Used Elumatec Elumatec Typ Kf 78 for sale (3,837)

Condition: used, functionality: fully functional, Key Technical Specifications From official Elumatec documentation: Routing capabilities: Horizontal cutting range: With stop: 300 × 100 mm Using template: 270 × 70 mm Travel: 80 mm Vertical cutting range: With stop: 290 × 100 mm Using template: 230 × 70 mm Travel: 120 mm elumatec +1 Spindle speed: 12,000 rpm elumatec +1 Profile clamping capacity: up to 150 × 150 mm elumatec +1 Power supply: 230/400 V, 3-phase, 50 Hz Power output: 0.74 kW elumatec +1 Compressed air: 7 bar; air consumption per cycle: 12 l (no mist), 24 l (with mist) elumatec +1 Dimensions & weight: Length: 940 mm Depth: 1 150 mm Height: 1 600 mm Weight: approx. 260 kg elumatec +1 Market Listing Highlights A listing from Modern Tool BC provides real-world equipment data that aligns closely with the official specs: Electrical characteristics: 240–575 V, 60 Hz, 3-phase (typical for North American markets) Motor power: 1.0 horsepower (≈0.75 kW) Spindle speed: 12,000 RPM Routing capacities: Horizontal with stop: 300 × 100 mm Horizontal with template: 270 × 70 mm Horizontal stroke: 80 mm Vertical with stop: 290 × 100 mm Vertical with template: 230 × 70 mm Vertical stroke: 120 mm Modern Tool BC Key features: Simultaneous routing in two planes without repositioning 1:1 copy ratio via stops or templates Pgjdpfxew Syzqo Ad Sjn Two-handed operation for safety Two horizontal pneumatic clamps Includes air service unit, blank & keyhole templates, 8 mm & 10 mm collets, pulse spray mist coolant system, tools, and an operation manual Verify the accuracy of the information with the seller.

Year of construction: 1992, condition: used, functionality: fully functional, machine/vehicle number: 33 432, Two-spindle copy milling machine, Elumatec KF 78 / 60 used & fully functional For processing aluminum or steel profiles With vertical and horizontal milling motor, spray device and pneumatic clamping device Technical data (according to Elumatec): Podpfx Asy Sxr Nod Sjgn Profile height: 60 mm max Milling range, horizontal: 180 x 70 mm Milling range, vertical: 300 x 95 mm Stroke: 110 mm Drilling speed: 6000 rpm Milling speed: 12000 rpm Dimensions (H x W x D): 160 x 280 x 110 cm Weight approx. 260 kg

Condition: used, functionality: fully functional, Lot of 3 copy routers Elumatec KF78/23. 2 units are fully operational (100%). The third is 50% operational, but can easily be refurbished or used for spare parts. Various spare parts included. Horizontal processing area: With stop: 300 x 100 mm With template: 270 x 70 mm Vertical processing area: Pgodjyzfl Iepfx Ad Ssn With stop: 290 x 100 mm With template: 230 x 70 mm 12,000 rpm Clamping range: 150 x 150 mm Supply voltage: 230/400V, 3-phase Price is for the lot of 3 machines, without feed tables.

Year of construction: 1994, condition: excellent (used), functionality: fully functional, Horizontal cutting ranges: With stop: 300 × 100 mm With template: 270 × 70 mm Travel: 80 mm Vertical cutting ranges: With stop: 290 × 100 mm Pgedpfsyxnx Sjx Ad Sen With template: 230 × 70 mm Travel: 120 mm

Year of construction: 2002, condition: excellent (used), functionality: fully functional, ELUMATEC KF 178 – 3-Spindle Copying Router Technical Data Upper Routing Unit Routing area with stops or copying templates: 340 × 100 mm Stroke: 110 mm Lower Routing Unit Routing area with stops or copying templates: 240 × 85 mm Front stroke: 95 mm Rear stroke: 45 mm General Data Continuously adjustable speed from 3,000 to 12,000 rpm. Also suitable for thin-walled steel and stainless steel profiles. Clamping range for profiles: 115 × 100 mm Mains connection: 230/400 V, 3 ~, 50 Hz Motor power per spindle: 0.74 kW Compressed air connection: 7 bar Air consumption per working cycle: 12 l without spray device 24 l with spray device Dimensions (L × W × H): 980 × 1,250 × 1,610 mm Weight: 360 kg Equipment Ideal machine for economical door production. For routing lock cases, profile cylinders and rosettes in aluminum and PVC profiles. Pedpfx Adszcz Dno Ssgn Three fully independently operating copying routing units. Separate control of the horizontal and vertical routing spindles. Workpiece clamping upwards against the lock assembly surface, eliminating the need for readjustment with different profile heights. “Spindle Lock” for quick tool changes. Flexible stop system with support rollers and adjustable folding stops. Profile cylinders and rosettes.

Year of construction: 1995, condition: excellent (used), functionality: fully functional, machine/vehicle number: 20/192, We are offering this used elumatec KF 178 in very good condition, year of manufacture 1995. Model: KF 178 Machine no.: 20 192 Voltage: 230/400 V Pedpfey D I R Sjx Ad Segn Frequency: 50 Hz Current: 3.6/2.1 A Speed: 12,000 rpm Operating pressure min.: 5 bar Operating pressure max.: 8 bar If you have any questions or need more information, please feel free to send us a message or call us.

Condition: excellent (used), Shipping within the EU: 350 euros Pjdpfxel Sklgo Ad Segn

Condition: excellent (used), Copy milling machine Elumatec type KF 78/60 Pgjdpfx Adevi R Avs Son EU shipping - 350 euro

Year of construction: 1992, operating hours: 100 h, condition: used, functionality: fully functional, Description Corner crimper for pressing profiles with a height of up to 68 mm. Extremely high pressing force achieved by a large-volume bellows cylinder (maintenance-free). The machine is easy to adjust and operate. Counter bearing pneumatically positionable with mechanical locking Support arms and pressing blades included as standard Two-hand operation for safe use Options Additional support Special pressing blade Technical Data Pressing height: 68 mm Pressing force: 40 kN (4 t) Drive: Pneumatic Compressed air supply: 7 bar Air consumption per cycle: 30 l Dimensions (L × D × H): 650 × 820 × 1,270 mm Pedpfsx Rvl Rex Ad Sjgn Weight: 205 kg

Condition: used, Year of construction: 2002, Double-sided softforming edge banding machine HOMAG type Power KF 20/34/QE/30, machine no. 0-202-25-8815, year 2002 Pjdpfeyyxc Rsx Ad Sogn

Year of construction: 1980, condition: good (used), Copy milling machine, copy milling machine, hand lever milling machine, hand lever milling machine -Area of application: Processing of aluminium and steel profiles -with 1 vertical and 1 horizontal milling motor -per engine: 0.74 kW 12,000 rpm -Installation dimensions 2800/1100/H1630 mm -Transport dimensions 800/1200/H1630 mm -Weight: 270 kg Pgsdpfx Asgfcm Ajd Sjn

Condition: used, cleaned, function checked, test run with face-plate motor used manufactured by Festo type KF Psdpjvwfr Uofx Ad Sogn stand machine door rest base face-plate motor exhaust connection D 50 mm required space ca. l x w x h mm 1200 x 800 x 2000 weight ca. 200 kg total connected power 1 kW located in  97447 Gerolzhofen sale in current condition as seen - free on truck -

Condition: used, used, good condition, hardly runmanufactured by Haffnertype KF 20stand machinechain set 40 x 150workpiece restlubricant unit1 x mechanical workpiece clampingrequired space ca. l x w x h mm600 x 800 x 2000total connected power 1,7 kWlocated in  97447 Gerolzhofensale in current condition as seen- free on truck - Pgedpfx Ajvwgaysd Sjn

Condition: used, maximum load weight: 211 kg, overall weight: 850 kg, axle configuration: 1 axle, first registration: 03/2026, loading space length: 2,070 mm, loading space width: 1,080 mm, total width: 1,495 mm, total height: 1,150 mm, A57 GW26GA01495, Signatures of Eintracht Frankfurt players subsequently sealed with clear lacquer Product information "STEMA FT 8.5-20-10.1B" incl. jockey wheel and shock absorbers approved for 100 km/h with certification* * Optimal road handling due to stable chassis with safety V-drawbar * Robust rubber suspension axle with independent wheel suspension * Maintenance-free compact wheel bearings * Sturdy side panels with double corrosion protection through GALVALUME (aluminum-zinc coating) * Large and stable lashing hooks for load securing (model-dependent) * Robust cast steel angle lever locks (model-dependent) Pedpfxoyqdq Hs Ad Segn * Slip-resistant, waterproof phenolic plywood floor * All-round protected multifunction lights * Incl. lid/cover Low-loader, manufacturer: STEMA, type: FT 8.5-20-10.1 with lid/cover, gross weight: 850 kg, inertia braked, lid color: green/white, 100 km/h approval ...and much more. Subject to errors and prior sale.

Condition: ready for operation (used), Emod, type VKM64/23-90 3~ motor, motor no. 7885881, 0.65 kW, 8450/min, used, in good condition, 100% functional. Pgjdpfoi D Huzex Ad Ssn

Condition: ready for operation (used), maxon EC motor 301782, Ø 30 mm, 60 W, with Hall sensors + MR encoder, type ML, 500 pulses, 3-channel, with line driver, 24V, used, normal signs of wear, 100% functional, scope of supply as shown in the photos. Pgjdpfx Asi D I Itjd Son

Condition: good (used), Hoe, transport wagon Pgsdpfob A I Nzex Ad Ssn -Material: entirely made of 4301 stainless steel -Dimensions: 1100/1000/H780 mm -Intermediate dimension: 85 mm -Weight: 41 kg

Year of construction: 2013, condition: used, Max. saw blade diameter: 380 mm Stepless saw blade feed via two-hand operation Pgsdpfx Aozgupqod Ssn Pneumatic material clamps Minimum quantity spray device Weight: about 350 kg

Year of construction: 1999, condition: used, Used machine Year of manufacture: 1999 Large milling area despite compact design Copy milling using side guides or templates in a 1:1 ratio Pneumatic copying stylus with two stages for two different cutter diameters The patented suspension of the copying lever guarantees precise milling with minimal effort Pgsdjxqihispfx Ad Ssn Table height adjustment for extremely high profiles up to 400 mm Easy tool change via "spindle lock" Pneumatic material clamping device Metering spray device Options Copying templates milled to standard dowel hole and PZ milling pattern Copying stylus Collet Guide system Material clamping device with 2 clamping cylinders Milling tool 8 mm Availability: short-term Location: Röllbach

Condition: excellent (used), A robust German machine designed for riveting, crimping eyelets, snaps, and other fastening elements. Thanks to its stable construction and electric drive, it ensures consistent and precise operation. Technical specifications: Manufacturer: Constantin Hang Maschinenfabrik Model: 167-12 Serial number: 34,756 Power supply: 220/380 V Motor power: 0.25 kW Motor speed: 1390 rpm Pgjdpfxjzgl Hye Ad Son Electric drive with foot pedal 220 V electromagnetic brake Adjustment of working settings Stable industrial construction Made in Germany Condition: Used machine, in good visual condition. Condition as shown in the photos. Sold in the exact condition as depicted in the photographs.

Condition: good (used), Polar Mohr 78 X Paper Cutting Guillotine Machine has been serviced and is ready to use, in perfect condition. Manufactured in 2008. Technical specifications: Cutting width: 780mm Stack height: 120mm 15″ LCD display 400V power supply Weight: 1400kg Side tables Chrome table surface Table lighting and optical cutting line Pedpfszgdafjx Ad Ssgn Continuously adjustable pressure Additional rear table covers. Spare knife, cutting sticks, tapping block, and operating tools.

Year of construction: 2012, condition: used, 4-axis machining center with 8-way tool changer for aluminum or PVC profiles Max. processing length: 7,600 mm Y-axis travel: 850 mm Z-axis travel: 650 mm Swivel angle A-axis: 0° - 180° Max. speed 21,000 rpm Weight: approx. 5,000 kg New Windows PC in 2022 Minimalmengensprühung Spanner capture and automatic shifting 8 pneumatic workpiece clamps Pendulum operation through two light barrier areas Pgsdpfezf I Uwjx Ad Sen Spindle in like-new condition (15.5 kN pickup force) Elusoft dongle for programming on external PC Loading is included in the price

Year of construction: 2002, condition: used, 3-axis machining center with automatic 8-station tool changer for aluminum or PVC profiles Max. travel stroke X-axis: 6400 mm Max. Travel of Y-axis: 400 mm Max. travel range Z-axis: 380 mm Control E 500 Speed continuously adjustable up to 6,000 rpm handheld control unit minimum quantity spraying 2 angle heads and a high-speed spindle Pgjdpfx Adszf I Tte Sen 8 pneumatic material clamps Oscillating operation possible Photoelectric sensors

Condition: excellent (used), CATALOG NUMBER 7618 TECHNICAL DATA - shaft width: 500 mm - number of knives: 4 pcs - max thickness of workpiece: 230 mm top section: - anti-kickback fingers - toothed, feed, swivel, sequential infeed shaft - pressure rollers - planing shaft - pressure roller - smooth feed outfeed shaft bottom section: - 2 slip rollers in the table - motor: 5.5 kW Pgjdpfx Ajy Tufnjd Son - manual table height adjustment - 2 feed speeds: 7.5; 13 m/min - extraction port diameter: 160 mm - dimensions (L/W/H): 1100x1000x1200 mm - weight: 600 kg ADVANTAGES – made in Italy – original paint (not repainted) – used thickness planer, in very good condition Net price: 15,900 PLN Net price: 3,780 EUR (based on exchange rate 4.2 PLN/EUR) (Prices may change with significant exchange rate fluctuations)

Condition: used, CATALOG NUMBER 7585 Technical specifications: Podpfox Tptgex Ad Segn - wheel diameter: 630 mm - table dimensions: 850x810 mm - angle-adjustable table - motor: 3 kW - max cutting height: 320 mm - band-to-frame throat: 600 mm - dust extraction port diameter: 90 mm - brake - dimensions (L/W/H): 1300x830x2050 mm - weight: 420 kg Advantages: – Polish production – DTR documentation – very good condition – used saw Net price: 8,500 PLN Net price: 2,020 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)