Used Leveling Device for sale (16,438)

Condition: good (used), Level limit switch, level measuring device, sensor, switch, level transmitter, limit level detector, limit switch, level switch, level sensor, level evaluation unit, level indicator -Manufacturer: Endress+Hauser, level indicator unit, original packaging -Type: Silometer FMC 320 Nlodpfx Aszmuqnof Sog -Item No.: 922496-0500 -Voltage: 220 V -Cardboard dimensions: 125/90/H80 mm -Weight: 0.5 kg

Condition: good (used), Leveling device Nljdpfsd Scpdjx Af Seg -in: transport case -Dimensions: 240/170/H190 mm -Weight: 3.3 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1985, machine/vehicle number: 8444-08, workpiece length (max.): 6,000 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum edge length: 6,000 mm Maximum material thickness: 1.25 mm Mechanical cutting device Hydraulic unit Flow rate of gear pump: 14.5 l/min Operating pressure: 140 bar Maximum pressure: 210 bar Electric motor power: 3 kW Motor speed: 1,450 rpm Voltage: 380 V Frequency: 50 Hz Oil tank capacity: 30 l Pressure gauge diameter: 63 mm Pressure gauge display range: 0–250 bar Pressure switch: 90 bar Hydraulic components Gear pump CPL 9 DQ Intermediate flange L25-2/004 Elastic coupling G 228/2P Return filter Fill and vent filter Oil level indicator Drain plug Glycerine pressure gauge Valve block with pressure, flow control, braking, and solenoid valves Hydraulic cylinders Number of hydraulic cylinders: 8 Type: GHZ-50 × 225-S spec. Piston rod with external thread M20 Length: 20 mm Swivel bearing at the rear Nsdpfx Afjzy Ndco Selg Hydraulic motors Number of hydraulic motors: 4 Type: OMP 50 MACHINE DETAILS Control system Electrical machine control with operator panel (OP) Adjustable dwell times, angle ranges, and shutdown delays Variant control for different machine functions EPROM-based control Electrical supply Mains voltage: 380 V Frequency: 50 Hz EQUIPMENT Hydraulic unit OP-14 SM 8 hydraulic cylinders GHZ-50 × 225-S spec. 4 hydraulic motors OMP 50 Gear pump CPL 9 DQ Valve block with hydraulic valves Return filter Fill and vent filter Oil level indicator Glycerine pressure gauge Pressure switch Electrical OP control Hydraulic and electrical circuit diagrams

Condition: excellent (used), Tripod, height-adjustable Fitting thread: 1/2" Weight: 5 kg Includes carrying strap. Nlodpfjd Ey Abjx Af Sjg

Year of construction: 2018, operating hours: 8,580 h, condition: used, functionality: fully functional, machine/vehicle number: E21SI18102702508, This is a combination oven, model SCC 201 WE Elektro, from the premium manufacturer Rational. The unit has undergone a thorough inspection in our in-house workshop, has been fully refurbished, and is in perfect working order. The unit has accumulated 8580 operating hours. The recommended retail price is €21,940.00 (net) / €26,108.60 (gross). Njdpjz Etknofx Af Selg The stated price is gross, including 19% VAT. Service: We will gladly connect you with a certified Rational customer service representative throughout Germany. Are you looking for a specific Rational device model? Ask us; we have access to a wide range of used and new equipment. We will be happy to advise you on all device types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic, or iCombi Pro. Our used equipment service for you: 6-month warranty on all electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. High-quality branded equipment at fair prices. Professional refurbishment/inspection & expert cleaning. Checked and fully functional – or your money back. Flexible shipping or self-pickup options. Competent advice - before and after the purchase. Provision of operating instructions, wiring diagrams & spare parts. Inspection according to DGUV V3. This combination oven offers space for 20 x 1/1 GN containers. In automatic mode, the unit independently recognizes the ideal cooking process, the size of the food, the quantity being cooked, and the product-specific requirements for 7 applications (meat, fish, poultry, side dishes, egg dishes, baked goods, and finishing). Technical data: W x D x H: approx. 879 x 791 x 1782 mm Minimum door opening dimensions for transport WxH: 925x1900mm Power connection: V: 400 / kW: 37.0 / Hz: 50/60 Weight: approx. 268 kg Serial number: E21SI18102702508 Year of manufacture: 2018 Capacity: 20 x 1/1 GN or 40 x 1/2 GN Longitudinal insertion: 1/1, 1/2, 2/3, 1/3, 2/8 GN Servings per day: 150-300 Condition: Used, inspected, fully refurbished, in perfect working order. Additional information: In combination oven mode, 3 operating modes are available: steam (30°C to 130°C), hot air (30°C to 300°C), and combination (30°C to 300°C). Care Control - self-cleaning. Core temperature probe. Handheld spray nozzle with automatic retraction. 8.5-inch color display and touchscreen. 5 fan speeds programmable. Integrated, maintenance-free grease separation system. Automatic start time preselection. 7 cleaning levels for unattended cleaning - even overnight. Spraying can be adjusted in 3 levels - from 30°C to 260°C. 5 programmable fermentation levels. USB interface. Seamless, tub-shaped hygienic cooking chamber, rounded corners. Halogen cooking chamber lighting. Shipping: Delivery or self-pickup by arrangement. Worldwide shipping upon request. Shipping to islands or mountain stations only by arrangement. Subject to changes and errors. Do you have any questions, would you like advice, or would you like to see something on-site? You can reach us by telephone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is exclusively subject to our general terms and conditions (GTC).

Condition: good (used), Year of construction: 2001, Built in: 2001-2003 Size: max 290 x 420 x 65 mm; min 100 x 105 x 3 mm Speed: max 15.000 c/h Equipment gathering machine Njdpfxjiz Aibj Af Selg • chain tensioner • 12 stations • gatherer ZU 840 • 8 streamfeeder STA 840 • reject unit AS 840 controls • opticontrol signature image reader intermediate elements • reject unit • jogging element perfect binder • Copilot • Monitor control • 23 clamps • jogging station • resting table • fold pressing station • milling and roughening station • equalizing-leveling station • hotmelt spine gluing unit • hotmelt side gluing unit • 2 premelters • stream cover feeder • cover pressing station • smooth lay down device conveyor system • bypass for splitting saw splitting saw • turnover belt • connected with three knife trimmer • destacker • information three knife trimmer: HD 151 P compensating stacker • information compensating stacker: Müller Martini CB 16 standard accessories • pv pressure-vacuum pump • 1 set of electrical diagrams • 1 set of spare part catalogues • 1 set of tools further information • machine can be tested in production • condition: working condition

Year of construction: 2021, condition: excellent (used), functionality: fully functional, controller model: PLC Siemens S7, production capacity: 4,000 unit/h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Capacity: 4,000 bottles/hour Dimensions of screw cap: 30 × 10 mm Dimensions of PET bottle (20 ml): 26.05 × 48.38 mm MACHINE DETAILS Control system: PLC Siemens S7 Sorting hopper Height of transport chains: approx. 1,000 mm ± 50 mm Power consumption: 2.5 kW Voltage supply: 380/400 V Fuse rating: 16 A EQUIPMENT Centrifugal cap sorter made of stainless steel AISI 304 with cap level sensor Cap feed chute made of stainless steel AISI 304 with electronic cap jam detector Manual device for removing misaligned caps Pick-and-place system Capping heads with magnetic clutch and cap cone Bottle neck ring centering with spikes Frequency-controlled geared motor Special design of the height adjustment range for handling bottles outside the height adjustment range Anti-rotation device Protective device to cover the bottles Electric height adjustment of the capping head Axially adjustable worm Control cabinet Machine drive via Danfoss VLT 2800 frequency inverter Touch panel for operation FESTO pneumatics Diameter of the feed table: 800 mm Feed table with frequency inverter and separate drive Conveyor extension at the machine inlet: 500 mm Conveyor extension at the machine outlet: 200 mm Sensor control Mechanical cap feeding system with floor-mounted storage container Nljdpfx Aszyihhsf Sog Vertical conveyor made of stainless steel AISI 304 with cap conveyor belt

Condition: like new (used), Year of construction: 2025, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 1630, overall weight: 7,800 kg, warranty duration: 6 months, power: 85 kW (115.57 HP), Complete production line for sale, based on a Di Più BRIK MB100 briquetting press (complete production line). Fully refurbished DI PIU BRIK MB100 machine (factory-refurbished in 2025), ready for immediate operation. The machine is designed for high-capacity briquetting and is suitable for demanding industrial applications. The machine has approximately 2,000 operating hours. It has been newly refurbished at the Di Più factory: all vital components have been replaced, including all cables, electrical wiring, and required electrical equipment. The machine is brought to as-new condition and comes with a 6-month Di Più factory warranty. The machine can produce briquettes with or without a hole, with a diameter of 90mm to 110mm, using soft or hard wood, in either round or square shapes. Machine inspection is possible at the factory in Italy: Di Più Systems Srl, Via dell’Innovazione 11, 36042 Breganze (VI), Italy. The Di Più BRIK MB100 mechanical briquetting press is an automatic machine for compacting wood, sawdust, and other waste materials into wooden briquettes. The ideal humidity of the input material is between 8% and 12%, and the particle size between 1mm and 12mm. Technical data: - Production capacity: 1,300 – 2,300 kg/h (for sawdust density 160–200 kg/m³) - Briquette diameter: 90 – 110 mm - Main motor power: 75 kW - Total installed power: 98 kW - Piston compression pressure: 2,000 – 2,500 kg/cm² - Vertical screw with gearbox: 5.5 kW - Oil pump: 1.5 kW - Oil pump for extruder head closure: 1.5 kW - Feeder with screw and adjustable speed: 1.5 kW - Oil system for bronze bearing lubrication: 100 liters - Briquette output monitoring sensor (automatic shutdown when material supply runs out) - Safety covers for moving parts - Oil pressure sensor - Control cabinet - Input material storage hopper (buffer) - Level sensor for feed system monitoring - Machine weight: approx. 7,800 kg The machine is equipped with all necessary accessories for complete operation and integration into a briquetting line: ACCESSORIES – MB100: Nlsdpowrp Emjfx Af Ssg - Dosing silo: Made of heavy-duty steel. Diameter: 1,500 mm, height: 1,000 mm. Equipped with a rotary cutter with 2.2 kW gearbox, mounted on a robust steel frame. Material supply is monitored by a level sensor. - Briquette cooling line after extrusion, total length 20 meters - Automatic briquette cutting saw - The saw automatically cuts briquettes to the operator's preset lengths - Device for producing briquettes with a hole - Machine head cooling system with ice water - The system produces 50 liters/min of ice water for effective briquetting head cooling. - Air-cooled water chiller with hermetic scroll compressors, microprocessor control, and a large energy storage tank with an immersed water-to-refrigerant heat exchanger. - The heat exchanger is a high-efficiency fin-pack type, made of copper pipes and aluminum fins. - Water tank with a capacity of 800 liters - Water feed pump (50 l/min – 20 m.w.c. – 0.55 kW) with three-circuit DN25 valves for regulating cooling water temperature at the briquetting head - Digital electronic temperature controller connected to an NTC sensor (measuring element d.6 × 52 mm, IP68, AISI 316) OPTIONAL: NOVAPAC packaging machine Possibility to purchase an additional NOVAPAC packaging machine, fully compatible with the Di Più BRIK MB100 and other machines. An ideal solution for automatic packaging immediately after briquetting. Year: 2013 Price for Novapac: €19,000 Equipment visible in the las

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, CLEANROOM - ISO 8 | Cleanroom requirements ISO Class 8 | ISO Cleanroom Class 8 | Cleanroom classification. In order to achieve an ISO 8 air purity class in a Cleanroom, several levels of air filtration are usually used (e.g. G4 pre-filter, F9 filter, H13 final filter). Air movement in the room is non-unidirectional (there is a mixing of "clean" air supplied to the room with "dirty" air present in the room). Air vents in the ISO 8 room are placed on the walls. The required number of air exchanges per hour will depend on the nature of the activities conducted in the room and the number of personnel present, but the goal could be to provide 10-40 air exchanges/hr. In ISO Class 8, personnel are often present continuously. Employees may be dressed in standard work attire and visitors in a disposable apron. It is recommended to maintain a minimum overpressure of the room relative to the adjacent zone of 5-10 Pa. Requirements for equipment and materials intended for Clean Room with ISO air cleanliness class 8 (maximum average amount of particles released when: number of samples taken = 100; measurement performed in accordance with ISO 14644-14 in a cleanliness class at least one better than the purpose of the device; number of particles/m3) Detailed description in photos. Technical drawings attached to photos. Description of ventilation The purpose of the ventilation installation performed was to achieve the following air parameters in the Clean Room. The installation was made with the GBD PHARMA 2000 system, meeting all the requirements for 'clean rooms' in the highest classes of air purity. Parameters for the installation: a. Air purity - ISO 8. b. Temperature 19-23 st C c. Humidity max 38%. a. To ensure the required purity of the supplied air, an air handling unit manufactured by DOSPEL with a maximum capacity of V= 3500 m3/h [up to 15 air changes per hour] was used. The air handling unit is equipped with pocket filters : pre-filters FK EU5/EC2 and fine filters FK-EU9/EC2. In addition, HEPA 11 filters made by EUFILTER were used in diffusers located in the ceiling. Data sheets in point H6. As a result , with a measured flow rate of 3264 m3/h, an ISO 7 [class "C"] cleanliness class of the room was obtained in the resting state, and thus an ISO 8 [class "D" ] cleanliness class for the working state. b. The temperature range of 19-23 deg C is for the enlarged cooler and chiller to be freely maintained with 25% fresh air. c. In order to achieve in summer conditions with high temperatures of 30 deg C and humidity of 80%, a freon chiller of 31.4 kW and a chiller of 33.5 kW of cooling power were used. The chiller is made by FUJITSU supplied by Klimatherm Gdansk. The room is automatically regulated overpressure in relation to the external pressure - the pressure difference at the door : 15 Pa The automation of ventilation allows for "economical" mode , in which the installation works in a closed circuit and an overpressure of 15 Pa is maintained. Technical data attached to the photos. Nodpfx Aeq H H Rujf Sjlg

Year of construction: 2013, condition: excellent (used), Opportunity! We can offer you this very well-maintained "Vitek 2 XL" system from the global brand BioMérieux, firsthand from the federal government's inventory. As a fully automated system for the rapid detection of pathogens and resistance, the Vitek 2 system has become an indispensable part of virtually every medical laboratory in the world! The system was acquired by the federal government in November 2013 and continuously inspected and maintained in accordance with the maintenance contract. The last inspection and maintenance was carried out until August 2023. At the end of 2022, the device was taken out of service in working order due to a new purchase. All components are in top optical and technical condition, with no significant damage. Minor scratches and discoloration on the housing are due to normal operation and do not limit its use in any way. Description: The VITEK 2 system provides everything healthcare laboratories need for rapid and accurate microbial identification and antibiotic susceptibility testing. The system is used for the microbiological identification of pathogens of animal origin. It enables rapid and accurate antibiotic susceptibility testing and resistance detection. The automated system performs same-day susceptibility testing (with results in as little as 5 hours, supported by clinical trial data). This significantly improves veterinary laboratory workflow and optimizes clinical veterinary microbiology. The VITEK 2 system offers a comprehensive range of the most important susceptibility tests for veterinary diagnostics and is characterized by high performance and the ability to detect even low-level resistance and emerging resistance mechanisms (AmpC, ESBL, MBL, etc.). The software is also updated annually to incorporate any taxonomy developments or policy changes. The VITEK 2 disposable cards are sealed to prevent contamination during the bacterial suspension filling process. Nledpfx Aowi Smuof Seg Scope of delivery: - Vitek 2 XL including power supply unit - PC with pre-installed software - UPS, monitor, keyboard Dimensions (W x D x H): 1400 x 710 x 670 mm. Weight: 145 kg Shipping will be made within three business days after receipt of payment via insured freight forwarding. You can also pick up the device from us during regular business hours. The total weight of the system, including accessories and pallet, is approximately 200 kg. The pallet is oversized! Sales are exclusively for businesses; you will, of course, receive an invoice with VAT shown. Private buyers have the option of purchasing the device "on behalf of a customer"; direct commercial sales to private individuals are expressly excluded! The goods are sold without any warranty or liability for material defects. This exclusion does not apply to claims for damages resulting from grossly negligent or intentional breach of the seller's obligations, nor to any injury to life, limb, or health. Please feel free to contact us at the address provided for any inquiries regarding prices or technical details.

Year of construction: 2000, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 68370, SMB Technik Multima 9R/9L/3K automatic beer bottling monobloc for rinsing, counter-pressure filling and crown capping of glass bottles. Nsdpfoz Dhrqjx Af Solg The machine was previously in operation at a Norwegian brewery. Following the sale and removal of the labelling machine, an electric motor is required to drive the bottling line. The electric motor is not included in the sale. The SMB rinsing, filling and capping monobloc was operational prior to this change and can be inspected at its current location in Norway. CONFIGURATION * 9-station bottle rinser * 9-head counter-pressure filler * 3-head crown capper * Automatic bottle transfer through rinsing, filling and capping sections * Conveyor sections * CO₂ counter-pressure / isobaric filling * Long-tube bottom-up filling * Separate bottle pressurising and return-gas system * Automatic filler bowl level and pressure control * High-pressure injection / jetter before capping * Electrically interlocked safety doors * Automatic bottle presence monitoring FILLING PROCESS The Multima is designed for bottling beer in glass bottles. Bottles are rinsed before being transferred to the filling section. Before filling, the bottles are pressurised, normally using CO₂. Beer is then filled from the bottom through long filling tubes. The system uses separate channels for bottle pressurising gas and return gas and is designed to minimise turbulence, foaming and oxygen uptake. After filling, the bottles pass a high-pressure injection device (jetter), which produces controlled foaming to help displace air from the bottle neck immediately before crown capping. TECHNICAL DATA Manufacturer: SMB Technik GmbH, Mannheim, Germany Model: Multima 9R/9L/3K Year: 2000 Serial number: 68370 Electrical supply: 400 V / 50 Hz Current: 12 A Container: Glass bottles Product: Beer Closure: Crown caps Filling principle: Counter-pressure / isobaric Rinser: 9 stations Filler: 9 filling valves Capper: 3 heads A 400 V to 230 V converter is included in the sale. DOCUMENTATION Extensive original SMB technical documentation is available, including operating instructions, setup and adjustment procedures, bottle changeover information, cleaning and sanitising procedures, maintenance and troubleshooting information, as well as filling-valve technical documentation. IMPORTANT The labelling machine has been sold separately and is NOT included. An electric motor is required to operate the bottling line and is NOT included. Tanks and other brewery equipment visible in the photographs are not included unless specifically agreed. The machine is located in Norway and can be inspected by appointment. Dismantling, loading and transport can be discussed separately.

Year of construction: 2018, operating hours: 35,000 h, condition: used, functionality: fully functional, Description of fully automated dryer Major overhauling made by mid 2025 • The housing of the dryer is welded steel construction. The internal floor is made of perfored sheet board. The dryer has an external casing (walls and ceiling) in sandwich panel. • The dryer is driven by hydraulic power pack. • The dryer is equipped with “Ziehl Abegg”, MAXvent axial fans. It's propeller blades are made out of light casted material. One of the most energy efficient product on the market. Hot air generator is equipped with two “Geo Coil’’ heat exchangers. (fully functional but has bent fins) • The control system is equipped with a touch display for operation and visualization of the Dryer. Remote control via PC possible. Incl. web server on the panel for the visualization of drying processes via Ethernet interface. • Working mode according to air exit temperature. The rotational speed of the fans automatically adjusted by the frequency converters so that a desired air temperature level is maintained. Includes pressure measuring devices and extension of control system. • Dryer’s heat carrier temperature approx. 85°C flow temperature and approx. 65°C return temperature. Heat carrier flow defined as 176m³/h • Drying air ventilators equipped with frequency converters • Moisture sensors at the outlet of the dryer: YES • Adjustable height of drying bed: YES • Enlarged fuel receiving bin: Yes General specifications • Infeed material: Wood chips • Size of material: G100 • Water content infeed material max. 45% • Water content outfeed material 7-10% • Designed capacity outlet approx. 1.600 kg/h • Density (wet): 300 kg/m³ Nodpsxc Eitefx Af Sjlg • Designed drying surface approx.: 97 m² • Designed climate conditions on site: Ambient temperature 0°C; relative humidity 70%, air pressure: 990 mbar • Noise pressure level, 75 dB, (1 m distance from air inlet port) Dryer fans, installed power: 74 kW Dryer hydraulic powerpack: 15 kW

Condition: used, Year of construction: 2010, functionality: fully functional, type of input current: three-phase, cutting length (max.): 12,000 mm, cutting width (max.): 640 mm, saw drive: 15,000 W, input voltage: 400 V, wheel diameter: 600 mm, – Year of manufacture: 2010 Njdpfsy Na Hvjx Af Solg TECHNICAL SPECIFICATIONS: – Motor: 15 kW Cutting dimensions: – max. log diameter: 95 cm – clearance between rollers: 73 cm – max. cutting width (square timber): 64 cm – max. cutting height above saw blade: 39 cm – max. cutting length: 12 m Saw head equipment: – automatic cutting thickness adjustment device – electric head height adjustment: up/down – electric forward/reverse head feed: infinitely variable feed speed – electric saw blade guide arm – hydraulic sawblade tension system with air cushion – debarking unit Sawblade: – length: 4670 mm – width: 38 mm - 50 mm – sawblade guide wheels diameter: 600 mm – belt type: Z – material: cast iron The sawmill is equipped with full hydraulics: – hydraulic leveling system – side stops – material clamp – comb-type log turner – 3 loading arms Machine dimensions: – length: 1520 cm – width: 235 cm – height: 240 cm

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 531 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. Nledpfoz Agv Usx Af Seg - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 532 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit Nlsdpfxjz Agw Es Af Ssg - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 533 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Nledpfx Afsz Ag Rrj Sjg Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Condition: good (used), functionality: fully functional, A fuel transfer device is being offered for sale. Inspection possible by appointment. Manufacturer: GL GmbH Metall- und Werkstattechnik − Model: 100/100 S − Serial number: 3448 − Year of manufacture: 08/2017 − Technical data: > Tank capacity: 100 litres > Delivery rate: 15 l/min > Weight: 92 kg > Fill level indicator: visual > Mobility: mobile > Switching suction/return filling: Nodpsxt H Ilsfx Af Sjlg Single-lever operation/ball valve > Tank change: manual

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 530 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible Nedpfjzz Rpcox Af Sslg - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Condition: used, functionality: fully functional, overall weight: 3,000 kg, operation weight: 3,000 kg, maximum load weight: 3,000 kg, empty load weight: 3,000 kg, loading space volume: 18 m³, loading space width: 2,000 mm, loading space length: 3,000 mm, loading space height: 3,000 mm, Year of construction: 2022, operating hours: 2,000 h, machine/vehicle number: K22092001, ## Complete Nitrogen Generation System – Generator + High-Pressure Booster + Chiller For sale: a complete industrial nitrogen generation and high-pressure supply system, designed for use with high-power fiber laser cutting machines. The system allows nitrogen to be generated on-site and supplied to the laser at the required high pressure, significantly reducing dependence on liquid nitrogen deliveries. ### Complete system includes: * Nitrogen generator * High-pressure nitrogen booster * Industrial chiller / cooling system * Control system * Filtration and necessary system components ### Technical specifications: Nitrogen generator * Nitrogen purity: up to [99.99%] * Nitrogen capacity: [30 Nm³/h] * Outlet pressure: [8 bar] * Automatic operation High-pressure booster * Maximum nitrogen pressure: [200 bar] * Capacity: [25 Nm³/h] * Designed for continuous industrial operation * Suitable for fiber laser cutting applications Chiller * Cooling capacity: [XX kW] * Designed for cooling the nitrogen booster/system * Industrial continuous-duty design ### Application The system was used for supplying nitrogen to a high-power fiber laser cutting machine. Suitable for laser cutting of: * Stainless steel * Aluminum * Carbon steel and other materials where high-pressure nitrogen cutting is required Nlsdezv T Abspfx Af Ssg The equipment is sold as a complete system. Condition: Used, fully functional Location: Lithuania Availability: Immediately available The system can be inspected and tested on site. More photos, videos, and detailed technical specifications are available upon request. Worldwide transport can be arranged.

Condition: used, Rotating Device Gunter Seibold Rotating Device for HTS Coils – Steplessly Adjustable Drive (Type S05082) Description: Professional rotating device designed for accommodating and rotating HTS coils with a winding core. Developed to ensure even distribution of two-component resin during the curing process. Ideal for development, laboratory, or manufacturing environments working with high-temperature superconductor coils. The winding form is electrically heated, with power supplied directly to the form (not included in the scope of delivery). The machine stands out for its precise control, user-friendly operation, and maintenance-friendly design. Nedpfx Afjzil R Re Selg Technical Features Solid Machine Base: Welded square tube construction with leveling screws and floor anchors Drive: Three-phase planetary gear motor (11 kW, 400 V, 50 Hz, 3 phases) Steplessly adjustable speed (0.2 – 100 min⁻¹) Soft-start & soft-stop via frequency inverter (4-quadrant controller) Electromagnetic spring-applied brake (safe stop in case of power failure) Selectable clockwise/counterclockwise rotation Control Panel: 5.7" touch panel for configuring speed, direction, ramps, time, or total rotations Emergency stop button, ergonomically integrated 2 programmable analog inputs Electrics & Control Cabinet: Control system integrated in the machine base 400 V / 230 V supply, 24 V DC control voltage Circuit breakers, RCD 30 mA Sockets: 8× 230 V / 16 A, 2× 400 V / 16 A CEE, 1× 400 V / 32 A CEE Control cabinet with climate control unit Complete grounding & static discharge of the main shaft Adjustable workplace lamp, tiltable and height-adjustable Specifications Feature / Value Max. coil diameter: 1,500 mm Coil passage: 1,700 mm Center height above floor: 1,100 mm Max. load on faceplate: 500 kg Faceplate Ø 600 mm, 4 T-slots (DIN 650) Speed range: 0.2 – 100 min⁻¹ (stepless) Torque: 775 – 539 Nm Operating voltage: 400 V / 50 Hz Control voltage: 24 V DC Connected load: 11 kW Connection current: 32 A Color scheme (according to RAL): Base machine: Blue (RAL 5010) Moving parts: Yellow (RAL 1021) Control panel / cabinet: Light grey (RAL 7035 / 5010) Weight: approx. 1,800–2,000 kg Condition: used Scope of delivery: (see picture) (Subject to change and error in the technical data and information!) We are happy to answer further questions for you by phone.

Condition: good (used), Year of construction: 2015, Used, in good condition Year of construction: August 2015 (installed end of 2016) Technical description Working width (with tool cutting circle 125 mm): 20 - 230 mm Working height (with mould cutting circle 125 mm): 8 - 120 mm Six standard feed pendulums from above Two driven rollers in the machine table 1st spindle First lower horizontal spindle Motor with brake 5.5 kW (7.5 HP) Diameter 40 mm Speed 6000 rpm Tool cutting circle 125 - 145 mm Folding device, incl. folding cutter 2nd spindle First right vertical spindle 5.5 KW (7.5 HP) Individual motor with brake Diameter: 40 mm Nledpfxsqu Sc He Af Seg Speed: 6000 rpm Tool cutting circle 40 mm below table level: 100 - 200 mm Tool cutting circle 55 mm below table level: 100 - 180 mm Max. Tool diameter behind stop plane 180 mm Maximum moulding depth 35 mm Axial adjustment movement 55 mm 3rd spindle First left vertical spindle Individual motor with brake 7.5 KW (10 HP) Diameter 40 mm Speed 6000 rpm Tool cutting circle 40 mm below table level 100 - 200 mm Tool cutting circle 55 mm below table level 100 - 180 mm Maximum moulding depth 35 mm Axial adjustment movement 55 mm 4th spindle First upper horizontal spindle Motor with brake 7.5 KW (10 HP) Diameter 40 mm Speed 6000 rpm Tool cutting circle 112 - 200 mm Max. tool cutting circle for straight cutterheads: 180 mm Maximum moulding depth 35 mm Axial adjustment movement 40 mm Divided pressure shoe in front of upper spindle, adjustable to tool cutting circle and swivelling away from the tool, spring-loaded. 5th spindle Second upper horizontal spindle Motor with brake 7.5 KW (10 HP) Diameter 40 mm Speed 6000 rpm Tool cutting circle 112 - 200 mm Max. tool cutting circle for straight cutterheads: 180 mm Maximum moulding depth 35 mm Axial adjustment movement 40 mm Divided pressure shoe in front of upper spindle, adjustable to tool cutting circle and swivelling away from the tool, spring-loaded. 6th spindle Second lower horizontal spindle Motor with brake 7.5 KW (10 HP) Diameter 40 mm Speed 6000 rpm Tool cutting circle 112 - 200 mm Maximum moulding depth 15 mm Axial adjustment movement 35 mm Spindles in general All moulder spindles dynamically balanced for high concentricity. Feed system Frequency-controlled feed 5 - 30 m/min. infinitely variable with brake 4 KW (5.5 HP) Machine stand, tables and stops Manual lubricant pump for table resin removal Machine operation Memory function For memorising the setting values of profiles. Spindle axes with electronic double displays. Function: - Saves the setting values of the finished profile under a profile number at the touch of a button - When the profile number is selected again, the electronic double displays show the setting values - The displays are synchronised by manually adjusting the spindle - 99 memory locations Electric height adjustment of the feed Centralised position of lubrication points at the front of the machine

Condition: good (used), Year of construction: 2010, Striebig Panel Saw Compact 5220, Year of Manufacture 2010 Robust, self-supporting, firmly welded, and torsion-resistant saw frame Nedpfjzhx A Rox Af Selg Stable, durable saw beam steel construction Robust bearing of the motor carriage ensures high cutting accuracy Powerful, low-vibration 3.9 kW motor (5.3 HP) TRK dust extraction system Automatically adjusting aluminum slat grid with plastic supports Device for wall mounting Ball-bearing support rollers Split center support at optimal working height, with aluminum grid Integrated small parts support made of wood Supersilent sound insulation to reduce saw blade noise Electromagnetic motor brake Saw weight approx. 910 kg Cutting depth 60 mm Saw motor power 3.9 kW (5.3 HP) Saw blade diameter 250 mm Saw blade bore 30 mm *1 Emission sound pressure level at the workplace LpA 82 dB *2 Saw blade speed 5250 rpm 2 dust extraction ports ø 100 mm Connection value 4.8 kW Mains connection 3 x 400 V / 50 Hz Cutting range: L: 4600; Hvertical: 2200 mm, Hhorizontal: 2100 mm Equipment: - Compact 5220 - Strip fence - Mechanically braked support rollers - Freestanding support complete Location: Available from stock in 54634 Bitburg - immediately available -

Year of construction: 2014, condition: excellent (used), functionality: fully functional, STORM | Two-way hygienic turnstile / hand disinfection station with a double revolving door Nlsdpsz Elabsfx Af Ssg Manufacturer: Storm Type: Hygienic station (two-way turnstile) Serial number: 11 348 14 Year of manufacture: 2014 Power supply: 230 V, 50 Hz Power: 0.1 kW Overall dimensions: 2100 x 1550 x 1600 mm This industrial, two-way turnstile hygienic station from the renowned Storm brand is an advanced control and sanitary solution designed to maintain the highest hygiene standards in production facilities. The device is used to enforce the hand disinfection procedure for personnel passing between areas with different levels of sanitary requirements (e.g., from the social area to the production area). The core of the station is an automatic, touch-free module for dispensing disinfectant liquid, combined with an integrated double revolving door. The mechanical lock on the revolving door only releases passage after the employee has correctly completed the hand disinfection cycle, completely eliminating human error and the risk of skipping the sanitary procedure. The use of two separate walkways with a common control panel allows for smooth organization of employee traffic in both directions.

Condition: like new (used), Year of construction: 2021, operating hours: 180 h, functionality: fully functional, machine/vehicle number: 35120025 (inkl. Zubehör 35120030/35120035/35120040), type of input current: three-phase, space requirement height: 2,010 mm, space requirement length: 2,374 mm, space requirement width: 754 mm, Sollich nut mixing unit, type NM 200 VA, year of manufacture 2021, for the continuous mixing of dry ingredients into chocolate, fat, and spreadable products. Performance: • max. 1,200 kg/h of spreadable product with 5% dry ingredients (60 kg/h) • max. 1,200 kg/h of spreadable product with 10% dry ingredients (120 kg/h) Equipment: • retractable mixing screw for simplified cleaning, recommended for frequent product/color changes • 2 installed rotary valve feeders TD 1 (machine no. 35120030 and 35120035), arranged opposite each other, each with a level switch and a 150-liter hopper. This allows two different dry ingredients to be dosed in parallel or double the dosing capacity for one dry ingredient to be achieved. Nlodpozzvhdefx Af Sjg • Double-walled collection hopper at the mixer outlet with emptying pump SKP 1000 L-VA (machine no. 35120040) • Unheated connecting pipe attached to the side of the lower container section to the hopper for complete emptying via the attached rotary lobe pump SKP 1000 L-VA, can be shut off on both sides with flat flap valves, pipe can be removed via milk pipe fittings and quick-release couplings. • Hot water circulation system with water-water heat exchanger and circulation pump to supply the mixer, collection hopper, emptying pump, and piping to the filling system, for connection to the customer's cold water supply. • Stainless steel control cabinet for housing the power electronics • Visualization and operation are carried out ex works via the HMI of the associated tempering machine; a separate operating panel is not part of the unit. • Completely installed on a mobile stainless steel frame with swivel casters or lifting tabs for moving with a lifting device, frame with ergonomic handle, all media connections are pluggable or with quick-release couplings. This makes the unit mobile and can be switched between several lines. For operation with another control system, an adjustment of the visualization is required; the power electronics are included in the supplied stainless steel control cabinet. Connection requirements: • customer's cold water for the hot water circulation system • 400 V, 3 phases, 50 Hz + neutral + earth Condition, history and process: Year of manufacture 2021, delivery and commissioning by Sollich in week 40/2021, approximately 180 operating hours. Used exclusively for palm oil-free spreads including nut-containing products, stored dry in Wuppertal since the end of 2024, inspection by appointment. Documentation and conformity documents are available. Purchase value in 2021 according to order confirmation: €116,830 (unit complete including rotary valve feeders, emptying pump and stainless steel frame). Sale from business to business with exclusion of warranty, technical specifications according to manufacturer's documents, subject to errors. This nut mixing unit is also available as part of a complete tempering and mixing system (including Turbotemper TE 1600 D and cooling unit), see advertisement ID A22725782.

Year of construction: 1999, condition: excellent (used), working width: 620 mm, machine/vehicle number: SE 01510 A10, Heating Element Welding Machine HP60/40 by BRANSON Nledeykvdlopfx Af Sog The drive is hydraulic, supported by positioning and control systems. The machine is equipped with its own vacuum pump. Only a few operating hours (approx. 6,800 hours). Usable heating element area: width 600 mm x depth 400 mm Max. workpiece dimensions: - Max. width: 620 mm - Max. depth: 420 mm - Max. upper height: 350 mm - Max. lower height: 350 mm (Combinations of part heights possible, depending on contour) - Max. processing temperature for contact method: 400°C The modular frame design allows for easy conversion and retrofitting. The side doors and the front door in the welding area can be easily opened (for rapid retooling). The automatic safety lift door ensures a high level of operator safety. The temperature control units on the operator panel have actual/target displays. The control device is a Siemens PLC HMI. The machine is controlled by a Siemens PLC (S7-300 controller). Heating elements are equipped with temperature sensors for temperature regulation and serve as safety cut-offs in case of overheating. The pin systems in the tool mounting surfaces ensure reproducible positioning. Advantages of heating element welding technology: - Reliable welding of workpieces with low or varying wall thicknesses. - Low scrap rate due to dimensionally accurate and repeatable welds. - Precise time, temperature, and force control enable welding of sensitive parts. - Virtually all thermoplastics can be welded with this process. - Different thermoplastic types can be joined (compatibility needs to be verified). Technical data of the machine: - Power supply: 3 x 400 V AC + N + PE - Power: 25 kVA - Rated current: 20 A - Required cable cross-section: 5 cables, each 6 mm² - Required pneumatic connection: 6 bar Machine dimensions: - Machine width: approx. 1.22 m - Machine width with operator panel: approx. 1.8 m - Machine depth: approx. 2.1 m - Machine depth with operator panel: approx. 2.6 m - Machine height: approx. 2.4 m - Machine height with raised safety door: approx. 2.85 m (open door) Machine weight: approx. 2.2 t