Used Mütek Mfp 30 for sale (24,688)

Condition: as good as new (ex-display), Year of construction: 2025, Machine for sale at a special price Another machine, available immediately (ex works Neckartailfingen) * Includes a 1-year warranty. Your advantages: + Very robust, simple technology + Excellent price-performance ratio + Suitable for continuous operation + Long-standing, well-functioning/established machine Includes control cabinet with timer operation The press is switched on manually and then runs until the set time on the timer has elapsed (e.g., 4 hours). Then, the press switches off. Technical data: Briquet dimensions: approx. 30 x 30 mm (square), Briquet length: 5-40 mm *material-dependent Throughput: up to a maximum of 20 kg/h *material-dependent Machine dimensions: approx. 137 x 75 x 148 cm (length x width x height), Ijdpfxjd Nnwlo Aa Esid Machine weight: approx. 250 kg, Silo capacity: approx. 250 liters, Motor: 2.2 kW, 400 V - 50 Hz, Noise emission: 62 dB, Raw material requirements: - Wood chips and dust smaller than 15 mm in length - Moisture content less than 18% ATRO - Sand, stones, metals and minerals increase wear --- Options available at an additional cost: - Timer function + €490 net Machine is started manually and switches off automatically after the set time X. - Level sensor for automatic operation + €1450 net Press starts and stops automatically * NEW!!! Also available in 230 volts, Motor then 3 kW instead of 2.2 kW, Additional cost + €890 net (delivery time then approx. 8 weeks) - Special dies + €2,950 net ---

Condition: as good as new (ex-display), Year of construction: 2026, Machine for sale at a special price Machine available immediately (ex works Neckartailfingen) Demonstration machine Your advantages: + Very robust, simple technology + Excellent price-performance ratio + Suitable for continuous operation + Long-standing, well-functioning/established machine Includes control cabinet with timer operation The press is switched on manually and then runs until the set time on the timer has elapsed (e.g. 4 hours). Then the press switches off. Technical data: Briquet dimensions: 30/35 mm (square) Briquet length: 5-35 mm *depending on the material Throughput capacity up to a maximum of 25 kg/h *depending on the material Machine dimensions approx.: 137 x 75 x 148 cm (length x width x height) Machine weight: approx. 250 kg Capacity of the hopper: approx. 250 liters Motor: 2.2 kW, 400 V - 50 Hz Noise emission: 62 dB Requirements for raw material: Iiedofci D Aopfx Aa Esd -Wood shavings and dust smaller than 15 mm in length -Moisture content less than 15% ATRO -Sand, stones, metals, and minerals increase wear --- Options available at an extra cost: -Timer function + €490 net Machine is started manually and switches off automatically after a set time X. -Level sensor for automatic operation + €1,450 net Press starts and stops automatically * NEW!!! Also available in 230 volts, Motor then 3 kW instead of 2.2 kW, Additional cost + €690 net (delivery time then approx. 8 weeks) ---

Condition: good (used), functionality: fully functional, The conveyor belt from MFP is for sale; here are some technical details: The conveyor belt has been newly installed and comes with an FDA certificate. The guide rails are made of stainless steel. The entire interior is fitted with a strip, making it well-suited for small parts. Rise: 450 mm Iiedezlxifspfx Aa Eed Incline length: 2300 mm Working width: 180 mm Cleats: 30 mm high, spaced 300 mm apart Overall width: 340 mm Mobile Belt speed: constant 16 m/min, but can be equipped with a frequency converter for approximately €480.

Condition: as good as new (ex-display), Demonstration unit with 7 operating hours immediately available (ex works Neckartailfingen) Shredder MRZ 830 Commodity code: 84659600 Year of manufacture: 2023 Infeed opening 800x1000 mm Motor: 22 kW; 400 V - 50 Hz - 3 phase Blades: multiple-rotation hydraulically actuated slide Screen size selectable (10 - 40 mm) Weight approx. 1,600 kg Dimensions (l x w x h) approx. 2290 x 1420 x 1750 mm Turbo coupling Standard equipment includes: Ijdpfxev Sqrpo Aa Ejid - automatic star/delta start - fast hydraulics - auto. OFF when rotor is idling - speed 70-90 rpm for high throughput - cycle control to avoid idle times - performance-enhancing step control of the hydraulic slide - Pertinax guides for hydraulic slide - vibration-dampening machine feet - CE compliant The shredder is designed for shredding natural wood, chipboard, and MDF, as well as other materials after testing and approval by the manufacturer. Included: - Shredder raised by 30 cm (preparation for conveyor belt) Additional shredder options: - Articulating conveyor belt + €8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2000 mm + - 100 mm - Overband magnet + €6,780 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) Requirements for the raw material: - The moisture content (as received) must be below 30%, - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear.

Condition: new, Year of construction: 2026, production time appr. 4 months * for suction perception, see picture 4 and 5 Tariff number: 84659600 Main motor: 55 kW; 400 V - 50 Hz - 3 ph including turbo coupling, Hydraulic motor: 2.2 kW, 400 V - 50 Hz - 3ph Knife: 76 pieces, rotatable Knife size: 35 x 35 x 20 mm Rotor diameter: 360 mm Control: PLC Siemens S7-1200 Funnel opening approx. 1530 x 1235 mm Hopper volume approx. 2.5 square meters hydraulically operated slide Screen perforation: 10 - 30 mm Extraction nozzle Ø 200 mm Weight approx. 4,500 kg Dimensions (lxwxh) approx. 2765 x 2520 x 1730 mm Iiodpfod Hkqhsx Aa Eed Turbo coupling Included as standard: - V-rotor for other throughput - 2nd row of knives on the rotor - Control cabinet with Siemens PLC control - automatic star / delta start - fast hydraulics - Automobile. OFF when the rotor is idling - Speed ​​70-90 rpm for high throughput - Clock control to avoid idle times - Performance-increasing step control of the hydraulic slide - Pertinax guides for hydraulic slides - anti-vibration machine feet - CE conformity The shredder is for shredding natural wood, chipboard and MDF board other materials after testing and approval by the manufacturer Recognition from the raw material: - The moisture content (atro) must be below 30% - Metals and mineral impurities such as sand, stones, etc. Interests to interests wear

Condition: as good as new (ex-display), Year of construction: 2024, Special price: €29,970 net One machine is currently available for immediate delivery. This machine is ideal for shredding bulky, lightweight aluminum chips or turning chips. Not suitable for heavier aluminum parts. Included: + Optimized cutting geometry + Adapted slide control + Load-dependent controlled hydraulic slide Iiedpfxogmh H To Aa Esd (which presses the chips against the cutting mechanism) Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Knives: 40x40mm, multi-rotatable Rotor diameter: 260 mm Control: Omron PLC Cutting mechanism opening: 600 x 800 mm Hopper volume: approx. 0.6 m³ Hydraulically actuated slide Screen size selectable (15 - 40mm) Suction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (l x w x h) approx. 1737 x 1167 x 1650 mm The following options are available at an extra cost: - Raise the shredder by 30 cm (preparation for conveyor belt) + €2,990 net - Inclined conveyor belt (discharge height approx. 220 cm) + €9,770 net - Overband magnet + €6,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) We would be happy to provide a free test with your material. We invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material via a freight forwarder, and we will document the test with photos and videos.

Condition: new, Year of construction: 2026, Production time appr. 4 months Our best-selling briquetting press series + Tried and tested, simple technology for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several hundred machines in use with satisfied customers Iiodechqxxepfx Aa Eod + Good price performance ratio Throughput approx. Up to 200 kg per hour * strongly dependent on the material. - in the last test with aluminum granules smaller than 5 mm - approx. 186 kg per hour + the pressed emulsion. - in the last test with aluminum chips smaller than 18 mm - approx. 120 kg per hour + the pressed emulsion. Technical specifications: Motor: 7.5 KW + 0,55 kW Cooler 400 volts / 50 Hz / 3-phase, Front bush: 125 mm, Briquette stroke max .: 100 mm, Briquette stroke opt .: 80 mm, Pump: 80 liters, Storage container approx. 0.5 qbm content (expandable), Diameter: 1200 mm, with agitator discharge, Hydraulic unit complete with oil tank 220 liters Dimensions approx. 2095 x 1600 x 1310 mm lxwxh, Weight 1370 kg, Automatic on-off switching via level indicator CE compliant. . Requirements for the raw material: - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of magnetic metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: as good as new (ex-display), Year of construction: 2025, Demonstration machine with approximately 9 operating hours Another machine, available immediately (ex works Neckartailfingen) *Options available at an extra charge - see below Included: + Profile rotor for higher throughput We would be happy to provide a free test with your material. We invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material via a freight forwarder, and we will document the test with photos and videos. Motor: 18.5 kW; 400 V - 50 Hz - 3-phase Knives: 15 pieces, reversible Option: double knife row + €995 net Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Cutting chamber opening: 630 x 820 mm Hopper volume: approx. 0.6 m³ Hydraulically actuated slide Screen mesh size as desired (10 - 40 mm) Suction nozzle Ø 160 mm Weight: approx. 1,300 kg Dimensions (L x W x H): approx. 1737 x 1167 x 1650 mm Moisture content: < 30% (dry basis) . Standard included: - V-rotor for maximum throughput - Control cabinet with Siemens PLC control - Automatic star/delta start - Fast hydraulics - Auto. OFF when the rotor is idle - Speed 70-90 RPM for high throughput - Cycle control to avoid idle times - Performance-enhancing stepped control of the hydraulic slide - Pertinax guides for hydraulic slide - Vibration-damping machine feet - CE compliant . Iijdjb Ny Eyopfx Aa Eed Optional shredder features at an extra charge: - Raise the shredder by 30 cm (preparation for a conveyor belt) + €2,080 net - Eco-rings: + €1,980 net (recommended for more than 20% hardwood) - Double knife row + €995 net - Special scraper + €990 net (recommended when shredding veneer or paper, or items with a material thickness of less than 3 mm) - Articulating conveyor belt + €8,770 net Angle: adjustable from 0-60 degrees Discharge height: approx. 2000 mm - Automatic overband magnet + €5,980 net Alternatively, a fixed magnet block above the conveyor belt for regular manual removal + €990 net (in case of low metal content) - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) alternatively, manual start and stop of the belts + €595 net . Requirements for the raw material: - The moisture content (dry basis) must be below 30% - Installation temperature: temperature-controlled room at a minimum of +5°C - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Condition: new, Year of construction: 2026, Your advantages: + extremely large cutting unit opening with 1300x1200mm + special rotor suitable for hardwood and softwood + Energy-efficient and powerful with 37 kW at start-up Technical specifications: Colour: grey / blue Feed opening (mm): 1,300 x 1,200 Hopper capacity (cbm): 1.6 m³ Rotor diameter (mm): 368 Rotor speed (rpm): 65 - 125 Power requirement (kW): 37 Screen perforation (mm): 30 - 50 mm - selectable Tools: 37/70 knives Extraction nozzle Ø (mm): 200 mm Dimensions: 2430x2410x1735 mm (lxwxh) Weight (approx. Kg): 3,920 Optional for a surcharge: * to shred veneer or paper (anything thinner than 3 mm) - we recommend a segment floor. The machine in preproduction has not yet installed this. Special option at an additional cost. - 2nd row of knives, for up to 30% more throughput - Fast hydraulics, for increased throughput - Preparation for conveyor belt removal - conveyor belt - HAWK-EYE overbelt magnet Iedpsgbkkrjfx Aa Esid --- Optimal pallet size with the option slide extension = 1200x1400 (option slide extension, the cutting unit opening 1300x1700 surcharge + 12,975.00) * is associated with significantly longer production time. * larger machines on request --- Requirements for the raw material: - The moisture content (atro) must be below 30% - The loading must be free of metals and mineral impurities. This can result in damage to the tools and / or increased wear

Condition: as good as new (ex-display), Year of construction: 2024, Special machine for shredding plastics Base machine from €24,990 net Well-suited for shredding: - Paper, cardboard, pipes, profiles, boxes, canisters, buckets, cans, sections of wooden pallets, etc. - Semi-rigid thermoplastics such as PVC, PP, PE, PS, PU, PET Includes: - Special rotor with embedded blades (reduced load absorption), - Small cutting gap between blade and counter-blade Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Control: PLC Cutting unit opening (top) 600 x 800 mm The parts should be a maximum of approx. 500x500 mm *the height is less relevant Hydraulically operated slide Screen size as required (25 - 40mm) For plastics, coarser screens are recommended (30-40 mm) *If you want to shred finer, a two-stage shredding process with a downstream granulator type MVZ (screens 5-15 mm) is recommended. Suction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (l x w x h) approx. 1737 x 1167 x 1650 mm Further options available at an extra charge: - Raise shredder by approx. 25 cm (preparation for conveyor belt removal) + €1,980 net - Inclined conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €5,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) - Alternatively, manual start and stop on the conveyor belt + €595 net Requirements for the raw material: - The moisture content (as received) must be below 25% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear. We would be happy to offer a free test with your material. We invite you to visit us in Neckartailfingen for this purpose. It is also possible for you to send us your material by freight forwarder, and we will document the test with photos and videos. --- *only for brittle plastics with medium hardness, *not for elastic or extremely hard and heavy plastics - this would affect the durability of the system. Iiodpfx Aod H R Sxea Eod --- Optionally, the next larger machines would be available: Base machine: Shredder MGZ 830 K-S - 18.5 kW Cutting unit opening (top) 800 x 1,000 mm The parts should be a maximum of approx. 720x700 mm *the height is less relevant from €39,995 net * Options depending on effort Base machine: Shredder MGZ 1030 K-S - 22 kW Cutting unit opening (top) 1,000 x 1,000 mm The parts should be a maximum of approx. 900x700 mm *the height is less relevant from €49,975 net * Options depending on effort Base machine: Shredder MGZ 1330 K-S - 37 kW Cutting unit opening (top) 1,300 x 1,200 mm The parts should be a maximum of approx. 1,200x700 mm *the height is less relevant from €79,975 net * Options depending on effort

Condition: like new (used), functionality: fully functional, Year of construction: 2025, operating hours: 55 h, Machine with special rotor available immediately Advantages: + special rotor with reduced blade overhang, suitable for hard and soft materials + 22 kW motor + effective square blades *for pallets: up to a maximum of 10 pallets per hour *dependent on screen size and material. With smaller wood residues, significantly more. Motor: 22 kW; 400 V - 50 Hz - 3 phase, Screen: 15/20 mm or as agreed (10 to 40 mm possible) hydraulically operated slide Screen opening currently (15/20 mm) *can be exchanged Extraction nozzle Ø 200 mm. Feed opening 1000x1000 mm Dimensions: 2000x1800x1645mm Example image above: color of the system may vary Weight: 1920 kg. Iodjx Af Rdjpfx Aa Ejid Included as standard: - Control cabinet with PLC control - automatic star/delta start - fast hydraulics - auto. OFF when the rotor is idle - speed 70-90 rpm for high throughput - cycle control to avoid idle times - performance-enhancing step control of the hydraulic slide - Pertinax guides for hydraulic slide - vibration-damping machine feet - CE compliant The following options are available at an extra cost: - Raise shredder by 30 cm (preparation for conveyor belt) + €2,480 net - Inclined conveyor belt (discharge height approx. 220 cm) + €12,980 net - Overband magnet + €6,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) - extended feed hopper 1500x1500 mm + €3,480 net Requirements for the raw material: - The moisture content (as received) must be below 25% - The feed must be free of metals and mineral contaminants. Damage to the tools and/or increased wear may result.

Condition: as good as new (ex-display), Year of construction: 2025, Special price for our demonstration machine Another machine, available immediately (ex works Neckartailfingen) Approx. 8 operating hours. Suitable for shredding residual wood of all kinds, including pallet sections. Pallets must be prepared with a saw or chainsaw so that they fit upright into the hopper – see image 2. Ideally, the dimensions should be approximately 40x20x20 cm so that the wood can lie flat on the sliding bed. This is when the machine operates most effectively. A hydraulic slide runs along the bottom of the shredder, pressing the wood against the rotor depending on the load. The material is shredded until it passes through the screen basket. Throughput rate up to 200 kg per hour *depending on the screen and how well the material is prepared. *Conveyor belt and overband magnet available at an extra charge. + Powerful 18.5 kW motor, + Concave blades, + Large high-performance gearbox, + Special, load-dependent slide control, Commodity code: 84659600 Motor: 18.5 kW; 400 V - 50 Hz - 3 ph. Blades: 15 pieces, can be rotated multiple times Optional double blade row + €995 net Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Cutting unit opening 630 x 820 mm Filling volume approx. 0.6 m³ Hydraulically operated slide Screen hole size selectable (10 - 30 mm) Suction nozzle Ø 160 mm Weight approx. 1,300 kg (depending on accessories) Dimensions (l x w x h) approx. 1737 x 1167 x 1650 mm Moisture content: < 30 % dry basis Standard features include: - V-rotor for maximum throughput - Control cabinet with Siemens PLC control - Automatic star/delta start - Fast hydraulics - Auto. OFF when the rotor is idling - Speed 70-90 rpm for high throughput performance - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant - MADE IN GERMANY Options for shredder: - Raise the shredder by 30 cm (preparation for conveyor belt) + €2,080 net - Articulated conveyor belt + €8,770 net Horizontal part: 1200 mm Inclined part: 2500 mm Angle: Adjustable from 0-60 degrees Discharge height: approx. 2000 mm + - 100 mm - Overband magnet + €5,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) - Extend hopper + €940 net - Eco-rings: + €1,980 net (recommended for more than 15% hardwood) - Special scraper + €990 net (recommended for veneer or paper) - Double blade row + €995 net Requirements for raw material: - The moisture content (dry basis) must be below 30% Iiodpfjdwktkox Aa Eed - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear.

Condition: new, Year of construction: 2025, The ideal machine for shredding hardwood and softwood. Another machine, available immediately (ex works Neckartailfingen). Motor: 18.5 kW; 400 V - 50 Hz - 3 phase, Knives: 14 + 2 pieces, 40x40mm, can be rotated multiple times, Rotor diameter: 260 mm, Control: Omron PLC, Cutting chamber opening: 600 x 800 mm, Hopper volume approx. 0.6 m³, Hydraulically operated slide Screen size optional (12 - 40mm) Suction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (l x w x h) approx. 1737 x 1167 x 1650 mm The following options are available at an extra cost: - Additional knife row + €1,990 net (28 instead of 14) - Surcharge for four-sided segment bottom + €2,170 net (prevents the slide from jamming. Recommended for materials with a thickness of less than 3 mm) - Raise the shredder by 30 cm (preparation for a conveyor belt) + €1,980 net - Inclined conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €5,980 net - Control system for conveyor belt and overband magnet + €2,750 net (start and stop synchronized with the shredder) - Special bearing + €1,540 (rarely needed. Enclosed, even more stable rotor bearing. Possibly worth considering for sieves smaller than 15 mm or with a high proportion of fine material. If the bearings are lubricated with grease, this is not necessary if operated approximately every 2 weeks) Requirements for the raw material: - The moisture content (dry basis) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear. Iisdpfx Aod E R D Soa Eod We would be happy to offer you a free test with your material. We invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material by freight forwarder, and we will document the test with photos and videos.

Condition: as good as new (ex-display), Year of construction: 2025, showroom machine machine available Advantages: + special rotor with reduced knife protrusion + Motor 22 kW + effective square knife * for pallets: up to 10 pallets per hour * depending on the sieve and material. With smaller residual wood, significantly more. Engine: 22 kW; 400 V - 50 Hz - 3 ph, Sieve: 15/20 mm hydraulically operated slide Current screen perforation (15/20 mm) * can be exchanged Extraction nozzle Ø 200 mm. Feed opening 1000x1000 mm Dimensions: 2000x1800x1645mm Isdpfedv Eu Hex Aa Esid Example image above: The color of the system may vary Weight: 1920 kg. Included as standard: - Control cabinet with PLC control - automatic star / delta start - fast hydraulics - automobile. OFF when the rotor is idling - Speed ​​70-90 rpm for high throughput - cycle control to avoid idle times, - performance-increasing step control of the hydraulic slide, - Pertinax guides for hydraulic slides, - vibration-damping machine feet, - CE conform. The following options are available at an additional cost: - Additional row of knives + € 2,790 - segment bottom + € 6,890 (recommended for materials with a wall thickness thinner than 3 mm) - Special K-rotor storage + € 3,480 If necessary, consider shredding plastic with sieves smaller than 15 mm or with a lot of fines. If the bearings are lubricated with grease every approx. 4 weeks in operation, this is not necessary) - Raise the shredder by 30 cm (preparation for conveyor belt) + € 2.480 net - Angled conveyor belt (discharge height approx. 220 cm) + € 12.980 net - Overbelt magnet + € 5.980 net - Control conveyor belt and overbelt magnet + € 2.750 net (Start and stop synchronized with the hacker) - Exhibition hopper 1500x1500 mm + € 3.480 net Requirements for the raw material: - The moisture content (atro) must be below 30% - The loading must be free of metals and mineral impurities. This can result in damage to the tools and / or increased wear

Condition: new, Year of construction: 2026, Single-shaft shredder MRZ 530 Iodpfxed Db N Ie Aa Esid Included: + Profile rotor for increased throughput Options: Double knife row + €895 net Veneer and paper scraper + €970 net * recommended for extremely thin materials with a thickness of less than 3 mm Our mütek single-shaft shredder MRZ 530 shreds a wide variety of materials, such as residual wood of all kinds, softwood, chipboard and hardboard, pallets, construction timber, demolition wood, carpet, cables, paper, cardboard and plastics. The machine is characterized by a robust design, which guarantees consistent quality in continuous operation. We would be happy to provide you with a free test using your material. We invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material by freight forwarder, and we will document the test with pictures and videos. Machine data: Motor: 15 kW; 400 V - 50 Hz - 3 phase, Knives: multiple rotation, Rotor diameter: 260 mm, Control: Siemens S7-1200 PLC, Hopper (mm) 510 x 810 mm, Hopper volume approx. 0.4 m³, Throughput 1 - 5 hopper loads / h, Hydraulically operated slide, Screen size as required (10 - 40 mm), Suction nozzle Ø 160 mm, Weight approx. 1,000 kg, Dimensions approx. 1550 x 1100 x 1640 mm, Moisture content of the raw material: must be below 30% (oven-dry). Standard included: • Fast hydraulics • Profile rotor • Control cabinet with Siemens PLC control • Automatic star/delta start • Automatic OFF when the rotor is idle • Removable suction chute • Speed 70 - 100 rpm for higher throughput • Cyclic control to avoid idle times • Performance-enhancing step control of the hydraulic slide • Stable guides for the hydraulic slide Further shredder options: - Raise the shredder by 30 cm (preparation for conveyor belt) + €1,980 net - Inclined conveyor belt + €8,770 net Horizontal part: 1200 mm Ascending part: 2500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2000 mm + - 100 mm - Overband magnet + €5,980 net - Control of conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) Requirements for the input/raw material: - The moisture content (oven-dry) must be below 30% - Metals and mineral impurities such as sand, stones, etc. lead to increased wear.

Condition: new, Year of construction: 2026, Delivery time approx. 3-4 months Shredder MRZ 830 Commodity code: 84659600 Feed opening 800x1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3-phase Blades: multiple, rotatable Hydraulically operated slide Screen opening as desired (10 - 40 mm) Suction nozzle Ø 200 mm Weight approx. 1,600 kg Dimensions (l x w x h) approx. 2290 x 1420 x 1750 mm Turbo coupling Standard features include: - Automatic star/delta starter - Fast hydraulics - Auto. OFF when the rotor is idle - Speed 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing stepped control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant The shredder is designed for shredding untreated wood, chipboard and MDF boards, and other materials after testing and approval by the manufacturer. Additional shredder options: Iijdpfx Aed Dgw Usa Eed - Raise shredder by 30 cm (preparation for conveyor belt) + €2,140 net - Articulating conveyor belt + €8,770 net Horizontal section: 1200 mm Rising section: 2500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2000 mm + - 100 mm - Over-band magnet + €5,980 net - Control system for conveyor belt and over-band magnet + €2,750 net (Start and stop synchronized with the shredder) Requirements for the raw material: - Moisture content (as received) must be below 30% - Installation temperature: temperature-controlled room at a minimum of +5°C - Metals and mineral contaminants such as sand, stones, etc. will lead to increased wear.

Condition: new, Year of construction: 2026, The ideal machine for shredding softwood. Ijdpfx Aewzarcsa Ejid Motor: 11/15 kW; 400 V - 50 Hz - 3 ph, Rotor diameter: 260 mm, Hydraulically actuated pusher Screen perforation to choice (12 - 40 mm) Extraction port Ø 160 mm Weight approx. 1,100 kg Dimensions (LxWxH) approx. 1805 x 1118 x 1650 mm Colour: blue / grey Requirements for raw material: - Moisture content (atro) must be below 30% - Metal and mineral contaminants such as sand, stones, etc. lead to increased wear. We are pleased to offer a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material by freight and we will document the test with photos and videos.

Condition: used, Shredding Machine MGZ 1330, 37 kW Operating hours: 275 Included: - Second knife row - Fast hydraulics for increased throughput - Preparation for conveyor belt Iiodpfsx Tfdhjx Aa Eed Optional: - Conveyor belt with automatic metal separator Your advantages: + Extremely large cutting chamber opening; top: 1300x1200mm + Special rotor suitable for both hardwood and softwood + Energy-efficient and powerful, 37 kW start-up power Technical data: Feed opening, top (mm): 1,300 x 1,200 Hopper capacity (cbm): 1.6 m³ Rotor diameter (mm): 368 Rotor speed (rpm): 65 - 125 Power requirement (kW): 37 Screen hole size (mm): configurable Tools: 37/70 knives Extraction connection diameter (mm): 200 mm Dimensions: 2430x2410x1735 mm (LxWxH) Weight (approx. kg): 3,500 --- Feedstock requirements: - The moisture content (atro) must be below 20% - The feed material must be free of metals and mineral contamination. Damage to the tools and/or increased wear may result.

Condition: good (used), Bandall BA 24/15-30 Banding Machine One of the most recognizable banding machines in the world, a market leader. Manufactured by Bandall, the Netherlands. Isdpfx Aozlgd Doa Esid Machine in very good condition, recently serviced. Year of manufacture: 2016 The machine operates in manual or automatic mode. Production version, for heavy loads. The machine is mounted on a standalone frame with wheels for transport. Operates on jumbo rolls. After inserting the material, the machine wraps it with tape, compresses, and seals it, creating an elegant package. Ideal for wrapping business cards, leaflets, and other materials. Controlled via an LCD panel. Technical specifications: Tape width: 30 mm Performance: 36 cycles/min Machine opening dimensions: 320 x 160 mm A roll of film is included.

Condition: excellent (used), CATALOGUE NUMBER 7026 TECHNICAL DATA - feed opening width: 740 mm - feed opening height: 300 mm - shaft width: 780 mm - shaft diameter: 1000 mm - knife length: 780 mm - number of knives: 2 pcs - screen dimensions: 55x55 mm - from below: 4 toothed feed rollers - lower roller motor: 5.5 kW - from above: 3 toothed feed rollers - upper roller motor: 5.5 kW - belt feeder - belt feeder length: 4300 mm - belt feeder width: 600 mm - belt feed drive motor: 2.2 kW - main motor: 90 kW - reverse gear - auto-reverse Iedpfx Aaezcbyvo Eeid - overall machine dimensions (L/W/H): 4600x2350x1700 mm - overall feeder dimensions (L/W/H): 4550x980x970 mm - total weight: approx. 11,000 kg – German manufacture - auto-reverse (with adjustable setting) – used chipper, in very good condition Net price: 231,900 PLN Net price: 55,200 EUR Net price calculated at exchange rate 4.2 PLN/EUR (price may change with significant exchange rate fluctuations)

Year of construction: 2025, condition: new, functionality: fully functional, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Iedpfx Aeu Smd Eja Eeid Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: excellent (used), A robust machine designed for punching holes in steel, aluminum, and other metals. Thanks to its foot control, it provides convenient and safe operation. Its compact design makes it suitable for both a locksmith's workshop and a production facility. Technical specifications: Manufacturer: Mubea (Muhr und Bender) Model: KL30 Year of manufacture: 1975 Machine number: 38601 Country of manufacture: Germany (West Germany) Iisdjzkmi Dopfx Aa Esd Power supply: 3× 220/380 V Frequency: 50 Hz Motor power: 1.5 kW Rated current: 5.8 / 3.4 A Protection rating: IP44 Control: foot pedal Punching capacity: Ø 30 mm in sheet metal with a thickness of 8 mm Ø 20 mm in sheet metal with a thickness of 12 mm (Parameters correspond to the manufacturer's nameplate for a material with a strength of approximately 45 kp/mm².) Condition: Used machine. Visual condition matches the photos. Robust, heavy-duty industrial design. Ideal for locksmith workshops, steel structure production, and workshops involved in metalworking.

Condition: like new (used), functionality: fully functional, With this offer, you are purchasing a large format system/plotter ‘Canon imagePROGRAF TZ-30000’ in mint condition. Item for sale: 1 x Canon imagePROGRAF TZ-30000 incl. scanner Counter readings: Total: Approx. 262 m² Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. A test print can be seen in the photo. Iiodpfx Aasx Svrto Esd Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before shipping or collection. For more information, please feel free to contact us personally.

Condition: good (used), Com J240/30 Banding Machine on a Base One of the most recognizable banding machine manufacturers on the market, manufactured in Japan. The machine operates in manual or automatic mode. Production version, for heavy loads. The machine is mounted on a standalone structure with wheels for transport. Operates on jumbo rolls. After inserting the material, the machine wraps it with tape, compresses, and seals it, creating an elegant package. Ideal for packaging business cards, leaflets, and other materials. Technical specifications: Iodpfoziyr Nsx Aa Esid Tape width: 30 mm Performance: 26 cycles/min Dimensions of the banded product: 240 x 150 mm Made in Japan. Weight: 70 kg.

Condition: new, Year of construction: 2026, operating hours: 8 h, Actually one showroom machine available. Very robust machine with high pressing force - is also suitable for producing a salable briquette quality * depending on the material. The large press cylinder and the 80 mm briquette make this possible. Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Surcharge for cooling unit + € 4.995 net, (can also be retrofitted later) * cools the pressing tongs (important from 3.5 hours) and the hydraulic oil * Cooling device recommended for regular use of more than 3.5 hours at a time. Briquette diameter: 80 mm Iijdpfjxfwdox Aa Esd Front bush: 125 mm Briquette stroke max .: 100 mm Briquette lift opt ​​.: 80 mm Output (depending on material): up to 200 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter Motor power: 9.2 kW 400 volts / 50 Hz / 3 phases Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil volume: 220 liters Silo diameter: 1200 mm Silo content: approx. 1 qbm Pump: 75 liters Hydraulic pre-compressor Cooling pressing tongs option: yes, with special accessory coolable pressing tongs Hydraulic oil cooling option: yes Cooling of the pressing tongs and the hydraulic oil with cooling device (special accessory) Level monitoring option: yes Strand briquette option; yes (depending on material) Option of enlarged filling slide: yes, with special accessory enlarged filling slide CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear