfkeyoh ➢ DESCENT ROLLWAY IN LOOPING PIT ➢ ASCENT ROLLWAY FROM LOOPING PIT ➢ PINCH-ROLL WITH MOTORIZED ROLLS ➢ STRIP CENTERING DEVICE WITH VERTICAL ROLLS ➢ THICKNESS MEASURER TYPE ELECTRONIC KEYBOARD ➢ ROTATING SHEAR ➢ SWIVELLING CONVEYOR TO AVOID SCRAPS AND PARTS OF DEFECTIVE STRIP ➢ COLLECTION BOX FOR TRIMMING AND DEFECTIVE PARTS OF THE STRIPS ➢ SWIVELLING CONVEYOR TO AVOID SCRAPS AND PARTS OF DEFECTIVE STRIP IN THE FIRST AND SECOND COLLECTION BOXES AND STACK COMPOSITION ➢ CONNECTION ROLLWAY AND SECTION FOR CONVEYING OF SHEETS IN THE THIRD BOX. ➢ 3 STACK UNLOADING SHUTTLES TO CONVEY STACKS TOWARDS THE ROLLWAY ➢ 1 EVACUATION ROLLWAY FOR THE PACKAGING ➢ HYDRAULIC EQUIPMENT FOR ALL THE LINE ➢ INTRODUCTION STRIP OPERATION PULPIT LOCATED AT LINE ENTRY FOR COILS CUTTING ➢ MAIN PULPIT FOR ALL LINE OPERATIONS ➢ OPERATION PULPIT LOCATED AT LINE EXIT ➢ ELECTRICAL CABINET CONTAINING ALL ELECTRICAL/ELECTRONIC COMPONENTS AND PLC ➢ PHOTOCELLS AND SAFETY/PROTECTION BARRIERS.

Condition: good (used), Baumann Perfecta 115 Paper Cutting Machine Fsdpfx Akozz Hhneyegh The machine is in perfect condition and ready for production. Year of manufacture: 2021. Available immediately from stock. The guillotine can be used as a standalone unit or integrated with cutting systems. Program generation is menu-driven and includes a variety of cutting tasks, such as single cut, programming, multiple cuts, non-cutting hold-down, and automatic actual value transfer. Baumann Perfecta premium cutting machines are manufactured in Balingen, Germany. Distinguishing Features of the Baumann Perfecta Machine: – Interactive User Interface – 18.4” Touchscreen – USB Interface – Ethernet Interface – Windows CE Operating System – Positioning via Electronic Handwheel – Optimized Cutting Cycle – Programmable Hold-Down Pressure – Automatic Adjustment of Hold-Down Pressure to Cutting Width – Automated Front-Mounted Knife Change – Quick Knife Change – New Machine Body Cast in One Piece = Increased Stability – Maintenance-Free Electromagnetic Clutch Technical Data: Cutting Length: 1150 mm Maximum Stack Height: 165 mm Infeed Depth: 1150 mm Minimum Cutting Capacity with Sheet Metal Under Pressure Beam: 77 mm Minimum Cutting Capacity Without Sheet Metal Under Pressure Beam: 20 mm Maximum Saddle Feed Speed: 300 mm/s Maximum Mechanical Efficiency Knife speed: 44 cycles/min Saddle movement: above the work table Main motor power: 4 kW Net weight: 3200 kg The machine is equipped with a spare knife, cutting sticks, a pressure plate, documentation, and tools.

Condition: like new (used), Year of construction: 2015, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 5067, total width: 450 mm, total length: 500 mm, input voltage: 220 V, total height: 400 mm, cutting width (max.): 108 mm, number of blades: 2, table height: 600 mm, Equipment: CE marking, Hot & Cold Automatic Strip Cutting Machine It can cut elastic, webbing (up to ¼" thick), ribbons, belt loops, hook and loop fasteners, nylon cords, leather, safety belts, rubber, and vinyl. FEEDING SPEED – adjustable up to 13 inches per second. • CUTTING LENGTH – approximately 400 ft. • CUTTING WIDTH – 4 inches. • TOLERANCE – 0.05% of the total cut length. • QUANTITY – up to 99,999 pieces. • COUNTER – pre-set up to 99,999. • SAFETY – knife cover sensor – automatic stop when the roll ends. • AUTO – feed/reverse. Fgjdpfx Ajzut Axskyoh

Condition: used, The machine is designed to straightening and cut metal from a roll. Fully functional, straightening machine engine replaced a few years ago, Lenze. New software Lenze has been installed. The machine is programmable. Adjustable width, cutting length, sliding table. There is a remote control. There is an additional blade for the guillotine. Working width: 1500 mm Fgsdpfem E U Hijx Akyjh Thickness: up to 2 mm If you have more questions, we will be happy to answer them.

Condition: used, Year of construction: 1995, Technical details: sheet width: 1500 mm plate thickness: 1 mm control: Ducter 1500 total power requirement: 2,0 kW Fjdsu Tp N Depfx Akyogh CROSS/TRANSVERSE PART PLANT consisting of: Reel straightening machine and shears Shears: - cutting length 1500 mm - sheet thickness approx. 1.0 mm - operation via control panel and foot control - manual operation / automatic - table size 1530 x 400 mm - Rear end stop: adjustment range 1300 mm - Size: LxWxH: 1600 x 2.0 x 1350 mm Straightening system: - stand width 1585mm - Table size 1700 x 700mm with side stop 1x fixed and 1x adjustable (manual) - 2 pcs. infeed rollers, revolving, Ø 50 x 1670mm - Straightening rolls: 2x opposite draw rolls (2x top/2x bottom) both driven, adjustment path 10mm vertical - continuous rollers: 3x top running, manual adjustment 8mm vertical and 4x bottom driven, fixed - Size: LxWxH: 1580 x 2050 x 1260mm Unwinding reel: - manual operation/handling - Spread max. Ø 520mm - Size: LxWxH: 550 x 800 x 1550mm The machine has a manual counter. accessories: - 1 pc. spare blade (must be regrinded) *

Condition: new, Year of construction: 2023, Cut-to-length slitting machine is used for longitudinal cutting of the metal sheets with maximum thickness 1mm, aluminum composite panels, paper, polycarbonate thanks to special cutting knives that are fixed on rolls of the slitting machine. Cut-to-length slitting machine SM 1250x8 lets you to cut the material into eight strips. The diameter of the rolls is 56 mm There are types of the sheet metal cut-to-length machines we produce: -Electric cut-to-length slitting machine SM 1250x4 (cutting for 3-4 strips) -Electric cut-to-length slitting machine SM 1250x8 (cutting for 6-10 strips) -Electric cut-to-length slitting machine SM 1250x12, SM 1250x20 (cutting for 12-20 strips) The operator of cut-to-length slitting machine can easily change the width of the strips and their numbers. There are special screws on the knives to do it. You can easily cut sheet metal right from the decoiler with our cut-to-length slitting machine. Cut-to-length slitting machine could be equipped with cross cutting knife. The machine has strong base to avoid deformation while cutting and lets to cut metal into 8 strips with the perfect quality. The cutting speed of the slitting machine is about 10 meters/minute. Cut-to-length slitting machine is electric so it doesn’t need any air or oil system to work. Electric consumption is 1.5 kW/hour. The voltage is 380V. It could be used in environment with temperature from -10 to +45 Celsius degrees. Our enterprise has started to produce this kind of cut-to-length slitting machine (slitter) since 2008 so we have great experience in doing our job and can propose great solution to your business. To get more information about the price of this slitting machine and the way it could be delivered to your location just contact us. We will give you all the information you may need. Fedpfxjf Epzgs Akyjgh Dimension: 170.00Sm x 120.00Sm x 100.00Sm Weight: 250.00Kg Engine: 1.1-1.5 kW

Condition: used, RSA center for high-performance cutting, deburring, cleaning, drying and stacking for steel and stainless steel tubes. Scope of Supply: - 1 RSA high-speed precision saw model RASACUT NC 1500 - 1 Transfer system between the RASACUT precision saw and the RSA tube feeding system 1500 - 1 RSA tube feeding system 1500 - 1 RSA cleaning system RASACLEAN ET 1500 Fgjdpfeymapqjx Akysh Including: - 1 RSA drying system TURBODRY - 1 RSA RASAPORT 1500 PR system High production High precision Very short setup times Easy handling Easy machine connection RSA High performance Saw RASACUT TWIN NC 1500: Fast and Precise Round diameter: from 10 to 40 mm Square size: from 10x10 to 40x40 mm Wall thickness: from 1 to 3 mm Material: steel and stainless steel Original lengths: 6,200 mm Fixed length cutting and deburring: from 200 to 1,500 mm Round diameter: from 10 to 40 mm Square size: from 10x10 to 40x40 mm Wall thickness: from 1 to 3 mm Material: steel and stainless steel Original lengths: 6,200 mm Fixed length cutting and deburring: from 200 to 1,500 mm

Condition: repair required (used), with two-sided cutting width adjustment, as spare parts carrier, frame width 705 mm, stroke 600 mm Fgodsmqkr Djpfx Akysh

Condition: used, Belt line cutting device, cut-to-length line, cut-to-length shears, lever cutting machine, lever cutter -Cut-to-length system: with additional lever cutter, made from slats/blinds production Fodpeqh Efiefx Akysgh -Cutting width: max. 210 mm -Cutting thickness: max. 0.5 mm -Lever cutter: IDEAL 2035 -Transport dimensions: 1025/500/H1240 mm -Total weight: 122 kg

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: SG10, PMH Filament strand pelletizer, Type SG10 compact machine with two drives for feeding and cutting rotor designed for one strand with max. 3.5 mm diameter Fodpfskyt T Sex Akyogh The speeds of both drives are infinitely variable. This allows for a wide range of pellet lengths

Condition: good (used), Year of construction: 2001, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 132, spindle speed (min.): 2,700 rpm, table height: 1,800 mm, table diameter: 800 mm, table width: 800 mm, table length: 200 mm, Profile saw for extrusion. Fjdpozw U Tqjfx Akyogh Synchronized with profile speed and cuts… repeated cuts! Ejection… piece counter.