Used Knuth Rsm 1000 C for sale (60,304)

Condition: used, Year of construction: 2017, grinding length 1000 mm Csdowp Tumspfx Akcerb centre height 180 mm length 3600 mm width 1650 mm height 1800 mm weight of the machine ca. 3,7 t

Condition: used, Year of construction: 2017, grinding length 1500 mm centre height 180 mm weight of the machine ca. 3,9 t dimensions of the machine ca. L: 4900 x 1650x 1800 m Credpfxowm Rqgj Akcsb

Condition: like new (used), Year of construction: 2007, functionality: fully functional, type of input current: AC, pressing force: 1 t, table width: 200 mm, table length: 230 mm, total width: 400 mm, total height: 860 mm, overall weight: 105 kg, air pressure: 6 bar, FCP-C 10KN pneumatic press machine for sale in several pieces manufacturer: FCP-C pressing force 1 ton Stroke: 75-100 (mm) Crsdpsv E Sazofx Akcsb Air pressure 0.2-0.5 MPa Open height 320 (mm). two-hand operation table size: 200x230mm Shaft dimensions Bore diameter φ15H9 (mm) x depth 35 (mm). Speed ​​controller Low friction roller Rotation stop lever height: 880mm length: 360mm width:400mm weight: 105kg Many options (timing box with counter, load management device, etc.). ●The lowering speed of the press can be freely adjusted by the speed controller. ●Mechanical stop for bottom dead center adjustment. ●Inching operation valve for smooth forming. ●Air equipment is also standard.

Condition: new, functionality: fully functional, Year of construction: 2021, input voltage: 380 V, type of input current: three-phase, warranty duration: 12 months, working height: 650 mm, machine/vehicle number: SM20215245, Equipment: documentation/manual, Neat Lantech C-1000, right-handed version Cjdpfx Aket Dn Hqjcerb

Condition: excellent (used), Year of construction: 2009, L & Z Lathe (used) Manufacturer: Knuth Model: DM 1000 A Year of manufacture: 2009 Centre height: 180 mm Centre distance: 1000 mm Swing over bed: 360 mm Crjdpfx Akjy Axwgocjb Swing over cross slide: 240 mm Swing in gap: 600 mm Spindle bore: 56 mm Spindle speed range: 30 – 1600 rpm Tailstock taper: MT 4 Quill diameter: 60 mm Quill stroke: 130 mm Motor power (spindle motor): 5.5 kW Bed width: 290 mm Machine weight: 1,500 kg Space requirements approx. L 2200 mm x W 1000 mm x H 1600 mm 3-jaw chuck 250 mm incl. jaws Multifix toolpost, size B incl. insert 3-axis digital readout (Knuth) Chip tray Coolant system Faceplate Fixed steady Travelling steady Machine feet The machine is in good condition and ready for immediate use. Forklift available, free loading onto truck Affordable shipping possible Location of the machine: 48477 Hörstel

Condition: used, Cylindrincal grinding machine KNUTH RSM 750 interna/external DRO This machine can be inspected under power in our warehouse. Mimu Machine Tools Cjdpjul Akgjfx Akcerb Gussago BS Italy

Condition: good (used), Year of construction: 2006, functionality: fully functional, center height: 100 mm, workpiece weight (max.): 35 kg, grinding length: 500 mm, grinding diameter: 125 mm, overall weight: 1,800 kg, input voltage: 400 V, For sale: 1 used grinding machine. Manufacturer: Knuth Werkzeugmaschinen GmbH. Model: RSM 500. Year of manufacture: 2006. Technical data: Centre height: 100 mm; Max. grinding diameter: 125 mm; Distance between centres: 520 mm; Max. grinding length: 500 mm; Max. workpiece weight: 35 kg; Internal grinding diameter: 10 - 40 mm; Internal grinding depth: 50 mm; Spindle taper: MK4; Tailstock: MK2; Weight: 1,800 kg. Documentation available. The machine can be inspected at our warehouse in 09599 Freiberg. Csdpexzrvwofx Akcorb

Condition: ready for operation (used), Year of construction: 2011, overall weight: 15,200 kg, This 3-axis KNUTH XMill 1000 TB was manufactured in 2011. It features a total power of 23.8 kW and operates on 400 volts with a frequency of 50Hz/3. Ideal for detailed vertical machining tasks. Contact us for more information. Codjx D Ruqepfx Akcerb • Total power: 23.8 kW • Voltage: 400 V • Frequency: 50 Hz • Phases: 3

Condition: as good as new (ex-display), The TDM S 430/1000 is a highly versatile Conventional Horizontal Lathe from KNUTH, designed to meet the demands of both single part and small batch productions in tool making and device construction. With an inverter that allows spindle speeds of up to 2,000 rpm and a user-friendly control panel, this lathe is ideal for training applications. Its robust construction features a one-piece heavy-duty cast-iron bed, ensuring increased rigidity and stability during operation. A modern 3-axis position indicator, adjustable longitudinal stops for automated feed shut-off, and a powerful coolant system further enhance its functionality. The TDM S 430 also includes an easy-to-read digital display for spindle speed, ergonomic selector levers for effortless control, and comprehensive standard equipment such as a 4-station tool holder and a robust LED work lamp. Experience precision and efficiency in your machining tasks with the TDM S 430/1000. Request a quote today to explore how this exemplary Conventional Horizontal Lathe can elevate your production capabilities. Cedpfx Akouyg Dnscorb

Condition: used, The KHS E 1000 is a robust Manual Guillotine Shear that belongs to the Guillotine Shears category, featuring a solid cast-iron construction designed for the professional workshop. This classic manual plate shear is essential for locksmiths and metal fabricators, enabling them to cut large steel plates with ease and precision. The machine boasts a working length of 1,040 mm and can handle plate thicknesses up to 1.5 mm, ensuring it meets the demands of various projects. With adjustable table stops and a manually adjustable back-gauge, operators can achieve accurate cuts seamlessly. Additionally, the counterweights enhance comfort during operation, making the KHS E 1000 a reliable choice for any metalworking environment. Embrace the quality of KNUTH products and invest in the KHS E 1000 for your workshop today; order online to elevate your sheet metal processing capabilities. Cedpfxjyfl U As Akcorb

Condition: new, The Servoturn 500/1000, a remarkable addition to the Conventional Horizontal Lathes category, exemplifies the innovative approach of KNUTH in the Servo-conventional Lathes group. This machine integrates cutting-edge feed technology with the reliability of traditional engineering. Its electronic hand wheels and ball screw drives enhance precision, enabling high-torque servo motors to execute feed movements with unrivaled dynamics, surpassing standard lathe capabilities. The user-friendly interface allows operators to select feed and thread pitches effortlessly, while the rapid traverses minimize downtime, ensuring high productivity. A robust machine frame and heavy-duty tailstock guarantee stability and performance, making it suitable for heavier materials. The Servoturn 500's standard equipment includes a quick-change tool holder, a 3-axis position indicator, and a reliable coolant system. Experience unparalleled turning with this advanced machine. To learn more, request a quote today and elevate your machining capabilities with the Servoturn 500/1000, a stellar choice in the Servo-conventional Lathe market. Codpfol Iy Sisx Akcorb

Condition: good (used), Type: TS -70/1000-10 For sale is a CTS temperature test chamber Model: TS -70/1000-10 Cooling: water-cooled refrigeration unit Compressor has been replaced! Features: - Multi-touch control system - USB and Ethernet interfaces - Cable feedthroughs for test cables: 4 × Ø 125 mm - Safety temperature limiter Applications: - Environmental and longevity tests - Thermal cycling tests (stress screening) - Quality assurance and research & development - Electronics, automotive, materials testing Test chamber volume: 1,000 liters Crjdpfxexdi Ezo Akcsb Test chamber dimensions: - Height: approx. 1,000 mm - Width: approx. 860 mm - Depth: approx. 1,100 mm External dimensions: - Height: approx. 1,950 mm - Width: approx. 1,270 mm - Depth: approx. 1,900 mm Temperature range: -70°C to +180°C Temperature deviation: ± 0.3 K over time Temperature change rate: up to approx. 10 K/min Electrical connection: 400V 3/N 50Hz Rated power: approx. 23.1 kW Rated current: approx. 40 A Refrigerant: R404A / R23 Weight: 1,000 kg For your peace of mind as a buyer, please note: The following inspections and services are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if required 3. Leak test with certificate 4. Following successful checks, chambers undergo a documented test run Condition: used Scope of delivery: (See pictures) (Specifications and technical data subject to change and errors excepted!) We are happy to answer further questions by phone.

Condition: excellent (used), Weiss Model: WK11-1000/40 For sale is a professional Weiss Umwelttechnik WT-WK 1000/40 climate test chamber with fully automatic cold-regenerating adsorption dryer. The installed fixtures in the test chamber can be removed if required. Currently, due to these fixtures, the control cabinet is limited to a temperature range of −40°C to +60°C. Once the fixtures are removed, the manufacturer can expand the temperature range back to the standard values of −40°C to +180°C, as the fixtures are not suitable for these higher temperatures. This equipment is ideal for precise temperature and humidity testing on components, assemblies, and devices. It is perfectly suited for applications in industry, development, quality assurance, and research. Weiss Climate Test Chamber – Water Cooled Data for Temperature Tests: - Temperature range: −40°C to +60°C - Temporal temperature fluctuation (at center of usable space): ± 0.1 to ± 0.5 K Crodpfjx Hxkzsx Akceb - Spatial temperature deviation: ± 0.5 to ± 2.0 K - Temperature change rate: - Heating: 4 K/min - Cooling: 3 K/min Data for Climate Tests: - Temperature range: +10°C to +95°C - Humidity range: 10 to 98 % r. H. - Temporal temperature fluctuation (at center): ± 0.1 to ± 0.3 K - Spatial temperature deviation: ± 0.5 to ± 1 K - Temporal humidity fluctuation (at center): ± 1 to ± 3 % r. H. - Thermal compensation: - In the range of +25°C to +95°C - At a relative humidity of up to 90%, 500 W Humidification System Data: - Reservoir volume: 20 l - Water quality: demineralized - pH value: 6 to 7 - Conductivity: 5 to 20 μS/cm³ - Water consumption at constant +40°C, 92% r. H.: 21/24 h - Temperature gradient: - (according to IEC 60068-3-5): 1 to 2 K Test Chamber Dimensions: Height: 950 mm, Width: 1100 mm, Depth: 950 mm External Dimensions: Height: 1980 mm, Width: 1385 mm, Depth: 1850 mm Test Chamber Volume: approx. 990 liters Nominal Voltage: 3/N / PE AC 400 V +10% 50 Hz Nominal Power: 11.5 kW, Nominal Current: 22.0 A Refrigerant: R 404A Weight: 840 kg Important information for your safety as a buyer! The following steps are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See image) (Technical data subject to modifications and errors!) Further questions can be answered via telephone.

Condition: good (used), Distance between points 1000 mm Stitch height 230 mm Main motor power 9.2 Kw Working wheel dimensions (h x w x d x w) 500x80x203.2 mm Ø max to grind 460 mm Tailstock cone MORSE 4 MORSE 5 tailstock nose cone Max. Z-axis travel 1115 mm Max. X-axis travel 260 mm Crjdpjtrgnzefx Akcsb Approx dimensions (length x width) 440x370 cm Approx. weight 4700 Kg

Condition: ready for operation (used), functionality: fully functional, The frames of the RSM series machines have a heavy-duty design and long, supported guides. The table can rotate and the precisely adjustable hydraulic feed moves smoothly in the longitudinal direction. Codjri Ngyopfx Akcsrb WORKING AREA Height point 135 mm Workpiece length 640 mm Grinding length 500 mm Grinding diameter 8 mm - 200 mm Inside diameter without support 25 mm - 100 mm Workpiece weight between centers (max.) 50 kg Internal depth 125 mm Table miter cuts (max.) -3° / +9° R / L Peripheral speed 38 m/s DIMENSIONS AND WEIGHTS Grinding disc dimensions400 mm x 50 mm x 203 mm Grinding wheel internal dimensions (max.)50 mm x 40 mm x 16 mm Grinding disc dimensions (min.)45 mm x 35 mm x 10 mm Dimensions (length x width x height)2.5 m x 1.6 m x 1.5 m Weight 2500 kg

Year of construction: 2019, operating hours: 3,577 h, condition: excellent (used), Weiss Climate Test Chamber ClimeEvent C/1000/70/5 Type: C/1000/70/5 Manufacturer: Weiss Technik GmbH Year of manufacture: 2019 Design: water-cooled Operating hours: approx. 3,577 h For sale is a Weiss ClimeEvent climate test chamber with a 1,000-litre test volume. Suitable for temperature and climate testing in the industrial, automotive, electronics fields, as well as research and development. Temperature and climate data: - Temperature range: approx. -70 °C to +180 °C - Temperature change rate: up to approx. 5 K/min - Humidity range: approx. 10% to 98% RH Test chamber: - Volume: approx. 1,000 litres - Internal dimensions: approx. 950 x 1,100 x 950 mm Dimensions: - External dimensions: approx. 2,000 x 1,415 x 2,030 mm Electrical data: - Mains connection: 3/N/PE AC 400 V ±10% / 50 Hz - Rated power: approx. 21 kW - Rated current: approx. 34 A Refrigerants: - R449A - R23 Weight: Crodpfx Akjy Iyx Ajceb - approx. 1,300 kg Applications: - Temperature testing - Climate testing with humidity - Thermal cycling tests - Continuous load tests Condition: - Used - Device was in operation until recently Scope of delivery: - Weiss ClimeEvent C/1000/70/5 - Accessories as shown in the pictures Inspection possible by appointment. Loading can be organised. Sale without warranty. (Subject to prior sale and alterations.)

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Manufactured in 2014, this equipment has been used only 50 times and was subsequently decommissioned. It is in near-mint condition (as good as new). Furnace technical data for MOBILE MUFFLE 80-65-140-AZ Useful load dimensions 800 x 650 x 1.400 mm Maximum operating temperature 999 Celsius degrees Maximum furnace temperature 1.000 Celsius degrees Regulation zones 3 thyristor control zones Electrical voltage 3 x 400 V  50 Hz Crjdpfx Aksyniz Eecob Installed electrical power 54 Kw Operating power consumption 30 Kw Nitrogen pressure (N2) 5 bar Nitrogen consumption for purging and safety 4-5 Nm3/h in the event of a power failure or for 10 minutes at start-up and shutdown Operating nitrogen consumption 3-3.5 Nm3/h during the cycle Water pressure Minimum 2 bar Operating water consumption 0.1-0.2 m3/h   at 20 Celsius degrees inlet temperature Furnace weight 5,3 Ton

Condition: excellent (used), CTS Climate Test Chamber C-70/1000-S Device Data Manufacturer: CTS GmbH Model: C-70/1000-S Year of manufacture: 08/2011 Serial number: 113054 Type: Climate test chamber / Environmental simulation chamber Cooling: Water-cooled Description Used CTS climate test chamber for precise temperature and climate testing. Suitable for material, component, and reliability testing. Applications in industry, research, development, and quality assurance. Temperature and Climate Data Temperature range: -70 °C to +180 °C Temperature change rate: approx. 2.5 K/min heating Temperature change rate: approx. 2.5 K/min cooling Humidity range: 10% to 98% RH Dew point range I: +7 °C to +94 °C Dew point range II: -10 °C to +7 °C Electrical Data 400 V / 3/N / 50 Hz Power: 9.7 kW Current: 17.9 A Protection class: IP 22 Cooling System Refrigerants: R404A / R23 Pre-cooling stage: R404A, 2.3 kg Cooling stage: R23, 0.86 kg / 15 bar Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Features CTS control unit with LCD display Programmable operation Digital setpoint/actual value display Viewing window in door Stainless steel test chamber Test specimen protection / temperature limiter Interior lighting Cable ports on the sides Feedthroughs approx. 50 mm and approx. 125 mm RS232 interface as per documentation Digital outputs for test specimen control Mobile design on castors Dimensions Test chamber volume: approx. 1000 liters External (W x D x H): approx. 2245 x 1270 x 1950 mm Installation size (W x D x H): approx. 2350 x 1290 x 2000 mm Weight Test chamber: approx. 1000 kg Recooler: approx. 120 kg Documentation Declaration of conformity Test certificates Operating manual Error messages and digital channels Site plan Quick guide Crsdpfjy Iam Hex Akcjb Humidity diagram Scope of Delivery CTS Climate Test Chamber C-70/1000-S Documentation as available Scope of delivery as shown Optional Pre-delivery Service Function test Refrigerant service Leak test Test run with protocol Condition Used. Condition as per photos. Note Used equipment, sold without warranty. Inspection possible by appointment. Loading and transport can be organized on request. Subject to prior sale and technical changes. If you have any questions, please feel free to contact us.

Condition: excellent (used), RS-Simulatoren Temperature Shock Chamber ST2K 1000 / 55 Device Data Manufacturer: RS-Simulatoren Model: ST2K 1000 / 55 Design: Temperature Shock Chamber Crodpey H Igfjfx Akcsb Cooling: Water-cooled Description Used temperature shock chamber for standardized thermal shock testing. Suitable for material, component, and reliability testing. Ideal for use in industrial, automotive, research, and quality assurance applications. System Description - 2 separate temperature chambers (hot/cold) - Automatic horizontal test basket transfer - Fast cycling for temperature shock tests Temperature Ranges Hot chamber: +40 °C to +180 °C Cold chamber: -70 °C to +100 °C Temporal deviation: ±0.8 K Test Chamber Volume: approx. 580 liters Internal dimensions (W x H x D): approx. 1070 x 680 x 800 mm Max. load: approx. 150 kg Power Supply 400 V / 3~ / N / PE / 50 Hz Power: max. 33 kVA Max. current: 65 A Media Connections Cooling water: G 1", approx. 3 bar (max. 10 bar) Cooling water demand: max. 3.2 m³/h Cooling water return: non-pressurized Compressed air: NW 7.2, 4–10.5 bar Dimensions External (W x H x D): approx. 2800 x 2400 x 2200 mm Weight Approx. 2800 kg Features - Horizontal basket movement - C-rails in the test chamber - Large test basket (>1000 mm) - Observation window - Interior lighting - SE-604 control system - Programmable operation and data logging - RS232 interface Cooling System Refrigerants: R449A / R23 R449A: approx. 8.0 kg R23: approx. 2.5 kg Operating Data Operating hours: approx. 4,500 hrs Sound level: approx. 67 dB(A) Ambient Conditions Temperature: +12 °C to +30 °C Humidity: 25% to 75% r.h. Scope of Delivery - RS-Simulatoren Temperature Shock Chamber ST2K 1000 / 55 - Delivery as illustrated Optional Pre-Delivery Service - Functional test - Refrigerant service - Leak test - Test run with report Condition Used. Condition as shown in photos. Note Used equipment, sold without warranty. Inspection possible by arrangement. Loading and transport can be organized upon request. Subject to prior sale and modifications. Should you have any questions, please feel free to contact us.

Condition: excellent (used), CTS Climate Test Chamber Type: CS-70/1000-5 Water-cooled condenser Year of manufacture: 08/2018 For sale is a high-quality climate and temperature test chamber manufactured by CTS (Clima Temperatur Systeme), model CS-70/1000-5. This unit is designed for the simulation of various environmental conditions and is typically used in industrial, research, and quality assurance settings. It allows for precise testing under extreme temperature and humidity conditions, such as: - Material testing - Aging tests - Electronics and component testing - Climate and environmental simulations Thanks to its large test chamber (1000 liters) and high-performance control system, it supports both rapid temperature changes and constant long-term tests. The system is water-cooled, ensuring stable and efficient operation. Technical data: Model: CS-70/1000-5 Test space volume: approx. 1000 liters Control system: - Multi-touch controller with integrated program generator - Programmable test sequences Side pipe / cable ports: - 1x port NW 50 - 1x port NW 125 Temperature range: - –70 °C to +180 °C - Change rate: up to 5 K/min - Temperature stability: ±0.3 K Climatic data (humidity): - Humidity range: 10% to 98% r. h. - Dew point range: –10 °C to +94 °C Dimensions: - External (HxWxD): approx. 1950 × 1270 × 2245 mm - Internal (HxWxD): approx. 900 × 1000 × 1100 mm Electrical data: - Connection: 400 V / 3/N / 50 Hz Codpfey Hkc Aex Akcsrb - Power: 17.6 kW - Rated current: 28.5 A Refrigeration system: - R452A – 5.1 kg – GWP 2140 - R23 – 2.1 kg – GWP 14800 - Operating overpressure PS: 25 bar - Test pressure PT: 27.5 bar - Protection rating: IP 22 Weight: approx. 900 kg For your safety as a buyer, please note the following: The following procedures are carried out on our offered chambers before sale: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant if required 3. Leak test with certificate 4. Documented test run Condition: used The unit can be fully inspected as depicted in the photos. Display: STOP / manual mode Scope of delivery: - CTS climate test chamber CS-70/1000-5 - Delivery as shown in the photos Inspection by appointment is possible. Loading by forklift can be organized. (Subject to changes and errors in technical data!) We are happy to answer any further questions by phone.

Condition: ready for operation (used), Year of construction: 1985, operating hours: 29,192 h, spindle speed (max.): 4,000 rpm, total height: 2,988 mm, total width: 4,288 mm, overall weight: 9,000 kg, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, product length (max.): 4,152 mm, number of axes: 3, This 3-axis MAHO MH 1000 C/A was manufactured in 1985. It has approximately 29,192 machine hours and includes manuals and documentation. The protective doors are partially disassembled but included. If you are looking to get high-quality machining capabilities, consider the MAHO MH 1000 C/A universal machining centre we have for sale. Contact us for further details. Crodpfxsy Hizqs Akcjb Tool interface ISO 50Quill stroke vertical spindle mm 100Spindle speed range rpm 20–4000Spindle speed override % 80–120Feed rate X Y Z mm/min 1–4000Feed force X Z N 8000Feed force Y N 24000Rapid traverse m/min 10Feed and rapid override % 0–140Table diameter mm 1250Table length mm 800Center bore mm 42 H7T-slots 7T-slot spacing mm 100Manual cross adjustment mm 275Table indexing ratio 1:120Table rotation per handwheel turn deg 3Table rotation per division deg 2Positioning resolution deg 0.001Increment per division mm 0.026Table swivel X-axis deg ±30Table swivel Y-axis deg ±30Table rotation deg 360Table clamping pressure bar 80Max table load kg 800Table weight kg 1100Voltage V 220/380Frequency Hz 50Total connected load kVA 36Total load with coolant kVA 41Total load with coolant and tool changer kVA 46Positioning resolution mm 0.001Machine hours approx h 29192Condition currently idle not in operationDocumentation manuals availableProtective doors partially disassembled includedIncluded accessories none tool holders not includedTable axis one axis manual only not referenceable error present

Condition: good (used), Code: 0309 Brand: COSMEC Model: KV 1000/C Copying Router Technical data: Clearance from upright to spindle center mm 1000 Spindle vertical run mm 115 Spindle speed : 12000/18000 rpm Worktable dimensions mm 900 x 1000 Overall dimensions: mm 1850 x 1050 x 1800 h Cedpfx Aksylpp Dscsrb Weight kg 1000

Condition: excellent (used), Weiss WT-1000/70/5 Temperature Test Chamber For sale is a pre-owned temperature test chamber manufactured by Weiss, model WT-1000/70/5. This unit is designed for precise temperature testing in industrial and laboratory environments, and is suitable for use in research, development, and quality assurance applications. The test chamber allows for reproducible temperature cycles across an extended temperature range and is particularly suitable for material testing, aging tests, and stress tests under defined temperature conditions. Technical Data Manufacturer: Weiss Model: WT-1000/70/5 Type: Temperature Test Chamber Temperature Range: -70 °C to +180 °C Temperature Deviation (over time, center of usable space): ± 0.1 to ± 0.5 K Temperature Homogeneity (spatial): ± 0.5 to ± 2 K Heating rate: 6.1 K/min Cooling rate: 6 K/min Test chamber volume: approx. 1000 liters Test chamber dimensions (approx.): 950 x 1100 x 950 mm (H x W x D) External dimensions (approx.): 2000 x 1415 x 2105 mm (H x W x D) Permissible total load, test chamber floor: 150 kg Permissible load per shelf: 50 kg Rated voltage: 3/N/PE AC 400 V ± 10% / 50 Hz Rated current: 38 A Rated power: 26 kW Refrigerants: R404 / R23 Weight: approx. 955 kg Features - Water-cooled system - Spacious test chamber - High rate of temperature change - Industrial grade construction Condition Used, with age- and use-related signs of wear. Service / Inspection For quality assurance, the following work is carried out on the offered systems: - Function check and replacement of necessary components - If required, refilling with legally compliant refrigerant - Leak test with certificate - Documented test run following successful inspection Scope of delivery - Weiss WT-1000/70/5 temperature test chamber - Accessories as shown Credpsy D Nyuefx Akcsb Notes - Connection via 400 V three-phase power required - Shipping by freight carrier required due to size and weight - Sale from commercial inventory - All information subject to change - Prior sale reserved - For further information, feel free to contact us.

Condition: excellent (used), Year of construction: 2015, overall weight: 250 kg, volume flow: 1,000 m³/h, Vacuum pump BUSCH WV 1000 C OS1 – 1000 m³/h – complete on frame Technical data – pump: Manufacturer: Busch (Switzerland) Model: WV 1000 C OS1 Capacity: 1000 m³/h Rotational speed: 3000 rpm Medium: Oxygen Service – OS1 Oil: Busch YLC 250 B Oil capacity: 2.4 l Year of manufacture: 2015 Pump weight: 250 kg Certificates: CE Electric motor: Manufacturer: LAFERT (Italy) Rated power: 7.5 kW Power supply: 3~ Standard: IEC 60034 Efficiency class: IE2 Crodpfxey Dqcke Akcjb Protection: IP55 Speed: 2940 rpm Technical condition: Complete unit (pump + motor + piping), very good visual condition, normal signs of use, from the dismantling of an industrial installation, not refurbished – original, robust industrial build. PUMP / VACUUM / COMPLETE / FUNCTIONAL

Year of construction: 1999, condition: ready for operation (used), An automatic single-head underfloor saw Emmegi including a chip extraction system is available. Cutting angle: 90°, feed travel: 0mm-1000mm, positioning accuracy: +/-0.5mm, saw blade diameter: 500mm, motor power: 6.6kW, weight: approx. 1000kg. An on-site inspection is possible. Crjdpfx Aeyz Apqekcob