Used Perkin Elmer Dsc 8000, N5340524 for sale (1,737)

Condition: used, Perkin Elmer Instruments Differential Scanning Calorimeter with Cooling, DSC 8000, N5340524 Model: DSC8000 Type: N5340524 Condition: Used General: Dual-furnace differential scanning calorimeter with power compensation, Perkin Elmer DSC 8000, equipped with Intracooler 2. Enables precise heat flow measurements from approx. –70 °C to 750 °C with high sensitivity and rapid thermal response. General Instrument Specifications DSC Type: Dual furnace design (independent sample and reference furnaces) Measurement Principle: Power compensation Furnace Material: 90% platinum alloy Temperature Sensors: Distributed platinum resistance thermometers Temperature Performance Standard temperature range: approx. –180 °C to 750 °C (with suitable cooling accessories) With Intracooler 2: approx. –70 °C to 750 °C Minimum Temperature (Intracooler 2): approx. –80 °C Heating Rate: 0.01 to 300 °C/min Cooling Rate: 0.01 to 150 °C/min Measurement Performance Dynamic Range: ±800 mW (typical) High sensitivity and fast response due to low-mass furnace design Excellent baseline stability and temperature accuracy Gas and Atmosphere Control Two regulated gas lines with automatic switching Typical purge gases: nitrogen, helium, argon Supports high gas purity (up to 99.999%) Interfaces and Connections USB Ethernet (LAN) Gas inlet connections Connection for cooling unit Power supply connection Accessory ports (e.g., autosampler, high-pressure cell, UV/photocalorimeter module) Temperature calibration interface Technical Data 3.15 AMP T (5 x 20 mm) 250 V 100–240 VAC 50/60 Hz Maximum power consumption 400 VA Codpfsyluicsx Ailorh Accessories Cooling system: PolyScience Intracooler 2 Norgren gas pressure regulator with gauges for external gas supply Autosampler with 96 positions High-pressure DSC cells, UV/photocalorimeter accessories IEC power connection Documentation PolyScience Intracooler 2 Model: N5341746 P10N9E402E Voltage: 240 IP-100 Hz/A/Ph: 50/7.5/1 Refrigerant: 350 g R-404A Note on Item Condition: Without software/PC

Condition: used, This listing is for the Perkin Elmer Sciex Turbo Ion Spray Source The unit is in full working condition and is ready for immediate use What Is the PerkinElmer Sciex Turbo Ion Spray (Turbo V) Source? The Turbo V Ion Source (commonly referred to as Turbo Ion Spray Source) is a highly robust and efficient ionization module for LC‑MS/MS systems, originally developed by PerkinElmer and further advanced by SCIEX. Here's a breakdown of its key features and function: Ionization Modes Electrospray Ionization (ESI): Uses a TurboIonSpray® probe. High-voltage spray creates charged droplets, while two heated nitrogen gas jets—in an orthogonal configuration—enhance desolvation by intersecting the spray at ~90°, leading to efficient ion generation. Artisan Technology Group Crjdpexhfc Rsfx Aileh Atmospheric Pressure Chemical Ionization (APCI): Employs a different APCI probe. The sample is nebulized, vaporized via a heated ceramic tube, then ionized via a corona discharge near the orifice. Design and Performance Highlights Iconic orthogonal spray design with simplicity and durability. Uniform temperature distribution and optimized curtain gas flow contribute to its high ruggedness and low maintenance needs. Robustness & Productivity The design supports multi-day stability, with studies showing

Condition: used, This listing is for a Perkin Elmer Lambda 35 Spectrophotometer. The unit is in full working condition and is ready for immediate release. The PerkinElmer Lambda 35 UV/Vis Spectrophotometer offers the best solution for measurement on solids, pastes and powders. It supports Double-Beam Operation. Variable bandwidth is from 0.5 nm to 4 nm. LAMBDA systems are easy to operate and deliver results that you can trust,with minimal training for operators. Using LAMBDA system, it’s easy to develop simple, robust methods and make sure you follow them without making mistakes. And, no matter what LAMBDA system you choose, your daily UV/Vis analysis will be faster, simpler, and more reliable than ever. Wavelength range: 190-1100 nm Weight: 25 kg (57 lbs.) Wavelength absorbance range: 3 to 4 A Crjdpfxjxx Axwe Ailoh Wavelength accuracy: ±0.1 nm Stray light:

Condition: used, This listing is for a Perkin Elmer The Protome Works System Mass PREP Station Robotic Protein Handling System. Codpfxexzhucs Ailjrh

Year of construction: 2024, condition: like new (used), Compact Instrument for Automated Nucleic Acid Purification The Perkin Elmer Chemagic 360 is an automated benchtop system for isolating nucleic acids (DNA and RNA) from a wide variety of sample materials. Crjdsyk Uy Sjpfx Ailsh It utilizes Chemagen's magnetic bead technology to obtain high-purity nucleic acids for various downstream applications. With dimensions of only 80 x 80 cm and its unique sample volume flexibility, the Chemagic 360 is an innovative instrument that can be adapted to almost all your nucleic acid purification needs. Utilizing proven M-PVA magnetic bead technology, the Chemagic 360 delivers high yields of high-purity nucleic acids suitable for a wide range of downstream applications such as NGS, MLPA, genotyping, and PCR. ``` Features at a Glance • Optimized design to prevent cross-contamination • Sample volume from 10 µl to 10 ml • Throughput of 96 to 4000 samples per day • Compact design • Ultra-fast DNA purification protocols available • Flexible reagent dispensing to keep operating costs low • User-friendly interface enables quick and easy installation • Easy integration into liquid handling platforms Benefits at a Glance • DNA isolation directly from human whole blood or plasma samples: No primary sample pretreatment is required • Ready-to-use DNA with high yield and purity • Fast processing times: 96 samples in less than 60 minutes • Long DNA fragments: up to 200 kb, suitable for NGS • High recovery rates • Autonomous system with respect to downstream assays Specifications: Manufacturer: Perkin Elmer Type: Chemagic 360 Throughput: approximately 96 samples per run Sample capacity: 12, 24, and 96 Volume: 10 microns to 10 ml Extraction heads (chemagic rod heads): 96 Number of samples: 1–96 Sample volumes: 10 µl to 400 µl Tube plates: 96-well plates Extensive kit portfolio – whole blood, saliva, serum/plasma, etc. No cross-contamination Revolutionary, compact table design LCD monitor, keyboard, mouse Power supply: 100–240 V~ (AC), 50/60 Hz Size/Dimensions: 800 x 800 x 900 mm Weight: 140 kg Year of manufacture: 2024 Video link: Chemagic 360 Financing through our bank is also available. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Year of construction: 2024, condition: like new (used), PerkinElmer Chemagic 360-D Nucleic Acid Extraction System The PerkinElmer Chemagic 360-D is an automated benchtop system for isolating nucleic acids (DNA and RNA) from a variety of sample materials. It utilizes Chemagen's magnetic bead technology to obtain high-purity nucleic acids for various downstream applications. Key Features and Specifications Technology: The system is based on the patented Chemagen M-PVA magnetic bead technology. Metal rods are magnetized to collect the beads containing the bound nucleic acids and transfer them between different process solutions, minimizing cross-contamination. Sample Volume Flexibility: It offers various rod heads (magnetic rod heads) for different volume ranges and throughputs: 12-Rod Head: For sample volumes from 1 ml to 10 ml. 24-Rod Head: For sample volumes from 200 µl to 4 ml. 96-Rod Head: For sample volumes from 10 µl to 400 µl. Applications: The isolated nucleic acids are suitable for a wide range of applications, including next-generation sequencing (NGS), genotyping, PCR, and MLPA. Software: The intuitive Chemagic software enables easy protocol setup, process status tracking (runtime, remaining time), and the generation of LIMS-compatible protocol files for quality assurance. Accessories: An optional Chemagic Dispenser 360 is available for quick and accurate reagent pre-filling, thus reducing manual labor. Dimensions: The device measures 800 x 800 x 900 mm (L/W/H). Certification: The 360-D version is a CE-IVD registered and FDA-listed instrument intended for in vitro diagnostic use (in combination with the appropriate kits). ``` The advantages at a glance • DNA isolation directly from human whole blood or plasma samples: No pretreatment of primary samples is required before extraction • Ready-to-use DNA with high yield and purity • Fast processing times: 96 samples in less than 60 minutes • Long DNA fragments: up to 200 kb, suitable for NGS • High recovery rates • Autonomous system with respect to downstream assays Specifications: Manufacturer: Perkin Elmer Type: Chemagic 360-D Throughput: approximately 96 samples per run Sample capacity: 12, 24, and 96 Volume: 10 microns to 10 ml Extraction heads (Chemagic rod heads): 96 Number of samples: 1–96 Sample volumes: 10 µl to 400 µl Tube plates: 96-well plates Extensive kit portfolio – whole blood, saliva, serum/plasma, etc. No cross-contamination Revolutionary compact table design Computer workstation with Chemagic software LCD monitor, keyboard, mouse Power supply: 100–240 V~ (AC), 50/60 Hz Size/Dimensions: Width: 900 mm (1500 mm with display attached and door open) Depth: 820 mm (1000 mm with door open) Height: 900 mm Weight: 140 kg Year of manufacture: 2024 Video link: Chemagic 360-D Financing through our bank is also available. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request! Crodjyk Upmjpfx Ailoh

Condition: used, This listing is for the PerkinElmer Chemagic™ 360 – Automated Nucleic Acid Extraction System The unit is in full working condition and is ready for immediate use. Each unit is on heavy duty trolley with lockable castors The Perkin Elmer Chemagic™ 360 is a high-throughput, compact benchtop instrument designed for automated DNA and RNA extraction from a wide range of sample types, including blood, plasma, saliva, tissues, and FFPE samples. It uses chemagen’s proprietary M-PVA magnetic bead technology for the efficient and reliable purification of nucleic acids, delivering high yields with excellent purity. Key Features & Benefits Flexible Sample Volume: Processes volumes from 10 µL to 10 mL, supporting a variety of protocols and sample types. High Throughput: Handles up to 96 samples per run, ideal for biobanks, clinical labs, and research institutions. Large Kit Portion Compatibility: Supports processing of large-volume samples with high reagent capacity. Cross-Contamination Prevention: Engineered protocols and magnetic separation minimize the risk of sample-to-sample contamination. Mixed Sample Types: Able to process different sample materials in the same run, enhancing workflow efficiency. Integration Ready: Compatible with automated liquid handling platforms for streamlined workflows. Compact Footprint: Space-saving design with dimensions of 80 x 80 x 90 cm (L x W x H), suitable for constrained lab environments. Advanced Sample Handling: Offers convenient and improved sample management, reducing hands-on time. Barcode Scanning: Enables automated sample tracking and improves traceability throughout the process. LIMS Integration: Produces LIMS-compatible log files, supporting full data traceability and compliance. User-friendly Interface: Intuitive software for easy setup, protocol customization, and real-time monitoring. Technical Specifications Sample Capacity: 1–96 per run Sample Volume Range: 10 µL – 10 mL Processing Time: ~45 minutes for 400 µL whole blood Dimensions (L x W x H): 80 cm x 80 cm x 90 cm Crodpfx Aijxhgm Rsleh Weight: 140 kg Power Supply: 100–240 VAC, 50/60 Hz Ideal Applications Next-Generation Sequencing (NGS) PCR and qPCR Genotyping and MLPA Clinical Diagnostics Biobank Sample Preparation

Year of construction: 2022, condition: used, Spectrometer for sale, complete set. Excellent condition. The device has not been used and has been serviced. In operation since 2022. Cjdpeyw Rflofx Ailjrh

Condition: used, Year of construction: 2004, operating hours: 34,124 h, This BATTENFELD HM 8000 / 4500 + 4500 BM will be auctioned off online as part of our industrial auction / machine auction, which involves the liquidation of the inventory of a well-known toy manufacturer – injection molding machines, storage equipment, and logistics accessories – STEP 3. Cjdpfx Aez H Sixeilorh You can find this and many other items on our platform.

Condition: good (used), Duplo DSC-10/20 + DBM-150 + DBM-150T Booklet Making Line Cjdpfxszw T Dho Ailjrh This machine is in very good condition and is the latest booklet making system from Duplo. Made in Japan, 2018. Controlled via a control panel. The line consists of: – DSC-10/20 collator – vacuum feeding – LUL-HM manual feeder connector – DBM-150 stitching and folding unit – stitching and folding in one unit – DBM-150T front trimmer – Long outfeed table – Built-in stacker for stacking sheets. The machine includes documentation, small parts, etc.

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, temperature: 35 °C, operating pressure: 75 bar, energy consumption: 64 kWh, Industrial plant for the treatment and concentration of process water as well as for nutrient recovery. The plant combines a double-pass reverse osmosis (RO) system with a thermal evaporator unit and was originally developed for biogas production to recover ammonium-containing fertilizer from process water and digestate. The plant was never commissioned due to the operator's insolvency and is in a preserved condition. Csdpfx Aisyr H Anelsrh The system is suitable for operators from the industrial, environmental technology, or agricultural sectors who are looking for a rapidly available solution for water treatment, ZLD (Zero Liquid Discharge), or nutrient recovery. Technical data System type: RO Double Pass + Evaporator Model: SIMPEC RO Double Pass 8000 44 8 Evaporator 57 000 Year of construction: 2020 Permeate output: Stage 1: 7.5 m³/h Stage 2: 6.7 m³/h Permeate quality:

Condition: good (used), Bacciottini Pit Stop DG LINE 8000 Automatic Creasing Machine Fully operational and ready to use. This is the most efficient creasing and perforating system on the market, featuring a robust design. Made in Italy. Non-stop vacuum feeding with the ability to add material during operation. Built-in compressor. The set includes creasing and perforating tools. Technical data: Csdpfx Aiozt H Raelsrh Maximum sheet size: 500 x 700 mm Min. sheet size: 80 x 100 mm Maximum speed (for A4 format): 8000 sheets/h Material weight: 80-400 GSM Maximum number of creases per sheet: 20 Gap distance: 0.1 mm Setting accuracy: 0.1 mm Power supply: 230 V Power consumption: 2 kW Weight: 180 kg Dimensions: 1500 x 750 x 1200 mm

Condition: used, Year of construction: 2003, functionality: fully functional, type of input current: three-phase, overall weight: 620 kg, filter area: 60 m², suction capacity: 5,000 m³/h, negative pressure: 2,500 Pa, Dust extraction unit, fume extraction unit for welding, self-cleaning cartridge filter, pneumatic, vacuum-based system for plasma cutting, laser cutting, sandblasting, soda blasting, shot blasting, and for all types of dry dust. Kemper System 8000 The filter is pneumatically cleaned with pulses of compressed air during operation, ensuring high device efficiency. The fan is located on the clean air side, minimizing the risk of explosion. Year of manufacture: 2003 Fans with a power of 5.5 kW. Flow rate: 5000 m3/h Vacuum: 2500 Pa Credpozil Ivsfx Aileh Filtration area: 60 m2 Stock number: 1147

Condition: used, Year of construction: 2002, Control Heidenhain x-travel 7.300 mm y-travel 1.500 mm z-travel 2.000 mm spindle tunring speed 4.000 U/min tool taper SK 50 number of tool places 40 Pos. Zustand: gebraucht Verfügbar: ab März 2027 Die Maschine ist unter Strom vorführbereit. Technische Merkmale & Zubehör: - Schaltschrank neu verkabelt - Orthogonal-Indexier-Fräskopf, 1° + 2,5° - Späneförderer - Kühlmittelanlage - Plattenfeld Crsdpfx Aijz Ic Alsloh Zubehör, abgebildete Werkzeuge und Spannmittel gehören nur zum Lieferumfang wenn dies in den Zusatzinformationen vermerkt ist. Aenderungen und Irrtuemer in den technischen Daten und Angaben sowie Zwischenverkauf vorbehalten!

Condition: good (used), Year of construction: 2020, functionality: fully functional, operating hours: 5,800 h, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,100 mm, workpiece height (max.): 1,400 mm, workpiece weight (max.): 2,000 kg, controller manufacturer: Siemens, controller model: 840D SL, torque: 1,146 Nm, rotational speed (max.): 8,000 rpm, Machine name / type: HELLER / H 8000 Operating hours: 5800 Year of construction: 2020 Control unit: Siemens 840D SL Spindle: EPC-Unit (8.000 1/min, 60 kW, 1146 Nm) Tool clamping system: HSK 100 Tool magazine / places: Chain / 100 Crsdpfxju Urgbe Ailsh Rotary table: 360.000° X 0,001° Coolant unit: KNOLL, KF 600, IKZ 70 bar, (work area flushing) Positioning range XYZ (mm): 1250 / 1200 / 1100 Pallet size (mm): 800 X 800 Workpiece clamping: mechanical Additonal options / Specifics: multi-spindle-head support (MSK); receiver for measuring probe (RENISHAW); fast drill fracture sensing (SBBK); interface exhaust system; screen blow-off device for operator door; codechip; Chip conveyor function check; Integrated process monitoring (IPM) + Monitoring function to minimize machine damage in case of collision; 3 colour status lamp; increased tool weight 35kg; scraping conveyor for wet machining; Coolant temperature control; Feed force display; Tangential control;

Condition: used, all stainless steel suitable for thermal oil heating Crjdjz Hkhtjpfx Ailoh nett belt length 7.000 mm nett belt width 700 mm adjustable speed infeed conveyor outfeed conveyor sediment removal system filter mechanical hoists overall dimensions (l x w x h) : ± 12.500 x 2.400 x 3.900 mm thermic heating power 254 kw

Condition: excellent (used), Year of construction: 2014, Technical data: Working length: 8050 mm Press force: 300 tons NC control: DELEM with Cybtouch 15 Codpsz Abn Ssfx Ailjrh Controlled axes: Y1/Y2; X1/X2 Stroke: 300 mm Distance between table and punch: 500 mm Overhang: 300 mm Table height: 875 mm Motor power: 26 kW CE marking In-floor machine Weight: approx. 45.5 tons Accessories: Various tools 6 support arms Laser monitoring Condition: Overall, very good condition The seller is not liable for typing or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 6411, clamping force: 8,000 kN, "IMV Presse HPF-AZ80 Hydraulic Injection Molding Press 800ton with overhead hydraulic tank and robot loading system. Crodpfjzhugxsx Aileh

Condition: used, Year of construction: 2008, machine/vehicle number: AH005185, functionality: fully functional, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, actuation type: pneumatic, overall weight: 5,500 kg, Equipment: CE marking, We are selling a very well-maintained STEFANI SOLUTION 8000 edge banding machine. Year of manufacture: 2008 Machine length: 11,000 mm Edge band thickness: 0.5 - 16 mm Workpiece thickness: 10 - 60 mm Minimum workpiece width: 260 mm Maximum speed: 25 m/min (without using saws) Units: - Separating agent applicator - Pre-milling unit - Gluing unit - Saws - Trimming units - Buffing units - Brushes - Saw for creating grooves on the surface and along the edge. The machine is in operational condition. Codszdlabjpfx Ailsrh For additional information, please call.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 5000014, Year of construction: 2008, operating hours: 1,813 h, motor manufacturer: Perkins, tire condition: 80 %, empty load weight: 4,700 kg, Equipment: cabin, MAFI MTD55 4x4 – ONLY 1,813 hours – Perkins – HUSS filter – industrial tractor For sale: MAFI MTD55 4x4 industrial tractor in very good technical condition, with low operating hours – only 1,813 engine hours. This machine is ideal for work in production plants, warehouses, ports, and internal logistics operations. Technical data: Year of manufacture: 2008 Drive: 4x4 Engine: Perkins (diesel) Power: 74.5 kW Operating hours: 1,813 h Unladen weight: 4,700 kg Drawbar pull: up to 35 kN Codpsy Aupfefx Ailerh Equipment: Enclosed cab HUSS exhaust filtration system (permitting indoor use) Transport/industrial hitch Simple, robust construction (low failure rate) The machine is fully functional, ready for operation (after mechanical inspection). The engine runs smoothly and there are no issues with the drive system. Visual condition is good, with typical signs of use (as seen in the photos). Very low hours for this type of equipment. The machine is available for on-site inspection and testing. Transport can be arranged.

Condition: used, all stainless steel with top hold down belt water circulation net belt length 8.000 mm net belt width 900 mm adjustable speed lifting unit with electrical hoists dimensions (l x w x h): ± 9.000 x 1.800 x 3.850 mm Crsdpfxsz Eilbo Ailoh

Condition: used, all stainless steel electrically heated 386 kW with lower and upper belt Crodjz D Aqzjpfx Aileh frying length 8.000 mm belt width 630 mm adjustable speed oil circulation pump suitable for fire protection sediment removal system electrical hoists overall dimensions (l x w x h) : ± 11.550 x 1.700 x 2.900 mm

Condition: used, suitable for thermic oil heating (180 kW) Maximum baking temperature 220-250 °C adjustable temperature adjustable speed Minimum cooking time: 4 min Maximum cooking time: 60 min belt width 600 mm canopy with electric hoists Crjdpfez Az Duox Aileh suitable for steam injection (to heat up and to improve product yields) 400V-50 Hz-42A dimensions (l x w x h) : ± 10.000 x 2.000 x 2.700 mm

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 18,000 rpm, travel distance X-axis: 1,020 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 805 mm, controller manufacturer: FANUC, controller model: 31i-b5, spindle motor power: 22,000 W, table load: 800 kg, number of slots in tool magazine: 40, number of axes: 5, This 5-axis DN SOLUTIONS DVF 8000 was manufactured in 2022. It features impressive X-axis travel of 1,020 mm, Y-axis travel of 850 mm, and Z-axis travel of 805 mm. The machine includes a maximum workpiece diameter of 1,000 mm and a spindle speed of 18,000 rpm. If you are looking to get high-quality machining capabilities, consider the DN SOLUTIONS DVF 8000 universal machining centre we have for sale. Contact us for further details. • 15" color touchscreen display • CE certified • Metric configuration • Power supply: 3-phase AC 380V / 50Hz • Number of axes: 5 (X, Y, Z, A, C) • Simultaneous 5-axis machining • Absolute feedback system (absolute pulse coder on A- and C-axis) • Table diameter: 800 mm • Maximum workpiece diameter: 1,000 mm • Maximum workpiece height: 630 mm • Spindle motor power: 22 / 18.5 kW • Spindle taper: HSK-A63 • Tool holder type: HSK63A • Flood coolant pump: 2.5 kW / 0.44 MPa / 100 L/min • Through-spindle coolant: 4.0 kW / 2.0 MPa (20 bar) • Tool load monitoring • Portable MPG handwheel Codpfx Aozlg Ngsilsrh • Automatic power off • Program storage: 10,240 m (4 MB) • 1,000 program capacity • 400 tool offset pairs • 48 work coordinate systems • Large capacity memory: 2 GB • Data server & memory card: 2 GB • Embedded Ethernet • iHMI easy operating system (EZI & Machining Cycle) • DSQ1 (AICC II – 200 blocks) Additional equipment • Hinged belt chip conveyor (rear side) • Cyclone filter system • Renishaw probe ready (RMI-Q) + software • External power transformer • Electrical line filter • Machine lifting hooks

Condition: excellent (used), Year of construction: 2012, operating hours: 9,300 h, travel distance X-axis: 8,000 mm, travel distance Y-axis: 3,100 mm, travel distance Z-axis: 1,600 mm, feed rate X-axis: 25,000 m/min, feed rate Y-axis: 25,000 m/min, spindle speed (max.): 4,000 rpm, total width: 6,000 mm, total height: 6,000 mm, total length: 14,000 mm, table length: 8,000 mm, table width: 2,500 mm, table load: 15,000 kg, spindle motor power: 43,000 W, Y Travel with head 180 = 3700 Y from floorplate to spindle middle = 4200 mm Chain ATC Tool changer 80 positions Rotary table 1500 x 1500 with V-Axis 1500 mm Table load 15.000 Kg Optional Box table 3500 x 1000 x 1000 mm Under power  Cedpfx Ajzz H Nxeilorh Spindle hours 9300 H  X-Axis: 8000mm Y-Axis: 3100mm Z-Axis: 1600mm Table Length: 8000mm Table Width: 2500mm Table load: 15000 Power on spindle: 43kW Spindle speeds: 4000Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 25000mm/min. Feed rate Y-Axis: 25000mm/min. Feed rate Z-Axis: 25000mm/min. Control: iTNC530 Millinghead auto-index:2.5 x 2.5° Length: 14000mm Width: 6000mm Height: 6000mm Weight: 68000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!