Used Grob-Werke Cold Rolling Machine for sale (69,071)

Condition: used, Year of construction: 2015, overall weight: 16,000 kg, total height: 2,200 mm, total length: 4,410 mm, total width: 2,600 mm, GROB C6-A – Cold Rolling Machine Technical Data: Gear Module: up to approx. 2.3 Gear Diameter: approx. 8–80 mm Max. Clamping Diameter: approx. 315 mm Power: 25 kW Weight approx.: 16,000 kg Chedpfez E Ra Hox Afgjc Dimensions (LxWxH) approx.: 4410 x 2600 x 2200 mm Year of construction: 2,015 Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: No

Condition: used, Year of construction: 2014, Control Heidenhain x-travel 1.000 mm y-travel 1.100 mm z-travel 1.040 mm tool taper HSK 63 number of tool places 338 Pos. Condition: Used Technical features & accessories: - TM218 tool changer - KNOLL FKA/750 cooling unit - KNOLL KF220 belt filter - KNOLL 850K-1 chip conveyor Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Chodpfxoz Hz N Ie Afgjc Subject to change and errors in technical data and specifications; subject to prior sale.

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Chodpfx Afjuz If Nogsc Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Year of construction: 1998, condition: excellent (used), machine/vehicle number: ExCello Serial Number 3888, MICHIGAN Rotoflo Type 3237 Cold Forming Machine. Original Serial Number: 4590 ExCello Serial Number 3888 New 1975 rebuilt by ExCello late 1990’s Country of Origin: USA For the coldforming of profiles for serrations (straight or angular), spiral teeth, oil grooves, threads and knurls. Capacity: Maximum slide stroke 1065 mm Chedpfjfnk Ehox Afgec Maximum rack length 915 mm Maximum profile diameter 50 mm Maximum profile length 125 mm Standard module range 0.3 to 1.25 Motor size 15 kW Hydraulic tank capacity 1000 l Overall floorspace width of machine 5014 mm Width of machine 2768 mm Depth with outboard support 4165 mm Height 2000 mm Approximate weight of machine 11,700 kgs Complete with: Hydraulically operated outer support assembly to accommodate part length universal headstock, Universal rack holding feature.

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: G551-1586, travel distance X-axis: 800 mm, travel distance Y-axis: 770 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 16,000 rpm, position of the milling head: Horizontal, table load: 1,000 kg, overall weight: 22 kg, input voltage: 400 V, Equipment: documentation/manual, GROB G550 / G551 5-axis machining center with TM167 tool magazine and Schuler LoadMaster LMC 900 Price upon request Important conditions: Please note that the sale of this machine is only possible under the following conditions: • Sale exclusively to end-users/manufacturing companies (no resale to dealers) – corresponding company profile required • Sale only within Germany or the EU • Inclusion of a dual-use statement in the purchase agreement (legally required) Sales/Transfer conditions: • Dismantling, removal, and transport are the responsibility of and at the risk of the buyer. Cjdpfx Aozxf Hksfgohc • The buyer is responsible for personnel, tools, and transport equipment. Personnel may only work with appropriate personal protective equipment, and only trained personnel may be used. Technical data Manufacturer: GROB-WERKE GmbH & Co. KG Model: G550 / G551-1586 Machine type: 5-axis universal machining center Year of construction: 2015 Control system: Siemens Sinumerik 840D Axes: 5 Tool holder: HSK-A63 Spindle speed: 16,000 min⁻¹ Spindle power: 35 kW Spindle hours: approx. 19,125 h X-axis: 800 mm Y-axis: 770 mm Z-axis: 500 mm Measuring probe: Renishaw IKZ: 70 bar Tool management GROB TM167 additional tool magazine Year of construction: 2021 167 additional tool positions Total number of tool positions: 287 Fully integrated into the system Automation Schuler Automation LoadMaster LMC 900 Year of construction: 2015 Linear pallet changing system 9 pallet positions Beckhoff/TwinCAT control System is fully functional and ready for operation Condition The production cell is in good condition and has been in continuous operation. The machine has a relatively low number of spindle hours and is equipped with a TM167 additional magazine installed in 2021. According to the operator, there are no known defects. The system is ideally suited for the automated production of demanding 5-axis components in the following areas: Mechanical engineering Automotive industry Aerospace Medical technology Tool and mold making Scope of supply GROB G550 / G551 machining center GROB TM167 tool additional magazine Schuler LoadMaster LMC 900 9 pallets Documentation Inspection Inspection possible by appointment. The machine can be inspected while powered on. Location: Germany / Waiblingen If you are interested, we look forward to hearing from you so that we can discuss the further details. Keywords GROB G550, GROB G551, 5-axis machining center, Siemens 840D, TM167, tool magazine, Schuler LoadMaster, LMC900, pallet automation, HSK63, CNC machining center, 5 Axis Machining Center.

Condition: used, Year of construction: 2016, x-travel 800 mm y-travel 1020 mm z-travel 1020 mm Control SIN840D sl B - axis 360 x 0,001 ° A - axis -185 / +45 x 0,001 ° Csdpfxozy Saas Afgshc feed x-axis 1 - 65.000 mm/min feed y- axis 1 - 50.000 mm/min Feed z- axis 1 - 80.000 mm / min. rapid traverse X/Y/Z 60 / 50 / 80 m/min spindle turning speed - stepless 1 - 16.000 U/min power capacity at 100 % load 25,00 kW power capacity at 40 % load 32,00 KW max. torque at 40% / 100% load 206 / 159 Nm spindle diameter in front bearing 70 mm tool taper HSK-A63 tool magazin: 272 tool length - max. 400 / 465 mm tool diameter 68 mm tool diameter with 2 vacant positions 160 mm tool total weight 8,00 kg Chip to chip time 4,2 sec. size of pallet 630x630 mm workpiece weight 700 kg interference diameter 900 mm total power requirement 50,00 kW weight of the machine ca. 32,00 t dimensions of the machine ca. 10,00 x 6,00 x H3,50 m 5-axis machining center with SIEMENS Sinumerik 840D SL control, integrated KNOLL coolant, coolant through the spindle, chip conveyor, RENISHAW measuring probe, BLUM-Laser, GROB Spindle-diagnosis (GSD) Additional Tool-Magazine TM218, Pallett-Storage PSS630-R13-12

Condition: used, Year of construction: 2011, Control HEIDENHAIN iTNC 530 x-travel 600 mm y-travel 770 mm Cjdpfxsz Hz Nne Afgohc z-travel 800 mm spindle tunring speed 30.000 U/min Condition: Used The offer includes two GROB G350 machining centers from the years 2011 and 2013. Technical features & accessories: - Disc-type tool magazine with 40 tool positions - Auxiliary tool magazine TM171 with 171 tool positions - SCHULER LMC600 pallet storage system (3/4 module) - 27 pallet storage positions, 3-level - 1 rotary setup station - SCHULER Pilot control system - 2 KNOLL 500K-1/10 chip conveyors Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale!

Condition: used, Year of construction: 2016, Control Heidenhain x-travel 800 mm y-travel 1.020 mm z-travel 1.020 mm Condition: Used The machine has been overhauled by GROB. Technical features & accessories: - HYFRA cooling unit - KNOLL KF-220 belt filter - KNOLL 750K-1 chip conveyor - TM218-9 tool magazine - SCHULER LMC900 automatic pallet loader - 10 pallet stations Codpfx Afjz Hz Nhjgohc - Movable robot arm Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data/specifications, and prior sale.

Condition: used, Thread rolling machine, cold rolling machine, thread forming machine, profile rolling machine Manufacturer PEE-WEE, Type P 24 Q Serial No. LC2403099, Year of manufacture 2004 Rolling force, max. 24 tons Tool diameter, max. 200 mm Csdeh A S Htepfx Afgohc Rolling spindle diameter 69.85 mm Tool bore diameter 70 mm (nominal diameter) Receiving length, tool length, max. 180 mm Workpiece diameter, max. 50 mm Rolling spindle speed 22 - 44 - 95 - 190 RPM Hydraulic motor power approx. 3 kW Rolling drive motor power 5.5 kW Mains connection 400 Volt, 50 Hz - Swiveling rolling spindle for thread through-rolling - Rolling spindle speed in 4 stages via gear change - Hydraulic system integrated in the machine bed Space requirement L x W x H 2000 x 1750 x 2550 mm Weight approx. 3 tons Good condition Plunge rollers: The thread rolling tools with the same pitch as the workpiece form the thread by penetrating the workpiece up to the nominal diameter. The thread length is a maximum as long as the rolling tools are wide. Through-rolling tools: If the thread length is greater than the rolling tool width. Through-rolling tools have 3 sections - the inlet, the calibrating section, and the outlet. Grooved rollers have no pitch and are swiveled with the helix angle of the profile to be rolled. Helix rollers differ from grooved rollers by having a pitch in the profile. The sum of the helix angle and the swivel angle results in the helix angle in the workpiece.

Condition: used, Year of construction: 2011, Control Heidenhain x-travel 600 mm y-travel 855 mm z-travel 750 mm tool taper HSK 63 number of tool places 40 Pos. Condition: Used Technical features & accessories: - KNOLL 500K-1/10 chip conveyor (right-hand side) - BÄR TFK140 belt filter - ARO belt filter Cedez Hz Nzjpfx Afgjhc Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale!

Condition: used, Year of construction: 2012, x-travel 800 mm y-travel 950 mm z-travel 1020 mm Control SIN840D sl B - axis 360 x 0,001 ° A - axis -180 / +45 x 0,001 ° feed x-axis 1 - 65.000 mm/min feed y- axis 1 - 50.000 mm/min Feed z- axis 1 - 80.000 mm / min. rapid traverse X/Y/Z 60 / 50 / 80 m/min spindle turning speed - stepless 1 - 16.000 U/min power capacity at 100 % load 25,00 kW power capacity at 40 % load 35,00 KW max. torque at 40% / 100% load 223 / 160 Nm spindle diameter in front bearing 80 mm tool taper HSK-A63 Csdpfxezz Afcj Afgjhc tool magazin: 50 tool length - max. 400 / 465 mm tool diameter 72 mm tool diameter with 2 vacant positions 160 mm tool total weight 8,00 kg size of pallet 630x630 mm workpiece weight 700 kg interference diameter 900 mm total power requirement 50,00 kW weight of the machine ca. 26,00 t dimensions of the machine ca. 7,00 x 4,50 x H3,50 m 5-axis machining center with SIEMENS Sinumerik 840D SL control, integrated KNOLL coolant unit, sitchable to minimal quantity lubrication coolant through the spindle max. 80bar, chip conveyor.

Condition: used, Year of construction: 1987, rolling capacity max. NA t workpiece diameter 38 mm Chjdpst Hw D Defx Afgjc workpiece length 500 mm total power requirement 24 kW weight of the machine ca. 10 t dimensions of the machine ca. m Max.Ø tool slide stroke 760 mm Max.Ø rack length 610 mm Length of workpiece between centres, approx. 500 mm Max. tooth width / profile width 92 mm Max. workpiece Ø 38 mm Tailstock stroke on outboard support, hydraulic, approx. 500 mm Module range 0.3 - 1.3 Total electrical load, approx. 24 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features * KBH Workpiece Feed Device, standing parallel to the machine, at present set-up for feed-in and feed-out of shaft-formed workpieces, approx. Ø 16 x 200 mm long, with prism conveyor belt and lifting station for 2 shafts (blank and finished part), as well as workpiece positioning control. * Originally, external gears were formed on the machine using pinion cages (no. of teeth = 25), Ø approx. 32 mm x 14 mm long, workpiece Ø approx. 80 x 80 mm long. * Various accessories: * Separate switch cabinet. * Separate hydraulic unit, 900 l. * Coolant device in the machine. * Control panel with malfunction message in plaintext, etc. Roto Flo machines are ideal for mass production of smaller gears/profiles. The coldforming process is a lot faster and more economical than other chip removing methods. Workpieces are clamped between 2 live centres and 2 synchronous opposed directional coldforming racks simultaneously engage the workpart and start rotation. During rotation, the profile is formed successively within one stroke. In the calibrating zone, the profiling and surfacing performance of the tool are optimised. Profiles do not require a run-out. The coldforming process requires a rigid and heavy duty construction of the machine, which ensures the required precision over the years. Between 25,000 and 100,000 working cycles can be performed with one set of racks, also for serrations. Condition : Very good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.

Condition: used, Year of construction: 2020, controller manufacturer: Siemens, controller model: 840 Dsl - GROB4Pilot, _____ Description: Year of manuf. : 2020 Control : Siemens 840 Dsl - GROB4Pilot Speed : 16000 rpm Movement X/Y/Z : 1050/800/1050 mm Tool holder : HSK 63 In General: Year of manufacture:2020 Control system:Siemens 840 Dsl – GROB4Pilot Travel ranges X/Y/Z:1,050/800/1,050 mm Speed:16,000 rpm Tool holder:HSK 63 Fluid supply:coolant + blast air Spindle: Technology:Direct drive spindle Speed:16,000 rpm Max. torque:206 Nm Max. power:32 kW Tool holder:HSK 63 NC rotary table: Technology:NC rotary table with pallet clamping system B-axis:0.001° Pallet size:630 x 800 mm (630 x 630 mm) Fluid connections:6 Tool magazin: Technology:4-disc magazine Number of stations:237 Tool changer:Pick-up Codpfszu H Afsx Afgohc Tool cleaning:Mechanical Equipment: Position measurement systems:Direct on all axes (glass scales) Chip removal:Chip conveyor Coolant supply:Internal coolant system, 80 bar Hydraulic clamping:4 clamping circuits, 30–190 bar Support control:Pneumatic Touch probe:Renishaw OMP 60 Tool measurement:Length measurement Set-up bay door:Can be operated automatically or manually Emulsion mist separator:Mechanical Pallets I:2 pieces 630 x 800 mm Pallets II:2 pieces 630 x 630 mm

Condition: used, Year of construction: 2011, Control Siemens Sinumerik 840D sl centre height 1.150 mm z-axis 1.559 / 307 mm x-axis 16 - 80 mm Swing circle diameter 92 mm roll spindle turning speed range 0 - 3.000 U/min Rolling mill roll clearance - axial 0,025 mm feed speeds infinitely variable 0 - 30.000 mm/min rapid traverse 30.000 mm/min Swivel angle range ±3,2 ° Max. speed - main spindle 375 U/min Cedpfx Afozdk Iksgshc piston stroke 400 mm diameter of piston 90 mm with effective piston area 63,6 cm² In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: used, Thread rolling machine UPWS 25. Chedjzd Rf Nopfx Afgjc

Year of construction: 1980, condition: used, Rolling mill in working condition, designed for the production of hot-rolled metal products: reinforcing bars, rounds, squares, angles, flats, channels, and beams. Maximum initial blank diameter: 180 mm. It consists of a three-roll roughing stand with a diameter of 600 mm and five finishing stands with a diameter of 320 mm, as well as a calibrating three-roll stand with a diameter of 320 mm. High productivity. Cantilever-type rolling rolls are used. They are inexpensive to manufacture and can be quickly replaced when switching from one type of rolled product to another. Csdpfxoz Eq Nue Afgehc Location: Ukraine, Sumy. Dismantling and loading are included in the price.

Condition: used, Year of construction: 2007, Technical details: weight of the machine ca.: 11,2 t one spindle Chsdswi Nigspfx Afgec *

Condition: used, Year of construction: 2008, Control: HEIDENHEIN iTNC 530 Spindle: 35/47 Nm; 12,000 rpm Cjdpfx Afjz Dizmogshc Tool Holder: HSK-A 63 Tool Magazine: 40 positions (disc type) Travel (X/Y/Z): 600 / 770 / 805 mm The machine is currently in storage. The images shown may not reflect its current condition while in storage.

Condition: used, Year of construction: 2008, Control system: HEIDENHEIN iTNC 530 Spindle: 35/47 Nm; 12,000 rpm Tool holder: HSk-A 63 Tool magazine: 40 positions (disc type) Cjdez Diz Hspfx Afgohc Travel (X/Y/Z): 600 / 770 / 675 mm The machine is currently in storage. The images shown do not necessarily reflect its current condition while in storage.

Condition: used, Year of construction: 2009, Technical details: x-travel: 630 mm y-travel: 630 mm z-travel: 500 mm Cjdpfswdyyfsx Afgohc number of spindle speeds: spindle motor: 32 kW size of pallet: 500 x 500 mm b-axis: 36000 x 0,001 ° no. of workpieces in the magazine: 61 Stück tool taper: HSK 63 weight of the machine ca.: 15 t Single-Spindle Mechanical processing cylinder head VR6 *

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, machine/vehicle number: S2909535010029, travel distance X-axis: 600 mm, travel distance Y-axis: 770 mm, travel distance Z-axis: 805 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK ONE, spindle speed (max.): 16,000 rpm, coolant supply: 40 bar, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Highlights: - powerful Motorized spindle HSK-A 63, 16,000 rpm - prepared for automation - IKZ 40 bar _____ Basic machine G350 access-SERIE Travel path of the X-axis 600 mm Travel path of the Y'-axis 770 mm Travel path of the Z-axis 805 mm Csdpex Ewfzjfx Afgehc Power supply 400 V, 50 Hz, TN-S Decentralized work area mist collector 800 m³ Work area door, automatic, for manual and automatic loading/unloading Stainless-steel internal work area enclosure Fluid cabinet doors SIEMENS SIEMENS SINUMERIK ONE Swivel axis calibration GSC Advanced connection of an automation system - standard interface version 1.7 (GROB) Technology package SINUMERIK MDynamics - milling (SIEMENS) Rotary table with pallet clamping system GROB (B-axis, 5-axes) Motorized spindle HSK-A 63, 16,000 rpm, 159/206 Nm, 25/32 kW (GROB) GROB spindle diagnostics GSD Compact double disk-type magazine HSK-A 63 with 90 tool pockets Tool cleaning device Electromechanical tool breakage detection device Laser measurement system LaserControl NT LC50-DIGILOG, BLUM-NOVOTEST Pallet 400 x 400 mm, T-slots, without pallet changer hook Scraper conveyor, discharge height 1,100 mm High-pressure cutting fluid system (5-40 bar, IKZ) Continuous cooler for cutting fluid with an air cooled cooling unit (13 kW) Compressed air feed through spindle center External compressed air supply via a flexibly adjustable hose Cutting fluid recirculation on weekends Oil skimmer for cutting fluid care Air gun at the work area Flush gun at the work area Compressed air cleaner bar for safety screen in work area door Machine status light, 3-colored Machine accuracy package 1 for a machining center of the access series Radio touch probe RMP400 (RENISHAW) Remote machine diagnostics with access control switch 12-month warranty

Condition: new, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, Highlights: - Powerfull motorizied spindle 16.000 U/min | 206 Nm - 227 tools in the magazin - High pressure cutting fluid system (80 bar) _____ Basic machine G440 Travels: X=800, Y=800, Z=800 mm Power supply 400 V, 50 Hz, TN-S Machine cooling system with a air-cooled cooling unit (20 kW) SIEMENS SINUMERIK 840D sl with machine control panel GROB4Pilot access Motorized spindle HSK-A 63, 16,000 rpm, 159/206 Nm, 25/32 kW, oil-air lubrication (GROB) GROB spindle diagnostics GSD Rotary table with GROB pallet clamping system (B-axis) Double disk-type tool magazine HSK-A 63 with 227 (47+10|50|60|60) tool pockets Tool cleaning device Electromechanical tool breakage detection device Pallet change system for two pallets Setup station rotated manually Setup station door, manually-operated, for manual loading/unloading Pallet, 500x500 mm, grid with tapped holes Equipping the pallet with 4 fluid connections Scraper-type conveyor, for larger quantities, discharge height 1,100 mm High-pressure cutting fluid system (10-80 bar, ICS) Compressed air feed through spindle center External compressed air supply via a flexibly adjustable hose Oil skimmer for cutting fluid care Flush gun at the work area Part clamping system in work area - KP1: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) - KP2: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) Chedpfxst Hrz Dj Afgec Part clamping system in setup station of pallet changer - KP1: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) - KP2: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) - KP3: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) - KP4: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) Preparations for using infrared touch probe OMP60 (RENISHAW) Rotating inspection glass for work area door Remote machine diagnostics with access control switch 12-month warranty

Condition: as good as new (ex-display), Year of construction: 2023, travel distance X-axis: 1,450 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,035 mm, Highlights: - fastest chip-to-chip time in this workspace dimension - Optimum footprint - Automation “ready” _____ G720F machining center X-axis travel = 1450 mm Y-axis travel = 1200 mm Z-axis travel = 1035 mm Interference diameter 1,500 mm (2x) table load 2x 750 kg Work area lighting Machine control Siemens Sinumerik ONE HT10 handheld control unit Motorized spindle 17,000 min-1, 64 Nm GROB spindle diagnosis (GSD) for twin-spindle machines Tool magazine, HSK-A-63 with 80 (2x40) tool pockets Tool loading lift for parallel loading and unloading of tools during machining time mechanic-tactile tool breakage check HSK taper shaft cleaning Air blow-off gun Inspection window for viewing the tool change area/tool robot Lighting in the tool change area/tool robot Minimum quantity lubrication unit for two spindles as single-channel Minimum quantity lubrication unit pressure booster Decentralized exhaust system MQL Scraper conveyor with wear plate Basic installation Clamping functionality Evaluation unit for monitoring support Cedpfx Aetiyzdsfgjhc evaluation unit for clamping monitoring - volume flow Preparation for process-related measurement (Renishaw) Renishaw RMP400 extra long measuring probe Loading, directly into the machine by the operator Two-hand operation, incl. automatic opening at the end of the cycle HVO console Preparation for direct loading into the machine by robot Machine status light

Condition: used, Year of construction: 2002, Technical details: spindle speed:: max. 12000 tool taper: HSK 80 . b-axis: 360 x 0,001 ° worktool support (A-axis): ° weight of the machine ca.: 25 500 Kgs. x-travel: 800 mm y-travel: 700 mm z-travel: 630 mm dimensions of the machine ca.: 6200 x 3000 x 3200 mm pallet size:: 500 x 500 mm no. of tools in the magazine: 61 Nos. Weight approx.: 23,5 t Codewdywdepfx Afgehc Horizontal Machining Center with CNC Control System SIEMENS 840 C in well maintained condition. Single spindle *

Year of construction: 2015, condition: used, diameter / mm Cutting (quantity) / weight 15000 kg Control Siemens 840D Production line - Modular Special Machine (MSM) with clamping device 1 double spindle machining centre Make: GROB Type: Special machine GM4650 Chsdpfxephu D To Afgjc Year: 2015 Control: Siemens, type 840D sl CO2 fire extinguishing system, air filter LTA, oil treatment, make: Ruez, type MBF-1000 AS, year 2015 - Operating hours 43,774, spindle hours 1,598 Technical data Machine length: 8400mm Machine width: 2500mm Machine height incl. LIP: 2150mm Machine weight: 15.000kg