Used Atmospheric Plasma Processor for sale (993)

Year of construction: 2020, condition: ready for operation (used), Treatment width: 8mm-12mm, max. plasma generator diameter: 32mm, plasma generator length: 210mm, cable length: 3m, inlet pressure: 5bar-8bar, gas consumption: approx. 2m³/h, generator power: 300W, frequency: approx. 40kHz, dimensions X/Y/Z: approx. 420mm/140mm/500mm, control: manual/semi-automatic, operating hours: 81h. Documentation available. On-site inspection is possible. Kodpfxet I Tydo Ahbenc

Condition: used, Tepla   Tepla 400 SC Ksdjzh Drqjpfx Ahbsnc   230 Volt, 13A, 50/60Hz   Pressure: 4-6 bar   Scope of delivery: (See images)   We will gladly answer any further questions you may have over the phone.   Written orders can be placed via email or fax.

Condition: used, Year of construction: 2011, functionality: fully functional, For sale: 4 temperature control units by Plasma: Medium: water Temperature: max. 90°C Heating capacity: 9 kW Cooling capacity: 30 kW Alarm function Flow measurement Automatic water change function PT 100 sensor Knodpfxjx Ek Rdj Ahbsc Interface for TTY 20 mA via 9-pin D-Sub connector

Year of construction: 2007, condition: used, Supply voltage: 1~ 230V AC, rated current: 16A, mains frequency: 50Hz, connected load: 0.64kA, CE marking. On-site inspection is possible. Knodpfxsz R Uwve Ahbec

Condition: used, functionality: fully functional, Year of construction: 2007, The temperature control unit from Plasma/Single is for sale; there are 2 units available for sale, and the price is per unit! Medium: Oil Knsdpfx Ahezul N Rebjc Maximum operating temperature: 180°C Heating capacity: 6 kW Cooling capacity: 14 kW External cooling fan... PT 100 sensor Interface 0-20 mA

Condition: good (used), Year of construction: 2017, V304 plate processing machine (including 1 gantry beam(s) of 6.500mm and side trucks) ◼ This V304 plate processing machine is capable of processing plates up to 3.050mm x 18.000mm for bevel plasma cutting and marking (needle marker, if attached) and 4.100 x 18.000 mm for oxy-fuel cutting and marking (needle marker, if attached) ◼ X-rail (21.000mm on both sides of the machine, including double linear guides, helical rack and pinion system and rubber covering band) ◼ Plasma cutting and extraction table (4.300mm x 18.720mm, 2 channel(s), 1 pcs, suitable for ≥ 350A cutting) ◼ Position 1: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Driven suspension (1 pcs, servo motor driven, including laser pointer) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 2: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 3: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 4: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 5: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Cables high instead of low ◼ Donaldson fume extraction unit DFO 4-48 - 200L (incl. frequency controller) Kedjvpalaopfx Ahbenc ◼ Air conditioning for switch panel (up to an ambient air temperature of 55°C) ◼ Hardware and software (includes VACAM ‘Machine Edition’, VACAM ‘Office Edition’, VACAD editor software module, VANEST nesting software, Layout marking software module, online support) ◼ Post processor for SigmaNEST (SigmaNEST is provided by the customer) ◼ Safety devices (safety bumpers, emergency stop cord)

Year of construction: 2012, condition: used, functionality: fully functional, The temperature control unit from Plasma, model "Primus", is available for sale with the following technical specifications: Medium: water, Maximum temperature: 150°C, Heating capacity: 9 kW, Cooling capacity: 30 kW, Special equipment: reinforced pump K6 at 60 l/min up to max. 6 bar. The pressure booster pump is used to increase the cooling water pressure during filling; this is necessary if the system pressure is higher than the cooling water pressure. PT 100 sensor. Interface: On/Off, Alarm, PT 100, Temperature monitoring. Knodpfxex Eg T Es Ahboc

Condition: used, Year of construction: 2017, functionality: fully functional, input voltage: 400 V, input current: 16 A, total width: 1,400 mm, total length: 1,500 mm, machine base height: 1,400 mm, overall weight: 350 kg, Hello, I am offering a used Corona / Plasma treatment system for sale. The material to be treated is placed on a conveyor belt. Sensors automatically activate the plasma / corona discharge when the substrate is positioned beneath the head. The feed speed is adjustable. The conveyor belt has a width of 650 mm. The system is mounted on casters, making it mobile. An exhaust fan is also installed and only the exhaust air needs to be ducted outside. This system is ideal for treating the surfaces of plastic materials or glass to improve printability. It is also suitable for the pretreatment of materials to enhance adhesion for bonding. If you have any questions, please feel free to contact me. Knodpfxoy A Trlj Ahbjc

Condition: repair required (used), functionality: not functional, Year of construction: 2007, operating hours: 134,409 h, machine/vehicle number: A0270A0124, control type: CNC control, laser type: CO₂ laser, laser source manufacturer: Siemens, laser hours: 51,652 h, laser power: 6,000 W, sheet thickness (max.): 25 mm, year of last overhaul: 2023, Equipment: documentation/manual, TRUMPF TRULASER 5060 CO₂ Laser Cutting Machine – 6000 W TRUMPF TRULASER 5060 – 6000W CO₂ Laser – Year 2007 – To be recommissioned Brand: TRUMPF Model: TRULASER 5060 (CO₂ Laser) Laser power: 6000 W CNC control: Siemens Serial number: A0270A0124 Year of manufacture: 2007 Technical specifications Knodpfx Ahjztb Elobsc • Beam operating hours / cutting time: 134,409 h • Laser operating hours under power: 51,652 h • Maximum steel thickness: 25 mm • Dimensions: 10,300 x 3,820 x 2,550 mm • Weight: 16,500 kg Standard equipment: - TruFlow 6000 W resonator - HI-LAS high-pressure cutting - Cutting heads with 7.5’ and 10’ lenses - Quick-change cutting head device - Automatic sheet edge detection - Capacitive profile follower and APC process control - Positioning laser diode - Programmable cutting gas pressure - Programmable power cycle - Oil vaporization device - PCS (Process Control System) - Plasma line and LLS (laser power control) - Sprint Line - Contourline - Modem and remote diagnostics - Focus Line - Laser logbook - Automatic pallet changer - Work area lighting - Automatic nozzle cleaning - Conveyor for small parts and scrap - Multiple suction box - Suction device and dust collector - Automatic stop - TFT color screen - 3.5’ floppy disk drive - TruTops laser lite - RJ 45 network card - Safety device Including: air cutting, 3.5’ laser head with high speed, Load Master preparation, additional post-processor Machine condition The machine was in operation until 2023. The laser source and optical path maintenance have been regularly performed by TRUMPF. Technical inspections and preventive maintenance operations have also been carried out annually by the manufacturer. The machine is currently shut down and requires repairs before recommissioning, including pipe replacement. A detailed quote for the repairs and parts to be replaced has been prepared by TRUMPF and can be provided to serious buyers. The overall condition of the equipment requires, at a minimum, the acquisition of the spare parts mentioned in the manufacturer’s offer in order to restore satisfactory production conditions. Sales conditions • Immediate availability • Sold as is • Disassembly, loading, and transport are the responsibility of the buyer • Documentation and repair quote available upon request This machine represents an excellent opportunity for a company with the necessary technical skills to restore it or seeking a machine base for spare parts. For any further information or to arrange a visit, please contact us.

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, operating hours: 966 h, MAZAK OPTIPLEX NEXUS 3015 FIBER - 4 kW CNC Fiber Laser Cutting Machine Price: EUR 190,000 net Condition: Used – VERY LOW OPERATING HOURS Resonator: IPG YLS-4000 U VERY LOW WORKING HOURS The machine has exceptionally low operating hours. The IPG resonator and critical components are in near-factory condition: - Practically full remaining lifespan of the IPG resonator (rated for up to 100,000 h) - Minimal wear on the optical system, Multi-Control Torch 2.1 head, and linear guideways - Cutting quality and precision comparable to a new machine - Operating hours confirmed by CNC readout – documentation available upon request or during inspection TECHNICAL SPECIFICATIONS Model: Optiplex Nexus 3015 Fiber Laser Type: Ytterbium fiber laser Resonator: IPG YLS-4000 U Laser Power: 4.0 kW Max. Sheet Size: 1,525 x 3,050 mm Max. Pallet Load: 930 kg Travel (X/Y/Z): 3,100 / 1,580 / 150 mm Rapid Traverse (X/Y): 60 m/min (85 m/min combined) Drive X1/X2/Y: Rack & pinion, direct-drive Drive Z: Servo, ball screw Accuracy X/Y: ±0.05 mm / 500 mm Repeatability: ±0.03 mm Head: Multi-Control Torch 2.1, F125-F200 mm Assist Gases: O2, air, third gas; 0.02–2.5 MPa CNC: Mazatrol Preview G, 19" touchscreen Pallet Changer: Automated, 2-pallet Weight: Approx. 12,850 kg Power: 380–480 V, max. 18 kW CUTTING CAPACITY (4 kW) Mild steel O2: 20 mm Mild steel N2: 4 mm Stainless steel N2: 15 mm Aluminum N2: 15 mm Copper O2: 8 mm Brass N2: 8 mm INTELLIGENT FUNCTIONS (INCLUDED) Automatic nozzle changer (8 nozzles), auto focus positioning, focus detection, auto profiler calibration, auto nozzle cleaning, beam diameter control, pierce/plasma/burn detection, fine power ramping, flash cut. SCOPE OF DELIVERY (INCLUDED IN PRICE) Cast-iron frame (foundation-free installation), Mazatrol Preview G CNC 19", Multi-Control Torch 2.1 head with 8-position nozzle changer, OPTIPOD module, automatic 2-pallet changer, chiller with 6 m hoses, cutting nozzles 1.2/2.0/3.0 mm plus 5 adapters, laser edge detection, numerical gas pressure control, multi-tap transformer, slatted table (100 mm spacing), tools, documentation (PL/EN). OPTIONAL EQUIPMENT – NOT INCLUDED The laser system can be purchased separately for EUR 190,000. Options below are available at additional cost. OPTION A – PRESSURE-BOOSTING UNIT – EUR 15,000 net Allows cutting with compressed atmospheric air instead of expensive nitrogen, greatly reducing operating costs. Components: 1. Compressor SK 25 / max. 15 bar / SK.2-13318 2. Condensate Drain Ultramat UFM-D03 3. Economizer Ultra-Filter DF 0035 - DF 1100 4. Ultra-Filter DF 0035 - DF 1100 5. Pressure vessel, 500 l Air cutting capacity: mild steel up to 6 mm, stainless up to 4 mm. OPTION B – SHEET LOADING CRANE – EUR 5,500 net Sheet loading crane, lifting capacity up to 700 kg. Enables safe and quick loading of sheets onto the laser pallet. PRICE SUMMARY (NET, EUR) Machine only: EUR 190,000 Option A (pressure unit): EUR 15,000 Option B (loading crane): EUR 5,500 Total with both options: EUR 210,500 COMMERCIAL TERMS Knjdpfx Asy Dgxushbec - All prices are net, in EUR (VAT not included) - Offer valid for 30 days - Payment and delivery terms to be agreed - Inspection and test cutting available by appointment

Condition: used, Power connection: 20A, frequency: 60Hz, mains voltage: 120VAC, phase: single-phase. An on-site inspection is possible. Knsdez Da Rlepfx Ahbjc

Condition: used, Year of construction: 2014, operating hours: 2,000 h, functionality: fully functional, sheet thickness (max.): 38 mm, sheet thickness steel (max.): 38 mm, sheet thickness aluminum (max.): 25 mm, table length: 3,000 mm, working width: 1,500 mm, table width: 1,500 mm, working length: 3,000 mm, controller manufacturer: Hypertherm, controller model: EDGE Pro, control type: CNC control, sheet thickness stainless steel (max.): 25 mm, Equipment: cooling unit, documentation/manual, We offer this used Ermaksan ER 4000 Plasma Cutting Machine, year of construction 2014. Hypertherm HyPerformance® HPR260XD plasma source and Hypertherm EDGE® Pro CNC control. The table size is 3000x1500mm, and it uses TurboNest® CAD/CAM software. It can cut black steel up to 38mm, stainless steel, and aluminum up to 25mm. Knsdpfx Aez Sqpiehboc If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: repair required (used), Year of construction: 2010, operating hours: 7,700 h, functionality: not functional, machine/vehicle number: 15158-10, working range: 4,000 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, CNC plasma cutting system BACH ThermoCut 2000 with pipe cutting device, TEKA dust extraction system, and plasma source. Manufacturer: BACH Maschinenfabrik GmbH Type: ThermoCut 2000 Year of construction: 2010 For sale is a used CNC plasma cutting system BACH ThermoCut 2000, including pipe cutting device, plasma source, dust extraction system, and complete piping. The system was used in our machine manufacturing company until recently and is suitable for cutting sheet metal as well as processing pipes. Technical data: Working area: 4,000 x 2,000 mm Plasma source: Thermal Dynamics Ultra-Cut 100 CNC control: myBach Pipe cutting device included Pipe diameter: min. 50 mm max. 320 mm Max. cutting thickness: Mild steel: up to 12 mm Stainless steel: up to 10 mm TEKA filter and dust extraction system included Complete dust extraction piping system included CE marking available Maintenance and condition The system was regularly maintained during its entire service life. Official maintenance by the manufacturer was last performed on August 20, 2013. After that, ongoing maintenance was carried out in-house. Filters of the TEKA dust extraction system were renewed approximately 6 months ago. Cutting torch head was renewed approximately 4 years ago. Cooling water filter is changed regularly, approximately once a year. The operating hour counter of the dust extraction system currently shows approximately 7,700 hours. Since the system was operated exclusively with the dust extraction system running, this value can be used as a good indication of the total operating time of the system. Known defect The system is currently not operational. After consultation with Voortman and Mr. Sobiech from Magma Industries, the cause is likely to be in the cooling circuit of the plasma source. According to the experts, the most likely causes of the fault are: Defective cooling water pump Defective flow sensor Leakage on the suction side of the cooling water system A final fault diagnosis has not yet been carried out. Ksdpfx Aezizkyehbsnc Spare parts for the installed Thermal-Dynamics plasma source are now only available to a limited extent. The machine is therefore explicitly sold as a system requiring repair or for refurbishment. Scope of delivery BACH ThermoCut 2000 CNC system Thermal Dynamics Ultra-Cut 100 plasma source Pipe cutting device TEKA filter and dust extraction system Control panel with controller Dust extraction piping Accessories according to existing equipment Special features ✅ Pipe cutting up to Ø 320 mm ✅ Complete package including dust extraction ✅ Solid industrial machine made in Germany ✅ Easy-to-disassemble gantry design ✅ Also interesting for buyers who already have a suitable plasma source Location 24161 Altenholz, Germany Price Negotiable €21,900 Inspection possible by appointment. Sale exclusively to commercial businesses, excluding any warranty for defects. Loading / Dismantling The system is offered exclusively for self-dismantling and self-collection. The buyer assumes full responsibility for the dismantling, loading, and removal of the machine at their own cost and risk. To assist with loading, a hall crane with a maximum lifting capacity of 10 tons is available on site. Use of the crane can be arranged in advance. Due to the size and weight of the system, we recommend an inspection before submitting an offer.

Condition: like new (used), Set of 3 Industrial Vacuum Cookers – Stainless Steel Set of 3 industrial vacuum cookers made of stainless steel, designed for cooking, heating, and processing food products under controlled vacuum conditions. The set consists of three process vessels installed on a common frame with an elevated work platform, providing a robust solution for industrial batch production. Vacuum processing allows for cooking and concentration operations at reduced pressure, enabling operation at temperatures lower than those used in conventional atmospheric processes, depending on the product and recipe. MAIN FEATURES -Quantity: 3 vacuum cookers -Type: Industrial vacuum cooking/processing system -Application: Cooking, heating, and processing of food -Robust construction in stainless steel Knsdpfxjzwv Ips Ahbjc -3 independent process vessels -Configuration for batch production -Integrated piping and valve system -Vacuum processing -Bottom product discharge -Individual drive systems -Inspection/access hatches -Stainless steel work platform -Guardrails and access system -Designed for professional food processing environments -Integrable into complete production lines APPLICATION The system is designed to process food products in closed vessels under vacuum conditions. Working at reduced pressure allows the cooking and heat treatment conditions to be adapted to the characteristics of each product. The configuration of three vessels also provides high flexibility for managing different batches or production stages within the same facility. Depending on the product, it can be used for: Vacuum cooking Heating and heat treatment Concentration Mixing and homogenization Reduction of liquid products Sauce production Processing of fruits and vegetables Preparation of fillings and formulated products APPLICATIONS Especially suitable for food manufacturers, sauce and condiment producers, fruit and vegetable processors, prepared meal manufacturers, and industrial kitchens. Depending on its configuration, it can be used to produce sauces, jams, preserves, fruit preparations, vegetable products, fillings, concentrates, and prepared meals. The configuration of 3 industrial vacuum cookers offers a particularly interesting solution for facilities that require production flexibility and simultaneous processing of different batches. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, Year of construction: 2010, machine/vehicle number: VG6000 3224, Equipment: documentation/manual, Koike Versagraph 6000, including cutting tables. Excluding strips. The machine was fully functional until April 2022. Kodpfxszdz U Us Ahbsnc It has been disassembled and stored since 2022. Original new price: 450,000 euros.

Condition: used, Year of construction: 2015, functionality: fully functional, type of input current: three-phase, sheet thickness (max.): 30 mm, input voltage: 380 V, cutting speed: 6,000 mm/min, total width: 4,850 mm, total length: 10,150 mm, table length: 6,000 mm, working width: 2,000 mm, compressed air connection: 8 bar, table width: 2,000 mm, cutting current: 260 A, positioning accuracy: 0.01 mm, working length: 6,000 mm, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,000 mm, type of cooling: water, height adjustment type: electric, input frequency: 50 Hz, Equipment: documentation/manual, double-sided, For sale: used AJAN CNC plasma cutting machine with water table. The table is filled with water to a set level and cutting takes place just above the water surface. The water captures fumes and dust and cools the workpiece, so no separate filtration system is needed. The machine is compact and takes up little floor space. The gantry has dual-side servo drive. AJANCAM nesting software is included free of charge. ⭐️ Manufacturer AJAN Elektronik (Turkey) ⭐️ 1st Commissioned December 2015 ⭐️ Table size 2000 × 6000 mm ⭐️ Plasma power source AJAN HP 260A Kodpfx Ahoy Annbebsnc ⭐️ CNC control AJAN own controller ⭐️ Nesting software AJANCAM nesting software – included free of charge + free updates in future. ⭐️ Cutting currents 30 A, 80 A, 130 A, 260 A ⭐️ Max. cutting thickness quality cut up to 30 mm ⭐️ Input voltage: 380 V ⭐️ Phases: 3 ⭐️ Frequency: 50 Hz ⭐️ Torch height control automatic ⭐️ Gas control automatic ⭐️ Condition in working order ⭐️ Price 16 500 EUR + VAT ⭐️ Transport and installation 5 500 EUR + VAT (in Baltics, Finland) ⭐️ Availability immediately ⭐️ Photos, layout, attached to this post ⭐️ video on request Need more information or a formal quote? please send a e-mail or give us a call.

Condition: like new (used), Year of construction: 2025, operating hours: 30 h, functionality: fully functional, machine/vehicle number: W/S0202302027375, type of cooling: water, Equipment: documentation/manual, STAHLWERK CUT 160 P IGBT Plasma Cutter - powerful 160 amp, precise high-frequency (HF) pilot arc for first-class arc starting. The powerful STAHLWERK CUT 160 Pilot IGBT plasma cutter with 2T/4T mode and high-performance water cooling delivers a powerful 160 amps and features a precise high-frequency (HF) pilot arc for first-class arc starting. The cutting performance is up to 52 mm, depending on the material (structural steel P235 up to 52 mm, V2A or V4A up to 48 mm, aluminum up to 42 mm). In addition to common conductive metals, the plasma cutter is also suitable for coated sheets and surface rust. The cutting current can be adjusted steplessly from 20 to 160 amps. The compact unit features smart cooling and overheating protection and is easy to transport at only 38.3 kg. • Plasma / CUT - A plasma arc is generated by means of current, which melts the material, which is then removed with compressed air. This allows all conductive metals, such as standard steel, stainless steel, copper, aluminum, titanium, etc., to be cut precisely with ease. • Cutting thickness - Cutting up to 52 mm is possible, depending on the material. Structural steel P235 up to 52 mm, V2A or V4A up to 48 mm, aluminum up to 42 mm. • Pilot arc - High-frequency (HF) pilot arc for first-class arc starting. No contact with the workpiece is necessary! The pilot flame establishes the arc. This torch can be operated with a spacer, which is included. • Cutting current - Stepless adjustment from 20 to 160 A. • Airflow - After the cutting process is completed, air flows to cool the torch and reduce wear on the nozzle and electrode. • 2T/4T - determines the control of the operating mode and offers extended control over the current profile. In 2T mode, the high-frequency ignition (HF) remains active until the trigger on the torch is released. In 4T mode, the arc is ignited after the trigger is pressed and released once. After another press and release, the ignition is stopped. • Lightweight & compact design - With a weight of only 38.3 kg and dimensions of 630 x 320 x 600 mm, the unit is ideal for cutting work in any location. Innovative IGBT transistors save space and weight compared to the old MOSFET technology. No more heavy lifting, thanks to the transport rollers under the unit! • Highest efficiency & performance - Three-phase alternating current (400 V) powers the unit and allows an output power of a true 160 amps. • Smart cooling & overheating protection - State-of-the-art technology, an integrated overheating protection and a high-performance cooling system enable the maximum performance to be achieved. • Water cooling - The high-performance water cooling guarantees optimal cooling of the entire hose pack at all times. The water cooler is already included in the scope of delivery! Product details Operation of the Stahlwerk plasma cutter Power connection 400 V | 20 A Compressed air as gas Required pressure no manufacturer's specification Air flow no manufacturer's specification Cutting Knjdpfxoz Rivfe Ahboc Duty cycle at maximum 60 % Max. current for continuous cutting 32.6 A Cutting depth structural steel ST37 10 mm Cutting depth V2A and V4A stainless steel 7 mm Cutting depth aluminum 4 mm Cutting current 20 - 160 A Ignition Pilot arc Inverter IGBT Accessories Plasma torch Length 5 m Plasma nozzle Plasma electrode Ceramic cap Cutting nozzles, ceramic caps, protective clothing available as accessories.

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: M440104, input voltage: 400 V, input current: 2 A, input frequency: 50 Hz, Plasma cutting system CMS3 Plasma Wasp 300x150 cm including Viaduct software with Nitec Fiblo 4000 extraction system Inspection only by appointment! Knsdpoz A Uqqjfx Ahboc Collection only.

Condition: used, Year of construction: 2004, functionality: unexamined, We are offering this used Kjellberg FineFocus 600 plasma cutting machine, including a new torch and wear parts, manufactured in 2004. If you have any questions or require further information, please feel free to send us a message or call us. Knedpfx Aszn Hilehbec

Condition: used, Year of construction: 2016, functionality: fully functional, type of input current: three-phase, Swift-Cut CNC Plasma Cutting Machine Type 1250 with zone-controlled extraction table Technical Specifications: - Cutting area for sheet sizes up to 1250 x 1250 mm - Maximum gantry clearance height: approx. 100 mm - Lowered guide rails for easy loading - Gantry park position enables easy loading of full sheets from above - Robust welded steel frame with polyester powder coating - Lightweight cutting head for high cutting performance and easy maintenance - Linear guides with smooth-running V-rollers - Powerful 4 Nm stepper motors - Drive system: Coupled hybrid stepper motors. Dual synchronized rack and pinion drive (Dual Drive) on Y-axis. - Digital Torch Height Control (DTHC) – fast response time for improved cut quality and extended torch consumable life - Direct Cut Control (DCC): Automatic software control of cutting current (amperage) and air pressure directly via the CNC user interface (fully compatible ONLY with Hypertherm Powermax torch & plasma power supply) - Hypertherm plasma system error messages are displayed directly on the Swift-Cut control screen - Collision protection: Magnetic torch breakaway system. Shuts down the system within a fraction of a second in the event of a collision to prevent torch damage. - Proximity sensors for reliable and robust switching operations - Down draft extraction table - Zoned extraction table for efficient fume extraction - Easily removable cutting supports - Freestanding operator’s console with PC and flat panel LCD monitor - Wireless keyboard and mouse - Multiple emergency stop (E-stop) - USB and network connectivity Software: - Solid Edge CAD software - Swift-Cam 1 powered by Libellula; CAD/CAM software - Functions include conversion of any DXF files to Swift-Cut machine code - Manual nesting of parts and standard shapes - Pre-installed cutting tools and image library for consumable recognition - Part library with pre-made standard drawings - Swift-Cut CNC control software - Program simulation - Operating system: Windows 7 Included paid optional accessories: - Swift-Trace camera for capturing hand-drawn templates and converting them into DXF files Kodpoy Snwnofx Ahbonc - Swift-Marker unit – integrated pneumatic marking system. Automatic marking of text, bend lines, and center points - Hypertherm DuraMax plasma torch package Basic dimensions: Console: 650 x 550 mm Machine: 1900 x 1700 mm

Condition: used, Year of construction: 2020, operating hours: 80 h, machine/vehicle number: pr5-3000-08200667, type of cooling: water, Equipment: documentation/manual, Swift-Cut Pro 3000 plasma cutting table. I have not personally operated this machine. The machine is in very good condition. It has been used for very few hours, and I would rate its condition as close to new. The set includes a Hypertherm Powermax 105 power source. Sold without warranty or guarantee. Kedjz Ixzkopfx Ahbjnc

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 962157, type of input current: AC, input voltage: 230 V, overall weight: 3,500 kg, sheet thickness steel (max.): 150 mm, working length: 6,000 mm, protection type (IP code): IP21, cutting speed: 12,000 mm/min, table length: 6,000 mm, table width: 2,000 mm, working width: 2,000 mm, We offer a used plasma and oxy-fuel cutting machine, Varstroj VARCUT 3.2 L2/Ph - 2.5x6.0/1(PL+G). Serial number: 962157 Connection voltage: ~230 V Frequency: 50 Hz Kjdpsz D Tq Esfx Ahbjnc Connection power: max. 2.0 kVA Maximum cutting speed: 12000 mm/min Control: CNC Number of torches: 1+1 Cutting thickness (oxy-fuel): 150 mm Working width: 2000 mm Working length: 6000 mm Cutting gas: Propane butane, air Mechanical protection: IP 21 Total weight: approx. 3500 kg Year of manufacture: 2008 Plasma: TRC-121 OTC Daihen D-12000 30-120A Cutting up to 25 mm thickness with plasma If you have any further questions or require more information, please send us a message or call us.

Condition: like new (used), Year of construction: 2025, operating hours: 150 h, functionality: fully functional, working range: 6,000 mm, sheet thickness (max.): 200 mm, sheet thickness steel (max.): 200 mm, sheet thickness aluminum (max.): 80 mm, cutting height (max.): 200 mm, table length: 6,000 mm, working width: 2,000 mm, table width: 2,000 mm, type of cooling: water, Equipment: documentation/manual, double-sided, MicroStep MasterCut 6001.20PG – 6,000 × 2,000 mm – Plasma + Oxyfuel For sale is a MicroStep MasterCut 6001.20PG CNC plasma/oxyfuel cutting system with a working area of 6,000 × 2,000 mm, manufactured in 2025. Equipped with a Kjellberg SmartFocus 300 fine plasma power source and an additional fully automatic oxyfuel cutting system. The system is designed for processing steel, stainless steel, and aluminum. Key technical specifications: Knjdpfjz Hcr Djx Ahboc - Working area: 6,000 × 2,000 mm - Plasma: up to 80 mm - Oxyfuel: up to 200 mm - Kjellberg SmartFocus 300 Amperes - Fully automatic plasma support - Fully automatic oxyfuel support - Automatic gas consoles - Elevated gantry design - Smart Z movement - Active collision protection - MicroStep control with 24" touchscreen - Asper Basic 2D CAD/CAM - RemoteDiagnostics Included with the system is a Donaldson DFPRE 4-R filter/extraction system with 9.0 kW. The extraction system is explosion-proof and equipped with appropriate ATEX features, making the system suitable for cutting aluminum. The machine has been used very little and is in good condition. Inspection and demonstration under power are possible by appointment.

Condition: good (used), Year of construction: 2016, functionality: fully functional, Well-maintained plasma cutting machine with a 6,000 × 2,000 mm working area, Kjellberg plasma source, and Donaldson Torit DCE extraction system. Manufacturer: MicroStep Model: MasterCut Compact 6001.20P Machine type: Plasma cutting machine Year of manufacture: 2016 Working area: 6,000 × 2,000 mm Knedpjz Hykkofx Ahbjc Plasma source: Kjellberg HiFocus 161 neo Cutting range, sheet thickness: 1–30 mm Extraction system: Donaldson Torit DCE Condition: Good Maintenance: Serviced annually by MicroStep Location: Rottweil The seller can assist with loading.

Condition: used, Year of construction: 1995, functionality: fully functional, USED PLASMA CUTTING TABLE SOITAB 4x2 m, WITH HYPERTHERM MAX 200 GENERATOR, overhauled and with new CNC. MAX THICKNESS 40mm IN STEEL MAX THICKNESS 20mm IN STAINLESS STEEL Kedpfx Ajzh Dg Iohbonc Comes fully overhauled with new CNC checked and installed by the customer, with a training course included. Time to complete the work: 30/40 days. Turnkey price includes used filter but excludes electrical connections and the smoke duct from the filter to the roof.