Used Cross Support for sale (17,039)

Condition: good (used), Cross support, cross support, cross table, cross-sliding table -Manufacturer: Kunzmann, top head from milling machine type UFV 600 -Dimensions: 530/420/H730 mm Blodpfog Dg Rpox Acnol -Weight: 80 kg

Condition: used, Upper support, cross support, cross table, cross slide table -Upper support comes from a Waldrich Coburg portal milling machine type: 12 D 3232-550 HL -Table surface: mm -Travel: x 350 mm/y 220 mm -Dimensions: 1380/1000/H800 mm -Weight: 800 kg Bjdpfoct Aa Rox Acnjll

Year of construction: 2015, condition: excellent (used), functionality: fully functional, Technical specifications for the bale opening line for RDF, MSW, paper, and cardboard: Manufacturer: Cross Wrap Oy Ltd., Siilinjärvi, Finland Type: BO 4000 Year of construction: 2015 Number of bales opened: 674 Operating time: only 3 days, exclusively during the initial commissioning of the entire system upon new installation Opening time: approximately 45 seconds per bale Bale dimensions (W x H x L): 1100 x 1100 x 1400 – 1900 mm Max. bale weight: 2,000 kg System conveying height: 1,400 mm Max. system conveying width: 1,200 mm Material to be opened: RDF/MSW System availability: 98% Noise level of the bale opening line: 85 dB(A) Total connected load: 37 kW Rated current: 125 A Control panel: SIEMENS SIMATIC HMI Touch Bljdpezp H R Ejfx Acnol Controller: SIEMENS S7 ET200S Installation dimensions: 8,463 x 2,890 x 3,960 mm (L x W x H) Scope of supply: Infeed conveyor: 3,500 x 1,200 x 1,400 mm Feed conveyor to the opener: 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in the hydraulic oil tank Control cabinet heating Oil cooler for hydraulic unit Explanation for the short operating time: The entire Cross Wrap bale opening line, type BO 4000, was installed in 2015 at a municipal waste incineration plant. The reason for installing the system was to ensure that municipal waste could continue to be accepted, compressed, wrapped, and stored even during an operational disruption or maintenance of the incineration plant until the disruption was resolved. Subsequently, all the bales were to be opened again, and the waste fed into the normal incineration process. This worst-case scenario never occurred. The system was installed, commissioned, and then never used in normal operation. Only during the commissioning and initial operation of the entire system in 2015 were 674 bales opened over three days. The system is in very good condition and is immediately ready for operation. Due to restructuring measures in the incineration plant, the installation space of the bale opener was needed. This means that the complete line is now available for sale. Brief description of the bale opening process: The compressed bales are placed on the infeed conveyor from the side or from the rear using a forklift. To open the bales, they must be positioned horizontally to the conveyor with the wire or twine binding; otherwise, the bales must be rotated by 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or the twine binding. The rotating knife cuts the bale lengthwise. After that, the gripper returns to its starting position. The opened bale is now conveyed via the conveyor to the discharge chute and then falls onto the subsequent conveyor system. Remarks: New price of the complete system: €296,000. The documentation (operating manual, CE declaration, electrical/hydraulic circuit diagram) is complete. The system has been dismantled into transportable units, stored, and is available for inspection and loading in the short term. We assume no liability for the technical data or any potential errors.

Year of construction: 2022, condition: used, functionality: fully functional, Single-Use Support Ultra-Freezer RoSS.FRDG Temperature range: +10° to -80°C Capacity: up to 300L Shelf system for 20L Meissner containers included Highest storage density for frozen biopharmaceuticals Easy installation and loading with frozen active ingredients Net weight: 600 kg Bjdpfx Acozhuuvonell Currently, up to 5 units are available for sale. The units are currently out of service and stored. The new price per unit was >40,000 EUR.

Condition: like new (used), Range (depending on lighting conditions): up to 15 m Bedpfx Aced Ecncsnell Range with laser receiver: 30 m and more Leveling accuracy at 5 m: +/- 1 mm Self-leveling range: 4° +- 0.5° Accuracy of the horizontal line at 5 m: +- 1.5 mm Accuracy of the vertical line at 3 m: +- 0.75 mm Number of laser lines: 2 Weight: 485 g

Condition: excellent (used), Year of construction: 1997, Rip and cross saw REMA DMLK 30 Producer of REMA Machine model / type DMLK 30 Year of production 1997 Machine category Longitudinal and transverse saw Location Gorzów Wlkp. Conditions of delivery PERSONAL COLLECTION Cost of delivery Customer cover Bledpfx Asfv Hphocnel Startup type to be agreed Description Comments - after the technical review - very good condition - year of production 1997 TECHNICAL PARAMETERS: main engine 3.9 kW trolley length 1370 mm blade diameter 300 mm angle adjustment 0 - 45 " height adjustment cutting height max. 90 mm cutting width on the right side 885 mm ruler length 1350 mm ratchet extended receiving table two kinds of blade rotation speed 3700 and 5000 RPM The protractor visible in the photos is an additional option for PLN 400 net dimensions: length / width / height 135 x 85 x 135 cm weight ~ 320 kg

Year of construction: 2023, condition: new, functionality: fully functional, This machine, type KM13, cuts electrical cables from 20 to 120 mm in diameter. The different diameters are easily adjusted by turning the hand wheel up and down. The machine has a speed of 25 mtr/min. The dimensions are: length 600 mm, width 600 mm and height 1600 mm. The weight of this machine is about 200 kg. This machine is powered by a 380V-50HZ, 3KW electric motor with a gearbox cabinet. The cable is cut from 2 sides so the copper core falls out easily. Spare parts such as blades, drive, bearings etc can also be supplied. If required we can also perform maintenance on these machines A machine that is ready to use and easy to operate. If you want to try it, please bring cable. Bljdpoq E Ti Hofx Acnjl

Condition: good (used), Code: 0323 Brand: SML - ITALY Model: SILVER P 35/EL - CE Standard Electronic double mitre saw for cutting wood, frames, pvc, aluminium, plastics and various materials - CE Standard Technical data: Oleo-pneumatic head lowering Max cutting length mm 5200 Min cutting length mm 50 Blodpfx Acstu Hy Eonol Cutting height mm 100 Max cutting width mm 170 Blade diameter mm 350 F30 Motor Hp 3 each - Rpm 3000 Electronic head positioning programmer Bimanual blade lowering control Pneumatic pressures for workpiece clamping N° 2 suction ports diameter mm 60 Working pressure 7 bar Overall dimensions mm 6300 x 1000 x 1600 h Weight kg 1100

Condition: good (used), Code: 0246 Brand: OMGA Model: TR 2B - NC - CE Standard Automatic double mitre saw with numerically controlled positioner for cutting frames, wood profiles, furniture, wooden window frames, doors, plastic materials, and various - CE standard Technical data: Numerically controlled positioner: allows cutting lists to be stored and the moving head to be positioned automatically Cutting length 3500 mm Blade diameter 350 F 30 mm Motors each 2,2 Kw Rpm 3000 Cutting width 170 mm Blsdexztydjpfx Acnjl Cutting height at 90° 102 mm N° 2 vertical pneumatic pressers Suction mouth diameter 80 mm Compressed air 6-7 bar Overall dimensions mm 4400 x 1000 x 1500 h Weight kg 600

Condition: good (used), Code: 0370 Brand: HAFFNER - GERMANY Model: DGS 187 - CE Standard Double mitre saw with tilting blades for cutting wood, aluminum, pvc and various materials - CE Standard Technical data: Blades diameter mm 500 F 30 Blsdpfsuiwqhex Acnsl N° 2 motors each Kw 2,2 - Rpm 2800 Cutting length max mm 3400 Cutting length min mm 230 Blades inclination 45° - 90° Electronic positioning cutting length of left cutting unit Hydropneumatic saw feed Pneumatic workpiece clamping Control panel double buttons Electronic head positioning programmer N° 2 suction ports diameter mm 120 Compressed air 6 bar Overall dimensions mm 4600 x 1300 x 1650 h Weight kg 550

Condition: used, Year of construction: 2012, operating hours: 926 h, total height: 1,800 mm, total length: 11,250 mm, total width: 900 mm, Colour: Grey Weight: 1.500 kg Bsdpfoyna Ezsx Acnsll - Year: 2012 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 546324 - Operating hours: 926 - Main motor power [kW]: 7.5 - Max. saw length [mm]: 7209 - Max. saw width [mm]: 300 - Max. saw blade diameter [mm]: 500 - Arbor saw blade diameter [mm]: 85 - Input table length [mm]: 7850 - Output table length [mm]: 2400 - Options: Automatic pusher system - Voltage [V]: 400 - Current consumption [A]: 22 - Fuse [A]: 25 - Power [kW]: 11.0 - Transport dimensions: 11250mm x 900mm x 1800mm (l x w x h) - Transport weight [kg]: 1500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2002, total height: 1,870 mm, total length: 2,100 mm, total width: 2,720 mm, Colour: Grey Weight: 1.600 kg - Year: 2002 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 595001 3 16 - Main motor power [kW]: 6.5 Blsdoyf H H Hspfx Acnel - Voltage [V]: 400 - Current consumption [A]: 15 - Fuse [A]: 20 - Transport dimensions: 2100mm x 2720mm x 1870mm (l x w x h) - Transport weight [kg]: 1600kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2001, total height: 1,700 mm, total length: 1,500 mm, total width: 1,200 mm, - Year: 2001 - Documentation available: No Bedpjxdl E Rsfx Acnsll - CE marking present: Yes - CE certificate present: No - Serial number: 263989 - Max. saw width [mm]: 380 - Max. saw blade diameter [mm]: 550 - Arbor saw blade diameter [mm]: 30 - Voltage [V]: 400 - Current consumption [A]: 14.5 - Power [kW]: 5.7 - Transport dimensions: 1500mm x 1200mm x 1700mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2005, total height: 1,200 mm, total length: 8,120 mm, total width: 850 mm, Colour: Grey Weight: 1.240 kg - Year: 2005 - Documentation available: No - CE certificate present: No - Serial number: 535 - Main motor power [kW]: 6.0 - Min. saw blade diameter[mm]: 500 - Max. saw blade diameter [mm]: 550 - Options: Automatic pusher system - Voltage [V]: 400 - Power [kW]: 6.0 - Transport dimensions: 8120mm x 850mm x 1200mm (l x w x h) - Transport weight [kg]: 1240kg - Transport packages [pcs.]: 4 Financial information Bledpfox A S Upex Acnsl VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2013, Colour: Grey Weight: 2.000 kg - Details: - └ Description: Machine is currently not working, possible problem with software Blsdpfsyvf Epex Acnol - Year: 2013 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 4919 - Min. saw blade diameter[mm]: 440 - Max. saw blade diameter [mm]: 450 - Input table length [mm]: 4700 - Output table length [mm]: 2000 - Options: Automatic pusher system - Feed speed: Automatic - Voltage [V]: 400 - Current consumption [A]: 13 - Fuse [A]: 20 - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, 3700mm long, 960mm high, and adjustable Blsdpfev Dauqjx Acnjl Storage location: Nattheim

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2025701, total width: 2,600 mm, total length: 9,500 mm, total height: 1,900 mm, cutting length (max.): 530 mm, type of input current: three-phase, compressed air connection: 8 bar, power of the servo motor: 4,000 W, power: 4 kW (5.44 HP), overall weight: 8,000 kg, inner diameter: 76 mm, feed rate X-axis: 160 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 35 m/min, feed length X-axis: 530 mm, feed length Y-axis: 130 mm, feed length Z-axis: 800 mm, working width: 1,050 mm, input voltage: 380 V, installation height: 2,500 mm, GUTENBERG MASTER BAG 300X (2026) – PPWR-READY High-Speed Square-Bottom Paper Bag Machine High-speed, fully automatic roll-fed machine for producing square-bottom paper bags without handles. The MASTER BAG 300X is designed for industrial paper-bag manufacturers supplying food, bakery, retail, agricultural and European packaging markets. The PPWR-READY EDITION combines efficient bag production with controlled production recipes, approved-material management, batch traceability, waste monitoring and quality documentation. Main features Production speed: up to 180 bags/min Fully automatic roll-fed production Fully servo-driven control system Automatic paper feeding and tension control Precision tube forming and cutting Controlled side-seam and bottom gluing Automatic bottom folding and forming Automatic stacking and counting Multilingual HMI touchscreen Production of printed and unprinted bags Optional inline flexographic printing unit Suitable for approved kraft and coated-paper structures CE conformity for machinery safety PPWR-READY production package The machine can be configured to support the controlled production and documentation of paper bags designed for conformity with Regulation (EU) 2025/40 on Packaging and Packaging Waste—PPWR. Available functions include: Registration of paper supplier, grade and batch Recording of coatings, inks and adhesives Approved-material lists for each bag specification Password-protected production recipes Prevention of unauthorised material substitutions Customer, product and SKU identification Raw-material-to-finished-bag lot traceability Operator identification and production timestamps Paper, adhesive, waste and reject monitoring Recording of dimensional and bonding inspections Production batch and traceability reports Support for technical documentation requested by EU customers Barcode or QR-code material identification option Camera inspection and automatic reject options Suitable applications Flour, sugar, rice, pasta and grains Coffee, tea, spices, lentils and nuts Dried fruit and bakery products Bread, pastries and takeaway food Grocery and retail paper bags Seeds, animal feed and pet-food products Herbal products, powders and supplements Hardware and small industrial parts PPWR-READY acceptance test Final acceptance can be performed using the customer’s actual paper, coating, printing ink, adhesive, bag dimensions and intended filling weight. The test can confirm: Dimensional accuracy Side-seam and bottom integrity Stable production speed Glue consumption Waste percentage Production traceability Batch-report generation Important regulatory information The MASTER BAG 300X is a PPWR-ready production platform. Final PPWR conformity applies to each finished paper-bag specification and depends on the actual paper, coating, ink, adhesive, components, intended use and recycling pathway. Machine CE conformity covers machinery safety and is separate from PPWR conformity of the finished packaging. Model year: 2026Machine type: Square-bottom paper bag machineBag type: Without handlesMaximum speed: Up to 180 bags/minCondition/configuration: Available according to selected equipment package Contact us for price, complete technical specifications, material trials, factory acceptance testing, installation, and delivery conditions. Bodpfx Acewzm I Ronell

Condition: used, Equalising block for low-bed semi-trailer Dimensions – see photos ##### PLEASE CALL – NO EMAILS! Bsdpfx Aszx R S Eecnell #####

Condition: used, Year of construction: 2000, Overview The SAME barrel support cradles are V-shaped metal supports specifically designed for wineries, ensuring stable and secure positioning of oak barrels during storage, handling, and washing operations. Their geometry guarantees optimal load distribution and perfect barrel support, reducing stress on the barrel structure. SAME standard supports are fully compatible with automated barrel washing lines, making them ideal for professional cellar operations. Technical Data:  A total of 488 units are included in this lot. Key Features - Equipment Type: Barrel support cradles / sleepers for wineries - Design: V-shaped structure for secure barrel positioning - Barrel Capacity: 2 barrels per support - Compatible Barrel Sizes: 225 to 700 liters - Manufacturing Process: Robotic MAG continuous wire welding - Structural Strength: High resistance to load, handling, and mechanical stress - Surface Finish: Oven-cured polyester powder coating - Compatibility: Suitable for automated barrel washing systems - Application: Wine cellar barrel storage and handling - Quantity: 488 units Dimensions (Standard 225 L Barrel Support) - Length: 1,430 mm - Width: 610 mm Blodeyiamrepfx Acnel - Height: 364 mm

Condition: used, Year of construction: 2003, Saw blade diameter: 350 mm, bore diameter: 30 mm, motor: 2 kW, speed: 3800 rpm. Extraction connection diameter: 95 mm. Weight: approx. 105 kg without stand. Cutting width at 90°: 430 mm, at 45°: 300 mm. Cutting height: 135 mm. Hydraulic return brake. Without stand and roller conveyors. Bedpfx Asyw Tziscnjll

Condition: used, Cross conveyor, 4-strand Conveyor length: 2.3 m Width: 4.2 m Location: Germany, near Lake Chiemsee. Bledpszx Eh Ujfx Acnsl

Condition: used, Log handling system for roundwood, 2-strand configuration Blsdpfx Acozx Ed Nensl Conveying length: 5.5 m Width: 2.8 m Location: Germany, near Lake Chiemsee.

Condition: used, HIGH SPEED DOWEL CROSS-CUT AND CHAMFERING MACHINE LOSER MOD. AA220 - Range of working diameter: 6 - 18 mm Bedeqpdkcepfx Acnoll - Capacity: about 7,500 - 15,000 dowels/hour

Condition: used, Year of construction: 1999, functionality: fully functional, cutting height (max.): 100 mm, cutting width (max.): 2,500 mm, saw blade diameter: 400 mm, height adjustment type: mechanical, Equipment: saw blade guard, Double-blade panel saw, Eima Type 122 Cutting width, min/max: 210-2500 mm Cutting depth: 2500 mm Maximum blade diameter: 400 mm Cutting height: ~100 mm Motor power: 2 x 4.4 kW Electronic cutting width adjustment Bledpfx Acjzwkrvjnsl

Condition: new, Year of construction: 2026, warranty duration: 11 months, TVM Ø 400 - The Versatile and Customizable Saw for Your Carpentry Workshop The TVM 400 is the all-purpose saw that is essential for your workshop. With a solid and high-performance structure, it is designed to provide an excellent solution for cutting small-section woods, quickly eliminating knots and imperfections. Thanks to the option of customizing it with accessories such as roller conveyors and stops, the TVM 400 ensures maximum versatility and productivity (discover more details in the ACCESSORIES section). Bjdpsv Iqaxofx Acnsll Key Features: Efficient and Cost-Effective: Ideal for small and medium-sized carpentry workshops, offering excellent value for money. Ease of Use: Perfect for use without the need for highly skilled personnel, saving time and resources. Reliability: Always ready for use, supporting all operational needs and reducing machine downtime. Cost Optimization: With the TVM 400, you get a durable machine that doesn’t require frequent maintenance interventions. Advantages: Operator safety ensured by a design aimed at reducing risks. Optimized ergonomics to improve productivity during processing stages. Wear compensation of materials without the need for frequent replacements. Simplified maintenance to reduce costs and increase efficiency. Ready for CURSAL accessories, offering full customization according to production needs. Rationalized cost/quality ratio, making the machine a smart investment. Applications: Production of semi-finished wooden furniture components. Manufacturing of window frames and similar applications. Small-batch production of various types, for specific needs. TVM Ø 500 - The Advanced Solution for High-Volume Production The TVM 500 is one of the most in-demand saws on the market for its ability to handle high-volume production with quality and precision. The optimal cutting section allows for the processing of 90% of squared boards and is perfect for industries that require high performance, such as packaging, construction, and the production of sofa frames and laminated panels. This machine offers maximum flexibility and precision in operations, thanks to advanced features such as: Electropneumatic stops, ideal for cutting stacked boards with repetitive measurements. Numerically controlled stops, for precise measurement management, even in complex processes. Discharge of semi-finished products via transfer systems, discharge tables, or roller conveyors, ensuring smooth and fast material handling. Main Advantages: High productivity for large-volume applications. Versatility in sizes and configurations, adaptable to multiple industries. Operational flexibility supported by advanced accessories. The TVM Ø 500 represents a strategic choice for those seeking a saw capable of meeting the most demanding challenges in the industry, while maintaining high standards of quality and efficiency.