Used Karstens Ase A 650 for sale (68,921)

Condition: ready for operation (used), Grinding length: 650mm, center height: 150mm, grinding wheel dimensions: 400x80x127mm, sleeve diameter with Mk 4 seat: 50mm, weight: 2.9t, including belt filter, electrical circuit diagrams and hydraulic diagrams, an on-site inspection is possible. Bljdpfxjp T Upho Adrji

Condition: good (used), Year of construction: 1970, functionality: fully functional, Data : Tip width 300 mm Tip height 150 mm Bodpey Hdmzofx Adrsli External grinding spindle 4.0 kW Grinding wheel max. 400 x 80 x 127 mm Spindle cone MK4 Workpiece headstock 0.55 kW Workpiece speeds 30 - 450 rpm Internal grinding spindle 1.5 kW

Condition: good (used), Year of construction: 1974, Digital display Blsdpfxewpya Ns Adrsi Grinding diameter 250 mm Grinding length 650 mm Accessories

Condition: used, Year of construction: 1999, grinding diameter 360 mm grinding length 650 mm centre height 180 mm Bodet Hw A Hjpfx Adreli Control SIEMENS 840 D total power requirement 15 kW weight of the machine ca. 9500 kg dimensions of the machine ca. m

Condition: as good as new (ex-display), Year of construction: 2026, Karstens K11 650 Premium Retrofit Round Grinding Machine Manufacturer: Karstens Technical Specifications: Center distance: 750 mm Center height: 180 mm / (250 mm = Option) Workpiece weight: 100 kg cantilevered, 250 kg between centers Grinding wheel diameter: 400 mm or 500 mm (external grinding wheel) Workpiece spindle: MK 4, speed continuously adjustable 30-450 rpm, swivel range 0 - 90 ° Tailstock: MK4, quill stroke 45 mm, cylindrical correction Quill force: 200-600 N manually, (up to 2500 N possible, adjustable = Option) Table inclination: 12.5 degrees Travel of the feed spindle: 80 mm Rapid traverse: 50 mm Rough adjustment with air cushion: 280 mm Grinding spindle motor, external: 4 kW / (5.5 kW = Option) Continuously adjustable grinding wheel speed with potentiometer Grinding spindle motor, internal: 2.2 kW Workpiece spindle motor: 1.1 kW Hydraulic motor: 1.5 kW Lubrication motor: 0.1 kW Hydraulic tank: 80 liters Machine weight: Net 3500 kg Feed drive via DC motor Air cushion-supported rapid adjustment of the grinding spindle head for quick and safe positioning to the grinding location. Separate drive for the spindles for external and internal grinding. Fully automatic operating sequence, feed movement via wind rose switch: Rapid traverse forward, rapid traverse backward, grinding operation, feed stop, incremental feed. Automatic longitudinal grinding cycle Central coolant supply for all grinding points Workpiece spindle head with continuously adjustable drive with a co-rotating and lockable spindle. Feed control, digital with Siemens panel and Siemens PLC Bljdsiv Audspfx Adrji for longitudinal grinding and plunge grinding, input for retraction, feed increments, feeds, dwell times, idle strokes, compatible with the old Karstens feed control, with color Siemens touch panel Scale in X and Z axes, manufacturer HEIDENHAIN. Similar to Weiss / EMAG / GP round grinding machines / Studer / Kellenberger / Schaudt / Tschudin / Tacchella / Dannobat / Bahmüller / Fortuna.

Condition: as good as new (ex-display), Year of construction: 2026, Center height: 181 mm Center distance: 650 mm Maximum grindable workpiece diameter: 360 mm Max. load (overhung): 1000 N / 100 kg Max. load (between centers): 3000 N / 300 kg Z-axis Table swivel angle: 10° Table drive hydraulic: 0–4 m/min X-axis Cross slide travel: 80 mm Blsdpfxetqf Sqe Adroi Rapid traverse (hydraulic): 50 mm Coarse positioning—air cushion: 280 mm Infeed drive via DC motor Rapid feed rate: 48 mm/min/Ø Infeed process: Plunge / Longitudinal grinding 4 pre-selectable feed rates: mm/min/Ø 0.01–48 4 pre-selectable infeed increments: mm/ 0.001–0.1 Spark-out during end stop grinding: s 0–99 / 0–99 strokes Jog infeed: mm/Ø 0.001 Grinding spindle headstock—universal, swiveling: degrees 0–180 Grinding wheel (external): D x width x bore mm 500x100x127 or 203.2 Grinding wheel (face, option): D mm 250x32x76.2 Grinding wheel (internal, option): D mm (2–250) Drive power (external, face): kW 5.5 (7.5) Drive power (internal): kW 2.2 Peripheral speed (external): m/s 35 (50) Grinding wheel wear (external): mm/Ø 160 Wheel guard width: mm 100 Grinding spindle diameter: mm 60 Internal spindle mount: mm 80 (100) Workpiece headstock: Infinitely variable drive, MK 4: 1/min 30–270/ 50–450 Workpiece spindle lockable Spindle mount: mm MK 4/24 Spindle nose for flange mounting: MK 4 mm cylindrical Ø63H6 x 6 Workpiece headstock swivels on the rotary part: degrees 0–90 Tailstock: Quill mount / quill diameter: mm MK 4/750 Quill stroke mm: 45 Quill force N: 100–800 / 250–1400, adjustable Quill actuation: manual (foot switch) Quill fine adjustment: ±40μm Connections: Total power requirement of the machine: kW 6.5–10 Grinding spindle headstock: kW 5.5 (7.5) Workpiece headstock: kW 0.55 (1.1) Coolant cleaning: kW 0.75–2.2 Guideway lubrication pump: kW 0.1 Hydraulic pump: kW 1.5 Hydraulic tank: liters 80 Pneumatics: bar 6 Similar to Weiss/ EMAG/ GP cylindrical grinding machines/ Studer/ Kellenberger/ Schaudt/ Tschudin/ Tacchella/ Dannobat/ Bahmüller/ Fortuna

Condition: refurbished (used), Year of construction: 2026, Karstens K11 650 This cylindrical grinding machine has been completely overhauled by PS-Karstens. The machine has been inspected and is in very good condition. Since we specialize in Karstens cylindrical grinding machines, we can offer you complete service (electrical and mechanical) for the machine after purchase. Technical data: Distance between centers: 650 mm Distance between centers: 180 mm Bljdpfoh Rixxjx Adroi Workpiece weight: 100 kg cantilevered, 250 kg between centers Grinding wheel diameter: 400 mm Workpiece spindle: MK 4, speed continuously adjustable 30-450 rpm, swivel range 0 - 90 ° Tailstock: MK4, quill stroke 45 mm, cylinder fine adjustment Quill force: 200-600 N, hydraulically operated via foot pedal Table inclination: 10 degrees Adjustment travel of feed spindle: 80 mm Rapid traverse: 50 mm Rough adjustment with air cushion: 280 mm Grinding spindle motor external: 4 KW Grinding spindle motor internal: 2.2 KW Workpiece spindle motor: 0.55 KW Machine weight: Net 3800 Kg Feed drive via DC motor Air cushion-supported rapid adjustment of the grinding spindle head for quick and safe positioning to the grinding position. Separate drive for the spindles for external and internal grinding. Fully automatic process, feed movement via jog shuttle switch: Rapid traverse forward, rapid traverse backward, grinding operation, feed stop, incremental feed. Automatic longitudinal grinding cycle Central coolant supply for all grinding points Workpiece spindle head with continuously adjustable drive with a rotating and lockable spindle. Feed control for longitudinal grinding and plunge grinding, input for retraction, feed amounts, feed rates, dwell times, non-cutting travel Paper band filter system approx. 250 L Similar to Weiss/EMAG/GP cylindrical grinding machines/ Studer/ Kellenberger/ Schaudt/ Tschudin/ Tacchella/ Dannobat/ Bahmüller/ Fortuna

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, center height: 180 mm, workpiece weight (max.): 70 kg, center width: 650 mm, grinding wheel diameter: 400 mm, workpiece weight between centers: 250,000 g, The machine has been fully repaired and inspected by the seller! TECHNICAL DETAILS Working Area - Distance between centers: 650 mm - Center height: 180 mm - Workpiece weight: max. 70 kg (overhung) / max. 250 kg (between centers) - Grinding wheel diameter: 400 mm Workpiece Spindle - Mount: MK4 (Morse taper 4) - Speed: 30 - 450 rpm - Swivel range: 0 - 90° - Motor power: 0.55 kW Bedpfx Adswy Rnfsrsli Tailstock - Mount: MK4 (Morse taper 4) - Quill stroke: 45 mm - Quill force: 200 - 600 N Adjustment Travels and Settings - Table swivel angle: 10° - Infeed spindle travel: 80 mm - Rapid traverse: 50 mm - Coarse adjustment with air cushion: 280 mm MACHINE DETAILS Drives - External grinding spindle motor: 4 kW - Internal grinding spindle motor: 2.2 kW Weight - Machine weight: 3,600 kg EQUIPMENT - Air-cushion supported rapid adjustment of grinding spindle headstock - Separate drive for external and internal grinding spindles - Fully automatic operation with rotary switch - Automatic longitudinal grinding cycle - Central coolant supply for all grinding positions - Workpiece spindle stock with stepless drive control - Infeed control for longitudinal and plunge grinding

Condition: refurbished (used), Year of construction: 2024, functionality: fully functional, center height: 180 mm, workpiece weight (max.): 70 kg, center width: 650 mm, grinding wheel diameter: 400 mm, Equipment: rotational speed infinitely variable, Fully overhauled cylindrical grinding machine, year of manufacture 2024! No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Bodpfowy Ufujx Adrjli Centre distance: 650 mm Centre height: 180 mm Workpiece weight: 70 kg (unsupported), 250 kg (between centres) Grinding wheel diameter: 400 mm Workpiece Spindle and Tailstock Workpiece spindle: Morse taper 4 Spindle speed: steplessly variable, 30–450 rpm Swivel range: 0–90° Tailstock: Morse taper 4 Quill stroke: 45 mm Quill force: 200–600 N Axes and Adjustments Table swivel: 10° Infeed spindle travel: 80 mm Rapid traverse distance: 50 mm Coarse adjustment, air cushion: 280 mm MACHINE DETAILS Motor External grinding spindle motor: 4 kW Internal grinding spindle motor: 2.2 kW Workpiece spindle motor: 0.55 kW Machine weight: 3,600 kg FEATURES Infeed drive via DC motor Air-cushioned rapid adjustment of grinding spindle headstock Separate drive for external and internal grinding spindles Fully automatic operation: rapid advance, rapid return, grinding cycle, infeed stop, mym infeed Automatic longitudinal grinding cycle Central coolant supply Infeed control for longitudinal and plunge grinding

Condition: used, machine/vehicle number: 005642, Position 1: Panel Feeding and Loading IMA + MEINERT-COMBIMA/II/650/A/R3 Position 2: Double Sided Squaring/Edgebanding Machines IMA + MEINERT-COMBIMA/II/650/A/R3 Position 3: Panel Turning Device IMA + MEINERT-COMBIMA/II/650/A/R3 Position 4: Double Sided Squaring/Edgebanding Machines IMA + MEINERT-COMBIMA/II/650/A/R3 Position 5: Panel Turning Device IMA + MEINERT-COMBIMA/II/650/A/R3 Position 6: Panel Stacking and Offloading IMA + MEINERT-COMBIMA/II/650/A/R3 Bjdpfxowuciws Adreli

Condition: used, machine/vehicle number: 005637, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Combination Squaring Edgebanding Machine: First Pass Bljdpfxjvw Ev Ho Adrsi Max Panel Width: 1300 mm Max feed speed: 50 m/min Operating Units Right Side: 11 nr Operating Units Left Side: 12 nr

Condition: like new (used), Year of construction: 2023, functionality: fully functional, CNC Siemens 828 D Year 2023 • Max. diameter: 400 mm • Max. workpiece length: 550 mm • Axis travel: X-axis: 240 mm Z-axis: 600 mm Y-axis: +/- 60 mm Sauter 12-position BMT Sub-spindle Full specification available as PDF file Bledpfx Ajy Nzc Ejdrsi

Condition: used, Year of construction: 2015, operating hours: 5,396 h, Equipment: all wheel drive, CASE Crawler Type: 1650M Empty weight: 19,200 kg Power: 122 kW Operating hours: 5,396 Equipment: - Heated seat - Air conditioning - Radio - Rear ripper with 3 teeth - Front-mounted cabin protection devices and grilles - Dozer blade (hydraulically foldable) Bledpfx Adjzhyrmsroi We would also be happy to assist you with financing/leasing options through our partners. All information without guarantee. Errors and prior sale excepted.

Condition: good (used), Perfecta 92 TS ASE Paper Cutting Machine Bjdszgdaxspfx Adrjli The machine is in very good condition, manufactured in 2011. This machine features a waste removal system. A unique machine on the market. Owned by the same company since new. Under a service contract until the very end. Technical Specifications: Cutting Width: 920 mm Stack Height: 120 mm Weight: 2000 kg Power Supply: 400V Equipment: – ASE Automatic Waste Removal System with conveyor belt (automatically divided work table) – Programmer with 19” touchscreen monitor – CIP-3 and CIP-4 operation, cutting visualization on the monitor – Memory expansion via USB, network connectivity – Photocells – Air table – Cutting line – Chrome-plated table surface – Enlarged side tables – Servo-driven rear saddle control – super-fast operation, always stops at „0” – Hydraulic clamp with smooth force adjustment – User’s manual – Tool set – Press plate – Tapping block – Spare knife

Condition: good (used), The scope of delivery includes: 1x partition panel, used Material color: gray-white Overall length: approx. 775 mm Bjdpfei Eu Dvex Adrsli Tube length: 650 mm + 5 mm plastic cap Cross-section: square tube 20 x 20 mm Opening dimension: approx. 103 mm Weight: 0.93 kg | per piece

Condition: repair required (used), Type AS - 900 Machine No. 74054 Centre distance 900 mm Centre height 150 mm Max. grinding wheel 400 x 80 x 127 mm Centre height 150 mm Centre distance 900 mm ..... Condition: The machine cannot be switched on! The following applies to this machine: Condition unknown! Scope of delivery as per attached images .... Bedpfoy St Irex Adrsli

Condition: excellent (used), Year of construction: 1980, Karstens K11 1000 This Karstens K11 comes from a university and has seen very little use. All cables and hoses in the wet area have been replaced. It has extremely few operating hours. Since we specialize in Karstens round grinding machines, we can offer you complete service (electrical and mechanical) for the machine after purchase. Blodpfx Ash Rit Esdroi Technical data: Center distance: 1000 mm Center height: 180 mm Workpiece weight: 70 kg cantilevered, 250 kg between centers Grinding wheel diameter: 400 mm Workpiece spindle: MK 4, speed continuously adjustable 30-450 rpm, swivel range 0 - 90 ° Tailstock: MK4, quill travel 45 mm Tailstock rest next to the Z-axis table Quill force: 200-600 N Table tilt: 12.5 degrees Adjustable travel of the feed spindle: 80 mm Rapid traverse: 50 mm Coarse adjustment with air cushion: 280 mm Grinding spindle motor (external): 4 KW Grinding spindle motor (internal): 2.2 KW Workpiece spindle motor: 0.55 KW Machine weight: Net 3500 kg Feed drive via DC motor Air cushion-supported rapid adjustment of the grinding spindle stock for quick and safe positioning of the grinding position. Separate drive for the spindles for external and internal grinding. Fully automatic working cycle, feed movement via a wind rose switch: Rapid traverse forward, rapid traverse backward, grinding operation, feed stop, mym feed. Automatic longitudinal grinding cycle Central coolant supply for all grinding points Workpiece spindle stock with continuously adjustable drive for both rotating and lockable spindle. Feed control for longitudinal grinding and face grinding, input for retraction, feed amounts, feeds, dwell times, clearance strokes Digital display for X-axis from Heidenhain Paper band filter system can be offered upon request. Similar to Weiss/EMAG/GP round grinding machines/Studer/Kellenberger/Schaudt/Tschudin/Tacchella/Dannobat .

Condition: new, We offer you spare parts of all kinds for your conventional or CNC Karstens / EMAG WEISS / GP cylindrical grinding machine—covering your tailstock, workpiece headstock, grinding spindle headstock, ball screw spindles, glass scales, grinding wheel flanges, drive motors, axis drives (BOSCH SIEMENS), ECKELMANN controls, bellows, bearings, K11/K21 infeed controls (new and used), as well as Z-axis reversing blocks for exchange. We service machines from year of manufacture 1955 onwards: ASA-ASE-K10-K11-K12-K13-K16-K19-K21-K22-K23-K24-K25-K26-K27-K28- K29-K33-K35-K37-K50-K51-K52-K53-K57-W11-W21-GP cylindrical grinding machines—all assemblies based on Karstens design. Comparable/ EMAG-WEISS/ GP cylindrical grinding machines/ Studer/ Kellenberger/ Schaudt/ Tschudin/ Tacchella/ Dannobat. Bedpsup Aikefx Adrsli

Condition: new, We offer all types of spare parts for your conventional or CNC Karstens/GP cylindrical grinding machine, including components for your tailstock, workpiece spindle head, grinding spindle head, ball screws, glass scales, grinding wheel flanges, drive motors, axis drives (BOSCH SIEMENS), bellows, bearings, K11/K21 infeed control systems—new and used—as well as reversing blocks for the Z axis on an exchange basis. Also suitable for similar Weiss/EMAG/GP cylindrical grinding machines, Studer, Kellenberger, Schaudt, Tschudin, Tacchella, Dannobat, Bahmüller, Fortuna. Blodpfx Aderaibvjrji

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: semi-automatic, controller manufacturer: PFEIFER technology, laser type: fiber laser, laser power: 6,000 W, laser wavelength: 1,064 nm, pipe diameter (max.): 160 mm, pipe length (max.): 7,500 mm, table length: 6,500 mm, type of input current: three-phase, type of cooling: water, compressed air connection: 13 bar, overall weight: 5,500 kg, total length: 14,800 mm, total width: 2,900 mm, total height: 2,525 mm, warranty duration: 24 months, year of last overhaul: 2026, working range: 7,500 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, fume extraction, safety light barrier, PFEIFER technology skyTUBE Pro 6500 X3 – Profile and Tube Laser Centre 6500 x 15–160 mm with bevel cutting up to 50° skytube-pro-6500 X3 Profile and Tube Laser | Fiber Laser Metal Cutting for fast material change with up to 6kW — the smart and efficient tube laser processing solution for your production! Designed for round tubes, square tubes, rectangular tubes, open profiles, and special profiles. This laser cutting machine delivers maximum productivity, especially during production changeovers. The task: fiber laser up to 6kW for a wide range of metalworking applications. Unmatched Laser Cutting Performance High axis speeds and accelerations, paired with a stable mechanical structure, provide excellent cutting performance and accuracy. The tube and profile laser processing machine for production — space-saving and simply smart! Innovative solutions 100% made in Saxony! Tubes and profiles from 15 x 15 to 160 x 160 mm 3D cutting with efficient fiber laser technology The semi-automatic 6-fold profile tube loading chain system enables fast job changeovers. With the optional bundle loader, you can work completely independently. Bevel Cutting A function that changes everything. With our machine’s ability to swivel its cutting head up to 50° on an additional fifth axis, we address one of the biggest challenges in modern profile machining. If the laser beam always strikes the tube perpendicular to the surface, the cut edge will be elliptical. Swiveling the tube laser’s cutting head, combined with the feed axis, enables true bevel cutting. With the skyTUBE Laser, you are always on the safe side! The skyTUBE Pro is a class 1 laser system — there is no risk of exposure to laser radiation or reflections during operation. For all our laser systems, safety and compliance with the highest standards and regulations are paramount. Technical Features: · Closed industrial housing, class 1 or optionally class 4 laser · Working area, tube cutting system/clamping system: uniform tubes 15 to 160 mm, rectangular tubes 15 x 15 – 110 mm · Working area on tube X 6500 Y ±100 Z 150 A ±360° U ±50° · Automatic material feeding: up to 6 x 160 mm profiles, 3500–7000 mm lengths · Automatic material unloading system for profile sections, design matched to profile lengths · Z drive system: ball screw axis system with PTI SVZ system · X/Y drive system: linear axis system with PTI AC-SERVO system · Productive cutting speed: up to 50 m/min depending on material and laser combination (1.4G) · Software resolution: up to 2500 DPI · Repeatability: ±0.03 mm Blodpfx Aeyh A Nyedrsi · Maximum footprint (W x D x H): 11,600 mm x 2,830 mm x 2,100 mm + unloading system, depending on required profile cut length. With standard version and 4.5 m automatic unloading, the total length is approx. 14,800 mm.

Condition: new, Year of construction: 2026, functionality: fully functional, working range: 6,500 mm, type of input current: three-phase, total width: 1,629 mm, total height: 2,525 mm, total length: 10,500 mm, table length: 6,500 mm, overall weight: 5,500 kg, power: 15 kW (20.39 HP), laser power: 6,000 W, warranty duration: 24 months, Equipment: cooling unit, safety light barrier, PFEIFER technology skyTUBE Pro 6500 X3 – Profile & Tube Laser Center 6500 x 15 – 160 mm Format skytube-pro-6500×3 Profile and Tube Laser Fiber Laser Metal Cutting – fast material change with up to 6kW, delivering effective performance for your production, is the smart and efficient tube laser processing solution. Capable of laser cutting round tubes, square tubes, rectangular tubes, open profiles, and special profiles, this laser machine ensures maximum productivity during production changeovers. Task: Fiber laser up to 6kW for a wide range of metalworking applications! Unrivaled Laser Cutting Performance High axis speeds and accelerations, combined with a robust mechanical structure, ensure outstanding cutting performance and precision. The tube and profile laser processing machine for production offers a compact footprint – simply smart! Ingenious solutions, 100% made in Saxony! Tubes and profiles from 15 x 15 to 160 x 160 mm – 3D cutting with efficient fiber laser technology. The semi-automatic 6-position profile-tube loading chain system allows fast job changes. With the optional bundle loader, you work independently. Bevel Cutting A revolutionary feature. With the ability of our machines to swivel their cutting head up to 50° on an additional fifth axis, we provide the solution to one of the biggest challenges in modern profile processing. If the laser beam always strikes the tube at a right angle, you end up with an elliptical cut edge. With the capability to swivel the tube laser cutting head, together with the feed axis, completely angled cuts are now possible. Of course, when working with the skyTUBE Laser, safety comes first! The skyTUBE Pro is a Class 1 laser system. There is no risk of contact with laser emissions or reflections during operation. For all our laser systems, nothing is more important than complete safety and compliance with the highest standards and directives. Bodpfx Adorh Iw Tsrsli Technical Specifications: · Closed industrial housing, Class 1 laser (optionally Class 4) · Working area, tube cutting system/chuck: Round tubes 15–160 mm, rectangular tubes 15 x 15 – 110 mm · Working area on the tube: X 6500 mm, Y ±100 mm, Z 150 mm, A ±360°, U ±50° · Automatic material feed: up to 6 x 160 mm profiles, lengths 3500–7000 mm · Automated material unloading system for profile sections, construction adjusted to profile length · Z drive: ball screw axis system / with PTI SVZ system · X/Y drive: linear axis system / with PTI AC-SERVO system · Productive cutting speed: depending on material and laser combination, up to 50 m/min / 1.4G · Software resolution: up to 2500 DPI · Repeatability: ± 0.03 mm · Max. footprint dimensions (LxWxH): 11,600 mm x 2,830 mm x 2,100 mm + unloading system according to profile section length

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, input voltage: 230 V, working width: 650 mm, temperature: 140 °C, VIVID Matrix DUO MD-650 Working width 650 mm Double-sided laminator Bedpfx Adszia Azereli Adjustable speed Adjustable temperature

Condition: good (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 665182, travel distance X-axis: 650 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, total height: 2,850 mm, total length: 3,300 mm, total width: 2,400 mm, overall weight: 9,000 kg, spindle speed (max.): 42,000 rpm, number of slots in tool magazine: 40, Equipment: documentation/manual, OPS INGERSOLL SPEED HAWK 650 CNC machining center - Important note: the spindle was replaced in 2025 for approximately EUR 40,000, therefore, very few spindle hours! - Pallet dimensions: approx. 320 x 320 mm - The pallets are clamped onto the rotary table. - Tool holder: HSK-E 40 - For further technical data, see the images. - Includes technical documentation. Bljdpfxoy Tvcus Adrji - Includes HSK-E 40 tool holders and three pallets. Attention: The item must be collected between July 21st and July 23rd, 2026, on a date to be agreed upon. FCA D-80339 Munich - loaded onto a truck.

Condition: used, all stainless steel electrically heated, 90 kW Bljdpfxezg U Due Adroi net belt length 3.000 mm net belt width 600 mm frying time min/max : 25/250s with lower and upper belt sediment removal system lifting unit with electrical hoists dimensions (l x w x h) : ± 6.092 x 2.365 x 1.985 mm suitable for fire protection weight : 2.750 kg oil level control circulation pump with Teflon infeed belt

Condition: new, carrying capacity per cantilever arm: 650 kg, shelf height: 4,000 mm, total length: 4,000 mm, total width: 1,480 mm, load capacity per stand: 1,950 kg, Specifications: - H: approx. 400 cm - D: approx. 148 cm - L: approx. 400 cm - Cantilever arms: approx. 120 cm including 8 cm front deflector - Axis dimension: 130 cm Bledjzhr D Iopfx Adrji - NEW, immediately available from stock. - 650 kg load capacity per arm - 1950 kg load capacity per upright - Uprights in RAL 7016. - Cantilever arms in RAL 3000 - Arms are hooked in. - Arms adjustable in 100 mm increments. - Levels: Base + 3 storage levels (4 storage levels) The uprights in this shelving set are prepared for possible conversion to double-sided use free of charge. For the advantages of a hooked cantilever arm, see illustrations. Shelf consists of: - 4 uprights, including base section approx. 400 cm, made of IPE180. - 12 cantilever arms, approx. 120 cm, made of 10 cm x 4 cm profile. - Includes all necessary fasteners and screws. Price: €1,995.00 net €2,374.05 gross You will receive an invoice with VAT. Accessories such as ground anchors, collision protection, etc. can also be purchased from us. Transport: Delivery is available upon request through our partner shipping company; costs depend on the zip code. Installation: Our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment if required. Our recommendation: Let us know your needs... We are happy to assist you with the implementation of your projects, from planning and ordering to installation.