Used Rausch Rs 10 X 915 for sale (79,539)

Year of construction: 1962, condition: good (used), machine/vehicle number: 1083, Broaching Machine - Vertical Manufacturer: Rausch Bsdjfc T Euepfx Amrodh Type: RS10/915 Machine number: 1083 Year of manufacturing: 1962 Force: 10 Tons Stroke: 915 mm System DIN 1415 With pedestal for upper-floor positioning

Condition: refurbished (used), functionality: fully functional, Year of construction: 1988, machine/vehicle number: 3615/673, input voltage: 400 V, input frequency: 50 Hz, broaching length: 1,000 mm, number of broaching positions: 1, broaching speed: 3 m/min, reverse speed: 3 mm/s, total length: 750 mm, total width: 800 mm, total height: 2,250 mm, -WR 177- Manufacturer: Rausch Model: RS3 /1000 Machine No.: 3615/673 Year of Manufacture: 1988 Weight: 350kg Overhaul: 04/2025 by Wiemers AG General / Technical Data: Unused, partially overhauled, mechanical vertical broaching machine Rausch RS 3 without CE marking Pulling force: 3,000kg Broaching speeds: 3m/min Return speed: 3m/min Maximum stroke: 1000mm Maximum tool length: 1200mm Table size / work area: 430mm x 320mm / 340mm x 220mm Table through-hole: Ø 90mm for standard broaching mandrels "System Rausch" Workpiece diameter: any (with the cabin removed) Broaching capacity / keyway width: up to 18mm in steel (from 16mm keyway width only with offset tool shank) Dimensions (h x w x d): 2,250mm x 800mm x 750mm (h = including 3-sided protective cabin) Motor: 3.0kw / Power supply: 400V / 50 Hz Equipment: - Protective door with safety monitoring (emergency stop circuit) - Chip chute - Externally adjustable tool length adjustment system (System Rausch) - Protective cover for stroke adjustment and electrical switching units - Electrical sensing of the clamping jaws (System Rausch) (Tool removal control to prevent unintentional retraction of the drawbar, providing additional safety for the operator & tool) - Integrated coolant system - 4-sided enclosed splash guard hood with protective door - Extra reinforced chip basket and chip sieve with magnet insert - Control panel external - 2 grease points for the trapezoidal spindle drive with manual grease gun directly on the spindle nut Note: The machine has been partially overhauled by Rausch. The following wear parts have been replaced and renewed. Bdodpfx Amoz Hl U Ioroh - New trapezoidal spindles and spindle nuts made of cast, wear-resistant bronze - All bearings and seals are new - New electrical system - 4-sided enclosed splash guard hood with protective door at the front - New protective door instead of the light barrier in the machine room - New clamping jaws - All sheet metal parts, such as covers, chip chute, basket, sieve and spindle protection, are new. - External control panel General The double spindle drive ensures a smooth and central pulling point as well as a constant broaching speed. The machine is primarily designed for the production of keyways up to 18mm. (from 16mm keyway tools only with offset tool shanks) Due to its design, the machine can be quickly and easily set up for broaching with flat broaching tools for keyways. Due to the structurally universal design of the drawbar and the machine table, broaching with profile and flat broaching tools is possible without the use of additional draw heads.

Condition: ready for operation (used), Vertical – Rausch Milling Machine Type RSIZ 6 / 1000 S Condition: Used Technical data: Working range: up to 1000 mm Cutting speed: 3 to 5 m/min Return speed: 10 m/min Internal milling: largest workpiece diameter 600 mm External milling: area of the clamping plate 600 x 340 mm Coolant system Traction force measuring device Central lubrication, automatic Spindle protection with coil spring spirals Chip conveyor Cycle counter Dimensions: 1.05 m x 0.9 m x 4.3 m Weight: 1200 kg Self-collection or shipping by freight forwarder. We will gladly assist you in organizing cost-effective shipping. You are welcome to visit us for an inspection. Bdedpfx Amedyp Rmoreh You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. The machines and tools are sold as is. The assembly and electrical connection of the machine/device must be carried out or checked by a qualified specialist. Deviations in technical data and errors in the description of the item may occur and are subject to change.

Condition: refurbished (used), functionality: fully functional, Year of construction: 2023, input voltage: 400 V, broaching length: 1,000 mm, number of broaching positions: 1, broaching speed: 3 m/min, Manufacturer: Rausch (Haan/ Rhld) Model: RS 4/1000 Machine No.: 5027 Year of manufacture: 2001/2023 Weight: 580 kg Overhauled: 3/2023 by Wiemers AG General / Technical Data: Unused, overhauled mechanical vertical broaching machine Rausch RS 4, with current “CE” certification Pulling force: 40 kN (4,000 kg) Broaching speeds: 3 m/min and 6 m/min Bdsdpfx Amsw H Dgnjreh Return speed: 6 m/min Maximum stroke: 1,000 mm Maximum tool length: 1,200 mm Table dimensions / Working area: 540 x 340 mm / 450 x 250 mm Table opening: Ø 90 mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (H x W x D): 2,350 mm x 900 mm x 1,000 mm (with splash-guard cabin) Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Accessories / Special equipment: - Drive with 2 speeds - Safety door with interlock and chip chute - Chip chute with tool storage - Electric clamp jaw sensing (tool removal monitoring to prevent unintentional retraction of the drawbridge) - Integrated coolant system with solenoid valve (controlled via swing system) - Patented coolant/lubricant swiveling system - Externally adjustable tool length setting system (reproducible across multiple machines) - 4 central lubrication points for the trapezoidal spindle drive - Closed centering plate for profile tools with additional protection plate for flat broaching tools (keyway tools) - 3-sided enclosed splash guard cabin with tool storage (ideal for profile broaching) - External control panel (connected via Harting plug connector) Remarks: The machine has been completely overhauled, the machine body thoroughly reconditioned. The following wear parts have been replaced: - New trapezoidal spindles and spindle nuts made from cast, wear-resistant bronze - All bearings and seals replaced The coolant system (pump, check valve, and drain valve) including coolant/lubricant swing system is new - Coolant supply is controlled via a solenoid valve, which can be switched over by the swing system - The drawbridge as well as the clamping jaws and rack segments are new - A deactivatable clamping jaw detection system has been installed (additional safety for operator & to prevent tool breakage) - A safety door with interlock, signal display, and door lock - The tool length adjustment system has been relocated outside the machine compartment - Additional end-position limit switches have been installed - Complete new electrical system (control cabinet) - No PLC installed, machine is electrically maintenance-friendly - New drive motor (SEW Germany) with brake - The machine has been freshly painted with 2-component structural paint General The dual spindle drive ensures smooth, centralized pulling force and consistent broaching speed (broaching speed selectable: 3 m/min or 6 m/min). By design, the machine is quick and simple to set up for broaching with flat broaching tools for keyway cutting. Thanks to the universally constructed design of the drawbridge and machine table, operation with both profile and flat broaching tools is possible without the need for additional drawheads.

Year of construction: 1992, condition: good (used), machine/vehicle number: 662681751, Broaching Machine - Vertical Manufacturer: Rausch Type: RS6 / 1300 Machine number: 662681751 Bodpfefc T Edsx Amrjdh Year of manufacturing: 1992 Type of current: 3N ~ 380 Volt/50 Hz Connected value: 7,1 KW Ampacity: 17 Ampere Weight: 810 kg Circuit diagram number: RS6 – 39 With aggregate Size table: 520mm x 320mm

Year of construction: 1978, condition: good (used), machine/vehicle number: 6006/478, Broaching Machine - Vertical Manufacturer: Rausch Type: RS8/1300 Year of manufacturing: 1978 Force: 8 Tons Stroke: 1.300 mm Bedpsfc T E Aofx Amrsdh Weight: 0,92 Tons

Condition: refurbished (used), functionality: fully functional, Year of construction: 1987, machine/vehicle number: 60213/674, input voltage: 380 V, input current: 15 A, input frequency: 50 Hz, broaching length: 1,000 mm, number of broaching positions: 1, -WAG 893- For sale is a Rausch RS6/1000 internal demolition machine. Manufacturer: Rausch Bjdpjzvwlyefx Amrjdh Type: RS6/1000 Year of manufacture: 10/1987 Machine no.: 60213/674 Weight: approx. 800 kg Tractive force: 60 kN Further information will be added shortly...

Condition: refurbished (used), functionality: fully functional, Year of construction: 2024, broaching length: 1,000 mm, number of broaching positions: 1, broaching speed: 3 m/min, Manufacturer: Rausch (Haan/Rhld) Model: RS 6/1000 Machine No.: 51261 Year of Manufacture: 1978 Weight: 680 kg Overhauled: 11/2024 by Wiemers AG General Information / Technical Data: Overhauled mechanical vertical broaching machine Rausch RS 6 G Pulling force: 60 kN Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Maximum stroke: 1000 mm Maximum tool length: 1200 mm Bdsdpfx Ajw Ighiomrsh Table dimensions / Working area: 610 x 470 mm / 520 x 320 mm Table aperture: Ø90 mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (H x W x D): 2,250 mm x 850 mm x 1,200 mm (H = table height from floor, without attachments) Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Additional modifications/upgrades to the original machine performed: - External stroke adjustment - New, machine-independent, reproducible tool length adjustment system - Additional limit switches for end position monitoring - Safety door with monitoring (integrated in the emergency circuit) - Machine enclosure below safety door with chip protection and tool storage area - Electrical sensing of clamping jaws (tool removal monitoring to prevent unintended retraction of the broaching bridge) - Coolant swing system with solenoid valve operated during swing motion (for switching on coolant before broaching stroke – optical flow control ensures lubrication, no dry cutting!) - Routing of electrical cables in protective steel conduits - Heavy-duty control cabinet mounting for machine components - Additional oil-proof drip tray on the control cabinet - Three-sided closed splash guard cabin (W = 960 x D = 450 x H = 590 mm) - Reinforced chip screen with magnetic separator - Control panel made of stainless steel with durable labeling - 4 central lubrication points for trapezoidal spindle drive Remarks: The machine has been completely overhauled, the machine body fully refurbished. All wear parts have been replaced. - New trapezoidal spindles and spindle nuts made from cast wear-resistant bronze - All bearings and seals renewed - The coolant system (pump, solenoid valve, and drain tap), including the coolant/lubrication swing system, is new - The clamping jaws are new - Complete electrical system (control cabinet) is new - All sheet metal and enclosures are new - The following components have been overhauled and re-used: - Machine base - Machine column - Machine table with table insert - Broaching bridge (clamping jaws new) - Gear wheels - Electric motor (new brake, new bearings) The machine is stored in our warehouse and can be inspected under power. The attached images are original photos of the machine. The machine is CE marked. The CE marking corresponds to the status as of 1998 (first overhaul).

Condition: ready for operation (used), Pulling machine RAUSCH RS 6-1300 with extensive accessories -Ram stroke / pulling length 1300mm -Pulling force 6000kg -Incl. 38x clearing pins -Incl. 95x guide bushings -Work bench -Setting plates -Crane -Platform -2x tool cabinets Bedpfx Ajza U Aljmredh Dimensions: L x W x H 1.6 x 1.7 x 2.3 meters / Weight: 2500kg Errors and omissions excepted.

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: 60305, General / technical data: Manufacturer: Rausch Type: RS6 / 1000 Year of manufacture: 07/2000 Machine-No.: 60305 weight: approx. 750kg Tractive force: 60kN (80kN) clearing speed: 4m/min return speed: 8m/min max. stroke: 1000mm maximum tool length: 1200mm maximum workpiece diameter: Ø approx. 900mm table opening: Ø 90mm for standard broaching mandrels Dimensions (h x w x d): 1600mm x 850mm x 1000mm (h=table height to floor without superstructure). type of power: 400 Volt / 50Hz - 6 / 7,5kW Accessories/ optional equipment: - electrical scanning of the clamping jaws (tool removal control to prevent against unintentional retraction of the drawbridge) Bedpfxeiqkb Ro Amredh - integrated coolant system with check valve and drain cock - patented coolant/lubricant swivel system (retrofitted) Remark: The machine has the manufacturer CE marking. The machine is under power in our warehouse and can be inspected.

Year of construction: 1985, condition: good (used), machine/vehicle number: 20236, Pulling-force: 10 to Stroke: 1500 mm Bdjdpfx Amobrcmrjroh 1 Broaching Station Weight: ca. 1800 kg Power-Input: 9,5 kw/380V With part and chip-convejor (mechanical)

Condition: used, Year of construction: 2013, General technical data: Machine type: Flexographic printing press Web width: 530 mm Number of colors: 10 Equipment & Configuration: • 1-side tape cleaner • 1-side corona treatment • Turning bar • Delam/Relam unit – 1 color • Cold foil unit – 1 • Die-cut station – 1 • Master gap unit – 1 Bdjdpeyplyaefx Amrsh • Rewind shaft – 1 • 10 UV GEW lamps • 3 sets of sleeves • 10 anilox rollers • 3 magnetic cylinders

Condition: excellent (used), Year of construction: 2019, Counter: 1,200,000 units Cycle counter: 8,297,167 cycles Hour counter: 5,281 hours Equipment / Additional information: Machine consists of: 1 x Main feeder 1 x Opener 4 x Insert stations 1 x Wrapping system (10,000 cycles per hour) with side sealing 1 x CROSS STACKER RIMA Bdjdsz A Dmhepfx Amrjh 1 x Friction feeder 1 x Mosca inline coating unit 1 x 90° curve Options: 1 x Videojet BX 6500 ( 2019 ) TECHNICAL DATA Product infeed: manual as standalone/automatic in line Film: centre-folded and flat film, e.g. PE, PO, PP, bio films, recycled content films Output: max. 10,000 cycles/h Passage width: 10–450 mm Passage height: max. 200 mm Product length: min. 80 mm Film width: max. 1,000 mm (flat film) Film roll diameter: max. 350 mm Control system: Siemens Sinamics D Display: Siemens 9" TP 900 touchscreen Electrical design: in accordance with VDE guidelines Working height: adjustable from 850–950 mm

Condition: like new (used), functionality: fully functional, Year of construction: 2025, overall weight: 370 kg, power: 3.5 kW (4.76 HP), input voltage: 400 V, input frequency: 50 Hz, broaching length: 800 mm, broaching speed: 3 m/min, total length: 920 mm, total width: 800 mm, total height: 1,950 mm, Manufacturer: Rausch (Haan/ Rhld) Model: RS 3 G/800 Machine No.: 2968/424 Year of manufacture: 1970 Weight: 370kg Overhaul: 8/2025 by Wiemers AG Our Ref. / Machine No.: WAG 787 General / Technical Data: Unused, overhauled mechanical vertical broaching machine by Rausch Pulling force: 3,000kg (30kN) Broaching speeds: 3m/min and 6m/min Return speed: 3m/min Maximum stroke: 800mm Maximum tool length: 1,000mm Table size / working surface: 340mm x 220mm / 430mm x 310mm Table opening: Ø 90mm for standard broaching mandrels Workpiece diameter: unlimited (without spray guard cabin) Dimensions (h x w x d): 1,950mm x 820mm x 900mm (h = table height from floor without attachments) Motor: 3.5kW Power supply: 400 Volt / 50 Hz Accessories / Special Features: - Modified drive system with geared motor and toothed belt drive - 2 broaching speeds: 3m/min & 6m/min - External stroke adjustment, cross-machine reproducible tool length adjustment system - Integrated coolant unit with check valve and drain cock, including selector switch for automatic operation (does not automatically switch in swivel mode) - Patented coolant/lubricant swivel system - Three-sided enclosed, front-open spray guard cabin (no external operator panel) - Machine enclosure below the safety door with chip guard and tool storage area - Electrical cabling within steel protective conduits - Electrical jaw monitoring (tool removal control to prevent unintended retraction of the pull bridge) - Safety door with integrated emergency stop function - Control panel made from stainless steel sheet with permanent marking - 4 central lubrication points for the trapezoidal spindle drive - Machine documentation Remarks: The machine is fully overhauled, with the frame completely refurbished. The following wear parts have been replaced: - New trapezoidal spindles and spindle nuts made from cast wear-resistant bronze - All bearings and seals replaced - Central drive shaft is new - Coolant system (pump, check valve and drain cock), including coolant/lubricant swivel system, is new - Jaws are new (pull bridge additionally reinforced) - A switchable jaw monitoring system has been installed (additional safety for operators and to prevent tool breakage) Bjdpsytvyxjfx Amrsdh - A safety door with interlock has been installed instead of the rubber reach-in protection - Tool length adjustment system relocated outside the machine compartment - Additional limit switches installed - Complete electrical system (control cabinet) with Siemens components is new - Control panel made of stainless steel with durable labeling - New geared drive motor (SEW) with toothed belt drive - Machine has been repainted with 2-component structural paint The machine is stored at our warehouse and can be inspected under power.

Condition: good (used), Year of construction: 2004, functionality: fully functional, power: 22 kW (29.91 HP), Item No. 5.4-783 1 used automatic band saw Kasto KASTO HBA A10x12, year of manufacture 2004 Roller conveyor Chip conveyor Bdodpfx Ajz Ehryemreh Coolant system Technical data: Cutting range (round) 300-1260 mm Cutting range (square) 1060x1060 mm Cutting speed (variable) 12-90 m/min Saw band dimensions 11430x80x1.6 mm Total drive power 20 kW Machine weight (approx.) 15500 kg Technical data, accessories and machine description are non-binding.

Condition: refurbished (used), functionality: fully functional, Year of construction: 1968, machine/vehicle number: 51039/373, Rausch RS 6G (WAG 855) Vertical Internal Broaching Machine Manufacturer: Rausch (Haan/Rhineland) Model: RS 6G / 1000 Machine No.: 51039/373 Year of manufacture: 1968 Weight: 800 kg Revision: December 2024 by Wiemers AG General / Technical Specifications: Completely overhauled, mechanical vertical broaching machine Rausch RS 6G, unused with "CE" marking Tensile force: 60 kN (6,000 kg) Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Max. stroke: 1000 mm Max. tool length: 1200 mm Table dimensions / work surface: 610 x 470 mm / 520 x 320 mm Table opening: Ø 90mm for standard broaching mandrels Workpiece diameter: any Dimensions (h x w x d): 1600mm x 850mm x 1000mm (h = table height to floor without attachments) Motor power: 4.4kW / 5.5kW Power supply: 400V / 50Hz Features: - Geared motor drive with 2 working speeds - Reinforced drawbridge made of tool steel for greater pulling forces - Safety door with automatic door locking and safety interlock - New chip chute with tool storage option - Protective cover for the stroke adjustment - Oil-tight storage on the control cabinet - Electrical scanning of the clamping jaws (tool removal control to prevent unintentional retraction of the drawbridge, providing additional safety for the operator and tools) - Integrated coolant system with electrically switched solenoid valve and drain cock - Coolant swivel system, with automatic coolant switching via the swivel system - Chip sieve with magnet - Externally adjustable tool length adjustment system (reproducible across all machines) - Stainless steel control panel with durable markings - 4 central lubrication points for the trapezoidal spindle drive with manual grease gun Bjdpfx Asv Rmvzomredh Note: The machine has been completely overhauled. During the overhaul, the machine base, machine body, and machine table were completely reconditioned. All wear parts have been replaced. The machine has been updated to the state of the art and complies with current CE regulations. The machine is marked with a CE certificate. General The double spindle drive ensures a smooth and central pull point and a constant broaching speed (broaching speed optionally at 3 m/min or 6 m/min). Due to its design, the machine can be quickly and easily set up for broaching with flat broaching tools for keyways. The universal design of the drawbar and machine table allows broaching with profile and flat broaching tools without the use of additional drawing heads. Broaching tools and broaching mandrels suitable for the machine are available on request.

Condition: good (used), Year of construction: 1982, number of straightening rollers: 13, straightening roller diameter: 145 mm, Year of construction / YOM: 1982/2024 Sheet width: 2000 mm Sheet thickness - max.: 10 mm Sheet thickness - min.: 3 mm Number of straightening rollers: 13 rollers Straightening roller diameter: 145 mm Straightening speed: 16 m/min Bundle length: 2330 mm Center distance between straightening rollers: 150 mm Support roller diameter: 290 mm Main drive motor: 30 kW Bodoz Hcbrspfx Amredh Weight: 32 t Additional information: - Number of support rollers: 21/24 - Number of supports (top/bottom): 3 /3 - Traverse lift speed: 0.71 mm/sec - Traverse lift stroke: -18 mm to +42 mm - Max. tilting of lower traverse: 8 mm

Condition: used, Year of construction: 1983, Hydraulic Shear HACO HS 3010 Capacity: 3000 x 10 mm Back gear gauge travel: 1000 mm Year of construction: 1983 Manual adjustment of the clearance between blades Cutting angle: 1° to 3° Bsdpfx Aszwcncjmrjdh Voltage: 380 V Dimensions (L x W x H): 4000 x 2100 x 2200 mm Weight: approx 8 T

Condition: excellent (used), Technical data: Max. cutting width: 3100 mm Max. cutting capacity (steel ST45): 0.4 - 10 mm Motorized adjustable backgauge: 1000 mm NC control: OPERATOR Bdodpfx Aoyxvgqomrjh Stroke: 160 mm Motor power: 15 kW CE marking Dimensions (L x W x H): approx. 3900 x 2200 x 2250 mm Weight: approx. 9 tons The seller accepts no liability for typographical or data transmission errors. The machine's visual condition, technical functionality, and wear are consistent with its age; used machines are sold without any warranty.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 56,089 h, Swing diameter over bed/cross slide: 820mm/550mm, distance between centers: 2666mm, max. turning diameter: 610mm, max. workpiece length: 2500mm, travel X/Z: 410mm/2560mm, travel Y: -80mm/100mm, max. workpiece weight without/with tailstock: 500kg/1500kg, tool positions: 12, rapid traverse X/Z/Y: 24m/30m/12m/min, feed force X/Z/Y: 17kN/20kN/17kN. Machine dimensions X/Y/Z: approx. 5500mm/2250mm/2550mm, weight: approx. 15000kg, operating hours: approx. 56089. Documentation available. An on-site inspection is possible. Expected to be available from mid-2026. Bsdew Dfhuopfx Amrodh

Condition: like new (used), Year of construction: 1988, 🛠️ 4-Axis CNC Portal Milling Machine WALDRICH COBURG Type 17 – 10 FP A powerful 4-axis CNC portal milling machine from WALDRICH COBURG is offered for sale, ideally suited for machining large and heavy workpieces. Bedpfxedu Hg He Amredh The machine impresses with its robust construction, high performance, and extensive equipment. It also offers excellent potential for modernization / CNC retrofit tailored to customer requirements. ⚠️ Important Note The machine is offered without electrical equipment and without CNC control and is therefore perfectly suited as a retrofit project. ⚙️ Highlights ✅ 4-axis CNC portal milling machine with adjustable cross rail ✅ Powerful main drive: 75 kW ✅ Speed range up to 2,000 rpm with high torque ✅ Automatic pallet changer (3 pallets) ✅ Hydrostatic guideways in X & Y axes ✅ Through-spindle coolant system ✅ Ideal for heavy-duty machining & large components 📊 Technical Data 🔹 Distance between columns: 3,100 mm 🔹 Pallet clamping surface: 2,750 x 4,000 mm (extendable) 🔹 Number of pallets: 3 (automatic) 🔹 Max. workpiece weight per pallet: 40 t 🔹 X-axis travel: 5,000 mm 🔹 Y-axis travel: 5,440 mm 🔹 Z-axis travel: 1,000 mm 🔹 W-axis travel (cross rail): 2,500 mm 🔹 Spindle power: 75 kW 🧰 Equipment ✔️ Automatic pallet changer (3 stations) ✔️ Angle heads (RAA) incl. ISO 60 & ISO 50 ✔️ Special angle head ✔️ Spindle extension (650 mm) ✔️ Automatic head changing system 📍 Location Germany 👁️ Inspection Inspection possible at any time by appointment 📦 Availability Available at short notice 📩 Contact Contact us now for further information, photos, or a customized offer!

Year of construction: 2017, condition: used, Maximum placement speed: 16,000 components/hour IPC net placement speed: 13,800 components/hour Placement system: HYDRA Tools: 8 Max. component dimensions (X/Y/Z): 56 / 56 / 15 mm Max. component weight: 140 g Min. PCB size (X/Y): 70 / 50 mm Max. PCB size with T3 (X/Y): 443 / 508 mm Min./max. PCB thickness: 0.4 / 6 mm Max. PCB weight with T3: 5 kg Feeder capacity with T3: 112 × 8 mm feeder positions Conveyor height range: 880–975 mm Operating hours: approx. 7000 h Placement time: approx. 3000 Bdodpezzlq Ujfx Amreh

Condition: used, Year of construction: 1989, MAKE GER, MADE IN SPAIN MODEL RS 10/60 YEAR TABLE LENGTH 1300.0 mm TABLE WIDTH 600.0 mm TRAVEL X AXIS: 1600.0 mm Y AXIS: 600.0 mm MAX DISTANCE (TABLE TO WHEEL) 800.0 mm MAX WORKPIECIE WEIGHT 1000 KGS GRINDING WHEEL SIZE 400.0 x 100.0 x 127.0 mm Bdedpfxsy Du N Us Amroh SPINDLE SPEED MAX 1500 RPM MACHINE DIMENSIONS 4600.0 x 2700 x 2600.0 mm MACHINE WEIGHT 7600 KGS PLUS ELECTROMAGNETIC CHUCK SIZE: 1000.0 X 600.0MM HYDRAULIC PACK COOLANT SYSTEM WHEEL MOUNTED DRESSER

Condition: used, Year of construction: 2015, Technical details: table length: 3000 mm table width: 1500 mm burner heads: 1 X-axis : 3000 mm y-axis: 1500 mm z-axis: 150 mm max. plate thickness : 20 mm Bdjdszlic Nspfx Amroh weight of the machine ca.: 10 t 1 used CNC laser cutting system PRIMA POWER PLATINO FIBER Switching hours as of June 2024: 65,043 h Incl. - FIBERLASER power source IPG YLS4000 incl. chiller - Incl. STIMA automatic loading and unloading device for raw material and processed sheets for 2D laser machines Compat Server (compact tower) Manufacturer description: The Platino Fiber laser cutting machine is a result of the perfect balance of innovation and experience. This product combines state-of-the-art efficient and ecological fiber laser technology with the proven reliability and flexibility of the Platino platform. The Platino Fiber can be used to cut a variety of materials. Fiber lasers are more effective than other laser sources at cutting highly reflective materials (e.g. aluminum alloys, copper, brass). The Platino Fiber cuts various thicknesses, up to 20 mm of mild steel, with efficiency and quality. The productivity increases are particularly noticeable with thin to medium-sized sheets. Compact servers: is a loading and unloading device for handling blanks and processed sheets. Compact Server consists of two storage units - one for blanks and one for processed sheets. All components of the Compact Server are located above the automatic pallet changer and therefore require no additional floor space. The advantages of these solutions are: reliability, compactness and easy management of loading/unloading operations. The newest product from SPR Italy is a highly sophisticated automation system that combines many innovative solutions that are subject to SPR patents. The system is capable of unmanned operation and provides storage, loading and unloading within the smallest footprint possible. The tower is built above the shuttle table and the loading and unloading is done with the elevator that can be installed on either side of the tower. Simple operation and state of the art PLC contribute to a friendly integration and provide real productivity gain. The system is so compact that it became the top selling automation product, with many hundred of them sold world wide in just few years since it was launched. Compact Tower CT 1530 is capable to store a maximum of 54 ton of raw sheets dim. 1500x3000mm stacked in18 locations, with 80mm each stack, and to load raw sheets onto the machine table and unload processed sheets thereafter. For this example we will use a 18 pallet tower such as we already installed in Melbourne this year. The scope of the work includes the software implementation, the tests of the units at SPR factory, shipment, documentation and supervision during installation, start-up and commissioning Concrete foundation to the engineering specifications, civil works, mains electrical supply, permits and the base plates must be supplied by Customer. Major components The Compact Tower is composed with following main units: - tower to store the stack of sheet - elevator to move the pallet on which the stack of sheet is laid - table with fixed pins where the operator load the stack of sheet - gripper with suction cups - light barriers - electric cabinet with control panel - set of safety fences General features: Sheet format max. 3.100×1.570mm Max weight 3.000Kg per stack Max height stack

Condition: used, Year of construction: 2015, Technical details: table length: 3000 mm table width: 1500 mm burner heads: 1 X-axis : 3000 mm y-axis: 1500 mm z-axis: 150 mm max. plate thickness : 20 mm weight of the machine ca.: 10 t 1 used CNC laser cutting system PRIMA POWER PLATINO FIBER Switching hours as of June 2024: 65,043 h Incl. - FIBERLASER power source IPG YLS4000 incl. chiller - Incl. STIMA automatic loading and unloading device for raw material and processed sheets for 2D laser machines Compat Server (compact tower) Manufacturer description: The Platino Fiber laser cutting machine is a result of the perfect balance of innovation and experience. This product combines state-of-the-art efficient and ecological fiber laser technology with the proven reliability and flexibility of the Platino platform. The Platino Fiber can be used to cut a variety of materials. Bjdpfx Aezl D Exemredh Fiber lasers are more effective than other laser sources at cutting highly reflective materials (e.g. aluminum alloys, copper, brass). The Platino Fiber cuts various thicknesses, up to 20 mm of mild steel, with efficiency and quality. The productivity increases are particularly noticeable with thin to medium-sized sheets. Compact servers: is a loading and unloading device for handling blanks and processed sheets. Compact Server consists of two storage units - one for blanks and one for processed sheets. All components of the Compact Server are located above the automatic pallet changer and therefore require no additional floor space. The advantages of these solutions are: reliability, compactness and easy management of loading/unloading operations. The newest product from SPR Italy is a highly sophisticated automation system that combines many innovative solutions that are subject to SPR patents. The system is capable of unmanned operation and provides storage, loading and unloading within the smallest footprint possible. The tower is built above the shuttle table and the loading and unloading is done with the elevator that can be installed on either side of the tower. Simple operation and state of the art PLC contribute to a friendly integration and provide real productivity gain. The system is so compact that it became the top selling automation product, with many hundred of them sold world wide in just few years since it was launched. Compact Tower CT 1530 is capable to store a maximum of 54 ton of raw sheets dim. 1500x3000mm stacked in18 locations, with 80mm each stack, and to load raw sheets onto the machine table and unload processed sheets thereafter. For this example we will use a 18 pallet tower such as we already installed in Melbourne this year. The scope of the work includes the software implementation, the tests of the units at SPR factory, shipment, documentation and supervision during installation, start-up and commissioning Concrete foundation to the engineering specifications, civil works, mains electrical supply, permits and the base plates must be supplied by Customer. Major components The Compact Tower is composed with following main units: - tower to store the stack of sheet - elevator to move the pallet on which the stack of sheet is laid - table with fixed pins where the operator load the stack of sheet - gripper with suction cups - light barriers - electric cabinet with control panel - set of safety fences General features: Sheet format max. 3.100×1.570mm Max weight 3.000Kg per stack Max height stack