Used Brückner Stenter Frame for sale (8,598)

Year of construction: 1991, condition: good (used), Bruckner stenter frame Year of manufacture: 1991 Working width: 2400 mm Infeed: from batching Weft straightener Coating: above roller or fabric above Knife coating Dryer: Short infeed, suitable for coating Needle chain 6 fields Gas-heated At the exit: squeezing padder Cylinder cooling Output: batching winding, non-stop system Dodpfx Abjzam Awj Tjkp USED INDUSTRIAL COOLING SYSTEM FOR COOLING ROLLS Manufacturer: CIAT Model: LGN 150V R410A Year: 2010 Refrigerant: R410A Power supply: 3 × 400 V / 50 Hz Installed power: approx. 10 kW Cooling capacity: approx. 150 kW Suitable for: Cooling rolls Textile coating lines Calenders Laminating lines Plastic and rubber processing lines

Condition: ready for operation (used), Year of construction: 1986, A Brückner stenter frame, perfectly suited as a spare parts dispenser, is available. Steam pressure: 2 bar, air pressure: 10 bar. On-site inspection is possible. Djdpfx Abewhy S Ns Tokp

Condition: ready for operation (used), Year of construction: 2013, Nominal width: 3000mm, Working width range: 600mm-2800mm, Layers: 1, Number of chambers: 6, Heating system: Gas, Air supply: top/bottom, Max. working speed: 100m/min, Chain arrangement: horizontal, Cooling cylinders: 2, Padder: twin cylinder Matex 6000, Exhaust fan: 1, Documentation available, On site inspection is possible. Dkedpeyhqb Tefx Ab Tep

Condition: good (used), live center, live center point, live Morse taper, live center point, live lathe center, center point, centering taper Dodpfx Aorlpn Aob Tskp -Manufacturer: Bruckner, live centering tip, centering cone Type: unfortunately without a type designation -Recording: MK5 -Centering tip: Ø 60 mm -Dimensions: Ø 120 x 315 mm -Weight: 9.6 kg

Condition: good (used), live center, live center, live morse taper, live center, live lathe center, live center, centering cone -Manufacturer: Haack / Bruckner / Röhm, rotating centering points 3 pieces -Type: Röhm 114H MK6 / 2x without type designation -Recording: MK6 -Price/Delivery: complete Djdpfxjwvgwhj Ab Tjkp -Transport dimensions: 390/360/H120 mm -Total weight: 33.1 kg

Condition: used, revolving center, revolving center point, revolving Morse taper, revolving center point, revolving lathe center, center point, centering taper -Manufacturer: Bruckner, rotating center point centering cone -Type: unfortunately without type designation -Recording: MK4 -Centering tip: Ø mm Dkodpfx Aorp Ildjb Tsp -Dimensions: Ø 58 x 203 mm -Weight: 1.6 kg

Condition: good (used), live center, live center, live morse taper, live center, live lathe center, live center, centering cone Djdpfxsv T T Ipo Ab Tokp -Manufacturer: Bruckner, rotating centering point centering cone -Type: unfortunately without type designation -Recording: MK5 -Centering tip: Ø mm -Dimensions: Ø 95 x 295 mm -Weight: 6 kg

Condition: good (used), live center, live center, live morse taper, live center, live lathe center, live center, centering cone Dkjdpev T T Rwsfx Ab Tsp -Manufacturer: Bruckner, rotating centering point centering cone 3 pieces -Type: unfortunately without type designation -Recording: MK4 -Dimensions: Ø 60 x 200 mm -Transport dimensions: 200/185/H65 mm -Total weight: 5.7 kg

Condition: good (used), live center, live center, live morse taper, live center, live lathe center, live center, centering cone -Manufacturer: Bruckner, rotating centering point centering cone 3 pieces -Type: unfortunately without type designation Dodpov T T S Uofx Ab Tskp -Recording: MK3 -Dimensions: see photos -Transport dimensions: 180/16/H60 mm -Total weight: 3.0 kg

Condition: like new (used), Rolling Center Punch with Interchangeable Inserts Dkodpowc Nyxjfx Ab Top Bruckner SE 5487 MK 4 Stock Number (28605) 1 Center Punch Type 487 B 1 Center Punch Type 487 C 1 Inner Taper Type 487 D As New Condition

Condition: good (used), Flange / Intermediate flange / Mounting for faceplates Dedey U Ug Uspfx Ab Tjkp for direct mounting on the spindle Bruckner Art. 63.333

Condition: excellent (used), -KOM 3082- Here, a live center from the manufacturer Bruckner is being offered. This center does not conform to any standard specifications. Technical data: Minimum diameter: approx. 84 mm Djdpoww Umtofx Ab Tokp Maximum diameter: approx. 90 mm Shank length: approx. 248 mm Weight: approx. 40 kg

Condition: used, Mounting cone: MK 6 Core tip angle: 90 ° Load: 3000 daN Dkededhwy Tepfx Ab Top max.workpiece weight: 6000 daN Weight: 16,9 kg

Condition: used, Retainer metric 80 Core tip angle: 60 ° Total length: 380 mm Dodpfx Aodhwzweb Tjkp Weight: 18 kg

Condition: ready for operation (used), Mounting cone: MK 6 Core tip angle: 90 ° Load: 3000 daN Dksdpfx Aeg Ewiwjb Top max.workpiece weight: 6000 daN Weight: 17 kg

Year of construction: 2003, condition: used, frame hydraulic press WEGOMA Workspace: width 3600 mm height 2500 mm Dsdpscmat Uefx Ab Tokp the amount of lateral hydraulic cylinders 3 pieces top two pieces beam mechanically Move Mechanical compression setting more photos an questions

Year of construction: 1992, condition: ready for operation (used), Working width: 1200-2350mm, with Coating Machine JAKOB WEIß, six 1500kWh burner, was overhauled in 2007. Djdogny Ugepfx Ab Tokp

Condition: good (used), Code: 0422 Brand: VILMAR Model: 970 Hydraulic press for moulds, frames, furniture elements, solid wood doors, plastic materials, composite materials and various Work surface dimensions mm 970 x 500 Djdpfx Abjzkqk Ej Tskp Opening mm 350 N° 3 pistons Hydraulic power unit Overall dimensions mm 1630 x 1300 x 2100 h Machine to be reconditioned

Condition: used, HESS HYDRO frame press – used Manually hydraulically operated, Hydraulic cylinders arranged horizontally, Hydraulic cylinders arranged vertically ----- Technical data ----- Press width: 4,000 mm, Press height: 2,550 mm, Cylinder stroke: 150 mm, Dsdpfszkkdljx Ab Tjkp Motor: 1.1 kW

Condition: new, Steel Frame Automatic Nailing Bridge A fully automatic nailing station for nailing or stapling sheet materials in accordance with the design specifications including the following functions: ​ 1. Nailing or stapling of sheeting 2. Routing of openings or overhangs 3. Application of breather membrane 4. Nailing or stapling of battens ​ Specification Full PC control with 17” touch screen Interactive display of operation being performed Automatic download from drawing software. Heavy duty tables with one fixed side and one moving side 90 degree squaring corner blocks with pneumatic retraction to enable panel to move to next position when finished 1300mm minimum panel height Maximum panel height up to 3.5m (optionally extendable) Maximum panel length 6m – optionally up to 13m 400mm wide heavy duty work tables 825mm working height 300mm maximum panel thickness (optionally 5000mm) Motorised table opening with automatic brake locking Djdpedzc Rxofx Ab Tjkp Bridge mounted with one nailing / stapling tool mounting as standard. (Options for 2 or 3 nailing tool mounts) Full integration with major software packages including Sema, Dietrich;s, HsbSoft, CADWORKS, Gang Nail & Mitek. Batten application system with guide to ensure they battens are kept straight before nailing including batten storage area Pneumatic lifting rollers to assist the manually transporting of the finished panel to next position. Optional electrically driven sheet feeding system, including automatic sheet feeding and height indexing of the support table. Optional router unit with 4kw motor - servo drive controlled Optional Equipment ​ Table with rails mounted for bridge Additional price per meter for table with rails mounted Independent rails to travel 8m over one 6m capacity table (16m of rail in total) Additional price per meter of rail Working table for holding panel 6m (no rails mounted) Additional price per meter for table Motorised chains rather than manual rollers - initial cost Price per meter for motorisation Baton positioning guiding arrangement Additional tool mount Paper roll clamp, holder and software Electric paper cutting Panel thickness of 500mm Saw blade in X, Y, Z & C axes 350mm max panel thickness Saw blade in X, Y, Z & C axis 500mm max panel thickness. Inclination of the sawblade to one fixed angle Router complete with frequency inverter, mounted on the bridge for routing out openings in the panels. Complete with software controls and dust extraction.

Condition: new, A self assembly heavy duty modular timber frame table suitable for framing and boarding of panels. The modular 2m or 3m x 1m tables can be assembled in various configurations, to suit either wall panels or floor cassettes. Dkedpfxjn Up R Ie Ab Tep 4 off 2m / 3m x 1m Modular tables suitable for frames up to 4m / 6m x 2.8m PLY top with channel for fitting (optional) pop up rollers Complete with: 1 fixed infill for spacing the table to 2.8m capacity 1 sliding infill for supporting subcomponents inside the panel. 9m of fixed fence (6m length x 3m width) Working Height 700 - 850mm

Condition: new, A simple range of scissor type lifts for attaching to a crane hoist for the lifting of panels using (customer supplied) crane. 1 tonne capacity Minimum wall panel height 2000mm Maximum wall panel height 3500mm Dodpfxsfqmtkj Ab Tjkp One man operation Weight of unit 80kgs

Condition: new, A complete working station for the production of timber frame walls including the following functions 1. Framing of the wall 2. Application of cladding 3. Nailing or stapling of cladding 4. Drilling and Routing of openings and overhangs 5. Application of breather paper 6. Nailing of battens 7. Gluing of sheeting material to frames Specification Full PC control with 2 off 19” touch screens Interactive display of framing for panel assembly Automatic download from drawing software Heavy duty tables with one fixed side and one moving side 90 degree squaring corner blocks with pneumatic retraction to enable panel to move to next position when finished 1500mm minimum panel height Maximum panel height 6m Maximum panel length 20m Dedpfob Tmrvex Ab Tskp 825mm working height 500mm maximum frame height Motorised table opening with automatic brake locking Independent retractable clamping system, for the complete access of nail guns along top and bottom rails, to enable square and accurate clamping of the panel Framing tools driven to the required position via a servo drive motor, with heights controlled by software Bridge mounted with nailing / stapling tool as standard. Options for other tools to be mounted Full integration with major software packages including Sema, Dietrich;s, HsbSoft, CADWORKS, Gang Nail, DDS, Mitek.& Inventor Batten application system with guide to ensure they battens are kept straight before nailing including batten storage area Selection of multiple nail positions in both automatic and manual modes Pneumatic lifting rollers to assist the manually transporting of the finished panel to next position. Optional stud/sheeting carriage enabling studs to remain adjacent to the operator whilst assembling the frame.

Condition: new, Lifting /Turnover ("Butterfly") Device for raising panels from horizontal to vertical position or for turning over of panels to enable the fitting of insulation, or the nailing on both faces of a panel. A pair of hydraulically operated tables (also known as a butterfly table) that enable the panels to be brought to the vertical position, passed to the 2nd table, and safely lowered back down on the opposite side for fitting of insulation and closing of the panel. There is an option to have pneumatically operated pop up idle roller tracks fitted in the table, for easy loading and unloading the panels. Dkedpsdzc Rfofx Ab Tjp The hydraulic lifting of the tables is controlled by push button operation 3,5kw motor 6m standard length (optional 12m) 4m maximum panel height Optional side and end stops for floor cassette assembly

Condition: used, Year of construction: 1987, No. 3186 Frame saw / gang saw MÜLLER VGU / 4/71 Used, year of construction 1987 Passage 710 mm Drive motor 75 kW Hydraulic belt tensioning Manual width adjustment Dksdpjvcqansfx Ab Tjp Including hydraulic clamping carriage, riving knife, gauges for width adjustment, electrical control cabinet, various saw blades Sale on behalf of customer, ex location near 47051 Duisburg, without dismantling, without transport and assembly Errors in description and price excepted Dismantling, transport and loading by us optionally possible In order to avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location