Used Dumeta D-Hbe-12 for sale (60,269)

Condition: new, table diameter 1000 mm table load 1200 Kg swivelling range 0 - 135 Grad turning speeds 0,1 - 1,0 U/min height adjustment 1000 - 1450 mm max. torque on the faceplate 2000 Nm Dodpfxefv Ayro Ah Neuu engine output 0,75 / 0,55 kW welding current 500 Ampere - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. The D-HBE series comes as a standard version with a cable remote control and a footswitch. Welding power transmission for max.500Ampere.

Condition: new, table diameter 1500 mm table load 5000 Kg swivelling range 0 - 130 Grad turning speeds 0,05 - 0,5 U/min height adjustment 1300 - 2050 mm max. torque on the faceplate 10000 Nm engine output 1,5 / 1,5 kW welding current 1000 Ampere Duedpfx Ahefv Ay Do Nou - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. The D-HBE series comes as a standard version with a cable remote control and a footswitch.

Condition: new, table diameter 2000 mm table load 10000 Kg Dedpfsfv Ay Ijx Ah Nouu swivelling range 0 - 130 Grad turning speeds 0,02 - 0,2 U/min height adjustment 1450 - 2200 mm max. torque on the faceplate 20000 Nm engine output 1,5 / 2,0 kW welding current 1000 Ampere - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. The D-HBE series comes as a standard version with a cable remote control and a footswitch.

Condition: new, table diameter 1300 mm table load 3000 Kg swivelling range 0 - 130 Grad turning speeds 0,05 - 0,5 U/min height adjustment 1200 - 1800 mm max. torque on the faceplate 6000 Nm engine output 1,1 / 1,1 kW welding current 700 Ampere Dusdsfv Ayyepfx Ah Nsu - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. The D-HBE series comes as a standard version with a cable remote control and a footswitch. Welding power transmission for max.500Ampere.

Condition: new, table diameter 1100 mm table load 2000 Kg swivelling range 0 - 135 Grad turning speeds 0,1 - 1,0 U/min height adjustment 1100 - 1550 mm max. torque on the faceplate 4000 Nm engine output 1,1 / 0,75 kW welding current 500 Ampere Dedpfjfv Ayvsx Ah Njuu - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. The D-HBE series comes as a standard version with a cable remote control and a footswitch. Welding power transmission for max.500Ampere.

Condition: new, table diameter 800 mm table load 600 Kg swivelling range 0 - 135 Grad turning speeds 0,1 - 2,0 U/min height adjustment 850 - 1300 mm max. torque on the faceplate 900 Nm engine output 0,37 / 0,37 kW welding current 500 Ampere - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. The D-HBE series comes as a standard version with a cable remote control and a footswitch. Dusdpfx Ahjfv Ayne Nju Welding power transmission for max.500Ampere.

Condition: new, thread dia. M3 - M12 mm 400 U/min. 28 Nm air pressure 6 - 8 bar working area 150 - 1900 mm weight of the machine ca. 12 kg Djdod Iinuepfx Ah Neuu Pneumatic Tapping Machines for M3 - M12 thread, angle adjustable. 6 pcs. Keyless chuck with clutch. optional: Working table with T-slots: 750x600x650mm 990x700x800mm or. Magnetic base. Available up to max. M16, M22 and M33.

Condition: new, table diameter 1200 mm table load 1,2 t swivelling range 0 - 120 Grad turning speeds 0,06-0,6 U/min max. torque on the faceplate 2400 Nm table pass 200 mm welding current 500 Ampere total power requirement 0,75 + 1,1 kW weight of the machine ca. 1,0 t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. Dujdpfjfv Aw Nex Ah Nou • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical.

Condition: new, thread dia. 12 mm 375 U/min. Dusdpfofg U Spsx Ah Nsu working area 180 - 1000 mm engine output 0,7 kW

Condition: new, thread dia. 12 mm 375 U/min. working area 180 - 2000 mm engine output 0,7 kW weight 28 kg Duodpfed Iinnsx Ah Neu

Condition: ready for operation (used), Siemens 6FC5203-0AB11-0AA2 Flat panel OP031 Version C , serial no. according to photo, used, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery according to photos Dujdpfx Asi Edy Noh Nsu

Year of construction: 2018, condition: like new (used), Dumeta welding rotary table hydraulic height adjustable Dusdohua Dqjpfx Ah Nsu 500 Kg load capacity welding turntable height adjustable with through hole 100 - 200mm plate diameter 700mm Height horizontal min. 0,6m, max. 1,2m height tilted min. 0,40m, max. 1,0m speed from 0,11 - 1,25 rpm Weight 750 Kg Tilt up to 135 hand and foot remote control with speed indicator very robust

Condition: excellent (used), 3000 Kg load capacity welding rotary table, very robust speed infinitely variable from 0,05 to 0,6 rpm Clamping plate square 2200mm Duedpfsncfwmex Ah Nju bore 190mm, T-slot 70mm Height tilted up to center 1600mm inclination up to 135 length 2,0 m x width 1,4 m hand remote control with digital display and foot remote control

Condition: excellent (used), Year of construction: 2019, HD-SFVO 412-S HBE 320/523 G- YEAR 2019. Marking-drilling-milling-shearing & sawing line HD-SFVO 412-S DRILLING CAPACITY. Flat bars: 50x10 to 400x30 Angles: 50x50x5 to 250x250x20 IPN-IPE: 80 to 400 HEA-HEB: 100 to 400 UPN-UPE: 80 to 400 Square and rectangular tubes: 50x50 to 300x300x20 HBE 320/523 G SAWING MACHINE. Effective cross-section (mm): 90°: 400x300 Bevel cut, left pivot (W x H, mm): 75°: 400x300 60°: 400x300 45°: 330x300 30°: 200x300 Bevel cut, right pivot (W x H, mm): 75°: 400x300 60°: 400x300 45°: 310x300 Power supply: • Three-phase 400V ± 15 V + ground, 50Hz • Installed power: 40 kVA Compressed air: • Minimum pressure: 6 bar • Maximum flow rate: 3 Nm³/h Operating temperatures: • From 10°C to 40°C Milling unit specially designed for machining small square or rectangular tubes (slotted holes, shaped cuts, etc.). Djdpoy R Tk Rjfx Ah Nsuu With the engraving equipment: ability to engrave letters or numbers for part identification. Allows, among other things, marking of tubes with sufficient depth to ensure legibility after painting or galvanizing Secure holding of the bar during milling: the bar is clamped in the movable vice system to ensure proper machining while minimizing vibrations. Improved positional tolerance of one hole relative to another within a group of holes (within a maximum length of 150 mm) Additional features Cycle for centre punching, countersinking, tapping, deburring, and chip breaking Automatic measurement of tool length (HSS) Side and centre tool cooling 230-ton shear Feature Mobile hydraulic shear Straight cut Average cutting time: approximately 2 to 2.5 seconds Capacities: HEB 140 IPE 300 IPN 280 Angle bars 150x150x18 L 200x100x14 UPE 300 UPN/UPAF 300 Flat bars 300x20

Condition: good (used), Year of construction: 2013, machine/vehicle number: 011-113081603, Offer 23370 Technical data: - max. load capacity 50 kg - face plate diameter 340 mm - Spindle shaft diameter 25 mm - Face plate can be swiveled by handwheel 0 - 90 ° - Rotation electr. infinitely variable 0.5 - 3 rpm - Right + left rotation - E. - foot switch - Earth cable - Welding current transmission approx. 350 A - Drive 230 V Dodsq Ev R Sspfx Ah Nsuu - Table height in horizontal position 760 mm - Space requirement approx. W 650 x H 760 x D 600 mm - Weight approx. 150 kg

Condition: new, weight max. 40 t workpiece diameter 600 - 4500 mm drum diameter 400 x 160 mm Dodefv A Easpfx Ah Nouu feed 100 - 1000 mm/min total power requirement 3 kW

Condition: new, weight max. 1000 kg workpiece diameter 20-800 mm connected load frequency 230 V speed 100 - 1000 mm/min total power requirement 0,1 kW weight of the machine ca. 65 kg dimensions of the machine ca. 520x470x390 mm Dujdpsfv A Afofx Ah Neu

Condition: new, weight max. 5 t workpiece diameter 250 - 2500 mm Djdsfv A A Uopfx Ah Njuu drum diameter 250 x 100 mm feed 100 - 1000 mm/min total power requirement 0,75 kW

Condition: new, table diameter 690 mm table load 0,5/0,25 t swivelling range 0 - 90 motorisch Grad turning speeds 0,2 - 2,5 U/min spindle bore 100 mm Torque 375 Nm welding current 500 Ampere connected load frequency 230 Volt weight 290 kg Dimensions (LxWxH) 800 x 750 x 750 mm Welding turntable with - Footswitch - tilt motor - Speed continuously adjustable Dujdpfxefv Ayko Ah Nou - 500 amps welding current transmission

Condition: new, table diameter 490 mm table load 300/150 kg swivelling range 0-90 manuell Grad table load horiz. 300 Kg table load vert. 150 Kg boring diameter 65 mm table turning speeds 0,4 - 4,0 U/min voltage 230 V Duedpfsgvkktsx Ah Nju total power requirement 0,2 kW weight of the machine ca. 0,1 t dimensions of the machine ca. 0,5 x 0,52 x 0,5 m The D-BYT N welding manipulator has a hollow shaft, also known as Spindle bore in the rotary table, which makes inert gas welding possible. the Due to the compact design, turn-tilt tables can be installed in any integrate existing production facilities. Inert gas welding (forming gas). thereby simplified. Features: - Double foot pedal (start-stop/left-right) included - Infinitely adjustable rotation speed of the table - Suitable for any welding process, even high frequency - Very high stability - compact model - Through hole in the turntable plate - CE marking - Very good value for money

Condition: new, table diameter 900 mm table load 1 t swivelling range 0-135 Grad excentricity 200 mm table turning speeds 0,12 - 1,2 U/min Torque 2000 N/m total power requirement 0,75 kW dimensions of the machine ca. 1,5 x 1,020 x 0,9 m The D-HB tilt and turn tables are very stable due to their heavy construction Dujdpfx Aegvkikoh Nju and therefore particularly suitable for heavy and precise Positioning activities and circular welding work. Features: - Easy installation - Increase in production is made possible - Improvement of the welding quality through optimal positioning and Cruise control - Reduction of crane hours and handling time, during which the Improved occupational safety. - Self-locking gear, therefore no leading and trailing behind with eccentric burden - Electronic components from Schneider, Siemens and Delta - Frequency-controlled stepless speed of the turntable - High stability due to the robust construction - CE certificate - The D-HB series includes a remote control with foot pedal for left-right / Start-stop.

Condition: new, weight max. 5,0 t workpiece diameter 250 - 2500 mm total power requirement 0,75 kW load capacity drive unit max. 2500 kg load capacity rotating unit max. 2500 kg weight of the machine ca. 0,9 t The self-adjusting D-HGZ roller blocks adapt to the different Diameters of your workpieces yourself. This roller block is for special designed for heavy-duty activities. Furthermore, this roller block is for Suitable for thin-walled workpieces, as the four wheels per unit are an improved Djdpfegvkpfsx Ah Neuu Supply pressure distribution. || Features: | - Electronic components of Top quality | - Infinitely adjustable speed of the drive unit | - Wheels fitted with solid rubber tires enclosed in one Steel construction | - Heavy construction enables very high stability. | - Favorable price-performance ratio enables quick recovery Your investment. | - The D-HGZ series is supplied as a standard version and includes a remote control with digital reading. || Accessories: | - double Foot pedal (start-stop / left-right) | - remote control

Condition: new, weight max. 5000 kg workpiece diameter 250 - 2500 mm total power requirement 0,75 kW table turning speeds 100 - 1000 mm/min diameter of running wheel 250 x 140 mm weight of the machine ca. 800 kg range L-W-H 2200 x 2500 x 800 mm Dusdpfjn N D Iwsx Ah Neu - For machining cylindrical workpieces - Flat frame - Castors with polyurethane coating - Clear controls - Infinitely variable speed - The control electronics are of a robust and closed housing protected - With foot switch for start/stop - Drive with DC electric motors and gears

Condition: new, weight max. 5,0 t workpiece diameter 100 - 2500 mm total power requirement 2 x 0,37 kW load capacity drive unit max. 2500 kg load capacity rotating unit max. 2500 kg table turning speeds 100 - 1000 mm/min diameter of running wheel 250 x 140 mm weight of the machine ca. 0,9 t Dujdpfx Ajgvwgcjh Nsu Incl. double foot pedal (start-stop / left-right) Incl. remote control (on the cable)

Condition: new, table diameter 560 mm table load 0,3 t swivelling range 0-90 Grad table turning speeds 0,25 - 4 U/min Torque max. 360 N/m centre of gravity max. 150 mm total power requirement 0,4 kW The D-HB tilt and turn tables are very stable due to their heavy construction and therefore particularly suitable for heavy and precise Positioning activities and circular welding work. Characteristics: - Easy installation - Increase in production is made possible - Improvement of the welding quality through optimal positioning and Cruise control - Reduction of crane hours and handling time, during which the Improved occupational safety. - Self-locking gear, therefore no leading or trailing behind with eccentric Dusdpegvkgtjfx Ah Neu load - Electronic components from Schneider, Siemens and Delta - Frequency-controlled stepless speed of the turntable - High stability due to the robust construction - CE certificate - The D-HB series includes a remote control with foot pedal for left-right / Start-stop.