Deutz f 12 l 413 for sale

Your location was not identified (Edit)
Enter your address
or
Move
6

Motors Deutz / Mann Kombi Luftfilter universal 01181270

Emmerich, GermanyGermany dealership location
18056 km
ready for operation (used)
Original Deutz combination air filter, new manufacturer: MANNDeutz original partial numbers: Kombi Filter: 01181270 filter insert: 0118142Safety element: 01180869diameter connector plucks outside: About 60 mm multiple on inventory condition for the purchase completion is one Buyer's business---business activity and their proof of the contract. Please send us proof of your business--business activity (e.g. VAT identification number, business license or association or chamber card) after the compl... more
6

Motors Deutz / Mann Kombi Luftfilter universal 01181280

Emmerich, GermanyGermany dealership location
18056 km
ready for operation (used)
Original Deutz combination air filter, new manufacturer: MANNDeutz original partial numbers: Kombi Filter: 01181280filter insert: 0118257Safety element: 01180870 diameter connector plucks outside: About 70 mmMultifold on inventory condition for the purchase completion is one Commercial activity of the buyer and their corresponding proof. Please send us proof of your business/business activity (e.g. VAT identification number, business license or association or chamber card) after the completion o... more
9

BINDERY - FINISHING - bindery-miscellaneous Billhöfer Gula Speed CGS JKN 112

Nürnberg, GermanyGermany dealership location
17854 km
1988
ready for operation (used)
UV coating machine speed CGS JKN 112 Gula Year 1988 - serial-No. 1743 Format min 300 x 500mm Format to 820 x 1120mm Automatic Mabeg feeder Grammage 60 up to 500 gr/m2 card board Description: With hot air IR dryer UV lamps Cooling section Dmtdkg3 Machine for operation: solvent coating – UV-coating - polymer coating -Available immediately- -can be inspect- stock--on more
13
Assortment Fraeser and various groove discs etc. C0nqll9 Mounting holes 30mm (partly with reducing ring), but also some with 40mm bore, see photos Swivel knife head, rounding cutter, profile cutter large with some profile knives, groove discs, joining cutters and two planing heads Brück. Sale only completely as shown. PLEASE NOTE: The Fraesers are either only approved for mechanical feed, or the BG test, or MAN marking is missing or is no longer readable, therefore we expressly sell the... more
6
Vehicle data - make: BT - type: TSE 300 / / 1293 STD control position for fast a and exit - drive type: electric - load capacity: 3000 kg - load Centre of gravity:-lifting height: 0 mm - range: 0 mm - year: 2011 - operating hours: 1293 - internal No.: A0362 _ Mast data - mast type:-lifting height: 0 mm - height: 1650 mm - free lift: 0 mm - carriage: 0 mm - forks: 0 x 0 x 0 mm _ Dimensions - length: 0 mm - width: 0 mm - height: 1650 mm - weight: 1750 kg _ Battery & charger - battery vol... more
1
Operating hours: 54400 h Maximum laser power: 2 kW Max. sheet metal size: 2540x1270 mm Travel distances: X: 1270 mm Y: 1270 mm Z: 300 mm Sheet thickness: 3-12 mm Nmvih Maximum table load weight: 220 kg Cutting speed: 0-20 m / min Machine weight: 4700 kg Dimensions: 4200x2200x2100 mm more
2
Make Single Temperiertechnik gmbh, Type STL 1-27-B10/20-TKS6, [...] 080137, Temperating machine , Water heater , Heating medium: water, Heating capacity 27 KW, Electric capacity 29 kVA, Temperature 90 gr.C, Motor 0,9 KW 400 Volt, With temperature controller , New 2008, Mounted on wheels , With switch , Floorspace 1,1x0,4 M, Total height 0,9 M, Weight 120 KG What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shippi... more
12
68 m pallet rack Saeed PR600 Bejfrigyia New and used goods, see pictures. Height: 4.1 m Depth 125 cm strap length 3,3 m Load / Fach 4400 kg galvanised frame Carrier blue Negotiating price: € 6.220,--net ex warehouse Offer consists of: + Pre-assembled 21 St. frame, depth 125 cm, height 4.1 m new + 80 St. carrier, length 3,3 m, 4400 kg load / expert needed + 160 St. a suspension fuses + 42 St. concrete anchor + 40 level shelves Product is in stock. Transport and mounting... more
3

Folding machine Multigraf Eurofold 235-121

Neuhausen-Schellbronn, GermanyGermany
18042 km
good (used)
- Inlet width max. 35 cm - Underfloor feeder with suction/blowing air - Steel/polyuretan rollers - 2 folding pockets Bfaotdxwma - built-in tool for creasing - Tape shed display The machine is in production and will be available in mid-August. more
1
2 millingheads: - universal milling head - huron milling head CNC controlled milling machine, but also possible to use the handwheels for conventional milling and also possible to use the machine with electric movements by simply pushing the buttons. Ju3kvi Max workpiece length: 2500 mm Max workpiece width: 1600 mm Max workpiece height: 1200 mm Horizontal spindle: - ISO 50 - 20 HP - 35 gt; 1270 rpm Vertical spindle: - ISO 50 - 15 HP - 40 gt; 1535 rpm more


deutz f 12...
daily

New machines via email!

Stay updated!
5
extruder 90/20D, Accuhead 6,5 ltr. Closing force 500 kN Bfajl7ucgp more
5

Injection moulding 501 - 3000 ton. BATTENFELD BA8000/12000HM

Cerreto D'Esi, ItalyItaly dealership location
17814 km
1997
ready for operation (used)
Tonnage:800 Clearence between tie-bars:1120 x 1020 Screw diameter:120 Calculated shot volume:6786 Min/Max mould thickness: 500/950 Robot connection Euromap-12:Yes Euromap: 8000/12000 Mov. plasten stroke: Uaqvmqzh 1050 Akkumulator: Yes more
2
Make Winkel Schweisstechnik GmbH (DE), Type Stripper filter, No WS-5160, New 2012, Capacity 45 m3/h, Max temperature -10/170 [...] Pressure -1/6 Bar, Content 34 ltr, Filter surface 0,45 m2, Number of bags 1, Mounted on legs , Floorspace 0,4x0,4 M, Total height 1,4 M, Weight 100 KG What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines in Ba... more
5
Linde BT SW120 Used goods, see pictures. Manufacturer BT Electric lift trucks Built in 2006 Lifting height 2.7 m Xzy7wrld Load capacity/load 1.2 tons Negotiation price: on request! Goods are in stock. Transport possible on request. Visit possible at any time by appointment. More information on request. Constantly over 5000 lfm pallet racks in stock by numerous manufacturers. (changes and errors in the technical data, information prices and intermediate sale reser... more
4

Borers SF125L Borer SF125L Borer

Birmingham , United KingdomUnited Kingdom dealership location
18426 km
ready for operation (used)
Kearns & Richards SF125L Horizontal Borer with Heidenhain TNC 131 Nnkgh Control in 3 axes. 50 ISO Taper, Spindle: 125mm, X axis: 1.6m, Y axis: 1.5m, W axis: 1.8m, Z axis (spindle) 750mm from facing slide, Facing Head Dia: 820mm, Facing slide travel: 190mm, Table size: 1.2m sq. Angular increments: 1º optical eye. 8 tonne loading capacity. Spindle speed 0 – 1120 rpm on 30 HP motor. Complete with Universal Milling attachment & tooling. more
3

Gear ZF Getriebe 12 AS 2330 TD / 12AS2330TD Iveco Stralis

Emmerich, GermanyGermany dealership location
18056 km
ready for operation (used)
Transmission ZF 12 AS 2330 TD, for IVECO Stralis, condition for the closing of the purchase is a business---business activity of the buyer and their corresponding proof. Please send us proof of your business--business activity (e.g. VAT identification number, business license or association or chamber card) after the completion of the purchase process. Shipping is only made after proof of business--to-business activity. Sales and delivery are carried out solely on the basis of our terms and cond... more
5
Commission 44574-52 Capacity 4000 kg Type of drive LPG Mast type standard Lifting height 4000 mm B9l23d9u Height 2855 mm Free stroke 150 mm Forks 1200 mm technically very good visually very good Bereifung_vorne 27 x 10 x 12 SE Rear tyres 200 x 50 x 10 SE Optional 3rd valve, 4 valve, rear work lights, Worklights front heater, full cabin Attachments: thrust fork, fork positioner more
4

Injection moulding 201 - 300 ton. BATTENFELD BA 2700/1200BK

Cerreto D'Esi, ItalyItaly dealership location
17814 km
1998
ready for operation (used)
Tonnage:270 Clearence between tie-bars:630X630 Bfafc0xgid Screw diameter:55 Min/Max mould thickness: 250-620 Core pull: 2 Mov. plasten stroke: 550 Inverter: 1 Air ejection: 1 more
2
Make Winkel Schweisstechnik GmbH (DE), Type Stripper filter, No WS-5162, New 2012, Capacity 45 m3/h, Max temperature -10/170 degr.C, Pressure -1/6 Bar, Content 34 Ltr, Filter surface 0,45 m2, Number of bags 1, Mounted on legs , Floorspace 0,4x0,4 M, Total height 1,4 M, Weight 100 KG What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines in ... more
1

AUTOMATION SYSTEM CEFLA TRC 2000 / 125 FB / 1600

Pollenzo, ItalyItaly dealership location
18217 km
ready for operation (used)
Subfamily: Transfer maximum length of the panels: 2500 mm maximum width of the Panel: 1600 mm excavation of the Panel: Yes  with: motorized roller conveyor safety standards CE mark: Yes  B2fylajs more
6
Lifting height: ca. 1800 mm lifting capacity in kg: 5400 kg dist. between pillars (laterally): 3200 mm track width: 960 mm weight of the machine ca.: auf Anfrage t space requirements of the machine approx.: L:8,0xB:4,0xH:2,0 m Hydraulic Jack - With Alignment - applicable for vehicle repairs! - 4 column lifting platform is equipped with support arm locking for security and a axle measuring equipment system. The lifting system is based on a hidraulic drive with wire guidance. - width of rails is 2... more
2
Vehicle - Make: Kalmar - Type: DCF200-12LB - Full Free Stroke - Freelift - Drive type: Diesel - Load capacity: 20000kg - Load center: 1200 - Lifting height: 6200 mm - Reach: 0 mm - Built: 2012 - Engine hours: 686 - Internal No:: 2962a _____ Mast data - Mast type: Duplex - Lifting height: 6200 mm - Height: 4900 mm - Free stroke: 3180 mm - Fork carrier: 2950 mm - Forks: 2500 x 250 x 100 mm _____... more
6

Injection moulding machine Battenfeld BA600/125 CDC

Bydgoszcz, PolandPoland
17279 km
1996
ready for operation (used)
Battenfeld BA600/125 CDC Year: 1996 Control unit: Unilog 4000B Screw diameter: 30 mm Injection pressure: 1492 bar Injection volume: 84,4 cm3 Shot capacity: 77,1 g Clamping force: 600 kN Platen size: 490 x 490 mm Distance between tie bars: 320 x 320 mm Mould height(min.): 150 mm Be9oraxmen Opening storke: 425 mm Max. daylight: 575 mm Ejector stroke: 150 mm Weight: 3250 kg Additionally: Robot Picker more
10

Injection moulding 51 - 100 ton. BATTENFELD VERTICAL R 750/125V

Cerreto D'Esi, ItalyItaly dealership location
17814 km
2004
ready for operation (used)
Tonnage:75 Screw diameter:30 Calculated shot volume:84,4 Cm3 Robot connection Euromap-12:Yes Core pull: 1 Euromap: Bfaexgzk03 750/125 Mov. plasten stroke: 250 Air ejection: 1 more
11
Lifting table H 1.25 m Used goods, good condition, see pictures Manufacturer Demag Length 158 cm Width 106 cm Maximum height 125 cm Lifting capacity 500 kg Besbscjpvb Negotiation price: € 1,200,-- net from stock Goods are in stock. Transport and assembly possible on request. Visit possible at any time by appointment. More information on request. Constantly over 5000 lfm pallet racks in stock by numerous manufacturers. (changes and errors in the technical data, in... more
6

Other Böllhoff Membranenpumpe 001-200-DP

Petershagen, GermanyGermany dealership location
17864 km
2009
used
Manufacturer: Böllhoff Membranenpumpe, Type: 001-200-DP, Year: 2009, FREITEXT1: Födervolumen 125 L/min, FREITEXT2: 8 Bar, FREITEXT3: Temperatur max 80 Grad, FREITEXT4: Übersetzungsverhältnis 1:1, FREITEXT5: geprüft ausgeliefert, Year :2009 Q8xycgheq more
2
Make Winkel Schweisstechnik GmbH, Type W-KF-12-40"-DOE, No WS-5167, New 2012, Material Stainless steel 1.4571 (316Ti), Candle filter , Stoomwezen tuv, Filter surface 2,4 m2, Number of candles 12, Candle sizes lengte 40", Liquid outlet DN40, Max. temperature -10/140 [...] Top connections DN50, Capacity 110 Ltr, Vessel sizes dia.330mm x1340mm, Working pressure vac./6 bar, Test pressure 9 bar, Mounted on legs , Floorspace 0,7x0,7 M, Total height 2,05 M, Weight 180 KG, Extra Specifications No filter... more
2
Edge phas machine Manufacturer: Assfalg Type: HKF 120 Technical data: Engine power 600 W Revolutions infinitely variable 8000-24000 rpm Connection 220 V Ccssdn9 50/60 Hz Collet diameter 6 or 8 mm Prism 120 mm Machine dimensions 350mm L, 120 mm W, 160 mm H Weight 5 kg Uses: precise edge breakage Steel 0.1 - 1.5 mm Light and waistband metals 4 mm Use of commercially available carbide cutters Equipped with tools more
6
Injection moulding machine Krauss Maffei 1600/12000MX classix Built: 2017 - 2 plates machine with 4 pressure pads and 4 locks - PV control spray unit Be7tsrepwt - MC6 control - Plastic size 12000 - Screw 120 diameter - 2x air valve - 6 cascades control - Hydraulic ejector - Injection embossing circuit - 4x Hydraulic core pull with pressure relief function - 10 compartment water battery - Temperature control devices interface - Euromap 64 - Start-up circuit - Quality monitoring p... more
6
Three-phase transformer, transformer, Travo ([...] Elektrotechnik GmbH, 77652 Offenburg, Germany) DLGX type 1250F-0913T04001 Fabr. No. 144050 year 2009 Qmglira7 Power of 1250 kVA Primary voltage 480 volt (input) Secondary voltage 480 volt (output) Secondary output power 1500 amp Frequency 50/60 Hz -Monitoring of temperature 135° / 160 ° C. Dimensions L x W x H 1600 x 850 x 1470 mm Weight 3150 kg good condition The transformer comes from a test pilot plant. more
7
120 lfm pallet rack SLP Special items, new goods, see pictures! Completely new shelving system from a large German manufacturer. Height 4 m Depth 110 cm Beam length 2.5 m Load/compartment 1650 kg Negotiation price: € 8,140,-- net from stock Offer consists of: + 47 pcs frame pre-assembled, 9t field load, depth 110 cm, height 4 m + 276 pcs. carrier, length 2.5 m, 1650 kg load/compartment + 552 pcs. Mount fuses + 94 pcs. concrete anchors + Load sign... more
10
Folding machine Eurofold 121-235 feeding from a high pile (elevator) The machine is 100% operational as new. 230V power supply. Format: 350 × 550. Smooth speed control. Becker compressor – increased to higher paper weights. Two pockets, with cross function, two end caps, all standard folds (Z, C, Half, Four) Possibility of perforating, creasing and cutting. Rogodqza Compact design, machine on a table with wheels. Counter Included in the set manual, rollers for creasing, additional equ... more
2
Make Winkel Schweisstechnik GmbH, Type W-KF-12-40"-DOE, No WS-5166, New 2012, Material Stainless steel 1.4571 (316Ti), Candle filter , Stoomwezen tuv, Filter surface 2,4 m2, Number of candles 12, Candle sizes 40", Liquid outlet DN40, Max. temperature -10/140 [...] Top connections DN50, Capacity 110 Ltr, Vessel sizes dia.330mm x1340mm, Working pressure vac./6 bar, Test pressure 9 bar, Mounted on legs , Floorspace 0,7x0,7M, Total height 2,05 M, Weight 180 KG, Extra Specifications (no filters) What... more
5
Re-air suction system, mobile duster HOLZKRAFT RLA 125 Very good condition, as new, almost without signs of use Very robust and durable Built: 2004 For dust and late suction on woodworking machines and similar machines (e.g. circular saws, grinders, milling, hobbles) For industry and crafts Also for flammable dusts, construction B1 With a large filter surface With test certificate H3 of the Holz-BG EX-protected With BG-GS and CE seal of approval Nominal volume current: 1095 cbm/h ... more
6

daylight press KIRCHFELD RP 120

Rietberg, GermanyGermany dealership location
17929 km
1982
ready for operation (used)
machine daylight press manufacturer KIRCHFELD type RP 120 0mw7dgs part Id-no. 2239939 year of construction 1982 ... more
2
Revolver head for GuildMaster CTX 210 C3 Yr3jms more
9
Technical details turning diameter 580 mm turning length 915 mm control Siemens 840 D swing over bed 580 mm swing diameter over slide rest 410 mm x-travel 450 mm z-travel 915 mm y-axis +100 / -50 mm c-axis 0,001° deg. spindle bore 97 mm spindle head DIN55026 A8 spindle turning speed - stepless 12,6 - 4000 U/min max. torque on the spindle 1000 Nm transmission ratio 2 max. workpiece weight -without tailstock 300 kg rapid travel - longitudinal/face 15 m/min tailstock quill diameter... more
7
No° 04098 movable dust extraction SCHUKO VACOMAT 12/14 used, very good condition, year of constr. 2006 GS-checked, residual dust content 2, until 0,2 mg/m3 usable for suction of burning dust Vnominal: 1400 cbm/h Bdhxton9f7 Vmin: 1100 cbm/h 400 Volt / 2,2 kW suction socket 140 mm negative pressure 2140 Pa filter area 7m² manual filter cleaning with filter sensor complete with electrical control and connection cable transport dimensions 1400x900x2200 mm LWH approx.. 300 k... more
2
Make Seitz Werke Bad Kreuznach, Type EF60/120CW, [...] 5127, Material Stainless steel 1.4401 (316), Nutsche filter /Pressure filter (1x), Filter surface 0,28 M2, Capacity 120 Ltr, Vessel sizes dia. 600x400mm, Top connections dia. 200mm, Working pressure 6 bar, With jacket (12 Ltr), Working pressure 6 bar, Max. temperature 165 Degr. C., New 1964, Mounted on frame , Mounted on wheels , Floorspace 1,1x1,0 M, Total height 1,7 M What you can expect from Foeth: all our machines are in working conditio... more
11
1 x Xerox 4127 EPS included: - Fiery EX4112/4127 - Finisher LGW-1 + LCS-1 - Paperdeck PCF-1 Counter readings: Total: Approx. 6,429,096 pages Consumables: Beq0ol9crz Drum Unit BK: 70 % toner BK: 16% Manufacturer information: Whether invoice or brochure - your partner for printing! With every job you print on the Xerox 4127 EPS, you can expand your business and offer your customers even more. The systems are particularly suitable for all high-volume print jobs as they of... more
3
cleaned, function tested, test run Beawg8h0vt Review, attitude, Partial overhaul by factory mechanic new sliding coating new battery (control) 1 piece combi unit with electronic shoe - lacquer finish used, top condition manufactured by Bütfering type Classic 111 E sanding width ca.1100 mm number of belts/aggregates 1 piece belts from top 1 piece 1 piece combined aggregate with electronic joint pad 11 kW Shoe division ca. 25 mm belt speed ca. 4,5 / 9 / 18 m/s steel roller smooth lacquer san... more
1

CNC laser cutting system DNE Member of Bystronic 1012 ecoline 500W

Schweinfurt, GermanyGermany dealership location
17896 km
2016
as good as new (ex-display)
DNE 1012 ecoline fiber laser 3taqfm7rc Laser source: IPG 500 watt Laser cutting head: DNE, full CNC focus = ᐳ vollautomtische position focusing on selected material! = ᐳ no mechanical adjustment of the focus! Faster on average! Cutting performance aluminum up to 1.5 mm. Cutting performance stainless steel up to 2.5 (N2) mm! Cutting performance stainless steel up to 6 (O2) mm! Cutting capacities steel up to 8 mm! Power consumption: 9 kW (lasers & machine) Section (Lxw): 1000 x ... more
4
BATTENFELD BA 400/125 CDC built: 1997 Injection unit: screw diameter: 30 mm Shot weight: 77.1 g Injection pressure: 1492 bar Dosing volume: 84.4 ccm Clamping unit: clamping force: 40 t Tie bar distance: 270 x 270 mm Size of the clamping plates: 440 x 440 mm Ejector: hydraulic clamping unit: hydraulic control: UNILOG 2050 Additional equipment: Injection unit cured - bi Dimensions: Weight: 2850 kg Length/width/height: 3.30 x 1.27 x 1.80 m Drive: Cdr9m77g Pump/motor: 7.5 kW h... more
2
Make Seitz, Type EF60/120 CW, [...] 6667, Material Stainless steel 1.4401 (316), Nutsche filter /Pressure filter (1x), Filter surface 0,28 m2, Capacity 120 Ltr, Vessel sizes dia. 565x450mm, Platen sizes dia. 575mm, Vessel can be tilted , Working pressure 6 bar, With jacket (12 Ltr), Working pressure 6 bar, Max. temperature 165 Degr. C., New 1966, Mounted on frame , Mounted on wheels , Floorspace 1,3x1,1 M, Total height 2,1 M, Weight 420 KG What you can expect from Foeth: all our machines are in ... more
3
JW FRÖHLICH GWZ 24/120 1989 Ihi0est more
5
Profile steel knife, shear tool, cutting tool, cut-off tool, die, die, stamping die, stamping-stamps -only a tool available (counter tool is missing) Shearing tool for U-steel 120 mm Type 441215124901 Glojblzi3 -1 x dimensions 215/205/H30 mm Weight 9 kg more
1

CNC laser cutting system DNE Member of Bystronic 1012 ecoline 1000W

Schweinfurt, GermanyGermany dealership location
17896 km
2016
as good as new (ex-display)
DNE 1012 ecoline fiber laser Laser source: IPG 1000 watts Laser cutting head: DNE, full CNC focus = ᐳ vollautomtische position focusing on selected material! = ᐳ no mechanical adjustment of the focus! Faster on average! Mrd7d Cutting capacity ca: Aluminium up to 2.5 mm. Stainless steel (N2) 4 mm! Stainless steel up to 8 (O2) mm! Steel up to 10 mm. Power consumption: 9 kW (lasers & machine) Section (Lxw): 1000 x 1200 mm Max cutting speed: 20 m / min Maximum travel speed: up ... more
6
Table circular saw from a training workshop Manufacturer Ulmia Qk9tvy82 Type 1612 Saw blade swivelling up to 45 degrees Long hole milling device on the side Support table for long hole available, but not mounted. Very good condition more


deutz f 12...
daily

New machines via email!

Stay updated!

to

to

Edit search
DEUTZ F 12 L 413
SELL IMMEDIATELY
with the world-wide market leader from 0,79 EUR per listing.
Find out more


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our app for used machines now!
Machineseeker app for iPhone and Android.