Used Pemo S-Atmao/Ab/Dcb75 for sale (71,490)

Year of construction: 2011, condition: good (used), Plant: PEMO pump, sludge pump, chamber filter press feeding pump Type: S-ATMAO/AB/DCB75 Fjdpfx Aei Ezhbolqogb Series: AO/AB Year of construction: 2011 HP: 22/50 Engine: Cantoni Power: 37kW Speed: 2951 rpm Machine number: 3102 Dimensions: L 1200mm Application: Designed for very abrasive and/or acidic slurry applications. Delivery volume: from 1 to 1500 m3/h / depending on the medium

Condition: new, Year of construction: 2025, Z-MaT DT500E-S, Siemens 828 D ShopTurn 15" Touch CNC Turning Center, with Sub-Spindle, Driven Tools, and True Y-Axis, 35° Slant Bed Max. Swing Diameter: 650 mm Max. Turning Diameter: 320 mm Max. Turning Length: 550 mm Linear Roller Guides on All Axes Rapid Traverse X/Z/Y: 20/20/12 m/min Y-Axis Travel: 140 mm, +/- 70 mm Turret: 12 Stations BMT55 — 12 Driven Positions Max. Turret Speed: 4000 rpm, 3 kW Main Spindle: Chuck Diameter: 254 mm Spindle Nose: A2-8 Max. Bar Capacity: 75 mm Spindle Bore Diameter: 86 mm Spindle Drive Power, Direct Drive: 15/16 kW Max. Spindle Speed: 3500 rpm Sub-Spindle: Chuck Diameter: 152 mm Fsdpfswwvldjx Alqjgb Spindle Nose Standard: A2-5 Max. Bar Capacity: 46 mm Drive Power: 11 kW Max. Speed: 3000 rpm Dimensions (W x D x H): 3.1 x 2.0 x 2.25 m Weight: 5.3 t Standard Equipment: Parts Catcher (Preparation) Hinged Belt Chip Conveyor Oil Skimmer Coolant System 3-Color Warning Light Work Area Lighting Centralized Lubrication System Programmable Tailstock Set of Soft Jaws Tools and Toolbox CE Conformity Operating Manual The machine will be exhibited at EMO, Hall 12/D10 and will be available immediately afterwards. A wide range of automation options is available, such as bar loaders and loading robots.

Condition: used, functionality: fully functional, Year of construction: 2010, machine/vehicle number: 2455698, power: 41 kW (55.74 HP), load capacity: 750 kg, mast type: telescopic, lifting height: 26,000 mm, platform length: 5,480 mm, platform width: 2,440 mm, overall weight: 18,000 kg, transport length: 5,960 mm, transport width: 2,500 mm, transport height: 3,200 mm, fuel type: diesel, color: red, Technical data Year of manufacture: 2010 Engine: Diesel Working height: 28.00 m Fodpfx Ajyqzrzjlqjgb Platform height: 26.00 m Platform extension: 2.13 m Platform dimensions (L x W): 5.48 m x 2.44 m Overall dimensions (L x W x H): 5.96 m x 2.50 m x 3.20 m Load capacity: 750 kg Controls: Proportional Climbing ability: 40% Weight: 18,000 kg Travel speed: 0.7 - 4.0 km/h All-wheel drive General signs of use, fully functional

Condition: used, functionality: fully functional, Year of construction: 2017, machine/vehicle number: 2451648, load capacity: 600 kg, lifting height: 30,150 mm, platform length: 5,800 mm, platform width: 1,200 mm, overall weight: 21,500 kg, transport length: 6,420 mm, transport width: 1,390 mm, transport height: 3,190 mm, fuel type: electric, color: blue, Equipment: UVV, all wheel drive, Technical Data Year of manufacture: 2017 Motor: Electric Working height: 32.15 m Platform height: 30.15 m Platform extension: 1.90 m Platform dimensions: 5.80 x 1.20 m Rated load: 600 kg Travel speed: 0.7 - 3.0 km/h Climbing ability: 25% Dimensions (L x W x H): 6.42 x 1.39 x 3.19 m Fully functional Fedpfxeyqzcaj Alqegb General signs of use

Condition: used, functionality: fully functional, Year of construction: 2018, machine/vehicle number: 2451638, load capacity: 600 kg, lifting height: 30,150 mm, platform length: 5,800 mm, platform width: 1,200 mm, overall weight: 21,500 kg, transport length: 6,420 mm, transport width: 1,390 mm, transport height: 3,190 mm, fuel type: electric, color: blue, operation weight: 21,500 kg, Equipment: UVV, all wheel drive, differential lock, Technical Data Year of manufacture: 2018 Engine: Electric Working height: 32.15 m Platform height: 30.15 m Platform extension: 1.90 m Platform dimensions: 5.80 x 1.20 m Rated load: 600 kg Fgodpeyqytwjfx Alqjb Travel speed: 0.7 - 3.0 km/h Climbing ability: 25 % Dimensions (L x W x H): 6.42 x 1.39 x 3.19 m Fully functional General signs of use

Condition: good (used), Year of construction: 2008, operating hours: 24,629 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,650 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 900 kg, overall weight: 24,000 kg, transport height: 3,000 mm, oil tank capacity: 2,000 l, power: 90 kW (122.37 HP), volume flow: 1,350 m³/h, transport width: 2,400 mm, transport length: 10,000 mm, Good day, We hereby offer you, without obligation, a used baling press from the manufacturer Presona AB, model LP 100 CH2 S. The following technical data has been taken from the manufacturer’s operating manual and brochures. We cannot guarantee the accuracy or completeness of this information. Manufacturer: Presona AB, Sweden Model: LP 100 CH2 S Year of manufacture: 2008 Total operating hours: 24,629 hours (as of February 2026) Effective pump operating hours: 10,090 hours Main press force: 100 t Specific compaction force: 81 N/cm² Pre-press flap force: 50 t Fill chute dimensions: 1,650 x 1,100 mm Fill volume per press cycle: 3 m³ Fedpfxeymmmps Alqogb Bale dimensions: 1,100 x 1,100 mm Drive power: 2 x 45 kW Tying: 5-fold vertical Hydraulic oil tank capacity: 2,000 L Transport weight (press only after disassembly): approx. 25 t Note: The machine was used in a recycling facility for compacting paper, cardboard, and films/foils. The press is in good condition and will be replaced by a new, larger machine in July 2026. Until then, it can be viewed in operation with materials processed. We would be pleased if this press is of interest to you. Your Service Team Mertens & Frowein GmbH

Condition: used, The ABS 325 S NC is a robust and precise addition to the category of Horizontal Mitre Cutting Bandsaws, belonging to the Auto Miter Bandsaw group by KNUTH. This high-performance production band saw features a dual column design that enhances stability and cutting accuracy. The material feed is powered by a controlled servo motor with ball screw drive, offering a remarkable positioning accuracy of ±0.2 mm. Users can easily program and manage operations via the Omron touchscreen controller, which supports up to 30 programs with 50 steps each. For added flexibility, the ABS 325 S NC includes an option for hydraulic bundle clamping, alongside a digital display for easy reading of manually set miter angles. This fully automated saw excels in applications requiring mitre cuts in solid materials, tubes, and profiles, and is designed for high durability in demanding environments. With features like a hydraulic cutting angle clamping and automatic stroke height control, this saw ensures minimal downtime. You can request a quote for the ABS 325 S NC in the category of Horizontal Mitre Cutting Bandsaws and discover why this Auto Miter Bandsaw is a perfect fit for your production needs. Fjdpfx Alsyq N Iqoqegb

Condition: used, Year of construction: 1980, ja feed 80 - 800 m/min 1848 weight of the machine ca. 2,2 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Fgedpfjix Rdmex Alqjb Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, bore capacity in steel (diameter) 45 mm throat 350 mm bore stroke 180 mm 4 speeds 30 - 765 U/min table-size 720 x 560 mm total power requirement 3,4 kW weight 950 kg dimensions 1200 x 800 x 2300 mm Features: - Automatic feed - Coolant system - Infinitely variable speed control - Adjustable fixed depth stop - Emergency stop foot switch - Drill chuck Fgjdpfxjvuz Tve Alqob

Condition: good (used), Year of construction: 1972, Drilling capacity in steel 70 mm Drilling capacity in cast iron 80 mm Spindle holder MK 5 Spindle projection 400 mm Spindle stroke 240 mm Column diameter 250 mm Speed range, infinitely variable 45 - 1325 rpm 5 feeds 0.1, 0.14, 0.2, 0.28, 0.4 mm/rev Table size 880 x 660 mm Motor power 3 kW Dimensions L x W x H 880 x 1200 x 2500 mm Machine weight 1400 kg Accessories / Special features: - Infinitely variable speed adjustment via PIV gearbox and reduction gear - Large clamping table 880 x 660 mm - Feed via cross lever - Large drilling depth adjustment with 240 mm fixed stop - Swivel table - Emergency stop switch - Coolant system Fodpfxet Uzk Rj Alqjgb Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, mileage: 198,000 km, power: 357 kW (485.38 HP), first registration: 03/2024, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, navigation system, parking heater, Iveco S-Way AS440S49T/P * !!! RENTAL !!! * German vehicle * Leaf / air suspension * Wheelbase 3,800 mm * EURO 6E * Automatic transmission Fjdpovvf Tvsfx Alqogb * Retarder * Double tank system 640 l + 480 l * Leather steering wheel * Full LED * Automatic lights * Automatic climate control * Auxiliary heating * On-board computer * Axle load indicator * Navigation * Hill start assist * Lane departure warning * Multifunction steering wheel * Electric windows * Electric adjustable and heated exterior mirrors * 2 beds * Refrigerator * Preparation for auxiliary drive * Central locking with radio * Driver's seat with air suspension * Seat heating for driver's seat Prior sale and errors are expressly reserved! Sale exclusively under our terms and conditions Important note? Important information: Despite careful checking of all details in our offer, errors may creep in. These are sometimes caused by transmission errors in the systems of the various platform providers. We would therefore like to point out that all information is provided without guarantee and does not represent a legal claim. Legal: This sales advertisement does not constitute an offer within the meaning of Section 145 of the German Civil Code (BGB). Rather, it is information for the initiation of a contract. The information provided here is without guarantee and therefore does not represent any guaranteed properties.

Condition: used, bore capacity in steel (diameter) 60 mm throat 400 mm total power requirement 4,4 kW Fodpfx Ajwftt Islqsgb weight of the machine ca. 1,7 t

Condition: used, Year of construction: 1956, bore capacity in steel (diameter) 50 mm throat 385 mm bore stroke 240 mm table surface area ø 500 mm spindle taper MT 5 spindle turning speed range 40 - 800 U/min feeds 0,1/0,14/0,2/0,28/0,4 mm/U column diameter 220 mm distance between table/spindle max. 670 mm distance spindle/base plate 1180 mm Fgsdpfevh I U Tox Alqob total power requirement 4 kW weight of the machine ca. 1,4 t dimensions of machine L x W x H 1,5 x 0,75 x 2,4 m Accessories: drill chuck, coolant

Condition: new, ALZMETALL Alzstar 18-T/S, Manufacturer. Alzmetall Type: Alzstar 18-T/S Condition: New Drilling capacity in St 60: 18 mm, Thread cutting in St 60: M 12, Thread cutting in GG 20: M 14, Short spindle: MK 2, Spindle speed: 225-4,300 rpm, Spindle stroke: 80 mm, Throw: 190 mm, Column diameter: 65 mm, Machine table - usable support: 300x240 mm, T-slots number - width - distance: 2 x 12 x 80 mm, Distance spindle-machine table min./max.: 75/357 mm, Machine base plate usable support: 300x240 mm, T-slots number - width - distance: 2 x 12 x 80 mm, Distance Spindle base plate min./max.: 437/437 mm, Feed by hand, Machine table height adjustment: hand crank, Total power requirement: 0.37/0.55 kW, Machine height: 840 mm, Weight: 110 kg Standard equipment: Main switch with motor protection switch, lockable Reversing switch for clockwise and counterclockwise rotation Infinitely variable speed adjustment Protection class IP 54 Mushroom push button (latching) for EMERGENCY STOP Spindle protection with electrical protection Optional: - LED machine light - Under table - Drill chuck 1-13 or 3-16 Available now. For self-collection. Forklift available. Shipping also possible Fgjdpfxexd Trre Alqob Subject to errors, changes and prior sale. Other Alzmetall table drilling machines and pillar drilling machines always in stock!

Condition: reconditioned (used), Year of construction: 2015, operating hours: 28,748 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 570 kg, overall weight: 20,000 kg, oil tank capacity: 600 l, power: 37 kW (50.31 HP), volume flow: 350 m³/h, Technical data baler: Manufacturer Presona AB, Sweden Type LP 60 VH1 Year of construction 2015 Total operating hours, 30,143 hours, as of July 2025 Effective pump running time onl 6,527 hours, as of July 2025 Number of pressed bales 115,193 bales, as of July 2025 Press force pre press 25 t Main press force 60 tonnes Specific pressing force 73N/cm² Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Fsdpfx Alovn Tg Ioqegb Theoretical throughput capacity 800 m³/hour Throughput capacity under operating conditions 350 m³/hour Bale dimensions 1,100 x 750 mm Drive power 37 kW Tying 5-fold vertical, fully automatic Throughput capacity with a Bulk weight of 50 kg/cbm 11 to 14 tonnes/hour Bale weights 420 to 570 kg, depending on material Hydraulic oil tank volume 600 litres Baler dimensions assembled with hopper 10,100 x 3,750 x 4,310 mm (l x w x h) Transport dimensions excluding press 10,100 x 2,400 x 3,000 mm (l x w x h) Machine weight press approx. 20 tonnes Condition of the press: The press was partially overhauled in our workshop and then tested in manual and automatic mode. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Grease cartridges of the automatic roller lubrication system replaced Slide rails cut out from the press floor in the press room Underbody reinforced with welded sheets New HARDOX slide rails welded in Wire station with deflection rollers for the lower wire cleaned and made operational Slide rails cut out from the floor in the press channel New HARDOX slide rails welded in Both side walls of the press channel dismantled, derusted Worn side wall plates cut out Complete side walls covered with new wear plates and welded Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Machine checked, general maintenance work carried out and press tested in manual and automatic mode Comments: The press is sold without a conveyor belt and without wire stations. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, This listing is for an ÄKTA ready™ Chromatography System The unit is in full working condition and is ready for immediate release The ÄKTA ready™ Chromatography System is a single‑use liquid chromatography platform engineered for bioprocessing, process scale‑up, and GMP‑regulated manufacturing of biologics, including monoclonal antibodies, recombinant proteins, viral vectors, nucleic acids, and other sensitive therapeutic products. Fedoyhhgaopfx Alqogb Key Characteristics - Single‑use disposable flow paths — eliminate the need for cleaning and cleaning validation between runs, reduce downtime, and minimize cross‑contamination risk. - Flexible operation — available in multiple configurations (isocratic, gradient, variable UV, extended) to match different purification needs. - Scalable platform — flow kits for low and high flow rates support a wide range of process volumes; systems scale from small‑batch purification to larger process requirements when paired with larger ÄKTA ready™ XL models. - Designed for GMP environments — extensive documentation and regulatory support help meet compliance demands in regulated biopharmaceutical production

Condition: used, Year of construction: 2011, operating hours: 85,000 h, functionality: fully functional, fuel type: gas, output voltage: 400 V, output frequency: 50 Hz, Full trigeneration plant with York absorption chiller. Regularly maintained and covered by the supplier’s preventive and corrective maintenance contract. Major overhaul performed in 2021 at 61,000 operating hours. Fgedpfx Aey Ibldelqsb New Long Block (LB) supplied by INNIO on the occasion of the major overhaul, documentation available. • 87,670 plant hours; • 26,904 engine hours; The crankshaft has not been machined, while the engine block has been machined for the use of oversized liners. Overhauled alternator, report available. Price and further information available upon request.

Condition: used, Pizza ovens – (without steam injection) We have 5 units – used. From our own operation. Suitable for flammkuchen, pizza, lahmacun, etc. Used until recently, ready for immediate use, only test run possible. Fgodpfx Asyg N D Djlqob

Condition: good (used), functionality: fully functional, Year of construction: 2017, operating hours: 472 h, power: 60 kW (81.58 HP), load capacity: 750 kg, lifting height: 26,000 mm, lifting power: 750 kg/m, platform length: 5,480 mm, platform width: 2,440 mm, overall weight: 19,800 kg, transport length: 5,960 mm, transport width: 2,500 mm, transport height: 3,200 mm, fuel type: electric, wheelbase: 4,100 mm, Equipment: all wheel drive, === KEY SPECIFICATIONS === Year of manufacture: 2017 Operating hours: 472 h Machine width: 2.50 m Drive system: 4x4 Driveable at full height: Yes Extendable platform: Yes (2.13 m) Power output: Electric drive, 80 V / 750 Ah Working height: 28.00 m Platform capacity: 750 kg Drive type: Electric – Hydraulic Battery type: Lead-acid Self-levelling outriggers: Yes Platform dimensions (L x W): 5.48 × 2.44 m Tyre type: Non-marking CE certified: Yes Weight: 19,800 kg Indoor / Outdoor use: Both Fgsdpfx Ajx Ivqnolqjb === HIGHLIGHTS === Selected from a professional fleet with verifiable technical data CE-certified machine Driveable at full working height High platform capacity suitable for heavy-duty applications === CONDITION === Machine is in original operational condition. Electric drive system fully functional. Battery system present (80 V / 750 Ah). Available directly from stock in Sittard. === LOCATION & DELIVERY === Located in Sittard, The Netherlands. Worldwide transport available. Price on request (EXW / excl. VAT). Reliable heavy-duty electric scissor lift designed for demanding indoor and outdoor applications. High load capacity, full-height drivability and extendable platform ensure maximum productivity. Machine is CE-certified and ready for immediate deployment. === DELIVERY === Crane loading available on request. Flexible transport solutions available depending on destination. Logistics handled by Collé Rental & Sales.

Condition: good (used), functionality: fully functional, Year of construction: 2017, operating hours: 6,934 h, load capacity: 750 kg, lifting height: 20,500 mm, lifting power: 750 kg/m, platform length: 4,300 mm, platform width: 2,400 mm, overall weight: 11,000 kg, transport length: 4,600 mm, transport width: 2,450 mm, transport height: 2,970 mm, fuel type: diesel, tire condition: 75 %, wheelbase: 3,140 mm, Equipment: all wheel drive, === KEY SPECIFICATIONS === Year of manufacture: 2017 Operating hours: 6,934 h Machine width: approx. 2.45 m Drive: 4x4 Driveable at full height: Yes Extendable platform: Yes Engine power: Diesel (manufacturer on request) Working height: 22.5 m Platform capacity: 750 kg Drive type: Diesel Battery type: N/A (diesel powered) Self-levelling outriggers: Yes (WDS system) Platform dimensions (L × W): 4.30 × 2.40 m Tyre type: Rough terrain (non-marking: no) CE certified: Yes Weight: approx. 11,000 kg Indoor / outdoor use: Outdoor === HIGHLIGHTS === Carefully selected machine with verifiable history CE-certified and compliant with European safety standards Equipped with self-levelling hydraulic outriggers (WDS) High platform capacity for heavy-duty applications Ready for immediate transport and operation === CONDITION === Machine in original working condition. Diesel engine and hydraulic system operate correctly. Tyres in good condition (approx. 75% tread remaining). Available directly from stock. Fsdpfxox Ihics Alqjgb === LOCATION & DELIVERY === Located in Sittard, The Netherlands Worldwide delivery possible Price on request (EXW / excl. VAT) Reliable AB Lift S225-24 D4 WDS diesel scissor lift for demanding outdoor applications. Thanks to its 4x4 drive, self-levelling outriggers and high platform capacity, this machine is ideally suited for construction, industrial and infrastructure work. All machines from Collé Rental & Sales are professionally inspected and ready for immediate use. Spare parts, service and technical support available on request. === DELIVERY OPTIONS === Crane loading available on request Flexible transport solutions tailored to destination and logistics Transport professionally arranged by the Collé Rental & Sales logistics team

Condition: good (used), functionality: fully functional, Year of construction: 2019, operating hours: 496 h, load capacity: 750 kg, lifting height: 14,300 mm, lifting power: 750 kg/m, platform length: 4,500 mm, platform width: 2,360 mm, overall weight: 9,000 kg, transport length: 4,840 mm, transport width: 2,460 mm, transport height: 2,370 mm, fuel type: electric, tire condition: 85 %, wheelbase: 3,200 mm, color: blue, Equipment: UVV, === KEY SPECIFICATIONS === Year of manufacture: 2019 Operating hours: 496 h Machine width: 2.46 m Drive system: 2WD (two-wheel drive) Driveable at full height: Yes Extendable platform: Yes (up to 2.70 m) Power output: Electric drive, 80 V / 540 Ah Working height: 16.30 m Platform capacity: 750 kg Drive type: Electric Fsdpfox Nhvrex Alqsgb Battery type: Lead-acid Self-levelling outriggers: No Platform dimensions (L × W): 4.50 × 2.36 m Tyre type: Non-marking CE certification: Yes Weight: approx. 9,000 kg Indoor / Outdoor use: Both (Indoor & Outdoor) === HIGHLIGHTS === Carefully selected from reliable sources with verifiable history CE certified, full documentation included Ready for immediate transport and operation Comprehensive technical documentation available === CONDITION === Clean, original condition with well-maintained systems. Battery tested and in good working condition. Immediately available from stock in Sittard. === LOCATION & DELIVERY === Located in Sittard, the Netherlands. Worldwide delivery available. Price on request (EXW / excl. VAT). Reliable electric scissor lift with high platform capacity and compact design. Ideal for indoor and outdoor applications where low emissions and quiet operation are required. All machines are fully inspected, CE approved and ready for immediate deployment. Spare parts and professional technical assistance available on request. === DELIVERY === Crane loading available on request. Flexible shipping options tailored to your destination. All transport handled by Collé Rental & Sales.

Condition: good (used), functionality: fully functional, Year of construction: 2020, load capacity: 600 kg, lifting height: 30,000 mm, lifting power: 600 kg/m, platform length: 5,800 mm, platform width: 1,200 mm, overall weight: 21,500 kg, transport length: 6,420 mm, transport width: 1,390 mm, transport height: 3,190 mm, construction height: 3,190 mm, fuel type: electric, tire condition: 80 %, wheelbase: 4,870 mm, ground clearance: 200 mm, color: blue, Equipment: all wheel drive, === KEY SPECIFICATIONS === Year of manufacture: 2020 Operating hours: On request Machine width: 1.39 m Drive system: 4x4 (4WD) with 4-wheel steering (4WS) Driveable at full height: Yes Extendable platform: Yes (1.90 m extension) Fsdpfjx Nft Ijx Alqjgb Power output: Electric drive, 80 V / 560 Ah Working height: 32.00 m Platform capacity: 600 kg Drive type: Electric Battery type: Lead-acid Self-levelling outriggers: Yes Platform dimensions (L × W): 5.80 × 1.20 m Tyre type: Non-marking (solid) CE certification: Yes Weight: 21,500 kg Indoor / Outdoor use: Indoor & Outdoor === HIGHLIGHTS === Carefully selected from reliable sources with verifiable history CE certified, full documentation included Ready for immediate transport and operation Comprehensive technical documentation available === CONDITION === Clean, original condition with well-maintained systems. Batteries tested and in good working condition. Immediately available from stock in Sittard. === LOCATION & DELIVERY === Located in Sittard, the Netherlands. Worldwide delivery available. Price on request (EXW / excl. VAT). Reliable machines from trusted sources, supported by professional technical expertise. All machines are fully inspected, CE approved and ready for immediate deployment. Spare parts and professional assistance available on request. === DELIVERY === Crane loading available on request. Flexible shipping options tailored to your destination. All transport handled by Collé Rental & Sales logistics team.

Condition: good (used), Technical data for pallet rack frame: Racking system: META (Thyssen) Type: Multipal S Fodpfx Aeyz Tczjlqsgb Included in delivery: 01x pallet rack frame, used Material color: Sendzimir galvanized Frame type: SR 85|20 Profile dimensions: 85 x 75 x 2.0 mm Including horizontal and diagonal braces, frame protectors and base plates The frames are pre-assembled (bolted lattice construction) Height: 7,000 mm Depth: 500 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for collection only. Transport or shipping beyond self-collection is subject to additional costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: good (used), Fan model: HPB-F-040-300T Motor model: SKh90-2S2 Latest use: Air cushion table External dimensions: Width: 700 mm. Fjdpfxjyz Tc Is Alqegb Depth: 450 mm. Height: 450 mm. Weight: approx. 20 kg. Condition: good, second-hand

Condition: ready for operation (used), Load capacity: 1000 kg Lifting range: 85 - 650 mm Fork length: 1150 mm Fork width: 160 mm carrying width: 510 mm Fjdpfod Ax I Dex Alqsgb Total length: 1500 mm Total height: 1250 mm