Used Seho Powerselective for sale (10)

Year of construction: 2019, operating hours: 46,318 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 19051296729, No minimum price – guaranteed sale to the highest bidder! EQUIPMENT - Fixed double-lane pin chain conveyor module - Gripper head with rotation and tilt function - Workpiece carrier EDH-ER + G08 - Double preheating cassette, 8 × quartz radiators - Pyrometer control for quartz preheating Additional equipment details can be found in the attached PDF. Operating hours: 46,318 (as of 10.07.2025) Further information according to manufacturer – without guarantee. TECHNICAL DETAILS - Repeat accuracy: ± 0.1 mm - Rotation function: 0–270° - Soldering angle adjustment: 0–12° by tilting the gripper - Max. workpiece size: 500 × 500 mm - Max. solder tip temperature: up to 350 °C MACHINE DETAILS - Rated voltage: 230/400 V - 50 Hz Godpfx Aajwzu Ure Esud - Rated power: 18,000 W Dimensions & Weight Installation dimensions (W x D x H): 2,170 x 2,110 mm Nitrogen and compressed air connections - Nitrogen connection: R 1/4″, min. 4 bar - Nitrogen consumption (single nozzle): approx. 1.5–2.0 m³/h - Recommended nitrogen value: 5.0 - Compressed air connection: R 1/4″, min. 6 bar - Exhaust: 1 × 500–600 m³/h Commissioning note: The machine must be connected to the manufacturer via VPN once in order to reactivate the control system.

Condition: like new (used), Year of construction: 2018, The SEHO System 8140 PCS is a professional and extremely reliable industrial wave soldering machine. These systems are used in the electronics industry for soldering Through-Hole Technology (THT) printed circuit boards, including lead-free processes. The main features and specifications of the SEHO 8140 PCS on a carrier system type: Wave soldering system with continuous transport. Gsdpszdggkofx Aa Eeud Maximum soldering width: 400 mm. Fluxer: Equipped with an ATS spray fluxer or foam fluxer for extremely precise and economical dispensing. Preheat: Modular and powerful preheating zone (often expandable with IR, convection, and quartz) to gradually bring the printed circuit boards to temperature. Solder bath: Designed for both lead-containing and lead-free alloys (such as SAC305), often equipped with local nitrogen inerting to prevent oxidation. Control: Equipped with an industrial PC or microprocessor control (PCS - Process Control Software) that allows parameters such as transport and pump speed to be accurately stored and programmed.

Condition: used, Drying oven Seho GoReflow 1.8. 23101297679 unused 2023 price: €27,842 Gedpfox Tg Rcex Aa Ejud 23101297680 unused 2023 price: €27,842 22081297330 used 2022 price: €14,182

Year of construction: 2018, condition: ready for operation (used), functionality: fully functional, Wave soldering system with comprehensive equipment! A spare parts package worth approximately €20,000 is included in the sale and delivery! The system comprises the following components: - Seho wave soldering system MWS 2340-F - Fluxer SelectFlux - Streamline transport system including lifts TECHNICAL DETAILS - PULSAR preheating: 2 convection and 5 pulsar preheating zones (3,300 mm length) - Wetting length (soldering system): 40 mm + 30 mm - Return transport level: raised 405 mm - Finger conveyor: L-shape, short (3 mm) MACHINE DETAILS - Number of processed solder frames: 1,060,540 pcs EQUIPMENT - Fluxer SelectFlux - Streamline transport system incl. lifts - Automatic solder bar feeder - Process gas cleaning system - Finger cleaning unit - Foldable convection top heater - Fan speed monitoring for convection preheating - Standard soldering unit - Wide solder nozzle unit, 7-row - Solder frame transport system incl. 2 lifts - Cooling tunnel in the return transport of the soldering system incl. timer control - Solder frame lowering station - Replacement filter for condensate trap at machine infeed and outfeed - Residual oxygen measurement with lambda probe - Nitrogen economizing circuit Guodpfx Aeyt Nlbsa Ejd - Transponder system for automatic switching of soldering programs - Selective flux module (external unit) - Flow sensor for flux per spray head - Flux reservoir tank with connections - Replacement filters for external spray fluxer module – upper and lower machine sections - Spare PC

Year of construction: 2022, condition: used, Operational condition units. Multiple ovens available from 2017 to 2022. Ask for quotation! Gsdpfx Aaeyi Uu Ho Eeud

Year of construction: 2009, condition: ready for operation (used), Connected load: 18kW, was overhauled in 2017, an inspection is possible. Gsdpfx Ajn Htktja Esud

Condition: used, Year of construction: 2007, Professional combined painting and drying system with partition wall from Sehon, featuring a large cabin capacity and PLC control. Manufacturer: Sehon Innovative Painting Systems and Technology Model: SE-Professional Futura Year of manufacture: 2007 System type: Combined painting and drying system Cabin internal dimensions: 14,000 x 5,000 x 4,400 mm Cabin external height: approx. 4,900 mm Inlet/outlet gates: 2 units, front and rear Gate opening: 4,000 mm high x 4,500 mm wide Gate construction: insulated steel sandwich panel Gate panel thickness: 54 mm Housing: mineral wool-insulated steel cassettes Cassette thickness: 50 mm Housing color: RAL 9010 Pure White Material: chromated steel sheet Control: Siemens C7 PLC control Godey Tiaajpfx Aa Eoud Operation: Soft-touch panel with touch display Operating modes: Painting, drying, manual operation, timer operation Temperature control: stepless, microprocessor-controlled Filter monitoring: ceiling filter, pre-filter, paint separation mat Operating hour counter: integrated Alarm messages: visual and audible Pressure control: semi-automatic Supply air motor power: 7.5 kW Exhaust air motor power: 7.5 kW Motor power supply: 4 x 400 Volt Total connected load: approx. 37 kW Supply air unit: high-pressure radial fan Exhaust air unit: high-pressure radial fan Airflow rate control: adjustable motor slide Filter system: pocket filters on sliding rails Pre-filter efficiency class: EU3 Fresh air duct: galvanized steel sheet Exhaust air duct: galvanized steel sheet Fresh air duct height: approx. 6 m above floor level Exhaust air duct height: approx. 10 m above floor level Solvent pipe: available Hot air generator: indirect oil or gas firing Combustion chamber material: chromium steel V4A Combustion chamber material numbers: 1.4828 / 1.4541 Burner system: 4-pass system Oil burner: Elco-Klöckner Vectron L04.480 Duo Oil burner power range: 110 - 350 kW Gas burner: Elco-Klöckner EK04.34 G-ZVT1+QS Gas burner power range: 90 - 330 kW Gas burner design: Low-NOx with Quick-Start Type QS93 Solenoid valve: 1/2 inch Safety functions: safety and after-run thermostat Cabin construction: heat and sound insulated Condition: used Further painting equipment available upon request. System currently still in operation, available from June 2026.

Condition: good (used), Karl Krause Hot stamping press Manufactured by Karl Krause, Germany, The machine is fully operational, after modernization of the control system. Extendable work table. Timer control allows the machine to be started at a specific time to ensure it is ready for operation. Guodpfozlaalox Aa Ejd 380V power supply. Heating plate size: 400x530mm. Weight: approx. 800kg.

Condition: used, Complete factory for the production of furniture cabinets, composed by: SZ0M23) Angular Panel Saw "GIBEN" Tip 17 (mm 5600x2700) with "SIRIO" automatic unloading and stacking system SZ0M25) Panel Saw “GIBEN” Mod. GammaDue (mm 3800x2200) SZ0M26) Panel Saw (Multi-saws) “GABBIANI” (finished panels mm 4250x2120) SZ0M27) Laminating Line “BARBERAN” for melamine papers (glue on paper) SZ0M29) Pressing Line “COLOMBO REMO” (mm 1400 x 9600) for paper / veneer / laminates SZ0M30) Pressing Line “FRIZ” (mm 1400 x 6200) for paper / veneer / laminates SZ0M41) 4-sides Sizing & Edge Banding Line “IMA” Combima fast handling “RBO-BIESSE” SZ0M42) 4-sides Sizing & Edge Banding Line “IMA” Combima softforming with a second double side Sizing & banding machine STEFANI and automatic handling equipment “TOMASSINI” SZ0M39-40) Edge Banding Line (single side) for narrow pieces “HOMAG” Mod. KAL 310 with Splitter "NARDELLO" Mod. Elegance SZ0M35-36) Multi-Borer “BIESSE” Techno Logic with Loader + Unloader “TOMASSINI” SZ0M45) CNC Multi Boring and Dowels Inserting Line “BIESSE” Techno FDT with fast handling “RBO-BIESSE” SZ0M37) CNC Working Center “MORBIDELLI” Mod. Author 600 KL SZ0M56) Reel Cutting and winding machine “CEFLA-DUSPOHL” Tipo RSW 2200 T SZ0M01) Wooden strips end-cutting Line "OGAM+SALVADOR" SZ0M07) Wooden strips end-cutting and stacking Line “SALVADOR+SACOT” SZ0M08) Wooden strips end-cutting and stacking Line “SALVADOR+CMA” SZ0M11-17) Preparing Line for honey-comb panels SZ0M18) No. 6 Mutli-openings (daylights) hot hydraulic presses "COLOMBO REMO" SZ0M21) Sizing and top & bottom Calibrating line for honey-comb panels "GABBIANI + CELASCHI + ELMAG + COSTA Sanding Machines" And many other machines (i.e. multi-borer "VITAP", circular saws, glue spreaders, etc.), saw-dust suction system, rollers ways, shelvings, fork-lift, transpallets, etc. Machines still installed at the end-user's factory. They can be inspected by appointment. Gjdpfx Ascr U Urea Esud

Condition: used, machine/vehicle number: 8427, * Amazone Horse Hopper 1500 Smart Cut * Working width: 1.50 m * 1,500 L collection hopper capacity * Tractor 3-point linkage * H60 wing blades * Support rollers * Mulching device * PTO shaft with overrunning clutch * Collection hopper with hydraulic floor emptying * Rotation speed: 2,650 rpm * Fill level indicator -----Internal vehicle number: 8427 WhatsApp support available! If you have any questions about the machine or need further information, feel free to contact us conveniently via WhatsApp. Whatsapp Whatsapp ----Subject to errors and prior sale. Gjdpfxsrhy H Ro Aa Eeud