Used Fasti Fasti 509-30-6 for sale (65,917)

Condition: used, Max. cutting length: 3,000 mm Max. sheet thickness: 6 mm steel Motorized backgauge with digital display up to 1000 mm Side stops and table extensions cutting length limitation Cutting edge lighting Hydraulic shear angle adjustment Lhjdpevmz Nbsfx Aamsl knife sharpened Weight: approx. 6500 kg

Condition: used, functionality: limited functionality, Year of construction: 2009, operating hours: 14,021 h, machine/vehicle number: 09528020, control type: CNC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Omron, working width: 3,040 mm, cutting angle (min.): 0.5 °, cutting angle (max.): 2 °, stroke rate (max.): 12 1/min, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 4 mm, back gauge adjustment: CNC-controlled, back gauge: 1,000 mm, back gauge speed R-axis: 330 mm/s, input voltage: 400 V, input current: 17 A, type of input current: three-phase, overall weight: 5,960 kg, total length: 3,706 mm, total width: 1,355 mm, total height: 1,955 mm, year of last overhaul: 2021, Equipment: centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, FASTI 528-30/6 hydraulic guillotine shear usable length 3040mm Year of manufacture 2009, demonstration unit purchased in 12/2011 Max. sheet thickness at 400 N/mm2: 4.0mm Max. sheet thickness at 700 N/mm2: 6.0mm CNC control FM5.1 additional blade for re-sharpening Machine serviced by the manufacturer's service department Ledpozi Uq Hjfx Aamjhl Machine in good working order, in continuous use, minor oil leak on the right cylinder Machine for sale due to a change in the machine park

Condition: used, Max. cutting length: 2540 mm Max. sheet thickness: 6 mm steel Mechanically adjustable rear stop (2 speeds) up to 1000 mm with analog display Side stops and table extensions cutting length limitation Lhedpfezl Dr Sjx Aamol Cutting edge lighting knife sharpened Weight approx. 5500 kg

Condition: good (used), Year of construction: 1990, machine/vehicle number: 5211, Offer 24289 Technical data: Lodpfxot Ucgas Aamehl - max. cutting width 3060 mm - max. cutting capacity at 45 Kp/mm² 4 mm - Cutting angle 1.50 ° - Cutting gap - adjustment via adjusting screws - Number of hold-down devices 15 pcs - Stroke rate 23 to 43 /min - Front angle stop - Motorized backgauge position-controlled 15 - 850 mm - Cutting line lighting - E - foot switch - Drive 400 V / 7.5 kW - Space requirement approx. W 3900 x H 1600 x D 2400 mm - Weight approx. 4.5 t

Condition: good (used), functionality: fully functional, Year of construction: 1994, Hydraulic Swivel Bending Machine Manufacturer: FASTI, Type: 212 – 20 – 6 Year of Manufacture: December 1993 / January 1994 Technical Data Manufacturer: Fasti Type: 212-20-6 Year of Manufacture: December 1993 / January 1994 Useful length: 2040 mm Sheet thickness: 6 mm Stroke: 500 mm Connected power: 12.42 kW Voltage: 400 V Number of phases: 3 Control voltage: 230 V AC // 24 V DC Rated current: 16.5 A Mains frequency [Hz]: 50 Installation dimensions: L 3.30 x W 2.80 x H 2.30 m Weight: approx. 6 t Equipment - Bending angle adjustment using a potentiometer and digital display - Sheet thickness adjustment (bending flange) using a push button and digital display - Controlled rear stop, 1000 mm with ball bearings, extendable to 1500 mm - 2 x sharp edge rails, 45° Lodjz Aqx Tjpfx Aamehl - 1 x sharp edge rail, 30° - Bending rails 16, 35, 10, 12, 15 mm - Gooseneck rail H 130 mm, segmented All information is without guarantee. The machine is characterized above all by its very simple operation. A demonstration is possible at any time in our showroom.

Condition: used, Year of construction: 1993, Max. cutting length: 4000 mm Max. sheet thickness: 4 mm steel Controlled rear stop up to 1,000 mm side stop and table extensions cut length limit cut edge illumination safety fence, roller with safety switches Weight: approx. 8500 kg Lhsdpfx Aef Nwvfeamel

Condition: used, Year of construction: 1992, Max. cutting length: 1250 mm Max. sheet thickness: 4 mm steel Lodpfxsy Dcdto Aamjhl Controlled rear stop Side stops and table extensions cutting length limitation Cutting edge lighting Light barrier for safeguarding the rear area knife sharpened Weight approx. 2800 kg

Condition: used, Max. cutting length: 4040 mm Max. sheet thickness: 4 mm steel Motorized adjustable backgauge with digital display up to 1000 mm Pneumatic sheet metal holding Side stops and table extensions cutting length limitation Cutting edge lighting Lhodpfx Aow Hygdsamol Weight approx. 7500 kg

Condition: ready for operation (used), Year of construction: 2019, operating hours: 9,356 h, punching force: 31 t, sheet thickness (max.): 6 mm, travel distance X-axis: 2,254 mm, travel distance Y-axis: 1,263 mm, CNC punching machine manufactured in 2019. This Euromac MBX 6 Plus 1250/30-2250 features a total of 24,439,006 hits and a total working time of 11,309 hours. It includes a CNC control system with a dedicated console and a brush table to prevent sheet scratching. If you are looking to get high-quality punching capabilities, consider the Euromac MBX 6 Plus 1250/30-2250 machine we have for sale. Contact us for further details. - Total Hits: 24,439,006- Total Working Time: 11,309 hours- Actual Punching Time: 4,708 hours- Control System: CNC with dedicated console and Logitech keyboard interface- Multitool Setup: Station 2, Code 1 (6MT01)- Oil Temperature: 22 °C- Power Supply: 50 Hz- Bed Type: Brush table to prevent sheet scratching Lhedpoy Sar Dsfx Aamsl

Condition: excellent (used), Year of construction: 1985, guillotine shear with rear stop and stacker design: hydraulic cutting length: max. 3.000 mm cutting length (stackable): max. 1.000 mm Lhedpfszdnx Hsx Aamjl cutting thickness: max. 6 mm

Condition: used, Year of construction: 1983, Max. bend length: 1640 mm Max. sheet thickness: 3 mm steel Manual and automatic bending process possible Lsdpfszvw Rpjx Aamjhl Bending angle adjustable via potentiometer Hub height of the upper gantry and material thickness adjustable via switch Manual backgauge with spring fingers Weight: approx. 1600 kg

Condition: used, Year of construction: 1990, plate width 2503 mm plate thickness 4.0 mm ST plate thickness 2.5 mm VA plate thickness 6.0 mm ALU number of strokes - loaded 15 - 20 Hübe/min cutting angle 1.7 ° work height max. 900 mm Control ELGO TYP 85 total power requirement 8.5 kW weight of the machine ca. 3400 kg range L-W-H 2913 x 2250 x 1760 mm Features: - Robust NC electro-hydraulic guillotine shear Lhsdpfoxabd Usx Aamsl - NC electro-motorized backgauge * with ELGO control unit - Manual cutting gap adjustment - Front support table including recessed grips - 1x sturdy side stop with scale and tilting cam - 2x sturdy front support arms - 1x freely movable foot switch - Front finger guard - Front emergency stop button - Operating instructions (PDF)

Condition: ready for operation (used), Year of construction: 1996, pressure 125 t chamfer lenght 3050 mm distance between columns 2550 mm ajustment speed 90.0 mm/sec working feed 10.0 mm/sec return speed 75.0 mm/sec stroke 140 mm dayligth 375 mm column arm 250 mm table width 90.0 mm work height max. ca. 950 mm Number of working hours 14.100 h total power requirement 13.5 kW weight 8500 kg range L-W-H 3630 x 2300 x 2505 mm From a maintenance workshop Good / well-maintained condition With only approx. 14.100 operating hours (!!) - in checked conditions - machinevideo - ?v=wtEBQ0UawQ8 Equipment: - CNC electro-hydraulic press brake - DELEM CNC control - model "DA 58" * Swiveling control panel, front left * 2D graphic programming & product display * Tool & program library Lodpfxexabk Io Aamohl - CNC-controlled axes: * Y1+Y2 / X1+X2 / R1+R2 / Z1+Z2 / CNC crowning - CNC electro-motorized backgauge (X axes) * Stop system with 2x CNC-controlled gantries - CNC electro-motorized height adjustment of the backgauge (R axes) - CNC electro-motorized adjustment of the stop fingers (Z axes) - Manual upper tool clamping - Manual lower tool clamping - Various split upper and lower tools - 2x stable, movable Front support arms - 1x freely movable 2-hand/foot control - Side guard (swinging doors) - Rear guard (swinging door) - Original operating instructions + control unit - Manufacturer's CE declaration

Condition: used, functionality: fully functional, Year of construction: 1969, machine/vehicle number: 506/10/2,5, control type: CNC control, degree of automation: manual, actuation type: hydraulic, working width: 1,030 mm, sheet thickness (max.): 2 mm, sheet thickness steel (max.): 2 mm, input voltage: 380 V, input current: 13 A, input frequency: 50 Hz, control voltage: 220 V, Used Fasti guillotine shear, model 506/10/2.5, year of manufacture 1969 Lodpfx Aaey Hhiajmohl

Condition: as good as new (ex-display), Year of construction: 2024, New hydraulic heating plate press Manufacturer: ITALPRESSE, Type XL/6 30-13 with gold-anodized plates Touch display control - Electric heating plates, 3,000 x 1,300 mm - Total pressure: 90 tons - Number of heating plates: 2 pcs. - Number of tiers: 1 pc. - Cylinder stroke: 350 mm - Tier opening: 350 mm - All-side loading - Number of pressure cylinders: 6 pcs. - Diameter of pressure cylinders: 85 mm - Power requirement of hydraulic unit: 3 kW - Electric heating plates made of solid, hard aluminum with built-in heating wires - Heating power: 22 kW - High-pressure insulation plates - Working temperature: 90° C - Max. temperature: 120° C - Operating voltage: 400 V/50 Hz - Safety regulations according to CE standard Standard equipment: - Movement of the press table with rack and pinion and parallel guides at 2 corners of the press table, made of self-lubricating material - Electronic control unit with touch screen for controlling and monitoring the machine - Digital timer for setting the pressing time and automatic opening - Digital input and monitoring of the pressing pressure - Digital timer for setting the pressing time - Digital diagnostics and display of error messages - Safety circuit with two-hand operation - Safety pull cord - Safety bracket for the lower press table Lodpodx R Tfefx Aamshl Integrated accessories: - Touch screen TS/400 - EFC Electronic flatness control - Gold-anodized heating plates (bus bars) Location: In stock at 54634 Bitburg - Immediately available -

Year of construction: 2024, operating hours: 2 h, condition: as good as new (ex-display), functionality: fully functional, DESTACO pneumatic power cylinder WK3000-30-6-1. Item no. 0576762. Piston force at 6 bar: 3000N. Max. clamping force: 30,000N. Further information available in the images. Purchased in 2024 for testing purposes only. Inspection is possible. Sold without warranty or return. Ledpfx Aasvb Di Temshl

Condition: excellent (used), Year of construction: 2011, Four-head welding machine URBAN, type AKS 6410/4, from left to right, maximum welding dimensions: 3,500 x 3,000 mm, WINDOWS control, weld bead limitation of 0.2 mm for colored profiles, pressure bar for sealing, designed for single-shift operation, technically overhauled and fully functional. Includes cooling table, L = 3.0 m, TBA (URBAN conveyor belt). Lhedpfx Aaoz Dk Nlomjl

Condition: used, functionality: fully functional, Single Temperiertechnik STW 1-6-30-M4 Temperature Controller. Lsdpewf Anhjfx Aamshl 4 for sale. 1 piece/300 EUR. Good working condition. Please check out our other listings as well.

Condition: good (used), Year of construction: 2008, 1 used surface grinding machine Manufacturer: STÖCKEL Type: FX 60/30 SPS Year of manufacture: 2008 Grinding area: approx. 600 × 300 mm Magnetic chuck: approx. 600 × 250 mm Speed: 1900 rpm Grinding height: 400 mm Drive power: 9 kW Operating voltage: 400 V / 50 Hz Table load: 250 kg Control: PLC Lhodpez Dkuusfx Aamol Weight: 3000 kg

Condition: good (used), Year of construction: 2001, functionality: fully functional, Manufacturer: Fasti GmbH Type: ERD 65 B Rated power: 0.9 kW Lhjdjvzwrbjpfx Aamel PRICE REDUCTION FROM 700 TO 550 EUR!!!

Condition: used, Rotor width: approx. 300 mm Lhsdpfxszy Hipe Aamsl Rotor diameter: approx. 300 mm Stator knives: 6 Rotor knives: 9

Condition: used, Max. bending length: 1020 mm Max. sheet thickness: 6 mm steel Upper wheel diameter: 150 mm Motorized rear roller delivery Right and left rotation via foot switch Safety rope pull switch Conical rounding possible Weight: 1200 kg Lhodpfx Aszl Dngoamjl

Condition: good (used), PLC control, central module, memory, CPU, central device, central unit, compact device Lodpsmrw U Ajfx Aamjhl -Manufacturer: Siemens, compact unit Simodrive -Type: D380/30 Mreg-GdG6V55-3A 6 RA 2718-6DV55-0AA0 -Quantity: 1 piece available -Dimensions: 270/170/H290 mm -Weight: 7.3 kg

Condition: used, CNC press brake FASTI, Type 904-125/30 Serial No. 95-904-5775 Year of manufacture 1995 Lsdpfshmmfkex Aamjhl Press force 125 tons Working length 3050 mm Stroke approx. 335 mm Stand distance 300 mm Distance between side stands 2550 mm Tool installation height max. 465 mm (opening width between tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Back gauge X-axis 500 mm Back gauge R-axis 115 mm Back gauge Z-axis approx. 1950 mm Lowering speed Y-axis rapid traverse 90 mm/s Lowering speed Y-axis working traverse 8.9 mm/s Return speed Y-axis retraction 75 mm/s Oil capacity approx. 160 liters Motor power 18.5 kW Mains connection 400 volts, 50 Hz, 20 amps - 7-axis CNC control DELEM, Type DA 58 with LCD screen - 1 axis for back gauge - gauge depth (X-axis) - 2 axes for back gauge - gauge height (finger R1 + finger R2) - 2 axes for back gauge - gauge fingers, laterally adjustable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or only 2-hand control panel - Hydraulic tool clamping for the upper tool system TRUMPF, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool shank 13 x 20 mm) - Safety light curtain FIESSLER, Type AKAS - 2 pcs material support arms, manually adjustable laterally and in height - Electrical diagram, hydraulic diagram, user manual for control system available - Control cabinet on the machine - Without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons Good condition

Condition: used, functionality: fully functional, Year of construction: 2017, control type: CNC control, Used LVD PHOENIX FL 3015 Fiber laser cutting machine in excellent condition for sale. This is a dynamic and versatile laser cutting machine designed for precise and fast cutting of various types and thicknesses of metal sheets. The reliable LVD construction, combined with the IPG Fiber laser source, ensures high cutting quality, performance, and low operating costs. The machine is fully functional and can be inspected and tested at our warehouse. Equipment: Automatic exchangeable work tables IPG Fiber laser source – 6 kW 10 kW laser cutting head LVD Touch-L control system Automatic focus adjustment Automatic nozzle changer Lodpfx Aaszhmtwsmohl Automatic nozzle calibration Automatic nozzle cleaning Nozzle magazine with up to 10 positions Automatic sheet position detection Automatic cutting gas selection (oxygen, nitrogen) Cooling system Fume extraction system Sheet cleaning comb Interface with sheet storage Technical specifications Manufacturer: LVD Model: PHOENIX FL 3015 Fiber Year of manufacture: 2017/08 Laser source: IPG Fiber Laser power: 6 kW Operating parameters Maximum sheet size: 3050 × 1525 mm X-axis travel: 3185 mm Y-axis travel: 1560 mm Z-axis travel: 130 mm Maximum table load: 750 kg Table change time: 35 s Maximum X-Y positioning speed: 140 m/min Repeatability accuracy: ±0.025 mm Maximum cutting thicknesses Structural steel (O₂): 30 mm Structural steel (N₂): 8 mm Stainless steel (N₂): 25 mm Aluminum (N₂): 25 mm Copper (O₂): 6 mm Brass (N₂): 12 mm Operating hours Power ON hours: 51,061 h Cutting hours: 24,262 h Application Ideally suited for sheet metal processing companies, metal structure manufacturers, ventilation system manufacturers, and manufacturers in the automotive, agricultural machinery, and other industries that produce precision metal products and require fast, accurate, and reliable laser metal cutting. If you have any further questions, we will be happy to answer them.