Used Schlatter/Smei Pg 24 for sale (10,245)

Condition: excellent (used), Year of construction: 2003, working width: 215 mm, welding power (max.): 750 kVA, Complete Mesh welding/Lattice girder factory Factory consists : - Mesh welding line SCHLATTER PG 24 , Semi- automatic , Year - 2002 - Lattice Girder Line SMEI , Full automatic , Year - 2003 - Straightening and cutting machines 1x Wafios R4 2 x VITARI NR16 1X VITARI NR10 - Cold drawing line SMEI , Input wire max.10mm, Speed - 4m/sec. - But welding achine SMEI Nwodpfx Ameqy Ek Asysi - Wire sharpener SMEI

Condition: refurbished (used), SCHLATTER Welded wire mesh production line MG24 Full revamped WORKING RANGE Panel width: max. 2500 mm Nedpfx Aowu Tu Demyewi Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 - 1600 mm Spacing between extreme warp wires: max. 2400 mm Mesh length (warp wire length): max. 2500 - 6000 mm Spacing between warp wires: min. 100 mm Spacing between weft wires: 25-250 mm Adjustable by cutting device (0-1) Warp wire diameter: 4.0 - 12.0 mm Weft wire diameter: 4.0 - 12.0 mm Number of warp wires: max. 24 WELDING MESH MACHINE MG 24.1/8C, Basic equipment including: - 1 Machine frame - 1 Upper support for press reception, continuously adjustable by hand crank - 1 Magnet supports with retaining magnets and weft wire monitoring. - 1 Row of pneumatic solenoid valves for press actuation. - 1 Installation for air and water. - 2 Pneumatic rotary drives with oil damping - Static motor torque with 5 bar compressed air: 480 Nm - Front continuously adjustable from: 25 - 250 mm adjustable by cutting device (0-1) - 1 Advance carriage with panel lifting device - 1 Set of tools for machine adjustment WELDING SECTION 8 Type C Transformers Rated power of each transformer: 100 kVA No-load secondary voltage: 7.1 V Rated secondary current: 14 kA 8 Thyristor contactors ES 130 12 Welding presses: 5.0 kN 12 Chain current bridge for spacing of warp wires: 50-100 mm 12 Chain current bridge for spacing of warp wires (for offset warp wires): 100 mm 10 Chain current bridge for spacing of warp wires: 100-150 mm 8 Chain current bridge for spacing of warp wires (for offset warp wires): 150 mm 6 Chain current bridge for spacing of warp wires: 150 - 200 mm 6 Chain current bridge for spacing of warp wires (for offset warp wires): 200 mm 24 Lower electrode holders Cu with standard angled electrodes and each with a water-cooled current cable, width: 58 mm 24 Wire clamping pliers Panel width: max. 2500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 - 1600 mm Spacing between extreme warp wires: max. 2400 mm Mesh length (warp wire length): max. 2500 - 6000 mm Spacing between warp wires: min. 100 mm Spacing between weft wires: 25-250 mm Warp wire diameter: 4.0 - 12.0 mm Weft wire diameter: 4.0 - 12.0 mm Number of warp wires: max. 24

Condition: excellent (used), For sale: SEW-EURODRIVE WA20/T DT71D6/BMG/TH geared motor with a built-in 24 V DC electromagnetic brake. The unit is fully functional, tested, and ready for use. The technical condition is very good. The housing has normal signs of use in the form of minor scratches and abrasions, which do not affect the operation of the device. Technical data: Manufacturer: SEW-EURODRIVE Gearbox model: WA20/T Motor type: DT71D6/BMG/TH Power: 0.25 kW Supply: 3×230/400 V Δ/Y Frequency: 50 Hz Nwsdpfx Aezn Npzsmysi Rated current: 1.48 / 0.85 A Motor speed: 880 rpm Output speed: 45 rpm Torque: 37 Nm Gear ratio: i = 19.50 Protection class: IP54 Insulation class: F Brake: 24 V DC Braking torque: 5 Nm Weight: 11.66 kg

Condition: excellent (used), For sale: SEW-EURODRIVE WA20/T DR63M6/BR/TH geared motor with a three-phase motor and a 24 V DC electromagnetic brake. The unit is fully functional, tested, and ready for operation. The technical condition is very good, with normal signs of use and minor scratches on the housing. Technical specifications: Nodpezn Ngaefx Amyjwi Manufacturer: SEW-EURODRIVE Gearbox model: WA20/T Motor type: DR63M6/BR/TH Power: 0.12 kW Supply voltage: 3×230/400 V Δ/Y Frequency: 50 Hz Current: 1.00 / 0.57 A Motor speed: 900 rpm Output speed: 15 rpm Torque: 32 Nm Gear ratio: i = 60.00 Ingress protection: IP54 Insulation class: F Brake: 24 V DC Weight: 9.46 kg

Condition: used, Year of construction: 2010, Mobile measuring arm for measuring machine, measuring device Manufacturer: Zett Mess Type: AMPG 2400 Precision Year of manufacture: 2010 – unused Nedpfx Aewu E D Romyowi Measuring diameter: 2,400 mm 22726

Condition: excellent (used), For sale: SEW-Eurodrive WA20/T geared motor with a three-phase DR63M6/BR/TH motor and an integrated 24 V DC electromagnetic brake. The unit is 100% functional, tested, and ready for operation. Before sale, the geared motor was thoroughly inspected and operates flawlessly. The motor housing has some broken cooling fins, which are clearly shown in the pictures. This damage is purely mechanical and does not affect the proper operation, performance, or reliability of the unit. Apart from that, the geared motor shows normal signs of wear and tear resulting from use. Technical specifications: Manufacturer: SEW-Eurodrive Gearbox model: WA20/T Motor type: DR63M6/BR/TH Power: 0.12 kW Supply: 3×230/400 V AC, 50 Hz Motor speed: 900 rpm Output speed: 15 rpm Gear ratio: i = 60 Nedpfx Aoznaq Nemyewi Torque: 32 Nm Electromagnetic brake: 24 V DC Protection class: IP54 Insulation class: F Rated current: 1.00 A (230 V Δ) / 0.57 A (400 V Y) Power factor (cos φ): 0.65 Duty cycle: S1 Weight: 9.46 kg

Condition: excellent (used), 24 linear meters of SSI Schäfer Palflex pallet racking, including shelf inserts Nwsdpsiauh Tjfx Amysi Used, in good condition, see photos Height: 4 m Depth: 105 cm Beam length: 2.95 m Load capacity per shelf: 2400 kg Frame galvanized, beams red Negotiable price: €2,890 net from stock Offer includes: + 9 units of pre-assembled frames, 12-ton bay load, depth 105 cm, height 4 m + 32 units of beams, length 2.95 m, 2400 kg load capacity per shelf + 64 units of safety locks + 18 units of concrete anchors + 48 units of shelf inserts/depth supports for 16 levels of 2.95m each Load capacity sign Goods are in stock. Transport and assembly available upon request. Inspection possible at any time by appointment. Further information available upon request. We constantly have over 5,000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, information and prices, as well as prior sale! See our general terms and conditions, all prices excluding VAT, ex works.) Lenox Trading – Top warehouse technology & used & new heavy-duty racking Description: Are you looking for high-quality warehouse racking for sale? With approximately 100 employees, Lenox Trading is one of the largest dealers for new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking immediately available • 20,000 m² of storage platforms & steel platform systems immediately available • 30–50 semi-trailer loads of goods turnover weekly for maximum selection 📦 OUR RANGE (BUY CHEAPLY ONLINE): Whether it's pallet racking, heavy-duty racking, high-bay racking, shelving racking, tire racking, or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer warehouse technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest, SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND ACTIVITY: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a complete, all-round package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete stock including broom-clean clearance. 2. Commission auction: Conducting auctions on behalf of clients. Our full service provided by our own employees: cataloging, office preparation, inspection, goods delivery, logistics, dismantling and broom-clean handover. Whether you found out about us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking system – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: good (used), functionality: fully functional, We offer for sale a complete line for multi-point automatic welding of SCHLATTER brand steel wires. We have three fully operational production lines. There are also automatic machines for the production of transverse wires (so called slitting machines with a cutter). We also have a number of single point welding machines for steel wires. Nwodpfx Astvpilemyoi

Condition: good (used), Bandall BA 24/15-30 Banding Machine One of the most recognizable banding machines in the world, a market leader. Manufactured by Bandall, the Netherlands. Machine in very good condition, recently serviced. Year of manufacture: 2016 The machine operates in manual or automatic mode. Production version, for heavy loads. The machine is mounted on a standalone frame with wheels for transport. Operates on jumbo rolls. After inserting the material, the machine wraps it with tape, compresses, and seals it, creating an elegant package. Ideal for wrapping business cards, leaflets, and other materials. Controlled via an LCD panel. Technical specifications: Tape width: 30 mm Performance: 36 cycles/min Nwodszlgd Djpfx Amysi Machine opening dimensions: 320 x 160 mm A roll of film is included.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, working range: Nwsdpfx Amsy Er Uqeyji X-axis: 2.000 mm Y-axis: 1.200 mm Z-axis: 190 mm welding power: 20 kA welding force: 2 x 5 kN

Condition: ready for operation (used), Rexroth MHD093C-024-PG0-BN permanent magnet motor, serial number: MHD093-29338, professionally and completely overhauled and tested, with a 12-month warranty. 100% functional. Scope of delivery as shown in the photos. The agreed-upon sales discounts do not apply to this item. Please request the price separately! Njdpei D Nkgjfx Amyswi

Condition: ready for operation (used), Rexroth MHD093C-024-PG1-BN Permanent Magnet Motor, serial number: MHD093-29342, professionally and completely overhauled and tested, with a 12-month warranty. 100% functional. Scope of delivery as shown in the photos. The agreed-upon sales discounts do not apply to this item. Please request the price separately! Nwedpfx Amji D Nkneyoi

Condition: new, Grundfos CRN3-19 A-P-G-V-HQQV vertical centrifugal pump, serial number: 0001, with MG90SB2-24FT115-H3 motor / 85U05906, unused with signs of storage, 100% functional, scope of delivery as shown in the photos. Njdpfxezkxg Is Amyowi

Condition: new, Grundfos CRN3-19 A-P-G-V-HQQV / A96516928P11017 vertical centrifugal pump, serial number: 0001, with MG90SB2-24FT115-D1 motor, serial number: 85D05906, unused, 100% functional, scope of delivery as shown in the photos. Nwsdpfxezknyqs Amysi

Condition: new, Grundfos CRN3-19 A-P-G-V-HUBV / A96448517P10214 vertical centrifugal pump with MG 90SA2-24FT115-C2 motor, serial number: 85805906, unused, 100% functional, scope of delivery as shown in the photos. Nodpfx Aozknywsmyjwi

Condition: ready for operation (used), Year of construction: 1995, machine/vehicle number: 060-8433, Cutting length: 3,500 mm Nwodpfx Aozl Hhvomysi Support carriage travel: 3,800 mm Bridge carriage travel: 3,500 mm Vertical adjustment: 400 mm Cutting wheel diameter: 625 mm Maximum cutting depth: 210 mm Blade drive motor: 12 kW, 2 speeds: 950 and 1,450 rpm Rotary table Laser

Condition: good (used), Touch screen, control panel, display, operator panel, PLC, Simatic Panel PC, touch screen, touch panel, touch screen panel, Simatic Multi Panel, Touch Multi Panel, touch screen Nodpeykpm Hjfx Amyjwi -Manufacturer: Axiomtek, Touchscreen Panel 18.5" -Type: P6187WPG-24VDC-V2 -Voltage: 24VDC 0.68A -Dimensions: 460/55/H285 mm -Weight: 4.8 kg

Condition: good (used), Year of construction: 1976, Spot welding machine, spot welding system, spot welding gun, resistance spot welding machine, lever-action spot welding machine Nsdoc N Uabspfx Amyewi -Stationary -Operation via hand switch -Arm length of welding machine: 350 mm -Welding pliers type: -Steering -Machine dimensions: 1500/1000/H1670 mm -Machine weight: 774 kg -Dimensions of control cabinet: 1550/420/H1960 mm -Weight of control cabinet: 330 kg

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: GN2.372.44.32, Schlatter roll seam welding machine, type no. GN2.372.44.32 Njdjy U Uz Sopfx Amyowi Very well-maintained machine in good working order, with product cooling and extraction system. Complete documentation is available. See the photo of the type plate for all details. For more information, please contact Theo Ligtenberg.

Condition: like new (used), Year of construction: 2017, operating hours: 1 h, functionality: fully functional, We offer refurbished turbines from a hanger-type shot blasting machine - Cogeim PG 10x15/2TR, year 2011. Shot blasting machine, sandblaster, blasting turbine, sand blasting, shot blasting. Nwsdey Nwq Sopfx Amyei

Condition: ready for operation (used), Heidenhain PGM 246 119 axis display SN: 7700397A, used, in good condition, 100% functional, scope of delivery as shown in the photos. Nwsdpfx Asy Nqk Sjmyji

Condition: used, Year of construction: 2017, Equipment: all wheel drive, Beautiful, clean machine – top-notch equipment! Machine handover to the customer: 08/06/2018 Every service performed by Liebherr – last service at 10,020 hours on 03/13/2025 Liebherr L 546 Z 2plus1, Chassis No. VATZ1560CZB045579 Year of manufacture: 2017 Operating hours: approx. 10,711 4-cylinder inline engine, 120 kW / 163 hp, water-cooled with turbocharger, emission stage 4 Operating weight: approx. 14,300 kg Length: 7,200 mm, Width: 2,500 mm, Height: 3,280 mm * Ride oscillation damper – boom dampening * Automatic climate control – maintains the set temperature * 3rd and 4th hydraulic control circuits for attachments such as high-dump bucket, grapple bucket, etc. * Ride oscillation damper BSS – boom dampening * Central lubrication system, factory-installed by Liebherr * Filter screen in front of the cooler prevents contamination * Cooler with coarse mesh for easier cleaning * Reversing fan for cleaning the cooler – reverse operation * Climbing aid in front of the windshield for easier cleaning of the windshield * Air filter with pre-separator “TopSpin” for pre-cleaning the intake air * Premium display with touchscreen * Driver's seat “Comfort” with pneumatic suspension, seat heating, and headrest * Adjustable steering column in height and inclination * Armrests on the left and right * Hinged window on the left in the driver's door * Radio * Lamp bracket for front headlights made of steel instead of plastic * 4 work lights on the roof of the driver's cab at the rear, LED * 4 work lights on the roof of the driver's cab at the front, LED * 2 auxiliary headlights on the hood at the rear * Reversing warning system (audible - beeper), can be switched off * Rear-view monitoring with camera * Tow hitch at the rear * Crane eyes at the front of the frame and at the rear * Tires 20.5 x 25 VA 2 x 40% * Tires 20.5 x 25 HA 2 x 40% * Windshield cracked!!!! Net price with permanently mounted 2.8 cubic meter bucket: 55,900.00 EUR net + VAT Optional equipment available at an extra cost: * Hydraulic quick coupler: 3,550.00 EUR * Grapple bucket, 3 cubic meters: 3,980.00 EUR * Volume bucket, 5 cubic meters: 3,990.00 EUR * High-dump bucket from 3-5 cubic meters: from 3,950.00 EUR * Pallet forks, 5 or 8 tons: from 2,190.00 EUR * Can also be supplied with a scale: * e.g. Pfreundt WK 50: 3,900 EUR * Also available with printer * All prices are net for export – plus 19% VAT for domestic sales. Njdpozfymljfx Amyewi We can gladly offer the transport to your location. Sale only to businesses or for export. Sale in "as is" condition, as the machine stands. No guarantee or warranty. The stated mileage or operating hours are read from the odometer or hour meter; we do not guarantee the accuracy of this information! Subject to prior sale. The vehicle description does not constitute a binding offer, and the information provided is not to be regarded as guaranteed characteristics. The description and the information contained therein serve only for general identification of the vehicle and do not constitute a guarantee in the sense of contract law. The information does not claim to be complete. The information/descriptions and images provided are non-binding and do not constitute guaranteed characteristics. Only the specifications in the order confirmation and invoice apply. The seller assumes no liability/warranty. The advertisement may contain typing and data transmission errors. The seller has not inspected the machine. Equipment may be subject to separate charges.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, working width: 1,650 mm, wire diameter (max.): 7 mm, Schlatter MG930, quick change, DC welding machine with 5 DC transformer, 1092 kVA. Schlatter control from 2007 with S7-300 PLC. Automatic line wire loader up to 3m, automatic line wire channel positioning, open portal DC welding machine, quick change cross wire hopper, MLV1 pullout and stacker. Nwodszd Suljpfx Amyji

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, input voltage: 230 V, measuring range X-axis: 200 mm, measuring range Y-axis: 85 mm, measuring range Z-axis: 50 mm, total width: 483 mm, total length: 598 mm, total height: 464 mm, overall weight: 64 kg, input current: 5 A, repeat accuracy: 0.005 mm, input frequency: 50 Hz, Equipment: CE marking, USB port, documentation/manual, type plate available, PG1000-400 – Optical system for inspecting the geometry of rotating cutting tools PG1000-400 is a professional optical measuring and inspection system for quickly checking the geometry of cutting tools. It is designed for tool manufacturers, sharpening shops, grinding shops, tool rooms, CNC machining centers, and quality control/metrology departments. Its main application is the inspection of rotating cutting tools after manufacturing, grinding, sharpening, or reconditioning. The system is suitable for HSS and solid carbide tools, especially drills, end mills, step drills, reamers, taps, form tools, micro tools, and custom-made tools. The device can also be used to inspect carbide inserts, selected thread geometries, screws/bolts, and other precision parts, provided that the geometry being inspected is optically accessible to the camera. The system's primary focus is on the inspection of cutting tool geometry. Typical applications: - In-process inspection directly at the grinding machine or in production - Incoming and outgoing inspection of tools - Inspection after sharpening/regrinding - Quality documentation and measurement reports - Repeated inspection of serially produced tools PG1000-400 allows for the inspection of, for example: - Rake angle and clearance angle - Helix angle - Point angle for drills - Radii and corner radii - Diameters and distances - Cutting edge length - Land width, margin width, facets - Web thickness - Tool profile - Runout - Condition and wear of the cutting edge - Comparison of geometry with DXF/DWG drawings The system operates optically and non-contact. This is advantageous when inspecting sharp edges, fine microgeometries, coated tools, and precise edges, where speed, repeatability, and minimizing operator influence are important. The system includes REACTION software, developed specifically for the inspection of cutting tools. The software offers more than 50 measuring functions, edge detection, automatic alignment of measuring points to the edge, saving inspection scenes, comparison with DXF/DWG geometry, PDF reports with PASS/FAIL evaluation, and data export to Excel/CSV. Technical specifications: - Recommended tool diameter: 0.635–75 mm - Tool measuring length: approx. 190–200 mm - Magnification range: 12.5× to 145× - Camera: 5 MP - Monitor: 27" 4K Ultra HD Nwsdjzdz S Tspfx Amysi - Measuring range: 85 mm vertically × 200 mm horizontally - Accuracy/repeatability: ±5 µm at maximum magnification - Device dimensions: approx. 598 × 483 × 464 mm - Weight: approx. 64 kg Offered configuration: - PG1000-400 optical cutting tool inspection system - M / F / A encoders - PC with REACTION software - 27" 4K Ultra HD monitor - Flexible LED lighting with diffuser - Curved magnetic diffusion plate - Rotating base block for clamping fixtures - 1000-026-5"-ASS – 5" V-block assembly with insert, top clamp, and stop - Basic remote operator training About the manufacturer: PG1000 is based on the long-term development of systems for inspecting cutting tools. The first generation of PG1000 was introduced in 1993. The system is manufactured in the USA by PG Inspection Technologies LLC, which specializes in this product line. Since 1996, more than 1000 PG1000 systems have been delivered. Condition and delivery: - New machine - Year of manufacture: 2026 - Warranty: 12 months - Location: Czech Republic / EU - Delivery, assistance with commissioning, and training according to agreement - CE marking and relevant EU documentation The device i

Condition: excellent (used), -Dimensions: 610x780x1410mm -Production: 12-40L per hour Nwjdewxu Sfopfx Amyoi -Serial number: 1807850/2350 -Year: 2008 -Voltage: 400V -Power: 4.6kW -Weight: 280kg This pasteurizer stirs, heats, cooks, pasteurizes, cools, matures, freezes, and preserves your recipes in a single, fully automatic cycle managed by the AUTOFRIGOR programmable controller (comparable to Carpigiani, Bravo Tritico, etc.), without any transfer or handling, ensuring maximum hygiene. All stainless steel construction Model: PG 24.60 Cooling: Condensation per cycle: 4 to 10 Production: 12 to 40 liters per hour. Electrical power in kW (400/3/50): 5.2. Dimensions in cm (W x D x H): 61 x 78 x 141. Net/Gross weight in kg: 250/280.