Used Rotary Sieve for sale (3,933)

Condition: new, Year of construction: 2025, functionality: fully functional, Conical rotary sieve for filtering juices, mounted on a stainless steel frame; integrated juice collection tank 150 l, equipped with a filling level sensor for automatic switching of the subsequent juice pump depending on the filling level. Pjdpfx Aoq H Axxek Djpr Diameter: 550 mm Screen perforation: 0.3 mm Power supply: 3x400V, 50 hz, 0.5kW/16A

Condition: new, Rotary Sieve, Drum Sieve Machine Function: - Classification and fractionation of flour Obtained Fractions: - Wholegrain white flour - Wholegrain flour - Semolina - Bran - Corn polenta - Protein from oilseed cake after oil pressing Classifies flour produced from the following products: - Cereals - Pressed seeds - Dry-milled fruit powders, herbs Main machine components: - Frame - Safety switch - 380V Motor - Housing - Hopper - Sieve drum - Outlet - Cooling motor Manufactured in stainless steel. Model: 200/1300 Podpoxvw Syjfx Ak Depr Motor: 0.37 kW Capacity: 200-500 kg/h (max 1000 kg/h)

Condition: like new (used), KEK Kemutec rotary screener centrifugal screen Type: K650 C Engine power: 2.2kW Working pressure: 0.8 bar Basket size: 650mm x 250mm Inlet diameter 80mm Podpjwyf Igjfx Ak Dopr Outlet diameter 80mm See our other advertisements VMA Wekerom

Condition: used, machine/vehicle number: 12531, AZO Rotary Sieve New Motor Sold with 7 synthetic sieve sleeves: 0.2 mm / 0.5 mm / 0.6 mm / 1.4 mm x 2 / 1.5 mm / 4.5 mm Electric: 400 V Pedpfx Akjwpwklj Dopr Motor Power: 1.5 kW Sieve Inlet (mm): 250 x 250 Sieve Diameter (mm): 175 Sieve Length (mm): 340

Condition: new, Year of construction: 2026, functionality: fully functional, power: 11 kW (14.96 HP), A triple pass rotary drum dryer is a type of industrial dryer that is used to reduce or remove moisture from a material. It gets its name from the three rotating drums through which the material passes, each with a different purpose in the drying process. This type of dryer is commonly used in the production of various bulk solids, including minerals, agricultural products, and biomass. Pedpfxjq Nfuzs Ak Depr Here are the key features and components of a triple pass rotary drum dryer: 1. Triple Pass Design: - The material being dried passes through three rotating drums or cylinders, hence the term "triple pass." Each drum serves a specific purpose in the drying process. 2. Material Flow: - The material enters the dryer and first passes through the innermost drum. After the initial drying phase, it moves to the middle drum and then to the outer drum, undergoing additional drying in each pass. 3. Heat Source: - Heat is typically provided by a combustion system, such as a burner or furnace, located at one end of the drum dryer. The hot gases generated by the combustion process flow through the rotating drums, transferring heat to the material. 4. Air Flow: - The dryer is designed to optimize air flow through the drums, ensuring efficient drying. In a triple pass design, the material and hot gases move counter-currently through the three drums, enhancing heat transfer and drying efficiency. 5. Lifting Flights or Lifters: - Lifters are internal components inside the drums designed to lift and cascade the material as it rotates. This movement promotes good heat transfer and uniform drying. 6. Retention Time: - The triple pass configuration allows for an extended retention time of the material in the drying system. This longer exposure to heat enhances the drying efficiency, making the triple pass rotary drum dryer suitable for materials with high moisture content. 7. Cooling Section: - After the material completes the three passes and reaches the end of the drum dryer, a cooling section may be included to reduce the temperature of the dried material before it is discharged. 8. Applications: - Triple pass rotary drum dryers are used in various industries, including agriculture (drying crops like grains), minerals (drying ores or concentrates), and biomass (drying wood chips or other organic materials). 9. Efficiency and Energy Consumption: - Triple pass rotary drum dryers are known for their high efficiency due to the extended drying time and effective heat transfer. However, they may have higher energy consumption compared to single or double pass dryers. When selecting a triple pass rotary drum dryer, it's essential to consider factors such as the type of material to be dried, required moisture reduction, and overall processing requirements. Proper design and operation are crucial to achieving optimal drying performance. Technical details We have different options for different requirements, please contact our team for more info.

Condition: like new (used), Year of construction: 2013, Manufacturer: Kaeser Kompressoren, Germany YOM 2013 Maximum Pressure: Up to 13 Bar Productivity 8.26 cubic meters/min Ppsdpfx Akeyy U Shs Dor Energy Efficiency: The direct drive coupled with IE4 efficiency motors (or IE5 on SFC models) ensures superior energy efficiency. Low Maintenance: Components are designed for long service life, with easy access for maintenance. SIGMA Control 2: Ensures efficient monitoring and control of the compressor. Rotary compressor type Screw by lubrication Oil Noise level 70 dB Height 1900 mm Length 1110 mm Width 1760 mm Weight 1250 kg Electrical parameters Mains voltage 380~400 V Power consumption 45 W Current frequency 50 Hz User characteristics Compressor cooling system Water cooling is possible, with subsequent use of heat. Complete system ready to use fully automatic extremely effective sound insulation vibration insulation powder-coated housing parts for ambient temperatures up to +45°C easy maintenance: lubrication nipples for motor bearings are located on the outside (also for fan motor).

Condition: new, Year of construction: 2026, power: 11 kW (14.96 HP), Rotary drum dryer for drying various kinds of materials like sand, biomass, sawdust, red mud, bentonite, coal Diameter: 1200mm Length: 10000mm Power: 11-13KW Gradient: 3% Capacity: 1.5-3 t/h Weight: 14Tons Besides this model, we also have the other models of rotary drum dryer 1500x12000mm, 2400x20000mm, and complete drying system for various materials, welcome to contact us for more details Our factory can design suitable solution according to your specific requirements. Rotary drum dryers are highly efficient machines used extensively in the processing of wood chips, sawdust, and biomass. They operate by utilizing a rotating drum that heats and dries the materials as they are transported through the cylinder. The design of these dryers allows them to handle a wide range of particle sizes and moisture levels, making them suitable for various types of biomass. They can also tolerate high-temperature exhaust gases, which contributes to their efficiency and versatility in industrial applications. Rotary Drum Dryer for Wood Chip, Sawdust, Biomass 🌳 Introduction to Rotary Drum Dryers In the realm of biomass processing, moisture control is key. Enter the Rotary Drum Dryer, an indispensable machine designed to efficiently reduce the moisture content of wood chips, sawdust, and biomass. This essential tool enhances productivity, improves fuel quality, and is pivotal in biomass energy production. Let’s explore its functionality and benefits! 💡 💼 Key Benefits of Using a Rotary Drum Dryer 1. Energy Efficiency: Designed to optimize energy use, Rotary Drum Dryers consume less power while delivering high drying efficiency. 🌿💡 2. High Capacity: Capable of handling large volumes of biomass, these dryers are perfect for industrial applications where large-scale drying is needed. 🏭 3. Improved Product Quality: By achieving the optimal moisture content, the dryer enhances the quality of biomass for fuel, pellets, and other applications. 🔥 4. Versatility: Suitable for a wide range of materials including wood chips, sawdust, and various types of biomass, making it a versatile tool in any biomass processing plant. 🌳 # Application Fields and Materials of Rotary Drum Dryer II. Application Fields A. Agriculture - Drying of grains, seeds, and forage. - Processing of agricultural by-products like straw and husks. B. Food Industry - Dehydration of food products such as fruits, vegetables, and spices. - Preservation of food quality during drying. C. Chemical Industry - Drying of chemical powders, granules, and crystals. - Application in the production of fertilizers and detergents. D. Mining and Minerals - Drying of ores, coal, and mineral concentrates. - Reduction of moisture content for easier handling and processing. E. Construction Materials - Drying of sand, cement, and other construction aggregates. - Preparation of materials for manufacturing processes. F. Pharmaceuticals - Drying of pharmaceutical powders and active ingredients. III. Materials Processed by Rotary Drum Dryer A. Organic Materials - Biomass, wood chips, sawdust, and animal feed. B. Inorganic Materials - Sand, clay, limestone, and gypsum. Psdpjq Igyvsfx Ak Djpr C. Waste Products - Sludge from wastewater treatment plants. - Industrial by-products for recycling or reuse.

Condition: good (used), Revent Single Rack Oven Ppodpfx Ajyw T D Dek Der Rotary Rack Oven Complete with one mobile oven rack In good working condition

Condition: good (used), Table size:1500x1500mm Podpfxjfvqmxo Ak Dopr Capacity : 6t Dimension: 1600x2500x2000mm Hydraulic

Condition: used, Round sieve - weight: 780 kg - manufacture: Bühler Pjdpfx Aksvv Eb Hj Depr - model: DFDT-31 - year of production: 2005 - capacity: 8-10 t/hour

Condition: good (used), Year of construction: 1992, functionality: fully functional, Technical details workpiece diameter 1000 mm workpiece weight - kg Ppedoy Idrtspfx Ak Der workpiece height - mm grinding wheel motor 11 kW total power requirement 25 kW weight of the machine ca. 6500 kg dimensions of the machine ca. 4100 x 3200 x 2600 mm Additional information Machine comes from a plant closure Equipment: Coolant system 500 liters with paper belt filter 4 grinding stones (3 of them unused) Technical data: Rotary table diameter 800 mm Max. distance from rotary table to grinding spindle center 850 mm Grinding wheel diameter 400 mm Grinding wheel width 80 mm

Condition: used, Rotary valve, rotary airlock Manufacturer: TrennSo Ppjdpfoy Icntsx Ak Dor Type: AS 600x1400-6 Working width: approx. 1400 mm Rotor with flexible, replaceable rubber lips With free shaft end, without drive Condition: unused

Condition: like new (used), Year of construction: 2019, Arburg 1200 T 2000-800 (vertical machine with rotary table 1200mm) Clamping unit 2000T Table diameter: 1200mm Angle rotation: 180 degrees Clamping force: 200 tons Opening force max. kN/mm: 115/500 Platen daylight max. : 600 mm Injection unit Screw diameter: 45 mm Shot volume: 318 cm3 Shot weight: 291 g Ppodpfx Aswugczok Dor Injection pressure: 2470 bar 1. Model: T model 2. Machine type: 1200 T 2000 - 800 3. Plasticizing unit: Thermoplastics cylinder 45 mm, highly wear-resistant 4. Screw: Reinforced screw coupling for splined coupling geometry 5. Control system: SELOGICA ‘direct’ controller 6. Technology stage: Stage 2 servo-regulated with 2 control pumps 7. Rotary table: Advanced ergonomics special model, 2-station 180° forward/backward alternating 8. Nozzle: Open nozzle 45 mm with nozzle tip 9. In-mould needle nozzles: Electric & hydraulic control for needle nozzle 1, electric & pneumatic control for needle nozzle 2 10. Heating: Heater band for open nozzle, 9 electric heating control circuits for mould heating 11. Clamping platen: Mould mounting platen set, central diameter 125 mm 12. Blow unit: Mould blow unit with pressure reducer at station 1 13. Safety: Optical barrier at loading station, continuous oil cooling and filtration 14. Hopper: Adapter (extension) for feed hopper, machine delivered without 50 L hopper 15. Robot interface: Interface for robot system for station 2 & 3 (based on EM67/1) 16. Electric axes: Basic equipment for electric axes control 17. I/O: 4 programmable inputs/outputs on terminal rail 18. Sockets: Additional socket combination (1 CEE, 1 Schuko) 19. Interfaces: Temperature control device interface (REGLOPLAS), printer USB interface, Compact Flash, EUROMAP 65 chip card user authorisation 20. Acoustic alarm: Error alarm acoustic signal 21. Safety interlock: Interface for safety interlock of door (EUROMAP 73) 22. Cooling circuits: 3 regulated machine-related cooling circuits with flow indicator, 3 manually adjustable cooling circuits for second water manifold 23. Anti-corrosion: Anti-corrosion treatment for rotary table, sealing lip on outer diameter 24. Manual & labels: CD operating manual & spare parts list, Slovak language labels 25. Machine feet: Anti-vibration footplates 26. Other: Hydraulic ejector, external cycle start key, standard equipment packages, new ARBURG colour scheme 27. Display languages: IT/EN/SK

Condition: used, Rotary valve, rotary airlock Psdpfoy Ia Tmjx Ak Dspr Manufacturer: TrennSo Type: AS 600x1400-6 Working width: approx. 1400 mm Rotor with flexible, replaceable rubber lips With free shaft end, without drive Condition: unused

Condition: like new (used), Kitagawa MR200 rotary table Condition: new, unused Ppodpfxoy H Ewnj Ak Dsr The table has been kept in storage and not used

Condition: like new (used), Year of construction: 2023, load capacity: 2,000 kg, Sideros turning device, column lift rotary unit, one side mobile with positioning table, 2-ton load capacity. Brand new, year of manufacture 2023, unused, with remote control. Minimum working height 350 mm, maximum working height 1800 mm. Torque 3000 Nm. Speed 1 rpm. Vertical adjustment speed 560 mm/min. Vertical lift 1450 mm. Clamping plate diameter 600 mm. Motor power 4.45 kW. Rotary movement 0.75 kW. Lifting motor 1.85 kW. Unit height 2505 mm. Weight approx. 1050 kg. Condition as new, unused. Shipping possible. Includes documentation, plans, etc. Ppjdpfx Akoy Hl H Ne Djr

Condition: used, Dividing Head Center Height: 100 mm Transmission Ratio: 40:1 Spindle Taper: SK 40 with M16 draw thread Pedsy E T Dgepfx Ak Dspr Clamping Surface: 240 x 200 mm Grid Pattern on Clamping Surface: 210 x 125 mm, Ø 14 mm - 3-jaw chuck Ø 125 mm with step jaws - Crank handle with indexing plate and sector arms - Crank handle with swing-out indexing plate for direct dividing - 1 indexing plate with hole counts: 15, 18, 21, 29, 37, 43, 51 - 1 indexing plate with hole counts: 16, 19, 23, 31, 39, 47, 53 - 1 indexing plate with hole counts: 17, 20, 27, 33, 41, 49, 57 - 24-position index (15° increments), graduated scale on work spindle - Complete dividing head, rotatable and tiltable on the base plate Dimensions (L x W x H): 410 x 370 x 300 mm Net weight: 48 kg Good condition

Condition: used, functionality: unexamined, Kaeser CB131 C – Blower Compressor / Rotary Lobe Blower Technical data: • Rated drive motor power: 15.0 kW • Maximum final pressure: 1.81 bar Podpfx Akey Idqie Djpr • Capacity: 7.93 m³/min (≈ 475 m³/h) • Block speed: 3,560 rpm • Permissible ambient temperature: 3 – 40 °C • Total weight: approx. 570 kg Location: 6460 Imst, Tyrol (Brennbichl 20) Note: The machine is located in a basement room and must be removed before collection. Offered for sale by Auction House Köck on behalf of the insolvency administrator. Viewing possible by appointment.

Year of construction: 2016, condition: used, functionality: fully functional, Rotary Die Cutter RD-4055 (2016, Used) Configuration: - FFU-4055 - RD-4055 - SPC-4055 - BT-4055 - LDK-4055 Pedey D Rzgopfx Ak Dspr Specifications Paper Feeding System: Air Hole Belt Paper Size (Before Processing): Max: 400 mm (W) × 550 mm (L) Min: 200 mm (W) × 275 mm (L) Processable Materials: Normal paper, coated paper, cardboard Non-processable Materials: Sheets with laminated (polypropylene-coated) backing or plastic film Material Thickness: 127–400 gsm Feeder Stack Height: 500 mm Production Speed: Up to 6,000 cycles/hour (die-cut roller)

Condition: used, R80SM is a model of the rotary copy shaper (router-shaper) by Rye Machinery Ltd (High Wycombe, England) Details of the R80SM model Podpfx Aoyrphmok Djpr - Machine type: Automatic rotary shaper with single or dual spindle for shape copying in furniture wood (shaper/copy router). - Application: Processing of furniture legs, frames, profiles – table rotation copies template onto the part. Typical technical parameters R80 - Rotary table diameter: approx. 1600 mm (as in similar model R80 SM Speedmax). - Motor power: approx. 5–7.5 kW per spindle, speed 6000–9000 rpm. - Tables: Hydraulically/pneumatically rotating, with clamping. - Lubrication: Exactly as on the nameplate – Shell/Telania grease daily at red points.

Condition: used, R80E MC is a model of the rotary copy shaper (router-shaper) by Rye Machinery Ltd (High Wycombe, England), manufactured in 1983 (serial number 112/83). Details of the R80E MC model - Machine type: Automatic rotary shaper with single or dual spindle for shape copying in furniture wood (shaper/copy router). - Year of manufacture: 1983 (112/83 – 112th machine in 1983 or December 1983). - Application: Processing of furniture legs, frames, profiles – table rotation copies template onto the part. Typical technical parameters R80/R80E - Rotary table diameter: approx. 1600 mm (as in similar model R80 SM Speedmax). Pjdpfx Aksyrn Raj Djpr - Motor power: approx. 5–7.5 kW per spindle, speed 6000–9000 rpm. - Tables: Hydraulically/pneumatically rotating, with clamping. - Lubrication: Exactly as on the nameplate – Shell/Telania grease daily at red points.

Condition: new, all stainless steel turn table new diameter 1.250 mm adjustable height 820 – 910 mm safety guard (height 10 mm) 1 speed (3 rpm) Psdpjytn Nxefx Ak Dopr 0,12 kW also available with variable speed

Condition: excellent (used), Year of construction: 2004, Year of manufacture: 03/2004 7.5 kW 240 m³/h -600 mbar Connection 400V Pjdpfx Aey H Dxqek Djpr Dry-running displacement machines The compact units consist of a rotary lobe blower stage with vertical conveying direction, motor, belt drive, flanges, filters, silencers, suction or pressure connections, pressure/vacuum relief valve, and check valve (for pressure operation). Apparently unused

Condition: good (used), Year of construction: 1998, machine/vehicle number: A 2146, Offer 23351 Hydraulic Welding Turning and Tilting Table – Three Axes – Welding Manipulator Technical Data: - Max. load capacity: 750 kg - Faceplate diameter: 700 mm - Min. table height in horizontal position: approx. 750 mm - Max. table height in horizontal position: approx. 1390 mm - Working height manually adjustable in 3 stages - Faceplate motorized, rotatable, tiltable, and inclinable - Stepless electronic speed control for rotation: approx. 0.01 – 2.0 rpm - Right and left rotation Pjdpfey Hql Dex Ak Dopr - Welding current transmission: approx. 700 A - Drive: 400 V - Connected load: 1.5 kW - Handheld remote control for rotational direction, tilting, and inclination - Electric foot switch - Required space: approx. W 1500 x H 750 x D 800 mm - Weight: approx. 500 kg

Condition: used, Year of construction: 2000, overall weight: 260 kg, table diameter: 70 mm, Rotary Table Table diameter 250 mm Spindle bore Ø 70 mm Weight 260 kg Podpfx Ajy Eglkjk Djpr If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.