Used Conformal Coating for sale (3,353)

Condition: repair required (used), Year of construction: 2018, machine/vehicle number: 1713613, temperature: 650 °C, overall weight: 1,900 kg, EXW – Dismantling and loading must be arranged by the buyer! MACHINE DETAILS Voltage supply: 3/N/PE 400/230 V AC, 50 Hz Rated current: 125 A Rated heating current: 104 A Heating power: max. 72 kW Motor power: 3 kW Lodpfxezx S Emo Abzeag Total power: 75 kW Dimensions & Weight External dimensions [mm]: 2,200 × 3,300 × 1,800 / 3,150 with lifting unit External dimensions with lifting unit: 3,150 mm Internal dimensions: 2,000 × 1,000 × 1,000 mm Weight: 1,900 kg Maximum temperature: 650 °C Protection class: IP40 EQUIPMENT Operating manual CE/conformity documents Note: One burner row is defective. Electrical repair is required.

Year of construction: 2012, condition: used, Machine is in operational condition and recently taken from the operation. Machine is located in Estonia and is available to be shipped. Ask for additional information! Lodpoxm S Htsfx Abzsag

Year of construction: 2025, condition: new, A conformal coating machine is an industrial device used in electronics manufacturing to automatically apply a protective conformal coating to printed circuit boards (PCBs). This coating shields sensitive electronics from external influences such as moisture, dust, chemicals, corrosion, and temperature fluctuations. The machine applies a thin, uniform protective layer to selected areas of the PCB. This process is fully automated and reproducible, which is essential for quality and reliability in serial production. Transport System Transports PCBs through the machine (inline or stand-alone). Coating Application Depending on the configuration: - Spray coating (selective or full coverage) - Jet coating - Film or mist application techniques XYZ Positioning and Motion System Provides precise control of the spray valve. Vision and Camera System (optional) For alignment, inspection, and process monitoring. Masking / Selective Coating Protects connectors, test points, and other areas not to be coated. Drying or Curing Module For UV, thermal, or air curing, depending on the coating material. Control Software Programmable for various PCB designs and coating recipes. Suitable Coatings - Acrylic - Polyurethane - Silicone - Epoxy - UV-curable coatings Applications ICT conformal coating machines are widely used in: - Automotive electronics - Industrial control systems Ledpsydnlhsfx Abzjag - Medical equipment - Aerospace - Consumer electronics Advantages - Consistent and high coating quality - Reduced material waste - High repeatability - Suitable for mass production - Improved reliability and lifespan of electronics

Year of construction: 2008, condition: used, Operational condition machine! - 4 axes - Component height up to 100 mm - 3 valves - 2 tilters for valve inclination Lasdpfx Abexlflgezsg - 2 tanks - External programming PC

Condition: used, Year of construction: 2021, Machines in operational condition! Ask for additional information! Lasdpfx Ajwcrthsbzjg

Condition: used, Year of construction: 2023, Operational machines! Lasdpfx Abewctnaezeg Ask for additional information!

Condition: good (used), functionality: fully functional, Complete Industrial Powder Coating Line for Sale We offer a complete industrial powder coating line in good working condition. The installation has been professionally maintained and is suitable for coating a wide range of steel and metal products. Equipment includes: Pretreatment system Drying oven Powder coating booth Powder spray equipment Curing oven Conveyor system Electrical control system The complete line is available for immediate sale and can be inspected by appointment. Ljdpfx Ajzqur Hobzjag Condition: Well maintained Fully operational before dismantling Suitable for industrial production GEMA OptiStar CG07 Powder Coating Gun

Condition: excellent (used), Year of construction: 2019, operating hours: 7,000 h, functionality: fully functional, MACHINE CONSTRUCTION: - Cast iron bed, spindle head, and saddle system developed through computer-aided design and analysis (CAD/CAE), ensuring high rigidity and vibration damping - Fully supported table guide in every working position - X-axis (table movement) on 2 precision cylindrical roller guides, supported by 6 runner blocks each - Y-axis with 2 precision cylindrical roller guides Lsdpjzzf Ruofx Abzeag - Z-axis with hardened and ground guideways, with TURCITE-B coating - Guideway protection via metal telescopic covers - Hydraulic counterweight / balance system - CE conformity Axes: - Preloaded ballscrews with large pitch for long-lasting precision - Digitally controlled, liquid-cooled ballscrew on the X-axis - Gear-driven ballscrews, ballscrew nuts with centralized lubrication, and lifetime-lubricated bearings CONTROLLER & ELECTRONICS + CAPACITY: - High-speed CNC, 1 ms block processing time - Storage capacity: 120 GB SSD - Technology program memory: 100 GB SSD - Number of processor cores: 4 CNC operating system: - User interface operating system: Windows 10 - Technology program storage: WINDOWS file system - Total storage capacity (system program, PLC, parameters, technology program memory) on a single SSD - New user interface (40-00005216-00w) SCREEN: Color graphical LCD touchscreen COMMUNICATION: USB, Ethernet, EtherCAT MEASURING SYSTEM: - HEIDENHAIN absolute EnDat 2.2 - PROGRAMMING: ISO, myNCT TECHNICAL DATA: - X-travel: 2100 mm - Y-travel: 1500 mm - Z-travel: 1000 mm Distance from spindle nose to table surface: 200~1000 mm Distance between columns: 1650 mm Distance between table and gantry/crossrail: 1710 mm AXES: - Rapid traverse speed X / Y / Z axis: 20 / 20 / 15 m/min - Max. working speed: 10 m/min - Motor power: 4 kW ACCURACY (according to JIS6338): - Positioning accuracy: +/- 0.01 mm (In the entire working area!) - Repeatability: +/- 0.004 mm TOOLING: - Max. tool diameter / with adjacent tool omitted: 125 / 215 mm - Max. tool length: 400 mm - Max. tool weight: 20 kg - Optional tool taper: SK50 Accessories & Equipment: - Angle head (manual) - Chip conveyor - Coolant flush gun - 15 pcs of SK50 tool holders - Machine leveling feet - Manuals The machine is in good used condition and operates accurately.

Condition: refurbished (used), functionality: fully functional, FREWITT MG-803 OSCILLATING SCREENING MILL / GRANULATING MACHINE Completely overhauled in 2026 – Pharmaceutical version – comprehensively documented CONDITION Used Frewitt MG-803 in exceptionally good, fully overhauled condition. As part of a comprehensive mechanical and electrical general overhaul, the machine was completely disassembled, cleaned, technically refurbished, and professionally reassembled in 2026. The entire overhaul is detailed in a 101-page overhaul report with numerous photos, drawings, spare parts lists, and work steps. APPLICATION Oscillating screening and granulating machine for applications, in particular, in the pharmaceutical, chemical, and food industries. Stainless steel version with professionally refurbished product-contact surfaces for high hygienic requirements. COMPLETE OVERHAUL 2026 The following work was carried out as part of the overhaul, among other things: - Complete disassembly of the machine - Overhaul of fixed and moving bearing heads - Refurbishment of the connecting rod drive and guide units - Ultrasonic cleaning and refurbishment of the components - All deep groove ball bearings, cylindrical roller bearings, and linear bearings replaced - All radial shaft seals and Garlock seals replaced - Joint screws newly manufactured from stainless steel 1.4305 Lasdpfx Ajzu Tu Isbzsg - Electric motor and gearbox completely overhauled by a specialist company - New bearings and seals in the drive - Drive components sandblasted and protected with a protective coating - New conductive and lockable swivel casters - Safety device of the machine door overhauled - Complete reassembly and final function test PHARMACEUTICAL SURFACE FINISH All product-contact stainless steel surfaces were professionally ground and polished by a specialized company. Surface roughness of product-contact surfaces: Ra ≤ 0.8 µm TECHNICAL DATA Manufacturer: Frewitt Model: MG-803 Year of manufacture: 1997 Machine type: Oscillating screening/granulating machine Version: Pharmaceutical/stainless steel version Installation: mobile Product-contact surfaces: Ra ≤ 0.8 µm Complete overhaul: 2026 SCOPE OF DELIVERY - Frewitt MG-803 - Stainless steel feed hopper - Stainless steel discharge hopper - Rotor - Screening unit / sieve basket with lateral guide rails - Extensive selection of various sieve inserts - Complete drive and connecting rod system - Protective cover and safety sensors - Mobile stainless steel frame with new conductive, lockable rollers FUNCTION TEST After the complete overhaul, the machine was completely assembled and subjected to a function test. The MG-803 runs very smoothly and vibration-free and is ready for immediate use. DOCUMENTATION Extensive documentation available: - Original operating instructions - Technical drawings - Parts lists - Electrical documents - Maintenance and conformity documents - 101-page overhaul report of the complete overhaul in 2026 with extensive photo and work documentation INSPECTION / TEST RUN Inspection and test run possible by appointment. Subject to prior sale and errors.

Condition: good (used), 100.000L steel tank. Fire / drinking water underground or above-ground Dimensions 16.9 x 3.10m wall thickness: 5mm weight 8mm approx. 12t, weight 5mm approx. 9t. The tanks are sandblasted by us, equipped and then painted internally and externally with a corrosion-resistant epoxy resin coating. As standard, the tank has a suction pipe with a suction basket, a breathing chimney, a supply and drain connector, a ladder and a hatch. For an additional fee, we install a float valve and a manhole chimney We can weld additional accessories, e.g. a platform. We have tanks with and without beds. Ljdpfx Abjdbllzezjag Steel beds for PLN 1800€ net. The tanks have a tightness certificate and a declaration of conformity. We offer delivery to the customer.

Condition: like new (used), RR120 is a high-volume system for printing, coating, inspecting, and drying rolls. Its modular design offers flexibility for specific applications and needs Reel to Reel Handling System 7 Dispensing Channels (Tandem Pumps Bio-Jet, Front Line and Air Jet Dispensing Technologies Print up to 7 Lines Simultaneously Automated Dispense Tracking for Precision Line Placement Perform Multiple Applications on One System Adjustable Tension for Handling Backed/Unbacked Membranes Easy to Set up, Operate and Maintain Lsdpjya Hvqsfx Abzoag Data Storage to Support Multiple Applications Many System Options Can be Upgraded after Purchase

Condition: good (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 10000241, workpiece height (max.): 160 mm, workpiece width (max.): 310 mm, number of spindles: 4, WEINIG POWERMAT 1500 - SPECIAL MACHINE CONFIGURED FOR MILLING WOODEN DOOR FRAME PANELS Working width 30 - 310mm (with tool flight circle 93-125mm) Working height 10 - 160mm (with tool flight circle 93-163 mm)Description of machine parameters Number of spindles 4 Spindles bottom 1 Spindles right 1 Spindles left 1 Spindles top 1 Separate motor for each spindle Electronic feed incl. brake, infinitely variable 5-40 m/min. Lajdpfx Asuygcwsbzog Short infeed table 1.2 m long with 2 driven rollers above the table Hard-coated machine table surface Manual lubricant pump WEINIG Comfort Set Control system WEINIG MEMORY PLUS-SYSTEM CE mark Declaration of Conformity

Condition: good (used), Year of construction: 2015, CNC milling machine, milling and engraving machine, MECANUMERIC, MECA EASY 1510 – used: Price ex works: €23,500 (net)! Manufacturer: MECANUMERIC Type: MECA EASY 1510 Year of manufacture: 2015, former DEMO MACHINE Three-axis milling machine in a flat-bed gantry design. Working travels X, Y, Z axes: 1,050 / 1,550 / 200 mm. Table frame and gantry: Designed as a solid, stress-free, fully welded steel structure, powder-coated. Heavy table substructure for mounting the vacuum table VAC-CAISSON, designed as a cassette, with air passage holes in a 10 mm grid. Feed rate: 300 mm/sec (18 m/min) in rapid traverse and feed mode! Guidance on rails, slide shoes with upstream ball screw. Transmission: Precision ball screws Ball screw on all axes Maintenance-free, brushless servo drive motors (750 W on X and Y, 300 W on Z) Repeat accuracy: +/- 0.025 mm Mechanical resolution: 0.0006 mm Numerical control: Mecanumeric CN 7000 ISO-G-Code Machine operation via a 10" touch screen display Complete documentation and CE declaration of conformity in accordance with the basic safety and health requirements of Vacuum table 1,020 x 1,500 mm Support/work table designed as a closed aluminum plate, on which vacuum passage holes are arranged in a 10 mm grid. The table is divided into 2 main areas, which can be switched on manually. Vacuum generation by one (1) two-stage high-performance vacuum side-channel compressor. Motor power 4.5 KW, suction capacity 320 m/hour, filter and silencer included. Due to the overall size and potential heat development, the pumps are housed outside the machine body. The electrical control and safety devices for the pump and valves are integrated in the machine control cabinet or on the control panel. Milling spindle HF40-ATC24 ENC Conversion Module APSG-A Vacuum generation by one (1) two-stage high-performance vacuum side-channel compressor. Motor power 4.5 KW, suction capacity 320 m/hour, filter and silencer included. Due to the overall size and potential heat development, the pumps are housed outside the machine body. The electrical control and safety devices for the pump and valves are integrated in the machine control cabinet or on the control panel. High-frequency motor milling spindle 4KW Power: 4KW Speed range: up to 24,000 rpm. Fast tool change with pneumatic ejection, ISO30 taper. Tool holder: Clamping diameter up to 2-16 mm. Lodezbybiopfx Abzjag Cooling with compressed air 6 bar 20 m/h Converters and switching elements are included in this position. Safety enclosure for the machine Front with door and safety lock - Position PROTCHOC omitted - Preparation of the electrical control and switching elements as well as the output socket for a high-performance industrial vacuum cleaner. Changer CH 6 S Condition: good Available: immediately Location: Delmenhorst

Condition: used, Ex-protected filter unit, extraction system, central extraction cartridge - impulse filter P. RIES GmbH Type 330 D ATEX Cartridge filter system, rectangular filter unit, central welding fume extraction Ljdpfx Ajy N Duqebzsag Machine no. 10011932 Year of manufacture: 2020 - as new, unused Airflow rate: 3,300 m³/h Airflow rate: 0.9 m³/sec Filter area: 20 m² (1 piece cartridge filter) Differential pressure: 3,300 Pa (33 mbar) Extraction connection at filter inlet: 2x Ø 150 mm Exhaust connection at filter outlet: sound insulation hood Compressed air connection: approx. 8 bar Motor power: 3 kW Mains connection: 400 Volt, 50 Hz - Explosion-protected design ATEX II 2Db 125°C / 3G T4 - Pneumatic rotating filter cleaning, manual via push button - Manometer for differential pressure display (vacuum display in mbar) - Service door for filter replacement - Filter stage 1 = 1 cartridge filter Ø 325 mm, length 900 mm P-RIES, type cartridge filter 20.1 m², BGIA/IFA class M, antistatic - Filter stage 2 = filter outlet (sound insulation hood) equipped with 9 activated carbon filter cartridges, type AKZ 2500V, 266 m³/h per filter cartridge - Built-in radial fan, type IE 3-premium efficiency, 12% improved efficiency - Robust steel construction in RAL 7035 light grey, antistatic powder-coated - Dirt collection container as pull-out drawer approx. 70 litres (440 x 530 x 300 mm) - EC Declaration of Conformity, operating instructions with wiring diagram available Required space (L x W x H): 670 x 700 x 2430 mm Weight extraction unit: 211 kg Transport dimensions on pallet (L x W x H): 930 x 1350 x 1950 mm Weight incl. transport pallet: 236 kg As new, unused, ex stock

Condition: used, Year of construction: 2007, functionality: fully functional, input voltage: 250 V, We offer this used Wagner Ecotech System powder coating equipment, manufactured in 2007. - Powder coating booth with spray robot (6 spray guns) - Donaldson Torit dust extraction system (11 kW) - 75m automatic Emotec conveyor system (disassembled). Year of manufacture unknown. Lajdpfx Abszn Ixnozeg

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 5,600 mm, total length: 11,200 mm, total width: 5,100 mm, type of input current: three-phase, warranty duration: 24 months, inner dimension height: 4,970 mm, inner dimension length: 11,000 mm, temperature: 80 °C, inner dimension width: 5,000 mm, air demand: 52,000 m³/h, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), power: 45 kW (61.18 HP), fuel: liquid petroleum gas (LPG), input frequency: 50 Hz, energy consumption: 45 kWh, insulation thickness: 50 mm, nominal power: 250 kW (339.91 HP), sheet thickness steel (max.): 2 mm, Equipment: lighting, * Air Preparation Unit: The air preparation unit is a recirculation system that supplies the cabin with filtered fresh air and exhausts used air during the painting process. It heats the air to 60 °C, mixes the used air with 10% fresh air via an automatic multi-damper system, and reheats the air before routing it back into the cabin. The air is heated using a burner and a heat exchanger, both made of high-quality 304 stainless steel and housed within the fresh air unit. During painting, the air is filtered twice (via front and ceiling filters) before it enters the cabin. The contaminated air is also filtered twice (through inlet and outlet filters) before it exits via the exhaust unit. Air preparation units are insulated like the side walls to minimize heat loss and are protected against potential vibration and noise thanks to rubber seals on the covers. The exhaust air is regulated by a damper in the outlet duct, which helps control the internal pressure of the cabin. * PRINCIPLES OF CABIN OPERATION: The processes in the cabin are controlled via a control panel that manages the following steps: * PAINTING PROCESS: During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled by the extraction unit. Floor filters (paint stops) capture paint particles, and the air passes through the final exhaust filters before being discharged. * FLASH-OFF PROCESS: After painting, the cabin operates for approximately 15 more minutes to purge residual solvents and thinners. During this phase, fresh air from outside continues to circulate in the cabin. * DRYING PROCESS: In this phase, 80% of the air passing through the cabin is heated to 60 °C and supplied to the cabin via a distributor. As 20% of the solvent is released during drying, these solvents are expelled with the exhaust air. Industrial coatings are typically dried at 60 °C, but the cabin temperature can be adjusted via the control panel as required. * COOLING PROCESS: After the 30-minute drying process, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the 5-minute cooling phase, fresh air from outside circulates in the cabin, after which the system stops automatically. Laedpewzl Hxefx Abzsg ELECTRICAL AND ELECTRONIC EQUIPMENT: These control panels manage the functions and operation of all machinery and devices inside the cabin. The control panel is constructed from durable galvanized sheet metal and steel profiles and is fully enclosed to protect against dust and moisture. Electrical devices and control panels: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control lines between the panel and motors or other electrical devices. • Electrical wiring is designed to allow for cabin relocation if necessary. • Operating devices use 380 V 50 Hz, while control devices use 220 V.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, total length: 50,000 mm, We offer this Nordson automatic powder coating line, in very good condition, manufactured in 2016. It is fully operational, so you can visit it any day to see exactly how it works. It includes a degreasing area with an acid bath, followed by drying/preheating, painting, and polymerization. Lsdpfx Abez Dhk Hjzeag If you have any further questions or require more information, please do not hesitate to send us a message or call us.

Condition: refurbished (used), Year of construction: 2012, operating hours: 19,376 h, functionality: fully functional, machine/vehicle number: 57755, RÖSLER Vibratory Finishing Machine / Rotary Vibrator – fully functional – newly coated – in very good condition For sale is a high-quality vibratory finishing/rotary vibrating system from the renowned manufacturer RÖSLER. The machine is in very good technical and optical condition, is fully functional, and can, of course, be inspected on-site after prior arrangement. Lodpsz D Sn Nofx Abzeag Price: €14,500 net A particular advantage of this machine is the condition of the processing bowl: the machine was newly coated directly by the manufacturer RÖSLER. The coating is therefore in very good condition. The machine has been carefully maintained and overall gives a very well-kept impression. Depending on the abrasive media and process used, the system is suitable for deburring, rounding, smoothing, cleaning, and surface finishing of workpieces. Thanks to its robust industrial design, it is designed for professional use in production, metalworking, and surface treatment. The machine is offered including control cabinet/control system and the components shown in the pictures. The control system, drive, and mechanical components are functioning perfectly. The machine is ready for use and fully functional. Condition & Features: * Manufacturer: RÖSLER * Industrial vibratory finishing/rotary vibrating system * Fully functional * Processing bowl newly coated by the manufacturer RÖSLER * Very good technical condition * Well-maintained overall optical condition * Robust industrial design * Including control cabinet/control system * Separation/screening zone and discharge chute available * The machine is currently secured for transport on a pallet * On-site inspection possible by appointment * Selling price: €14,500 net plus statutory VAT.

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK FM300S Dust Extractor with Dust Filters The CORMAK FM300S dust extractor with dust filters is a professional machine designed for the efficient removal of chips, sawdust, and fine dust generated during wood processing. Thanks to its dual filtration system, powerful three-phase motor, and well-designed construction, the FM300S woodworking dust extractor is an ideal solution for both medium-sized and larger production workshops. Main Advantages of the Machine High extraction capacity – 3,900 m³/h – effective operation even with large amounts of contaminants Dust filters included – ensure efficient particle separation and cleaner air 2.2 kW three-phase motor – guarantees continuous and reliable operation Balanced metal impeller – reduces vibration and noise Mobile construction with 4 castor wheels – easy to move even in confined spaces Quick bag fastening system – convenient and fast maintenance 1 x 150 / 3 x 100 mm extraction outlets – enables simultaneous operation with several machines Construction and Technology The FM300S dust extractor is built on a stable steel frame, powder-coated for improved resistance to industrial conditions. The machine is equipped with a WhirlWind series metal impeller, which provides efficient suction while maintaining a low noise level. The large extraction outlet allows the machine to operate with up to three processing stations simultaneously, significantly increasing the productivity of the workshop. Precision and Operating Efficiency The advanced extraction system combines high negative pressure with efficient filtration of fine particles through integrated dust filters. As a result, the CORMAK FM300S sawdust extractor not only helps keep the work area clean but also contributes to operator health and the reliable operation of woodworking machinery. Applications The FM300S is designed for professional users who require continuous operation with saws, milling machines, planers, and other equipment generating significant amounts of sawdust and wood chips. The dust extractor is ideally suited for: woodworking workshops, furniture manufacturing plants, craft workshops, local dust extraction systems in production lines. Standard Equipment mobile metal base with castor wheels, 2 fabric waste collection bags, 2 dust filters (main filters), Y-shaped extraction connector. Optional Equipment 100 mm extraction hose, Laedpfx Absz A T Hqozjg galvanized clamps, filter cartridges with filtration efficiency down to 2 microns. Technical Specifications Specification Value Extraction capacity [m³/h] 3,900 Negative pressure 1,750 Pa Noise level 75 dB Bag capacity [l] 150 Number of bags 2 (waste collection) Diameter of extraction outlets [mm] 1 x 150, 3 x 100 Dimensions (L x W x H) [mm] 1,400 x 570 x 1,960 Weight [kg] 64 Motor power [kW] 2.2 Power supply 400 V / 3-phase User and Maintenance Manual (DTR) YES CE Declaration of Conformity YES

Condition: good (used), Year of construction: 1993, Giardina oil laquer roller Ljdsz D I U Espfx Abzsag 2 roller 2 brush spreader

Condition: excellent (used), Forklift Attachment Drum Gripper Suitable for 2 x 200 L steel ribbed/steel lid drums Description Firm hold even on uneven floors Sturdy, welded steel construction Forklift attachment module with robust powder coating in blue (RAL 5010) Quick, easy installation on the forklift Lsdpfx Abjxbq Irezsag Automatic locking when lifting the drum Automatic clamp release when setting down Securely holds steel ribbed and tension ring drums Height adjustable Technical Specifications Finish: Hot-dip galvanized Area of ​​application: Lifting/transporting steel drums Outer width [mm] 1050 Outer depth [mm] 1080 Outer height [mm] 975 Fork pocket spacing [mm] 730 Fork pocket W x H [mm] 150 x 55 Total load capacity [kg] 700 Material: Steel Approval / Certificate Description 1 2006/42 DECLARATION OF CONFORMITY Weight [kg] 110 Find more items - new and used - in our shop! International shipping costs on request!

Condition: used, This listing is for the Basair Laminair Flow P Range Safety Cabinet The unit is in full working condition and is ready for immediate use Lsdpfx Aoyu Titsbzsag Bassaire P-Range Laminar Flow Units are designed to provide an ultra-clean, particle-free environment to protect products, conforming to BSEN ISO 14644 (ISO Class 4 & 5) standards. Constructed from high-quality powder-coated white carbon steel or stainless steel, these units offer reliable vertical laminar airflow and are suitable for laboratories requiring strict contamination control

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 1605269/1, total width: 630 mm, total height: 1,115 mm, total length: 1,010 mm, working width: 460 mm, input voltage: 400 V, type of input current: AC, overall weight: 200 kg, power: 0.37 kW (0.50 HP), roller diameter: 100 mm, passage height: 80 mm, feed rate X-axis: 35 m/min, height adjustment type: mechanical, tank capacity: 2 l, roll width: 450 mm, input frequency: 50 Hz, workpiece height (max.): 80 mm, Equipment: double-sided, For sale is a well-maintained glue and roller application machine from Axel Wirth Maschinen GmbH, type LW 100/450. The machine was manufactured in 2021, has comparatively few operating hours, and is in technically perfect and well-maintained condition. A particular advantage is the adjustable working speed or feed rate (6 - 35 m/min). This allows the machine to be flexibly adapted to different workpieces, materials, and application media. The machine is mounted on a sturdy, mobile base with lockable wheels. As a result, it can be easily moved within the production area and safely positioned at the respective location. A total of two identical machines are available. The stated price applies per machine. An attractive package price is possible if both machines are purchased. The LW 100/450 is suitable for the uniform application of liquid and pasty media onto flat or textured workpieces, for example: - Glue and adhesive - Oil and wax - Stain and primer - Paints and dispersions - Resins and comparable application media Among other materials, wood, solid wood, parquet flooring, chipboard, cork, cardboard, metal, stone, rubber, and insulation materials can be processed. The application quantity can be adjusted via the lateral adjustment devices. The rollers and glue trays can be removed with a few simple steps, making the machine easy to clean. Ledpjzr H Aasfx Abzjag Technical data and equipment Manufacturer: Axel Wirth Maschinen GmbH Type: LW 100/450 Year of manufacture: 2021 Nominal width: 450 mm Working width: approx. 460 mm Passage height: approx. 80 mm Diameter of the application rollers: 100 mm Capacity per glue container: approx. 2.3 liters Drive power: 0.37 kW Adjustable working speed or feed rate Application rollers above and below Separate control cabinet Main switch and emergency stop Mobile base with lockable wheels CE marking Condition: used, well-maintained, and technically perfect Operating hours: comparatively low Inspection and test run are possible after prior appointment. Collection at the Leun location. Shipping by freight forwarder can be organized if required, upon agreement. If you have any questions or are interested, please do not hesitate to contact us. We will be happy to provide further information and photos. Price: €5,900 (negotiable) per machine plus VAT (can be shown). Package price for both machines: on request All information is provided to the best of our knowledge. The sale takes place under the conditions applicable to the seller for used machines.

Condition: new, Year of construction: 2025, functionality: fully functional, grinding length: 1,500 mm, grinding width: 300 mm, total length: 3,000 mm, total width: 1,000 mm, grinding height: 150 mm, grinding wheel diameter: 300 mm, overall weight: 2,500 kg, grinding spindle motor power: 11 W, grinding wheel speed: 1,450 rpm, Equipment: documentation/manual, The GRAFS GRfix-1500e is a heavy-duty surface grinding machine designed for rough and high-performance grinding of steel plates. Developed and manufactured entirely in Poland, this model combines robust construction, long service life, and user-friendly electronic control. Main features: - Electromagnetic table 300×1500 mm, S-pole, holding force 120 N/cm² - Grinding motor 11 kW, high-quality Polish production - Segmented grinding wheel Ø300 mm, 6 aluminium oxide segments - Laser sensor for automatic workpiece height detection (as an additional option) - PLC control (Mitsubishi) with 7” HMI touchscreen – programmable grinding cycles (rough pass, automatic downfeed 0.001–0.05 mm, spark-out, pause, auto-stop) - Stepper motor feed with encoder for precise vertical adjustment - Mitsubishi inverter – variable carriage speed 1–16 m/min - Remote diagnostic support via Internet (Wi-Fi connection) - External coolant filtration system MS60 with rotary magnetic drum separator, 150 L tank, and 60 L/min pump - LED 24V working light and internal coolant pipe for table flushing - Powder-coated body: RAL7012 (frame) / RAL7021 (carriage) Mechanical design: - Extremely rigid welded steel body (10 mm thick plates, stress-relieved) - Carriage on PWTR precision rollers for smooth and silent motion - Replaceable hardened steel guide strips - Quick manual positioning of the carriage above the workpiece - Fast up/down movement of the spindle motor for easy tool change - Easy mounting system for the grinding wheel – only three bolts - Maximum workpiece height: 150 mm Optional equipment: - Accordion-type bellows covers - Alternative coolant filtration units (magnetic, paper, or combined) Advantages: - Perfect for rough surface grinding of large steel plates - Designed for high efficiency and long-term stability - Fully European components – Mitsubishi Electric control system - CE conformity, electrical inspection and Polish technical documentation (DTR) included Warranty: 12 months Technical data summary: Parameter Specification Grinding table: 300 × 1500 mm (electromagnetic, S-pole) Max. workpiece height: 150 mm Grinding wheel: Ø300 mm, 6 segments Ledpfxexmhyij Abzeag Spindle motor power: 11 kW Carriage speed: 1–16 m/min Downfeed: Automatic 0.001–0.05 mm Control system: PLC + 7” HMI Mitsubishi Coolant system: MS60 magnetic separator, 150 L tank, 60 L/min pump Weight: ~2800 kg (depending on configuration) Power supply: 400V / 50Hz Made in Poland The GRAFS GRfix-1500e is a professional surface grinder built for intensive, rough grinding applications where high metal removal rate and long-term precision are essential. A reliable, industrial-grade solution for steel fabrication shops, tool manufacturers, and service centers.

Condition: new, Year of construction: 2026, BUMEX Sp. z o.o. | Industrial Powder Coating Technology A professional, compact industrial powder coating system designed for serial production and demanding workshop applications. Engineered with a strong focus on process stability, structural durability and premium coating quality. A complete solution ready for immediate operation in professional powder coating facilities. Scope of Supply ✅ Powder Coating Curing Oven Lajdpfehd Nrajx Abzog 1200 × 1500 × 1800 mm ✅ Powder Coating Spray Booth with Filtration System 1400 × 800 × 1400 mm POWDER COATING OVEN — BUMEX INDUSTRIAL STANDARD Technical Data Working dimensions: 1200 × 1500 × 1800 mm Total power: 18 kW Key Construction Features ✔ stainless steel front frame preventing paint peeling at the door-to-frame contact area — long-term durability and premium appearance, ✔ excellent temperature uniformity thanks to an efficient air circulation system ensuring stable curing without overheating or cold zones, ✔ heavy-duty industrial construction designed for continuous operation, ✔ 4 patented BUMEX safety locking systems guaranteeing perfect door pressure, chamber tightness and maximum operator safety, ✔ internal loading trolley and external trolley for ergonomic handling, ✔ optimised airflow circulation ensuring repeatable curing quality. Result: fast heating, stable temperature control and perfectly cured powder coating finish. POWDER COATING SPRAY BOOTH Technical Data Working dimensions: 1400 × 800 × 1400 mm Fan power: 1.5 kW Airflow capacity: 6500 m³/h Premium Equipment ✔ construction made from powder-coated galvanised steel panels providing high corrosion resistance, ✔ 2 × 100% polyester filters mounted in TWIST system — fast installation and removal without tools, ✔ automatic filter cleaning system maintaining constant performance, ✔ highly efficient and low-noise industrial extraction fan, ✔ stable airflow ensuring effective powder capture, ✔ ergonomic working area for operator comfort. BUMEX Standard ✔ CE conformity, ✔ full technical documentation, ✔ manufacturer warranty, ✔ warranty and after-sales service, ✔ professional technological consulting. Commercial Terms ✔ own transport — individually quoted, ✔ VAT invoice provided, ✔ customised configurations and dimensions available. BUMEX Sp. z o.o. We design industrial equipment built for long-term reliability, safety and predictable performance.