Used Patrol Boat Ex Water Police Wsp1 for sale (13,347)

Year of construction: 1975, condition: good (used), functionality: fully functional, drive type: Diesel 130 Kw, Patrol boat from the former GDR, later used by the Berlin Water Police (WSP 1), IFA 6-cylinder diesel engine. Winter-capable, icebreaker rating up to 3 cm thickness, certified for all waters including open sea. Dimensions: 11.90 m length, 2.90 m beam, draft 0.90 m. Top speed: over 30 km/h. Engine: Schönebeck 6-cylinder, 4-stroke diesel, type DM 6 VD 14.5/12-1. According to research, the engine delivers either 170 or 220 HP from 10 L displacement. These engines are known for low fuel consumption: at canal cruising speeds (8–12 km/h), consumption is 6–8 L per hour. Ledpfx Afsy D Rk Io Ssrt Equipment includes signal mast, mast spotlight, boat lighting. Dual helm positions: inside cabin and flybridge. AGM batteries, engine start with 24 V system, 12 V onboard network. Brand new onboard toilet. Electric and manual bilge pumps (automatic/manual operation). Complete overhaul from 2021 to 2023: 5-layer primer and 3-layer antifouling coating. Steel hull, aluminium superstructure. New electrical wiring, new exhaust system, new clutch, engine overhauled, fuel tank serviced, new lines installed, new air filter. Engine starts and runs flawlessly, forward and reverse gear shifts without issues. Some work is still required to complete comfort features. The vessel is suitable as a small tugboat or as a work or fishing boat. Lower helm station: the gauges still need to be installed; required instruments and switches are included.

Condition: used, Year of construction: 2023, functionality: fully functional, turning diameter over cross slide: 410 mm, turning length: 500 mm, turning diameter: 410 mm, spindle bore: 80 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 90 mm, travel distance Z-axis: 510 mm, spindle motor power: 22,000 W, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 5,000 rpm, total height: 2,145 mm, total length: 3,272 mm, total width: 2,619 mm, quill stroke: 150 mm, overall weight: 6,800 kg, swing diameter over bed slide: 580 mm, Equipment: documentation/manual, We offer this used Okuma LB3000 EX II MY CNC lathe with ARMROID Automation. Year: 2023. Control: OSP-P300LA Excellent Clean Condition, fully operational and under power. Configuration: Single spindle CNC Turning Center with Armroid Robotic Arm. Main Spindle Seed: Up to 5,000 rpm Spindle Bore / Bar Capacity: 80mm Lsdpfx Ajzi Ihfsf Sjrt Max Turning Diameter: 410mm Max Turning Length: 500mm Swing Over Bed: 580mm Turret: 12-station live tol turret Spindle Motor Power: 15 kW (20 HP) - (continuous) Y Axis Travel: 120mm (+70 * -50mm) Thermal Stabilization system (TAS for spindle and structure) to mitigate thermal expansion. Tail Stock Integrated Okuma robotic arm system for lights-out operation. Chip conveyor Regularly maintained and in excellent condition - last service September 2025 Byer is responsible for removal and delivery Machine can be used with or without robot loader as required making it very versatile

Condition: excellent (used), Year of construction: 2008, operating hours: 49,673 h, functionality: fully functional, clamping force: 800 kN, screw diameter: 35 mm, displacement volume: 156 cm³, plate length: 740 mm, plate height: 640 mm, total length: 5,350 mm, total width: 1,700 mm, total height: 2,000 mm, overall weight: 6,500 kg, Equipment: documentation/manual, KRAUSS MAFFEI KM 80-380 EX Stock No.: 503232 Manufacturer: KRAUSS MAFFEI Type: KM 80-380 EX Control: MC5 Year of manufacture: 2008 Operating hours: 49673 h Lredpfjz Az Rdox Af Sst Technical data, clamping unit side Clamping force: 800 kN Tie bar spacing, horizontal x vertical: 520 x 420 mm Platen size, horizontal x vertical: 640 x 740 mm Minimum mold thickness: 300 mm Maximum mold thickness: 790 mm Ejector stroke: 100 mm Ejector force: 22 kN Centering of moving platen, diameter: 125 mm Centering of fixed platen, diameter: 125 mm Technical data, injection side Screw diameter: 35 mm Injection volume: 156 cc Injection pressure: 2429 bar Screw length: 23 l/d Screw speed: 477 rpm Free injection flow rate: 289 g/s Number of heating zones: 5 Dimensions & Weight Machine dimensions, length x width x height: 5.35 m x 1.7 m x 2 m Total weight: 6500 kg Equipment Screen text in German CEE socket 16A Air valve 1x Machine with material hopper Machine with water manifold Leveling elements EUROMAP 67 Handling interface USB interface Schuko socket 10A Tool heating 24x

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, temperature: 35 °C, operating pressure: 75 bar, energy consumption: 64 kWh, Industrial plant for the treatment and concentration of process water as well as for nutrient recovery. The plant combines a double-pass reverse osmosis (RO) system with a thermal evaporator unit and was originally developed for biogas production to recover ammonium-containing fertilizer from process water and digestate. The plant was never commissioned due to the operator's insolvency and is in a preserved condition. The system is suitable for operators from the industrial, environmental technology, or agricultural sectors who are looking for a rapidly available solution for water treatment, ZLD (Zero Liquid Discharge), or nutrient recovery. Lrsdpfoyr H Anex Af Set Technical data System type: RO Double Pass + Evaporator Model: SIMPEC RO Double Pass 8000 44 8 Evaporator 57 000 Year of construction: 2020 Permeate output: Stage 1: 7.5 m³/h Stage 2: 6.7 m³/h Permeate quality:

Condition: ready for operation (used), Year of construction: 1999, machine/vehicle number: 9558, Used fully functional WJS waterjet cutting machine with KMT SLIV 50 HP pump. Machine is in disassembled condition and can not be inspected. Installation and commissioning will be done by us and is not included in the price. Lsdpfxoi Hckro Af Sjrt The machine can also be completely overhauled ( new control cabinet, new control and new CE. This would mean a surcharge of about 50.000€)

Condition: excellent (used), Year of construction: 2009, operating hours: 35,808 h, functionality: fully functional, clamping force: 800 kN, screw diameter: 40 mm, displacement volume: 204 cm³, injection pressure: 1,860 bar, injection weight: 186 g, Here we offer the following well-maintained used injection moulding machine as an injection moulding machine dealer: Of course, we also purchase well-maintained injection moulding machines from the 2010 model year onwards. We have been a wholesale dealer for injection moulding machines for over 25 years. Manufacturer: KraussMaffei Model: KM EX 80-380 (fully electric) Serial number: 61013142 Year of manufacture: 2009 Operating hours: 35,808 h Control system: MC 5 Fully functional Condition: very well maintained Machine comes from original German ownership xxxxx without robot / without temperature control unit xxxxx Extras: - Pneumatic needle shut-off nozzle - 1 pneumatic valve on BWAP - Pneumatic control for 1 hot runner - Pneumatic control for hot runner/cold runner - Reject chute - Nozzle guard door – ejector area safety door foldable - Euromap 18 interface on FWAP - Electrically actuated ejector plate in BWAP - Hydraulic auxiliary unit for core pulls - Injection-compression control - 2 x hydraulic core pulls (on BWAP and FWAP) - Pressure relief for core pulls on BWAP and FWAP - Water manifold, 8 circuits - 8 heating zones for hot runner - Extrusion injection circuit with position control - 3 x 230V sockets, 2 x CEE 16A / 1 x CEE 32A - EUROMAP 67 signal interface for robot - Start-up sequence, quality assurance package, cycle time analysis, cycle memory, event protocol - BluePOWER package: energy consumption display - Graphics analysis package, trend chart - Interface for temperature control unit - Cycle time analysis, actual cycle time optimization Injection unit: Screw diameter: 40 mm Shot weight: 186 g / PS Injection pressure: 1,860 bar Shot volume: 204 cm³ Clamping unit: Clamping force: 80 t / 800 kN Tie bar spacing: 420 x 420 mm Platen size: 655 x 670 mm Mould installation height: 250 mm Lsdpfx Afsyrd U Uo Sert Max. platen gap: 750 mm Ejector stroke/force: 100 mm / 22 kN Clamping unit fully electric Warranty: Warranty until first commissioning Loading/Shipping: Free loading onto buyer’s truck or free delivery within Germany against reimbursement of freight charges Available from our warehouse in Hannover, Germany

Condition: used, This listing is for the Grant GD120 Water Bath/Circulator The unit is in full working condition and is ready for immediate use The Grant GD120 is a digitally controlled stirred water bath and circulator ideal for laboratory use, offering high precision and flexibility. Here's a breakdown of its features and capabilities: Key Features Immersion Thermostat with Intelligent Control Optimisation (ICO): Enables adaptive PID control for exceptionally stable temperature regulation. Integral Pump: Built-in circulation pump with a maximum flow rate of 17 L/min, allowing both sample immersion and external fluid circulation. User Interface: Equipped with a clear digital display, a rotor plus two-key control, timer function for reaction timing, and visual + audible alarms to notify operators of critical conditions. Preset Temperature Control: Supports one adjustable operating setpoint plus three preset temperature options for fast switching. Safety Features: Includes float-switch low liquid protection and an adjustable over-temperature cut-out for sample and user safety. Liquid Type Selection: Automatically adjusts heater power and temperature parameters depending on chosen liquid (e.g., water, oil, glycol mixtures). Temperature Range & Accuracy Plastic Tanks (P-series): From around ambient +5 °C up to ~99 °C. Stainless Steel Tanks (S-series): From –15 °C up to ~120 °C. High Stability: ±0.02 °C for stable temperature control. Technical Specifications & Obsolescence The GD120 series includes multiple tank sizes: plastic tanks (P5, P12, P18) and stainless steel tanks (S5, S12, S18, S26, S38), offering varied capacities for different lab needs. This series is now considered obsolete, though it remains functional and reliable for many applications. Supporting Documentation & Manual Lrsdpfx Afsxhfl Ej Sot Operating Manual: The GD120 is covered by the general purpose stirred thermostatic baths manual (shared with GD100), outlining temperature settings, calibration procedures, safety guidance, and maintenance. Datasheet Summary: Positioned within the broader Grant Optima product range, the GD120 sits between simpler (GD100, up to 100 °C) and higher-spec models (GR150 up to 150 °C, GP200 up to 200 °C)

Condition: refurbished (used), Year of construction: 2006, table length: 3,500 mm, table width: 1,500 mm, Pictures are in current condition - two Z-axes - 1 x 45° Schnedikopf , 1 x 2D - control unit will be renewed - will be sandblasted and repainted - pump optionally available - available in 12-16 weeks after order Special features: - individually customizable to customer requirements Ledpfx Aonab Rzof Ssrt - 12 months or 2,000 hours warranty (not on spare and wear parts) We offer a discount when concluding a maintenance or service contract! Contact us and we will make you a customized offer!

Condition: like new (used), Year of construction: 2020, operating hours: 250 h, functionality: fully functional, 1.1 TECHNICAL DATA 1 x Waterjet cutting machine, NCP 4020 D 1 x FANUC 31iB d 1 x IGEMS Professional 1 x BevelJet cutting heads for AWJ abrasive waterjet cutting 1 x Fixed cutting heads for AWJ abrasive waterjet cutting 2 x SM3000 feed systems Lrodjxgua Aepfx Af Sjt 1 x KMT, Jetline 50 HP, 3.8 l/min, 4100 bar 1 x Cooling unit control cabinet 1 x Hose reel with spray nozzle 1 x Tool kit 1 x Machine zone safety guard 1 x PanelOne HMI operator interface "EDGECUT" 1 x Remote control for high-pressure pump 1 x Remote maintenance system 2 x Diaphragm pumps and 2 x extraction units 1 x Waste container 1000 l 1 x Pressure vessel 200 l or 2-ton abrasive online conveyor/online abrasive hopper 1 x Head protection package (zero-point measurement head 1) 1 x IGEMS 5X CAM 1 x MPG, portable handheld pendant 1 x Rotary unit SS (chuck 240 mm) Price €21,000 1.1.1 MACHINE DATA Table size (W x D): 4200 x 2275 mm - Machining area (W x D): 3980 x 2010 mm - X-axis travel 2D: 3530 mm - X-axis travel 3D: 3220 mm - Y-axis travel 2D: 2010 mm - Y-axis travel 3D: 1405 mm - Z-axis travel: 250 mm - Positioning accuracy (X/Y): +/- 0.050 mm/m - Repeatability (X/Y): +/- 0.025 mm - Rapid traverse (X-axis): 30,000 mm/min - Rapid traverse (Y): 15,000 mm/min - Rapid traverse (Z): 5,000 mm/min - Minimum distance between nozzles: 450 mm - Maximum distance between nozzles: 2,010 mm 1.2 CONNECTION DATA 1.2.1 MACHINE CONNECTION • Electrical connection: 3 x 400 V+PE, 16 A, 50 Hz • Pneumatic supply volume (incl. pressure vessel): 500 l/min • Pneumatic supply pressure: min. 6.5 bar 1.2.2 HP PUMP DATA/CONNECTION HP pump data: - KMT 50, Jetline, 4100 bar - 37 kW, circuit breaker at 400/50 Hz, 80 A CAD/CAM software: - IGEMS Professional

Condition: excellent (used), Manufacturer: KRAUSS MAFFEI Type: KM 120-380 EX Control: MC5 Year of manufacture: 2008 Operating hours: 10113 h Technical data, clamping unit Clamping force: 1200 kN Tie bar spacing h x v: 470 x 470 mm Lrjdpfx Afezyn Igo Sjt Platen size h x v: 780 x 735 mm Minimum mold height: 200 mm Maximum mold height: 450 mm Maximum mold thickness: 850 mm Opening stroke: 400 mm Ejector stroke: 150 mm Ejector force: 22 kN Centering of moving platen D: 160 mm Centering of fixed platen D: 125 mm Tool weight: 1485 kg Technical data, injection unit Screw diameter: 35 mm Injection volume: 156 cc Injection pressure: 2429 bar Screw length: 23 l/d Screw speed: 289 rpm Plasticizing rate: 27 g/s PS Injection rate into free air: 477 g/s PS Number of heating zones: 5 Dimensions & Weight Machine dimensions L x W x H: 6 m x 1.7 m x 2.19 m Total weight: 9700 kg Equipment • Screen display in German • Screen display in English • CEE socket 16A • Hydraulic core pull, 2x • Machine with water manifold • Machine without material hopper • Leveling elements • EUROMAP 12 interface • Schuko socket 10A

Condition: refurbished (used), Year of construction: 1999, - two cutting heads - control unit is renewed - will be sandblasted and repainted - Pump optionally available - available in 12-16 weeks after order Special features - individually customizable to customer requirements Lrodpfenab Sijx Af Sjt - 12 months or 2,000 hours warranty (not on spare and wear parts) We offer a discount when concluding a maintenance or service contract! Contact us and we will make you a customized offer!

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, CNC lathe Okuma LB 3000 EX II-MY C 450 Ljdez D Tt Tspfx Af Sjrt Control system: OSP-300LA Year of manufacture: 2018 Internal machine number: 77 Turning diameter over bed: 580 mm Turning diameter over slide: 470 mm Travel in X-axis: 260 mm Travel in Y-axis: 120 mm Travel in Z-axis: 510 mm Travel in C-axis: 360 mm Max. turning diameter: 340 mm Max. turning length: 450 mm Main spindle speed: 45 - 5,000 rpm Tool holder: BMT Tool turret: V12 (powered) Equipment: - Chip conveyor - One-touch IGF - Touch setter - Main spindle Kitagawa B210 - Coolant system

Condition: refurbished (used), Year of construction: 2000, table length: 1,000 mm, table width: 1,000 mm, operating pressure: 3,800 bar, (Pictures in current state) - prepared for two cutting heads (1x pure water) - Control unit will be renewed - will be sandblasted and repainted - Pump optionally available - available after order in 12-16 weeks Special features: - max. two cutting heads per Z-axis Lrjdsnab Rlepfx Af Sst - Can be individually adapted to customer requirements - 12 months or 2,000 hours warranty (not on spare and wear parts) We offer a discount when concluding a maintenance or service contract! Contact us and we will make you a customized offer!

Condition: like new (used), Year of construction: 2008, operating hours: 61,300 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 35 mm, clearance between the columns: 470 mm, pressure: 2,429 bar, Here we are offering the following well-maintained used injection moulding machine as part of our injection moulding machinery trading business. Of course, we are also actively purchasing well-maintained injection moulding machines from model year 2010 onward. We have been a wholesale dealer of injection moulding machines for over 25 years. ++++From Pharmaceutical Cleanroom Production++++ Manufacturer: KraussMaffei Machine type: KM 120-380 EX International size designation: 380 EX / 120 Machine no.: 61011287 Year of manufacture: 2008 Machine hours: 61,300 h Control system: MC5 Technical data - Clamping unit Clamping force: 1,200 kN Tie bar spacing H x V: 470 x 470 mm Platen size H x V: 780 x 735 mm Min. mould height: 200 mm Max. mould height: 450 mm Max. platen distance: 850 mm Opening stroke: 400 mm Ejector stroke: 150 mm Ejector force: 22 kN Centric ring for moving platen D: 160 mm Centric ring for fixed platen D: 125 mm Mould weight: 1,485 kg Technical data - Injection unit Screw diameter: 35 mm Stroke volume: 156 ccm Injection pressure: 2,429 bar Screw length: 23 l/d Screw speed: 289 rpm Plasticising rate: 27 g/s PS Free shot weight: 477 g/s PS Number of heating zones: 5 Dimensions & Weight Machine dimensions LxWxH: 6 m x 1.7 m x 2.19 m Total weight: 9,700 kg Equipment Display language German Display language English Lsdpfx Afoy D Adts Sjrt +++Extras++++ Automation: Handling unit / extraction robot included – Handling: LR 100-2300 Conveying equipment: roller conveyor included CE marking: available Complete maintenance and inspection history Full latest test report Incl. conveyor belt, incl. cage Machine with water battery Machine without material hopper Levelling elements EUROMAP 12 interface Electrics Schuko socket 10A CEE socket 16A Voltage: 400 V Frequency: 50 Hz Motor current: 80 A Warranty Warranty up to first commissioning Loading / Shipping Free loading onto buyer's truck or free delivery within Germany subject to freight reimbursement Available ex stock Hanover, Germany

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, EX-Trafire 30H Hand System starter 230V Plasma system Portable and powerful Cutting performance Cutting width (mm) (structural steel) 10+ Recommended (mm) 8 Piercing (mm) 8 Cutting current (A) 10-30 Duty cycle: 100% @ 21A - 88.4V 60% @ 25A - 90V 35% @ 30A - 92V Voltage 220-240 V Air flow (lpm/bar) 48/4.5 Pressure (max) (bar/psi) 10/145 Dimensions W x L x H (mm) 165 x 480 x 290 Includes hand torch FHT-EX 30H and wear parts Ledpoz D Aiwofx Af Sert Starter kit

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 178501, turning length: 1,000 mm, travel distance X-axis: 280 mm, travel distance Z-axis: 700 mm, total height: 2,000 mm, total length: 5,000 mm, total width: 2,200 mm, overall weight: 5,000 kg, controller manufacturer: OKUMA, controller model: OSP-P 300 L, input voltage: 400 V, input frequency: 50 Hz, input current: 154 A, nominal power (apparent): 29 kVA, Equipment: chip conveyor, OKUMA LB 3000 EX 2 - M C 1000 CNC lathe - includes driven tool stations and a C-axis Ljdpfx Afozxyd De Sort The machine is equipped with a tailstock, a 12-position tool turret, and a three-jaw chuck, diameter: 250 mm, manufacturer KITAGAWA, including a chip conveyor. FCA D-63843 Niedernberg

Condition: used, axle configuration: 2 axles, first registration: 02/2006, loading space length: 6,780 mm, loading space width: 950 mm, loading space height: 300 mm, total width: 2,550 mm, suspension: air, tire size: 215/75R17.5, color: other, Year of construction: 2006, LECINENA SR-2E BOAT TRAILER Loading platform 6.78 + 4.27 m, extendable 6x boat support legs = Further information = Tire size: 215/75R17.5 Suspension: Air suspension Front axle: Double tires; tire tread depth, left inner: 50%; tire tread depth, left outer: 50%; tire tread depth, right inner: 50%; tire tread depth, right outer: 50% Rear axle: Double tires; tire tread depth, left inner: 50%; tire tread depth, left outer: 50%; tire tread depth, right inner: 50%; tire tread depth, right outer: 50% Unladen weight: 5,560 kg Payload: 11,440 kg GVWR: 17,000 kg APK (Technical Main Inspection): valid until 03/2027 Ljdpfx Afjzibxqj Ssrt Model number: LECINENA SR-2E / BOAT TRAILER / = Company information = ALL PRICES ARE NET FOR EXPORT (Joris Versteijnen NL-DE-GB, Wouter Greutink NL-DE-GB-ES-IT). We speak Russian. We make every effort to provide accurate information. However, no rights can be derived from the information provided.

Condition: used, Year of construction: 2024, battery capacity: 240 Ah, battery voltage: 80 V, total length: 1,023 mm, total width: 710 mm, total height: 402 mm, overall weight: 750 kg, No. 10039 Ledpfxez Dvn Ts Af Sjrt Forklift Battery / Traction Battery EnerSys Hawker Water Less 80V 4 PZM 240 Unused, year of construction 2024, in new condition According to our customer / the previous owner, the battery is fully functional and can be viewed on site Lead-acid traction battery Hawker Water Less system Cell design PzM With central water refilling system / hose system Installed in battery tray Suitable for industrial trucks / electric forklifts Nominal voltage 80 V Capacity 240 Ah (C5) Number of cells 40 pcs. Electrolyte volume 96 l Battery dimensions approx. 1023 x 710 x 402 mm LWH Transport dimensions approx. 1200 x 800 x 600 mm LWH Weight approx. 750 kg Sale on behalf of customer, ex location near 69123 Heidelberg, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex location

Condition: good (used), functionality: fully functional, Year of construction: 2002, • 4 new EDI cells MK3 are available. Lrodpfx Aewy Uu Asf Sjt • 7 EDI stations, each with 4 EDI cells MK3, will be dismantled.

Year of construction: 2008, operating hours: 16,000 h, condition: good (used), functionality: fully functional, OKUMA SPACE TURN LB3000 EX Lathe Year: 2008 Control unit: OSP-P200L Maximum workable length*1 (capacity): 500 mm Maximum workable diameter: 400 mm Bar feeder included, Model: IEMCA MASTER 880 33 P/R Chip conveyor with belt Software for gear cutting included, along with the corresponding gear-generating tool (as shown in the attached photo). Lrodpfx Afsz Aku Io Sst

Condition: used, Year of construction: 2013, functionality: limited functionality, overall weight: 18,500 kg, We are offering this used KraussMaffei 200-750 EX injection molding machine, manufactured in 2013. Type: KM 200-750 EX International size designation: KM 750 EX/200 Year of manufacture: 2013 Machine No.: 61019432 Machine weight: 18,500 kg Please note: The machine is sold without machine conformity, as the safety door on the operator side is missing. The control panel is mounted on the rear of the machine. If you have any questions or require further information, please do not hesitate to send us a message or call us. Ljdjzxk Ruspfx Af Sort

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, 1. Waterjet cutting system with accessories, year of manufacture 2005, machine number: 95 246, Model 4060D, including: 2. Machine details: - NC 4060 D (Duplex with 6 cutting heads for abrasive cutting) - 1 x cutting table: 4200 x 6700 mm - X-axis travel: 2750 mm - Y-axis travel: 6470 mm - Z-axis travel (height): 250 mm - Positioning accuracy (X/Y): +/- 0.075 mm/m - Repeatability (X/Y): +/- 0.05 mm - Feed rate X: 10,000 mm/min - Feed rate Y: 10,000 mm/min - Feed rate Z: 4,000 mm/min Technical specifications: - 1 x Fanuc GE 300 i (NANO CNC) SYSTEM Control functions • 15-inch color LCD display (resolution 1024 x 768) • Machine control panel • 1.5 GHz Pentium III processor • Vertical and horizontal soft key bars • Slim operator panel with QWERTY keyboard • 40 GB program storage (hard disk) • 2 MB RAM for part programs • Windows 2000/XP operating system • Hand-held control unit (remote control) for easy axis positioning – 1 x MPG unit – 6 x WJS standard cutting heads mounted on holders (2 x 3 pieces) – 6 x SM 3000 abrasive metering units – 1 x IGEMS Standard or Professional – 1 x documentation – 2 x abrasive storage tanks, 1,500 l each – 1 x sludge removal system, 3 x diaphragm pumps – 1 x wastewater tank 1,500 l – 1 x cascade tank – 1 x new stainless-steel cutting tank (4 x 6.7 m) - 10 m high-pressure hoses with fittings - 1 x KMT high-pressure pump, 100 HP, 4,100 bar, only 9,500 operating hours - Installation and maintenance by WJS personnel Machine connections: Electrical connection: 3 x 400 V+N+PE, 25 A, 50 Hz Compressed air supply: 600 l/min Lrodsxgumcopfx Af Set Air pressure (technically dried): 6.5 bar

Condition: used, This listing is for the Veolia/Elga PC1ANRXM2 Purelab Chorus The unit is in full working condition and is ready for immediate release The Veolia ELGA PURELAB Chorus 1 Complete is a high-performance water purification system engineered for laboratories demanding the highest water purity. It is ideal for supporting analytical research, quality control (QC) testing, and pharmaceutical manufacturing processes, delivering reliable Type I ultrapure water. Key Specifications Water Quality: 18.2 MΩ·cm resistivity (Type I) Flow Rate: Up to 20 litres per hour Lrsdpfxjxv A Uas Af Sst Features: Advanced PureSure® deionization for consistent water quality Fully recirculating system to maintain microbial purity Real-time TOC monitoring to ensure organic purity Integrated filtration for endotoxins, proteins, particulates USB data capture for performance validation Optional ELGA Biofilter for biologically active impurities Cost-effective design supporting QC testing to validate drug purity in pharmaceutical manufacturing Consumables engineered to minimise cost and environmental waste Ideal Applications Analytical Research Life Sciences Pharmaceutical QC Testing Glassware Washing and Ultrapure Feed Systems

Condition: new, Year of construction: 2021, machine/vehicle number: 2200383125, Sales exclusively to customers with a German billing and delivery address! Process chiller / refrigeration unit / chilled water system, air-cooled, Type: TAEevo Tech 1002 P3-20-OFF MTA S.p.A. TAEevo Tech 1002 P3-20-OFF are air-cooled compact water chillers suitable for outdoor installation (from -20°C to +46°C). Includes crankcase heater, phase monitoring, buffer tank 950 liters, built-in P3 circulation pump, and winter package -20°C (variable speed control of the fans, condenser pressure control). Chilled water outlet temperatures from -10°C to +30°C can be adjusted. Cooling capacity kW 200 [682428 Btu (IT)/h] Chilled water temperature outlet/inlet (°C): 7 / 12 Flow rate (m³/h) 34.2 Available pump pressure (bar) 3.09 Ambient temperature (°C) 32 Refrigerant R 410A Electrical data: Voltage V 400, Frequency Hz 50, Phases Ph 3, Max. power consumption (kW) 99 Max. current (A) 167 Starting current circuit (A) 371 Protection class: IP54 Dimensions: Length (mm) 4655, Width (mm) 1250, Height (mm) 2155 Weight (kg) 2998 Connection Victaulic DN 100 Serial No.: 2200387535 Year of manufacture 2022 Condition: Visually 2, Technically ok Used Price: on request in Euro (plus VAT ex Nettetal) – 3 months warranty Used machines may have visual imperfections due to their use. (Subject to technical changes and prior sale!) Location: MTA Deutschland GmbH, 41334 Nettetal Ljdpfx Aolgzcdef Ssrt

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, CNC turning machine Okuma LB 3000 EX II MYW 800 Control system: OSP-300L Year of manufacture: 2014 Internal machine number: 75 Distance between centers or spindle noses: 1085 mm Turning diameter over slide/bed: 340 / 580 mm Travel in X-axis: 260 mm Travel in Y-axis: 115 mm Travel in Z-axis: 1,010 mm Travel in C-axis: 360 mm Travel in W-axis: 895 mm Spindle bore: 72 mm Main spindle speed: 45 - 5,000 rpm Counter spindle speed: 45 - 6,000 rpm Tool holder: BMT Tool turret: V12 (powered) Equipment: Chip conveyor Touch probe Parts catcher Lredezz Ihvjpfx Af Set Bar feeder IRCO MUK 7012 Bar length: 1250 mm Coolant system TM 24, 8 bar