Used Dreher S34/52 Gfs Spez for sale (4,205)

Condition: good (used), 1 unit, used. Cutting mill including dust extraction system. Manufacturer: DREHER Year of manufacture: 1998 Type: S34/52 GFS Special Pgjdpfx Ans Afbvxogeu Infeed size: 375 mm x 370 mm Rotor diameter: 340 mm Motor power: 22 kW

Condition: used, machine/vehicle number: 11648, Roller feeder on the hopper Rotor blade rows: 3 Pgjdpfx Ajyr Tmaengou Stator blade rows: 2 Rotor width: 520 mm Rotor diameter: 340 mm Inlet dimensions: 500 x 350 mm

Condition: used, machine/vehicle number: 12768, Rotor diameter: 340 mm Psdpsyr Tq Ejfx Angogu Rotor width: 520 mm 4-knife rotor 2 rows of stator knives Infeed opening approx. 340 x 520 mm Drive motor: 18.5 kW

Condition: excellent (used), functionality: fully functional, Manufacturer: Dreher, Germany Model: 26/26 GFS Dimensions of the grinding chamber: 260 x 260 mm Power: 5.5 kW New blades 3 rotor blades Podpfxeztfl No Angogu 2 stator blades Additional sieve

Condition: used, Year of construction: 2019, controller manufacturer: Sonstige, controller model: , _____ Description: Year of manuf. : 2019 Control : Sonstige Double unwinding reel with drive Design:Short design Band width min./max.:230 – 520 mm Coil weight max.:2 × 30 kN Number of reels:1 Coil outer diameter min./max.:1,500 – 2,000 mm Spreading range min./ max.:460 – 525 mm Coil delivery:Industrial truck Reel loading:From the front (operating side) Coil unwinding:From the underside of the coil Material:Aluminium, soft Strip thickness min./max.:0.8 – 1.2 mm Tensile strength (Rm) min./max. :100 – 250 N/mm² Strip cross-section max.:600 N/mm² Straightening capacity:See straightening diagram Strip speed min./max.:2 – 10 m/min Strip infeed height above floor: 2,100 mm Degree of automation:Fixed / ± XXX mm Operating mode:Jog mode on sight system parameters System stroke rate:45 rpm Working direction:Right–left, front loading with forklift truck Flatness of installation site:± 15 mm Connection voltage:400 V, 50 Hz Ambient temperature:20 – 40 °C Compressed air connection:5 bar Pedpfsz Enbbex Angjgu reel :Double reel with drive :Spreading :- Manual toggle lever system with hand crank :Coil limitation :22 November 2019 :22 November 2019 :- Single arms, manually adjustable according to scales, fixed at the front via :quick-release lever and at the rear via clamping screws :Brake/drive :- 2 frequency-controlled asynchronous motors :- 2 dual-circuit safety air pressure disc brakes :Swivelling :- Manual with 180° locking via pedal :Pneumatic pressure rollers with rubberised rollers at the top :mounted on brackets. :Hydraulic spreading :- Hydraulic spreading instead of manual spreading with hand crank :- Hydraulic unit with valves and piping mounted on the reel head :Belt pull-off and belt feed Belt loop :- Control via ultrasonic sensor/laser on the unwinding side

Condition: used, machine/vehicle number: K12936, Rotor diameter: 340mm Rotor width: 520mm Rotor blades: 5 rows Stator blades: 2 rows Inlet cross-section: approx. 340 x 520mm Psdpfxez N Iyys Angegu Drive motor: 22kW

Condition: used, machine/vehicle number: K12895, Rotor diameter: 260mm Rotor width: 410mm Rotor blades: 5 rows Stator blades: 2 rows Pgjdpfsz N Iytjx Angsu Infeed cross-section: approx. 2 pieces of 140 x 40mm Drive motor: 7.5kW Vacuum system for drawing in film edge strips

Condition: used, Year of construction: 2011, Decoiler Coil weight: 4,5 ton Material width max.: 520 mm Coil exterior diameter: 1600 mm Expansion range: 460 - 530 mm Leveller / Straightener Material width : 20 - 400 mm Pjdsuqfa Ispfx Angjgu Number of levelling rolls: 7 pcs. Diameter of the levelling rolls: 60 mm Number of pull out rolls: 4 pcs. Diameter of the pull out rolls: 60 mm Material thickness: 0,4 - 3,5 mm Feeding speed: 2 - 10 m / min Roll feeder Material width max.: 310 mm Material thickness: 3,0 mm Material thickness at max. width: 2,8 mm Material thickness at max. cross section: 850 sq mm Number of feeding rolls: 2 pcs. Diameter of feeder rolls : 80 mm Feeding speed: 104 m / min Required power: 1,5 kW Standard configuration Coil loading unitStroke 500 mm Load capacity 5000 kg Material width max. 500 mm

Condition: used, total length: 1,400 mm, total height: 2,050 mm, total width: 1,400 mm, Empty weight: 500 kg Price: On request Granulator Dreher S26/26 VS Pgodpfx Anewh Naisgsu Machine No. K 8329 Built in 1982 Engine 5.5kW Speed 1440 Rpm. 2 fixed blades 3 rotating blades (need to be replaced) Funnel opening: 360x240 mm Interchangeable strainer Sieve holes 6mm - Main motor power [kW]: 5.5 - Rotation speed [rpm]: 1440 - Opening width [mm]: 360 - Opening length [mm]: 240 - Sieve perforation [mm]: 6 - Number of rotating knives [pcs.]: 3 - Number of fixed knives [pcs.]: 2 - Transport dimensions: 1400mm x 1400mm x 2050mm (l x w x h) - Transport weight [kg]: 500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, machine/vehicle number: 12464, Rotor diameter: 420 mm Rotor width: 650 mm 5-knife rotor 2 rows of stator knives Feed opening approximately 420 x 650 mm Podpfxoyr Tn Re Angsgu Drive motor: 37 kW

Condition: excellent (used), Professional granulator from the German brand Dreher – model S 26/26 GFS-SPEZIAL. This unit is designed for shredding plastics from injection molding or extrusion processes. It features a robust construction, a proven VEM 7.5 kW motor, and a three-phase 400 V power supply. The machine has a large feed hopper, convenient service access, and a control cabinet with an emergency stop button. The installed low-speed three-phase motor provides high shredding power while maintaining stable operation. • Motor power: 7.5 kW • Power supply: 400 V 50 Hz • Speed: 1500 rpm • Performance suitable for medium and large injection molding machines Pgodpfez Sk Dujx Angeu • German quality • Robust frame and blade construction In very good condition, mechanically inspected, and ready for operation.

Condition: ready for operation (used), Year of construction: 2009, A wood dust extraction and filtration system Krämer for saw lines is available. 1) Wood dust extraction unit Krämer VKA-P 100/650/55, air volume flow: 27000m³/h, pressure increase: 3800Pa, motor power: 55kW, V-belt length: 3550mm. 2) Filtration unit Krämer GFS Shake 160/25/250, filtration capacity: 30000m³/h, filter material: polyester needle felt, material discharge: TFS40/10/1.1. 3) Fan Krämer VFM-R 45/250/3, air volume flow: 3000m³/h, pressure increase: 2500Pa, motor power: 3kW. 4) Fan Krämer VFM-P 42/200/4, air volume flow: 2500m³/h, pressure increase: 3000Pa, motor power: 4kW. 5) Separator tank/filter hopper Krämer. 6/7) 2x axial fans. Including pipes and peripheral equipment. The motor flange on the discharge motor is defective. Documentation available. An on-site inspection is possible. Pjdsxl Elgspfx Angogu

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, Line is consisting of: Dreher 2 vessel brew system Type: KBA500 Year: 2006 Kettle: 550 litres Heating: 42 kW Controls KBA basic 3x Dreher fermenting tanks Type: GW500 Year: 2006 Content: 520 litres With Dreher ZKV120 cooling 3x Dreher / Brovarni dispensing tanks Type: 500 L CCT Year: 2017 Content: 500 litres 1x Dreher brite tank Content: 1000 litre Pedpsz Hlcljfx Angegu 6x Dreher Kombi-tank Type: KT500 Year: 2006 Content: 500 litres 5x FIB beertanks Type: 70200503 Year: 2022 Content: 540 litres Auxiliary equipment a.o. - Gail 103 grain mill - Enotecnica Pillan srl F30 20x20 filter - Serrco SW-150 cooling water tank - bottle washing station - bottle filling machine - corking device - 45x 20 litre kegs - working table - double sink

Condition: excellent (used), Year of construction: 1976, Sheet width - max.: 200 mm Straightening roller diameter: 40 mm Number of straightening rollers: 5 Driven infeed and outfeed rollers Sheet thickness - min.: 0.4 mm Sheet thickness - max.: 2.0 mm Weight: 170 kg Pgodpfxe Aa Dnyo Angeu Infinitely variable feed speed Right and left rotation Operating mode selector switch for manual and automatic operation Belt loop control Good working condition A decoiler can also be purchased.

Condition: used, Year of construction: 1980, machine/vehicle number: A-07/471A, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Material data Sheet width: max. 130 mm Sheet thickness: min. 0.4 mm Sheet thickness: max. 3.5 mm Straightening unit Straightening roller diameter: 40 mm Number of straightening rollers: 5 Traction rollers: 2 + 2 Machine data Pjds Aa N Acopfx Angsgu Weight: 0.4 t Dimensions Space requirement: approx. 0.6 × 0.65 × 1.15 m EQUIPMENT Strip straightening machine Integrated, continuously adjustable VARI drive Right and left rotation Operating mode selector switch for manual and automatic operation Infeed roller basket Position display of the straightening rollers via analog display Adjustment of the straightening roller positions via handwheels Automatic strip loop control Very good condition

Condition: used, Unwinding reel for coil material DREHER - DIMECO, Type 2370 BF Model 653, Year of manufacture 1979 Coil weight, max. 2000 kg Coil width, max. 320 mm Coil width with guide arms, max. 320 mm Coil width without guide arms, max. 480 mm Coil inner diameter 340-540 mm Reel shaft, support shaft, Ø 90 mm - Central spreading adjustment of the reel crown via hand crank (square shaft 24 mm) - Mechanical brake on the reel shaft with manual brake force adjustment via hand crank Pedpfx Aoz R D Snsngjgu - 6 pcs. coil guide arms 500 mm, with toggle clamp - Conversion to motor drive possible, motor mount available, sprocket for roller chain on the reel shaft available Footprint: Width: 170 cm x Depth: 138 cm x Height: 160 cm Space required for transport: Width: 78 cm x Depth: 138 cm x Height: 120 cm Weight 430 kg Good condition

Year of construction: 1993, condition: used, Two identical Dreher centrifugal drum machines are offered. Number of drums: 4, total volume: 20l, drive power: 1.5kW, direction of rotation: clockwise/counterclockwise, speed control: continuously variable. Machine dimensions: approx. 1200mm/1000mm/1600mm, weight: 280kg. An on-site inspection is possible. Pgsdpjzv T I Djfx Angeu

Condition: used, Year of construction: 1995, material width 300 mm coil weight 1,25 t material thickness 0,4 - 3,5 mm coil internal diameter 320 - 420 mm coil external diameter 1300 mm material cross-cut 750 mm² no. of straightening rolls 11 straightening roll diameter 60 mm number of draw-in rolls 4 roll diameter 60 mm speed 5 - 30 m/min power requirement 5,0 kW Weight 1,4 t Dimensions (WxDxH) 3,3 x 1,85 x 1,7 m Pgjdpozrpu Sjfx Angsu Straightening machine (Type 1675-B11-FQ) with infinitely variable drive, driven straightening rolls, manual individual adjustment of the roller cassette, cntralized adjustment of the material width, outlet rolls Decoiler, single (Type 2350 B-FPS) not driven, with pneumatic lag break, hydraulic centralized expansion, pneumatic snubber roll coil loop control via sensor

Condition: used, machine/vehicle number: G11762, Rotor diameter: 200mm Rotor width: 100mm Rotor blades: 32 rows Stator blades: 1 row Psdpfx Anoz N Ix Njgsgu Inlet cross-section: approx. 90 x 10mm Drive motor: 4.0 kW Mechanical feed device for extruder strands

Condition: used, machine/vehicle number: K11739, Rotor diameter: 150 mm Rotor width: 200 mm Rotor blades: 3 rows Pedez N Iyaepfx Angegu Stator blades: 2 rows Inlet cross-section: approx. 300 x 200 mm Drive motor: 2.2 kW

Condition: used, machine/vehicle number: K12805, Rotor diameter: 260 mm Rotor width: 410 mm Pedpfxsz N Iymo Angegu Rotor blades: 5 rows Stator blades: 2 rows Infeed cross-section: approx. 2 pieces, 10 x 120 mm Drive motor: 11 kW Mechanical infeed device for film edge strips

Condition: used, machine/vehicle number: K12804, Rotor diameter: 260 mm Rotor width: 410 mm Rotor blades: 3 rows Pgsdpsz N Iygjfx Angju Stator blades: 2 rows Inlet cross-section: approx. 260 x 410 mm Drive motor: 11 kW Wear-resistant design of the grinding unit.

Condition: used, functionality: fully functional, Equipment: compressor, MB Bäuerle Setmatic Fold CAS 52 folding machine with adhesive unit for self-mailers. Fully functional and from current production. Includes adhesive unit for self-mailers and a compressor in new condition. Further technical details will be added. Pgsdpfe Adthwsx Angeu

Condition: used, Year of construction: 1987, Uncoiler manufactured by DREHER, type 2380 F-FPS. Press force approximately --- tons. Year of manufacture 1994. Summary provided – a full technical translation will follow if required for this lot. Pgsdpfx Anszynmvogeu

Condition: used, - Documentation available: No - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Pgjdpfx Aswh Nacengju Yorick Diebels